Operando Nanoscale Imaging of Electrochemically Induced Strain in a Locally Polarized Pt Grain.

Developing new methods that reveal the structure of electrode materials under polarization is key to constructing robust structure-property relationships. However, many existing methods lack the spatial resolution in structural changes and fidelity to electrochemical operating conditions that are needed to probe catalytically relevant structures. Here, we combine a nanopipette electrochemical cell with three-dimensional X-ray Bragg coherent diffractive imaging to study how strain in a single Pt grain evolves in response to applied potential. During polarization, marked changes in surface strain arise from the Coulombic attraction between the surface charge on the electrode and the electrolyte ions in the electrochemical double layers, while the strain in the bulk of the crystal remains unchanged. The concurrent surface redox reactions have a strong influence on the magnitude and nature of the strain changes under polarization. Our studies provide a powerful blueprint to understand how structural evolution influences electrochemical performance at the nanoscale.

A Semicrystalline Furanic Polyamide Made from Renewable Feedstocks.

Semi-aromatic polyamides (SAPs) synthesized from petrochemical diacids and diamines are high-performance polymers that often derive their desirable properties from a high degree of crystallinity. Attempts to develop partially renewable SAPs by replacing petrochemical diacids with biobased furan-2,5-dicarboxylic acid (FDCA) have resulted in amorphous materials or polymers with low melting temperatures. Herein, we report the development of poly(5-aminomethyl-2-furoic acid) (PAMF), a semicrystalline SAP synthesized by the polycondensation of CO2 and lignocellulose-derived monomer 5-aminomethyl-2-furoic acid (AMF). PAMF has glass-transition and melting temperatures comparable to that of commercial materials and higher than that of any previous furanic SAP. Additionally, PAMF can be copolymerized with conventional nylon 6 and is chemically recyclable. Molecular dynamics (MD) simulations suggest that differences in intramolecular hydrogen bonding explain why PAMF is semicrystalline but many FDCA-based SAPs are not.

Microstructural origin of locally enhanced CO2 electroreduction activity on gold.

Understanding how the bulk structure of a material affects catalysis on its surface is critical to the development of actionable catalyst design principles. Bulk defects have been shown to affect electrocatalytic materials that are important for energy conversion systems, but the structural origins of these effects have not been fully elucidated. Here we use a combination of high-resolution scanning electrochemical cell microscopy and electron backscatter diffraction to visualize the potential-dependent electrocatalytic carbon dioxide [Formula: see text] electroreduction and hydrogen [Formula: see text] evolution activity on Au electrodes and probe the effects of bulk defects. Comparing colocated activity maps and videos to the underlying microstructure and lattice deformation supports a model in which CO2 electroreduction is selectively enhanced by surface-terminating dislocations, which can accumulate at grain boundaries and slip bands. Our results suggest that the deliberate introduction of dislocations into materials is a promising strategy for improving catalytic properties.

Carbon dioxide utilization via carbonate-promoted C-H carboxylation.

Using carbon dioxide (CO2) as a feedstock for commodity synthesis is an attractive means of reducing greenhouse gas emissions and a possible stepping-stone towards renewable synthetic fuels. A major impediment to synthesizing compounds from CO2 is the difficulty of forming carbon-carbon (C-C) bonds efficiently: although CO2 reacts readily with carbon-centred nucleophiles, generating these intermediates requires high-energy reagents (such as highly reducing metals or strong organic bases), carbon-heteroatom bonds or relatively acidic carbon-hydrogen (C-H) bonds. These requirements negate the environmental benefit of using CO2 as a substrate and limit the chemistry to low-volume targets. Here we show that intermediate-temperature (200 to 350 degrees Celsius) molten salts containing caesium or potassium cations enable carbonate ions (CO3(2-)) to deprotonate very weakly acidic C-H bonds (pKa > 40), generating carbon-centred nucleophiles that react with CO2 to form carboxylates. To illustrate a potential application, we use C-H carboxylation followed by protonation to convert 2-furoic acid into furan-2,5-dicarboxylic acid (FDCA)--a highly desirable bio-based feedstock with numerous applications, including the synthesis of polyethylene furandicarboxylate (PEF), which is a potential large-scale substitute for petroleum-derived polyethylene terephthalate (PET). Since 2-furoic acid can readily be made from lignocellulose, CO3(2-)-promoted C-H carboxylation thus reveals a way to transform inedible biomass and CO2 into a valuable feedstock chemical. Our results provide a new strategy for using CO2 in the synthesis of multi-carbon compounds.

