Insertion of CO2 in metal ion-doped two-dimensional covalent organic frameworks.

Carbon capture is one of the essential low-carbon technologies required to achieve societal climate goals at the lowest cost. Covalent organic frameworks (COFs) are promising adsorbents for CO2 capture because of their well-defined porosity, large surface area, and high stability. Current COF-based CO2 capture is mainly based on a physisorption mechanism, exhibiting smooth and reversible sorption isotherms. In the present study, we report unusual CO2 sorption isotherms featuring one or more tunable hysteresis steps with metal ion (Fe3+, Cr3+, or In3+)-doped Schiff-base two-dimensional (2D) COFs (Py-1P, Py-TT, and Py-Py) as adsorbents. Synchrotron X-ray diffraction, spectroscopic and computational studies indicate that the sharp adsorption steps in the isotherm originate from the insertion of CO2 between the metal ion and the N atom of the imine bond on the inner pore surface of the COFs as the CO2 pressure reaches threshold values. As a result, the CO2 adsorption capacity of the ion-doped Py-1P COF is increased by 89.5% compared with that of the undoped Py-1P COF. This CO2 sorption mechanism provides an efficient and straightforward approach to enhancing the CO2 capture capacity of COF-based adsorbents, yielding insights into developing chemistry for CO2 capture and conversion.

Covalent organic framework atropisomers with multiple gas-triggered structural flexibilities.

Covalent organic frameworks (COFs) are emerging crystalline porous polymers, showing great potential for applications but lacking gas-triggered flexibility. Atropisomerism was experimentally discovered in 1922 but has rarely been found in crystals with infinite framework structures. Here we report atropisomerism in COF single crystals. The obtained COF atropisomers, namely COF-320 and COF-320-A, have identical chemical and interpenetrated structures but differ in the spatial arrangement of repeating units. In contrast to the rigid COF-320 structure, its atropisomer (COF-320-A) exhibits unconventional gas sorption behaviours with one or more sorption steps in isotherms at different temperatures. Single-crystal structures determined from continuous rotation electron diffraction and in situ powder X-ray diffraction demonstrate that these adsorption steps originate from internal pore expansion with or without changing the crystal space group. COF-320-A recognizes different gases by expanding its internal pores continuously (crystal-to-amorphous transition) or discontinuously (crystal-to-crystal transition) or having mixed transition styles, distinguishing COF-320-A from existing soft/flexible porous crystals. These findings extend atropisomerism from molecules to crystals and propel COFs into the covalently linked soft porous crystal regime, further advancing applications of soft porous crystals in gas sorption, separation and storage.

Exclusive Recognition of CO2 from Hydrocarbons by Aluminum Formate with Hydrogen-Confined Pore Cavities.

Exclusive capture of carbon dioxide (CO2) from hydrocarbons via adsorptive separation is an important technology in the petrochemical industry, especially for acetylene (C2H2) production. However, the physicochemical similarities between CO2 and C2H2 hamper the development of CO2-preferential sorbents, and CO2 is mainly discerned via C recognition with low efficiency. Here, we report that the ultramicroporous material Al(HCOO)3, ALF, can exclusively capture CO2 from hydrocarbon mixtures, including those containing C2H2 and CH4. ALF shows a remarkable CO2 capacity of 86.2 cm3 g-1 and record-high CO2/C2H2 and CO2/CH4 uptake ratios. The inverse CO2/C2H2 separation and exclusive CO2 capture performance from hydrocarbons are validated via adsorption isotherms and dynamic breakthrough experiments. Notably, the hydrogen-confined pore cavities with appropriate dimensional size provide an ideal pore chemistry to specifically match CO2 via a hydrogen bonding mechanism, with all hydrocarbons rejected. This molecular recognition mechanism is unveiled by in situ Fourier-transform infrared spectroscopy, X-ray diffraction studies, and molecular simulations.

Efficient Adsorption of Acetylene over CO2 in Bioinspired Covalent Organic Frameworks.

Rational design of covalent organic frameworks (COFs) to broaden their diversity is highly desirable but challenging due to the limited, expensive, and complex building blocks, especially compared with other easily available porous materials. In this work, we fabricated two novel bioinspired COFs, namely, NUS-71 and NUS-72, using reticular chemistry with ellagic acid and triboronic acid-based building blocks. Both COFs with AB stacking mode exhibit high acetylene (C2H2) adsorption capacity and excellent separation performance for C2H2/CO2 mixtures, which is significant but rarely explored using COFs. The impressive affinities for C2H2 appear to be related to the sandwich structure formed by C2H2 and the host framework via multiple host-guest interactions. This work not only represents a new avenue for the construction of low-cost COFs but also expands the variety of the COF family using natural biochemicals as building blocks for broad application.

