RESUMEN
Nanofibrous filter materials were prepared by electrospinning a solution of 28 wt% poly(vinylidene fluoride) in N,N-dimethylacetamide with and without the addition of 2 wt% AgNO3, Cu(NO3)2·2.5H2O or ZnCl2. X-ray diffraction, scanning electron microscopy with energy dispersive X-ray spectroscopy, inductively coupled plasma mass spectroscopy, thermogravimetric analysis, contact angle measurement, nitrogen sorption, and mercury intrusion porosimetry methods were used for the characterization of physical structure as well as the chemical composition of the electrospun materials. Particle filtration efficiency and antiviral activity against the SARS-CoV-2 alpha variant were tested in order to estimate the suitability of the prepared electrospun filter materials for application as indoor air filtration systems with virucidal properties. All filter materials prepared with salts demonstrated very high particle filtration efficiency (≥98.0%). The best antiviral activity was demonstrated by a material containing Cu(NO3)2·2.5H2O in the spinning solution, which displayed the decrease in the number of infectious virions by three orders of magnitude after a contact time of 12 h. Materials with the addition of AgNO3 and ZnCl2 decreased the number of infectious virions after the same contact time by only â¼8 and â¼11 times, respectively.
RESUMEN
Formation of new aerosol particles from trace gases is a major source of cloud condensation nuclei (CCN) in the global atmosphere, with potentially large effects on cloud optical properties and Earth's radiative balance. Controlled laboratory experiments have resolved, in detail, the different nucleation pathways likely responsible for atmospheric new particle formation, yet very little is known from field studies about the molecular steps and compounds involved in different regions of the atmosphere. The scarcity of primary particle sources makes secondary aerosol formation particularly important in the Antarctic atmosphere. Here, we report on the observation of ion-induced nucleation of sulfuric acid and ammonia-a process experimentally investigated by the CERN CLOUD experiment-as a major source of secondary aerosol particles over coastal Antarctica. We further show that measured high sulfuric acid concentrations, exceeding 107 molecules cm-3, are sufficient to explain the observed new particle growth rates. Our findings show that ion-induced nucleation is the dominant particle formation mechanism, implying that galactic cosmic radiation plays a key role in new particle formation in the pristine Antarctic atmosphere.
RESUMEN
New particle formation (NPF) is the source of over half of the atmosphere's cloud condensation nuclei, thus influencing cloud properties and Earth's energy balance. Unlike in the planetary boundary layer, few observations of NPF in the free troposphere exist. We provide observational evidence that at high altitudes, NPF occurs mainly through condensation of highly oxygenated molecules (HOMs), in addition to taking place through sulfuric acid-ammonia nucleation. Neutral nucleation is more than 10 times faster than ion-induced nucleation, and growth rates are size-dependent. NPF is restricted to a time window of 1 to 2 days after contact of the air masses with the planetary boundary layer; this is related to the time needed for oxidation of organic compounds to form HOMs. These findings require improved NPF parameterization in atmospheric models.
RESUMEN
The European Ozone Directive 2002/3/EC specifies the analysis of 30 individual C2-C9 hydrocarbons in urban air with the attribution of emission sources to pollution concentrations as a major objective. In the present study, we investigate an approach for source apportionment of these ozone precursor hydrocarbons in urban air based on reliable semi continuous volatile organic compound (VOC) analysis in the field and in vehicle emission laboratory combined with multivariate receptor modeling. The GC system relies on an hourly analytical cycle based on a trap sample enrichment phase followed by a dual column gas chromatographic flame ionisation detector (FID) analysis and has successfully been tested during an air monitoring campaign at an urban site (Milan, Italy, September 2003) and in the vehicle laboratory performing exhaust emission measurements while running driving cycles on a chassis dynamometer (mopeds, gasoline and diesel cars). The receptor modeling relies on two complementary principles. The chemical mass balance (CMB) modeling apportions well characterized source profiles for the 30 individual C2-C9 hydrocarbons in the Ozone Directive to the concentrations in ambient air and produces source contribution estimates (SCE) as output. The positive matrix factorization (PMF) analyses variability in the ambient air concentration data and searches for latent variables consisting of co-varying hydrocarbons and produces profiles as output, which in this study could be attributed to known emission sources. Both CMB and PMF rely on an estimated uncertainty for each input data. A new approach is presented, by which the uncertainty is allowed to float as function of the photochemical reactivity of the atmosphere and the stability of each individual compound.