Electroreduction of carbon monoxide to liquid fuel on oxide-derived nanocrystalline copper.

The electrochemical conversion of CO2 and H2O into liquid fuel is ideal for high-density renewable energy storage and could provide an incentive for CO2 capture. However, efficient electrocatalysts for reducing CO2 and its derivatives into a desirable fuel are not available at present. Although many catalysts can reduce CO2 to carbon monoxide (CO), liquid fuel synthesis requires that CO is reduced further, using H2O as a H(+) source. Copper (Cu) is the only known material with an appreciable CO electroreduction activity, but in bulk form its efficiency and selectivity for liquid fuel are far too low for practical use. In particular, H2O reduction to H2 outcompetes CO reduction on Cu electrodes unless extreme overpotentials are applied, at which point gaseous hydrocarbons are the major CO reduction products. Here we show that nanocrystalline Cu prepared from Cu2O ('oxide-derived Cu') produces multi-carbon oxygenates (ethanol, acetate and n-propanol) with up to 57% Faraday efficiency at modest potentials (-0.25 volts to -0.5 volts versus the reversible hydrogen electrode) in CO-saturated alkaline H2O. By comparison, when prepared by traditional vapour condensation, Cu nanoparticles with an average crystallite size similar to that of oxide-derived copper produce nearly exclusive H2 (96% Faraday efficiency) under identical conditions. Our results demonstrate the ability to change the intrinsic catalytic properties of Cu for this notoriously difficult reaction by growing interconnected nanocrystallites from the constrained environment of an oxide lattice. The selectivity for oxygenates, with ethanol as the major product, demonstrates the feasibility of a two-step conversion of CO2 to liquid fuel that could be powered by renewable electricity.

Electrostatic Control of Regioselectivity in Au(I)-Catalyzed Hydroarylation.

Competing pathways in catalytic reactions often involve transition states with very different charge distributions, but this difference is rarely exploited to control selectivity. The proximity of a counterion to a charged catalyst in an ion paired complex gives rise to strong electrostatic interactions that could be used to energetically differentiate transition states. Here we investigate the effects of ion pairing on the regioselectivity of the hydroarylation of 3-substituted phenyl propargyl ethers catalyzed by cationic Au(I) complexes, which forms a mixture of 5- and 7-substituted 2H-chromenes. We show that changing the solvent dielectric to enforce ion pairing to a SbF6- counterion changes the regioselectivity by up to a factor of 12 depending on the substrate structure. Density functional theory (DFT) is used to calculate the energy difference between the putative product-determining isomeric transition states (ΔΔE‡) in both the presence and absence of the counterion. The change in ΔΔE‡ upon switching from the unpaired transition states in high solvent dielectric to ion paired transition states in low solvent dielectric (Δ(ΔΔE‡)) was found to be in good agreement with the experimentally observed selectivity changes across several substrates. Our calculations indicate that the origin of Δ(ΔΔE‡) lies in the preferential electrostatic stabilization of the transition state with greater charge separation by the counterion in the ion paired case. By performing calculations at multiple different values of the solvent dielectric, we show that the role of the solvent in changing selectivity is not solely to enforce ion pairing, but rather that interactions between the ion paired complex and the solvent also contribute to Δ(ΔΔE‡). Our results provide a foundation for exploiting electrostatic control of selectivity in other ion paired systems.

Pd-catalyzed electrohydrogenation of carbon dioxide to formate: high mass activity at low overpotential and identification of the deactivation pathway.

Electrochemical reduction of CO2 to formate (HCO2(-)) powered by renewable electricity is a possible carbon-negative alternative to synthesizing formate from fossil fuels. This process is energetically inefficient because >1 V of overpotential is required for CO2 reduction to HCO2(-) on the metals currently used as cathodic catalysts. Pd reduces CO2 to HCO2(-) with no overpotential, but this activity has previously been limited to low synthesis rates and plagued by an unidentified deactivation pathway. Here we show that Pd nanoparticles dispersed on a carbon support reach high mass activities (50-80 mA HCO2(-) synthesis per mg Pd) when driven by less than 200 mV of overpotential in aqueous bicarbonate solutions. Electrokinetic measurements are consistent with a mechanism in which the rate-determining step is the addition of electrochemically generated surface adsorbed hydrogen to CO2 (i.e., electrohydrogenation). The electrodes deactivate over the course of several hours because of a minor pathway that forms CO. Activity is recovered, however, by removing CO with brief air exposure.

Grain-boundary-dependent CO2 electroreduction activity.