Aggregated Structures of Two-Dimensional Covalent Organic Frameworks.

Covalent organic frameworks (COFs) have found wide applications due to their crystalline structures. However, it is still challenging to quantify crystalline phases in a COF sample. This is because COFs, especially 2D ones, are usually obtained as mixtures of polycrystalline powders. Therefore, the understanding of the aggregated structures of 2D COFs is of significant importance for their efficient utilization. Here we report the study of the aggregated structures of 2D COFs using 13C solid-state nuclear magnetic resonance (13C SSNMR). We find that 13C SSNMR can distinguish different aggregated structures in a 2D COF because COF layer stacking creates confined spaces that enable intimate interactions between atoms/groups from adjacent layers. Subsequently, the chemical environments of these atoms/groups are changed compared with those of the nonstacking structures. Such a change in the chemical environment is significant enough to be captured by 13C SSNMR. After analyzing four 2D COFs, we find it particularly useful for 13C SSNMR to quantitatively distinguish the AA stacking structure from other aggregated structures. Additionally, 13C SSNMR data suggest the existence of offset stacking structures in 2D COFs. These offset stacking structures are not long-range-ordered and are eluded from X-ray-based detections, and thus they have not been reported before. In addition to the dried state, the aggregated structures of solvated 2D COFs are also studied by 13C SSNMR, showing that 2D COFs have different aggregated structures in dried versus solvated states. These results represent the first quantitative study on the aggregated structures of 2D COFs, deepen our understanding of the structures of 2D COFs, and further their applications.

Tunable Interlayer Shifting in Two-Dimensional Covalent Organic Frameworks Triggered by CO2 Sorption.

Two-dimensional covalent organic frameworks (2D COFs) have been widely viewed as rigid porous materials with smooth and reversible gas sorption isotherms. In the present study, we report an unusual hysteresis step in the CO2 adsorption isotherm of a 2D COF, TAPB-OMeTA. In situ powder X-ray diffraction (PXRD) measurements, computational modeling, and Pawley refinement indicate that TAPB-OMeTA experiences slight interlayer shifting during the CO2 adsorption process, resulting in a new structure that is similar but not identical to the AA stacking structure, namely, a quasi-AA stacking structure. This interlayer shifting is responsible for the step in its CO2 adsorption isotherm. We attribute the interlayer shifting to the interactions between COF and CO2, which weaken the attraction strength between adjacent COF layers. Notably, the repulsion force between the methoxy groups on the backbone of TAPB-OMeTA is essential in facilitating the interlayer shifting process. After further increasing the size of side groups by grafting poly(N-isopropylacrylamide) oligomers to the TAPB-OMeTA backbone via surface-initiated atom transfer radical polymerization (SI-ATRP), we observed a second interlayer shifting and two adsorption steps in the CO2 adsorption isotherm, suggesting tunability of the interlayer shifting process. Density functional theory (DFT) calculations confirm that the quasi-AA stacking structure is energetically preferred over AA stacking under a CO2 atmosphere. These findings demonstrate that 2D COFs can be "soft" porous materials when interacting with gases, providing new opportunities for 2D COFs in gas storage and separation.

Efficient Splitting of Alkane Isomers by a Bismuth-Based Metal-Organic Framework with Auxetic Reentrant Pore Structures.

The isolation of di-branched alkanes from their isomers is vital in gasoline upgrading to achieve high octane numbers but is significantly challenging and energy-intensive. Here, we report the highly efficient separation of hexane isomers by combing molecular recognition and size-sieving in a bismuth-based MOF, UU-200. The unique auxetic structure with reentrant honeycomb-like pore cavities connected by narrow pore windows endows UU-200 with a complete rejection of di-branched alkanes and high capacities for linear and mono-branched isomers. The molecular sieving effect, unprecedented separation selectivities, and excellent efficiencies are proved via adsorption isotherms and breakthrough experiments with high research octane numbers obtained (>96), indicating a benchmark for alkane separation under ambient conditions. The molecular recognition mechanism was unveiled by theoretical simulation and in situ Fourier-transform infrared spectroscopy.

Multivariate Polycrystalline Metal-Organic Framework Membranes for CO2/CH4 Separation.

Membrane technology is attractive for natural gas separation (removing CO2, H2O, and hydrocarbons from CH4) because of membranes' low energy consumption and small environmental footprint. Compared to polymeric membranes, microporous inorganic membranes such as silicoaluminophosphate-34 (SAPO-34) membrane can retain their separation performance under conditions close to industrial requirements. However, moisture and hydrocarbons in natural gas can be strongly adsorbed in the pores of those membranes, thereby reducing the membrane separation performance. Herein, we report the fabrication of a polycrystalline MIL-160 membrane on an Al2O3 substrate by in situ hydrothermal synthesis. The MIL-160 membrane with a thickness of ca. 3 µm shows a remarkable molecular sieving effect in gas separation. Besides, the pore size and environment of the MIL-160 membrane can be precisely controlled using reticular chemistry by regulating the size and functionality of the ligand. Interestingly, the more polar fluorine-functionalized multivariate MIL-160/CAU-10-F membrane exhibits a 10.7% increase in selectivity for CO2/CH4 separation and a 31.2% increase in CO2 permeance compared to those of the MIL-160 membrane. In addition, hydrophobic MIL-160 membranes and MIL-160/CAU-10-F membranes are more resistant to water vapor and hydrocarbons than the hydrophilic SAPO-34 membranes.

Optimal Pore Chemistry in an Ultramicroporous Metal-Organic Framework for Benchmark Inverse CO2 /C2 H2 Separation.

Isolation of CO2 from acetylene (C2 H2 ) via CO2 -selective sorbents is an energy-efficient technology for C2 H2 purification, but a strategic challenge due to their similar physicochemical properties. There is still no specific methodology for constructing sorbents that preferentially trap CO2 over C2 H2 . We report an effective strategy to construct optimal pore chemistry in a CeIV -based ultramicroporous metal-organic framework CeIV -MIL-140-4F, based on charge-transfer effects, for efficient inverse CO2 /C2 H2 separation. The ligand-to-metal cluster charge transfer is facilitated by CeIV with low-lying unoccupied 4f orbitals and electron-withdrawing F atoms functionalized tetrafluoroterephthalate, affording a perfect pore environment to match CO2 . The exceptional CO2 uptake (151.7 cm3 cm-3 ) along with remarkable separation selectivities (above 40) set a new benchmark for inverse CO2 /C2 H2 separation, which is verified via simulated and experimental breakthrough experiments. The unique CO2 recognition mechanism is further unveiled by in situ powder X-ray diffraction experiments, Fourier-transform infrared spectroscopy measurements, and molecular calculations.

Interlayer Shifting in Two-Dimensional Covalent Organic Frameworks.

Layer-stacking structures are very common in two-dimensional covalent organic frameworks (2D COFs). While their structures are normally determined under solvent-free conditions, the structures of solvated 2D COFs are largely unexplored. We report herein the in situ determination of solvated 2D COF structures, which exhibit an obvious difference as compared to that of the same COF under dried state. Powder X-ray diffraction (PXRD) data analyses, computational modeling, and Pawley refinement indicate that the solvated 2D COFs experience considerable interlayer shifting, resulting in new structures similar to the staggered AB stacking, namely, quasi-AB-stacking structures, instead of the AA-stacking structures that are usually observed in the dried COFs. We attribute this interlayer shifting to the interactions between COFs and solvent molecules, which may weaken the attraction strength between adjacent COF layers. Density functional theory (DFT) calculations confirm that the quasi-AB stacking is energetically preferred over the AA stacking in solvated COFs. All four highly crystalline 2D COFs examined in the present study exhibit considerable interlayer shifting upon solvation, implying the universality of the solvent-induced interlayer stacking rearrangement in 2D COFs. These findings prompt re-examination of the 2D COF structures in solvated state and suggest new opportunities for the applications of COF materials under wet conditions.

Efficient Trapping of Trace Acetylene from Ethylene in an Ultramicroporous Metal-Organic Framework: Synergistic Effect of High-Density Open Metal and Electronegative Sites.

Acetylene (C2 H2 ) removal from ethylene (C2 H4 ) is a crucial step in the production of polymer-grade C2 H4 but remains a daunting challenge because of the similar physicochemical properties of C2 H2 and C2 H4 . Currently energy-intensive cryogenic distillation processes are used to separate the two gases industrially. A robust ultramicroporous metal-organic framework (MOF), Ni3 (pzdc)2 (7 Hade)2 , is reported for efficient C2 H2 /C2 H4 separation. The MOF comprises hydrogen-bonded linked one-dimensional (1D) chains, and features high-density open metal sites (2.7 nm-3 ) and electronegative oxygen and nitrogen sites arranged on the pore surface as cooperative binding sites. Theoretical calculations, in situ powder X-ray diffraction and Fourier-transform infrared spectroscopy revealed a synergistic adsorption mechanism. The MOF possesses S-shaped 1D pore channels that efficiently trap trace C2 H2 at 0.01 bar with a high C2 H2 uptake of 60.6 cm3 cm-3 and C2 H2 /C2 H4 selectivity.