Uncovering new structure-activity relationships for metal nanoparticle (NP) electrocatalysts is crucial for advancing many energy conversion technologies. Grain boundaries (GBs) could be used to stabilize unique active surfaces, but a quantitative correlation between GBs and catalytic activity has not been established. Here we use vapor deposition to prepare Au NPs on carbon nanotubes (Au/CNT). As deposited, the Au NPs have a relatively high density of GBs that are readily imaged by transmission electron microscopy (TEM); thermal annealing lowers the density in a controlled manner. We show that the surface-area-normalized activity for CO2 reduction is linearly correlated with GB surface density on Au/CNT, demonstrating that GB engineering is a powerful approach to improving the catalytic activity of metal NPs.

Probing the Active Surface Sites for CO Reduction on Oxide-Derived Copper Electrocatalysts.

CO electroreduction activity on oxide-derived Cu (OD-Cu) was found to correlate with metastable surface features that bind CO strongly. OD-Cu electrodes prepared by H2 reduction of Cu2O precursors reduce CO to acetate and ethanol with nearly 50% Faradaic efficiency at moderate overpotential. Temperature-programmed desorption of CO on OD-Cu revealed the presence of surface sites with strong CO binding that are distinct from the terraces and stepped sites found on polycrystalline Cu foil. After annealing at 350 °C, the surface-area corrected current density for CO reduction is 44-fold lower and the Faradaic efficiency is less than 5%. These changes are accompanied by a reduction in the proportion of strong CO binding sites. We propose that the active sites for CO reduction on OD-Cu surfaces are strong CO binding sites that are supported by grain boundaries. Uncovering these sites is a first step toward understanding the surface chemistry necessary for efficient CO electroreduction.

Alkaline O2 reduction on oxide-derived Au: high activity and 4e¯ selectivity without (100) facets.

Gold films produced from gold oxide precursors ("oxide-derived Au") were compared to polyhedral Au nanoparticles for electrocatalytic alkaline O2 reduction. Despite having no detectable abundance of (100) facets, oxide-derived Au exhibited 4e(-) selectivity and surface-area-normalized activity that rivaled cubic Au nanoparticles with high (100) abundance. The activity of oxide-derived Au likely arises from active sites at the surface terminations of defects that are trapped during gold oxide reduction.

Interfacial electric field effects on a carbene reaction catalyzed by Rh porphyrins.

An intramolecular reaction catalyzed by Rh porphyrins was studied in the presence of interfacial electric fields. 1-Diazo-3,3-dimethyl-5-phenylhex-5-en-2-one (2) reacts with Rh porphyrins via a putative carbenoid intermediate to form cyclopropanation product 3,3-dimethyl-5-phenylbicyclo[3.1.0]hexan-2-one (3) and insertion product 3,3-dimethyl-2,3-dihydro-[1,1'-biphenyl]-4(1H)-one (4). To study this reaction in the presence of an interfacial electric field, Si electrodes coated with thin films of insulating dielectric layers were used as the opposing walls of a reaction vessel, and Rh porphyrin catalysts were localized to the dielectric-electrolyte interface. The charge density was varied at the interface by changing the voltage across the two electrodes. The product ratio was analyzed as a function of the applied voltage and the surface chemistry of the dielectric layer. In the absence of an applied voltage, the ratio of 3:4 was approximately 10:1. With a TiO2 surface, application of a voltage induced a Rh porphyrin-TiO2 interaction that resulted in an increase in the 3:4 ratio to a maximum in which 4 was nearly completely suppressed (>100:1). With an Al2O3 surface or an alkylphosphonate-coated surface, the voltage caused a decrease in the 3:4 ratio, with a maximum effect of lowering the ratio to 1:2. The voltage-induced decrease in the 3:4 ratio in the absence of TiO2 was consistent with a field-dipole effect that changed the difference in activation energies for the product-determining step to favor product 4. Effects were observed for porphyrin catalysts localized to the electrode-electrolyte interface either through covalent attachment or surface adsorption, enabling the selectivity to be controlled with unfunctionalized Rh porphyrins. The magnitude of the selectivity change was limited by the maximum interfacial charge density that could be attained before dielectric breakdown.

Tin oxide dependence of the CO2 reduction efficiency on tin electrodes and enhanced activity for tin/tin oxide thin-film catalysts.

The importance of tin oxide (SnO(x)) to the efficiency of CO(2) reduction on Sn was evaluated by comparing the activity of Sn electrodes that had been subjected to different pre-electrolysis treatments. In aqueous NaHCO(3) solution saturated with CO(2), a Sn electrode with a native SnO(x) layer exhibited potential-dependent CO(2) reduction activity consistent with previously reported activity. In contrast, an electrode etched to expose fresh Sn(0) surface exhibited higher overall current densities but almost exclusive H(2) evolution over the entire 0.5 V range of potentials examined. Subsequently, a thin-film catalyst was prepared by simultaneous electrodeposition of Sn(0) and SnO(x) on a Ti electrode. This catalyst exhibited up to 8-fold higher partial current density and 4-fold higher faradaic efficiency for CO(2) reduction than a Sn electrode with a native SnO(x) layer. Our results implicate the participation of SnO(x) in the CO(2) reduction pathway on Sn electrodes and suggest that metal/metal oxide composite materials are promising catalysts for sustainable fuel synthesis.

An electric field-induced change in the selectivity of a metal oxide-catalyzed epoxide rearrangement.

The rearrangement of cis-stilbene oxide catalyzed by Al(2)O(3) was studied in the presence of interfacial electric fields. Thin films of Al(2)O(3) deposited on Si electrodes were used as the opposing walls of a reaction vessel. Application of a voltage across the electrodes engendered electrochemical double layer formation at the Al(2)O(3)-solution interface. The aldehyde to ketone product ratio of the rearrangement was increased by up to a factor of 63 as the magnitude of the double layer charge density was increased. The results support a field-dipole effect on the selectivity of the catalytic reaction.

Aqueous CO2 reduction at very low overpotential on oxide-derived Au nanoparticles.

Carbon dioxide reduction is an essential component of many prospective technologies for the renewable synthesis of carbon-containing fuels. Known catalysts for this reaction generally suffer from low energetic efficiency, poor product selectivity, and rapid deactivation. We show that the reduction of thick Au oxide films results in the formation of Au nanoparticles ("oxide-derived Au") that exhibit highly selective CO(2) reduction to CO in water at overpotentials as low as 140 mV and retain their activity for at least 8 h. Under identical conditions, polycrystalline Au electrodes and several other nanostructured Au electrodes prepared via alternative methods require at least 200 mV of additional overpotential to attain comparable CO(2) reduction activity and rapidly lose their activity. Electrokinetic studies indicate that the improved catalysis is linked to dramatically increased stabilization of the CO(2)(•-) intermediate on the surfaces of the oxide-derived Au electrodes.

CO2 reduction at low overpotential on Cu electrodes resulting from the reduction of thick Cu2O films.

Modified Cu electrodes were prepared by annealing Cu foil in air and electrochemically reducing the resulting Cu(2)O layers. The CO(2) reduction activities of these electrodes exhibited a strong dependence on the initial thickness of the Cu(2)O layer. Thin Cu(2)O layers formed by annealing at 130 °C resulted in electrodes whose activities were indistinguishable from those of polycrystalline Cu. In contrast, Cu(2)O layers formed at 500 °C that were ≥~3 µm thick resulted in electrodes that exhibited large roughness factors and required 0.5 V less overpotential than polycrystalline Cu to reduce CO(2) at a higher rate than H(2)O. The combination of these features resulted in CO(2) reduction geometric current densities >1 mA/cm(2) at overpotentials <0.4 V, a higher level of activity than all previously reported metal electrodes evaluated under comparable conditions. Moreover, the activity of the modified electrodes was stable over the course of several hours, whereas a polycrystalline Cu electrode exhibited deactivation within 1 h under identical conditions. The electrodes described here may be particularly useful for elucidating the structural properties of Cu that determine the distribution between CO(2) and H(2)O reduction and provide a promising lead for the development of practical catalysts for electrolytic fuel synthesis.

Hypophosphite addition to alkenes under solvent-free and non-acidic aqueous conditions.

Hypophosphite adds to alkenes in high yields under solvent-free conditions at elevated temperature, including α,ß-unsaturated carboxylates. The reaction proceeds by a radical mediated pathway. Hypophosphite addition is also effective under non-acidic aqueous conditions employing radical initiators. These methods complement other hypophosphite addition reactions and simplify the synthesis of polyfunctional H-phosphinates.

A framework for automated structure elucidation from routine NMR spectra.