A Diversity of Asymmetric Nano-/Microcolloidal Architectures Grown by ATRP from Janus Seeds.

The fabrication of colloids has witnessed significant progress during the last decade, however, fabrication of anisotropic colloidal particles with complex geometries still represents a challenging task. Here, we present nano-/micro-sized colloidal architectures which 'grow' directly from nanoparticle seeds by controlled radical polymerization, resembling the growth of plants from seeds in the natural world. Specifically, we use the atom transfer radical polymerization (ATRP) technique to grow colloidal architectures from snowman-shaped Janus nanoparticle seeds (JNPS). The key to this synthetic approach is the asymmetric placement of the ATRP initiators in the bulk of one JNPS lobe. By starting the polymerization, monomers continuously add to the initiator containing the JNPS lobe, which subsequently grows into a larger colloidal structure. By controlling growth conditions mainly through the interaction strength between the monomer and JNPS, a variety of colloidal architectures result, for example, dish-, basket, cocoon-, flower-, helmet- mushroom-, dumpling and pumpkin-like geometries. Furthermore, each of these grown architectures have different surface morphologies, including smooth-, island- and grouped island nanostructures. The present work provides an alternative method to the synthesis of anisotropic particles with complex geometries and tunable surface morphologies, thus enriching the toolbox for the colloid synthesis.

Temperature-dependent rearrangement of gas molecules in ultramicroporous materials for tunable adsorption of CO2 and C2H2.

The interactions between adsorbed gas molecules within porous metal-organic frameworks are crucial to gas selectivity but remain poorly explored. Here, we report the modulation of packing geometries of CO2 and C2H2 clusters within the ultramicroporous CUK-1 material as a function of temperature. In-situ synchrotron X-ray diffraction reveals a unique temperature-dependent reversal of CO2 and C2H2 adsorption affinities on CUK-1, which is validated by gas sorption and dynamic breakthrough experiments, affording high-purity C2H2 (99.95%) from the equimolar mixture of C2H2/CO2 via a one-step purification process. At low temperatures (<253 K), CUK-1 preferentially adsorbs CO2 with both high selectivity (>10) and capacity (170 cm3 g-1) owing to the formation of CO2 tetramers that simultaneously maximize the guest-guest and host-guest interactions. At room temperature, conventionally selective adsorption of C2H2 is observed. The selectivity reversal, structural robustness, and facile regeneration of CUK-1 suggest its potential for producing high-purity C2H2 by temperature-swing sorption.

Growing single crystals of two-dimensional covalent organic frameworks enabled by intermediate tracing study.

Resolving single-crystal structures of two-dimensional covalent organic frameworks (2D COFs) is a great challenge, hindered in part by limited strategies for growing high-quality crystals. A better understanding of the growth mechanism facilitates development of methods to grow high-quality 2D COF single crystals. Here, we take a different perspective to explore the 2D COF growth process by tracing growth intermediates. We discover two different growth mechanisms, nucleation and self-healing, in which self-assembly and pre-arrangement of monomers and oligomers are important factors for obtaining highly crystalline 2D COFs. These findings enable us to grow micron-sized 2D single crystalline COF Py-1P. The crystal structure of Py-1P is successfully characterized by three-dimensional electron diffraction (3DED), which confirms that Py-1P does, in part, adopt the widely predicted AA stacking structure. In addition, we find the majority of Py-1P crystals (>90%) have a previously unknown structure, containing 6 stacking layers within one unit cell.

Self-Assembly of Janus Nanoparticles into Transformable Suprastructures.

One of the greatest challenges in colloidal self-assembly is to obtain multiple distinct but transformable suprastructures from the same particles in monophasic solvent. Here, we combined deformable and rigid lobes in snowman-shaped amphiphilic Janus nanoparticles (JNPs). These JNPs exhibited excellent ability to self-assemble into micelles, worms, mini-capsules, giant- and elongated-vesicles. This rich suprastructural diversity was obtained by kinetic manipulation of the self-assembly conditions. The suprastructures consist of four to thousands of highly oriented JNPs with dimensions ranging from 500-nanometer to 30-µm. Moreover, the suprastructures can be transformed into one another or dissembled into individual particles. These features make colloidal assembly highly comparable to that of amphiphilic molecules, however, key differences were discovered.