Methods to automate structure elucidation that can be applied broadly across chemical structure space have the potential to greatly accelerate chemical discovery. NMR spectroscopy is the most widely used and arguably the most powerful method for elucidating structures of organic molecules. Here we introduce a machine learning (ML) framework that provides a quantitative probabilistic ranking of the most likely structural connectivity of an unknown compound when given routine, experimental one dimensional 1H and/or 13C NMR spectra. In particular, our ML-based algorithm takes input NMR spectra and (i) predicts the presence of specific substructures out of hundreds of substructures it has learned to identify; (ii) annotates the spectrum to label peaks with predicted substructures; and (iii) uses the substructures to construct candidate constitutional isomers and assign to them a probabilistic ranking. Using experimental spectra and molecular formulae for molecules containing up to 10 non-hydrogen atoms, the correct constitutional isomer was the highest-ranking prediction made by our model in 67.4% of the cases and one of the top-ten predictions in 95.8% of the cases. This advance will aid in solving the structure of unknown compounds, and thus further the development of automated structure elucidation tools that could enable the creation of fully autonomous reaction discovery platforms.

Mechanistic studies of the oxygen evolution reaction by a cobalt-phosphate catalyst at neutral pH.

The mechanism of the oxygen evolution reaction (OER) by catalysts prepared by electrodepositions from Co(2+) solutions in phosphate electrolytes (Co-Pi) was studied at neutral pH by electrokinetic and (18)O isotope experiments. Low-potential electrodepositions enabled the controlled preparation of ultrathin Co-Pi catalyst films (<100 nm) that could be studied kinetically in the absence of mass transport and charge transport limitations to the OER. The Co-Pi catalysts exhibit a Tafel slope approximately equal to 2.3 × RT/F for the production of oxygen from water in neutral solutions. The electrochemical rate law exhibits an inverse first order dependence on proton activity and a zeroth order dependence on phosphate for [Pi] ≥ 0.03 M. In the absence of phosphate buffer, the Tafel slope is increased ∼3-fold and the overall activity is greatly diminished. Together, these electrokinetic studies suggest a mechanism involving a rapid, one electron, one proton equilibrium between Co(III)-OH and Co(IV)-O in which a phosphate species is the proton acceptor, followed by a chemical turnover-limiting process involving oxygen-oxygen bond coupling.

Structure and valency of a cobalt-phosphate water oxidation catalyst determined by in situ X-ray spectroscopy.

A water oxidation catalyst generated via electrodeposition from aqueous solutions containing phosphate and Co(2+) (Co-Pi) has been studied by in situ X-ray absorption spectroscopy. Spectra were obtained for Co-Pi films of two different thicknesses at an applied potential supporting water oxidation catalysis and at open circuit. Extended X-ray absorption fine structure (EXAFS) spectra indicate the presence of bis-oxo/hydroxo-bridged Co subunits incorporated into higher nuclearity clusters in Co-Pi. The average cluster nuclearity is greater in a relatively thick film (∼40-50 nmol Co ions/cm(2)) deposited at 1.25 V vs NHE than in an extremely thin film (∼3 nmol Co ions/cm(2)) deposited at 1.1 V. X-ray absorption near edge structure (XANES) spectra and electrochemical data support a Co valency greater than 3 for both Co-Pi samples when catalyzing water oxidation at 1.25 V. Upon switching to open circuit, Co-Pi undergoes a continuous reduction due to residual water oxidation catalysis, as indicated by the negative shift of the edge energy. The rate of reduction depends on the average cluster size. On the basis of structural parameters extracted from fits to the EXAFS data of Co-Pi with two different thicknesses and comparisons with EXAFS spectra of Co oxide compounds, a model is proposed wherein the Co oxo/hydroxo clusters of Co-Pi are composed of edge-sharing CoO(6) octahedra, the structural motif found in cobaltates. Whereas cobaltates contain extended planes of CoO(6) octahedra, the Co-Pi clusters are of molecular dimensions.

Reaction discovery enabled by DNA-templated synthesis and in vitro selection.

Current approaches to reaction discovery focus on one particular transformation. Typically, researchers choose substrates based on their predicted ability to serve as precursors for the target structure, then evaluate reaction conditions for their ability to effect product formation. This approach is ideal for addressing specific reactivity problems, but its focused nature might leave many areas of chemical reactivity unexplored. Here we report a reaction discovery approach that uses DNA-templated organic synthesis and in vitro selection to simultaneously evaluate many combinations of different substrates for bond-forming reactions in a single solution. Watson-Crick base pairing controls the effective molarities of substrates tethered to DNA strands; bond-forming substrate combinations are then revealed using in vitro selection for bond formation, PCR amplification and DNA microarray analysis. Using this approach, we discovered an efficient and mild carbon-carbon bond-forming reaction that generates an enone from an alkyne and alkene using an inorganic palladium catalyst. Although this approach is restricted to conditions and catalysts that are at least partially compatible with DNA, we expect that its versatility and efficiency will enable the discovery of additional reactions between a wide range of substrates.