Influence of Geometries on the Assembly of Snowman-Shaped Janus Nanoparticles.

The self-assembly of micro/nanoparticles into suprastructures is a promising way to develop reconfigurable materials and to gain insights into the fundamental question of how matter organizes itself. The geometry of particles, especially those deviating from perfectly spherical shapes, is of significant importance in colloidal assembly because it influences the particle "recognition", determines the particle packing, and ultimately dictates the formation of assembled suprastructures. In order to organize particles into desired structures, it is of vital importance to understand the relationship between the shape of the colloidal building blocks and the assembled suprastructures. This fundamental issue is an enduring topic in the assembly of molecular surfactants, but it remained elusive in colloidal assembly. To address this issue, we use snowman-shaped Janus nanoparticles (JNPs) as a model to systematically study the effect of colloidal geometries on their assembled suprastructures. Ten types of JNPs with identical chemical compositions but with different geometries were synthesized. Specifically, the synthesized JNPs differ in their lobe size ratios, phase separation degrees, and overall sizes. We show that by altering these parameters, both finite suprastructures, such as capsules with different curvatures, and nonfinite suprastructures, including free-standing single-layered or double-layered JNPs sheets, can be obtained via self-assembly. All these different types of suprastructures are constituted by highly oriented and hexagonally packed JNPs. These findings demonstrate the significance of geometries in colloidal assembly, such that slightly changing the building block geometries could result in a large variety of very different assembled structures, without altering the chemistry of the particles.

Combined Experimental and Simulation Studies of Cross-Linked Polymer Brushes under Shear.

We have studied the effect of cross-linking on the tribological behavior of polymer brushes using a combined experimental and theoretical approach. Tribological and indentation measurements on poly(glycidyl methacrylate) brushes and gels in the presence of dimethylformamide solvent were obtained by means of atomic force microscopy. To complement experiments, we have performed corresponding molecular dynamics (MD) simulations of a generic bead-spring model in the presence of explicit solvent and cross-linkers. Our study shows that cross-linking leads to an increase in friction between polymer brushes and a counter-surface. The coefficient of friction increases with increasing degree of cross-linking and decreases with increasing length of the cross-linker chains. We find that the brush-forming polymer chains in the outer layer play a significant role in reducing friction at the interface.

Modulation of Surface-Initiated ATRP by Confinement: Mechanism and Applications.

The mechanism of surface-initiated atom transfer polymerization (SI-ATRP) of methacrylates in confined volumes is systematically investigated by finely tuning the distance between a grafting surface and an inert plane by means of nanosized patterns and micrometer thick foils. The polymers were synthesized from monolayers of photocleavable initiators, which allow the analysis of detached brushes by size-exclusion chromatography (SEC). Compared to brushes synthesized under "open" polymerization mixtures, nearly a 4-fold increase in brush molar mass was recorded when SI-ATRP was performed within highly confined reaction volumes. Correlating the SI-ATRP of methyl methacrylate (MMA), with and without "sacrificial" initiator, to that of lauryl methacrylate (LMA) and analyzing the brush growth rates within differently confined volumes, we demonstrate faster grafting kinetics with increasing confinement due to the progressive hindering of CuII-based deactivators from the brush propagating front. This effect is especially noticeable when viscous polymerization mixtures are generated and enables the synthesis of several hundred nanometer thick brushes within relatively short polymerization times. The faster rates of confined SI-ATRP can be additionally used to fabricate, in one pot, precisely structured brush gradients, when volume confinement is continuously varied across a single substrate by spatially tuning the vertical distance between the grafting and the confining surfaces.

Ultrathin, freestanding, stimuli-responsive, porous membranes from polymer hydrogel-brushes.

The fabrication of freestanding, sub-100 nm-thick, pH-responsive hydrogel membranes with controlled nano-morphology, based on modified poly(hydroxyethyl methacrylate) (PHEMA) is presented. Polymer hydrogel-brush films were first synthesized by surface-initiated atom transfer radical polymerization (SI-ATRP) and subsequently detached from silicon substrates by UV-induced photo-cleavage of a specially designed linker within the initiator groups. The detachment was also assisted by pH-induced osmotic forces generated within the films in the swollen state. The mechanical properties and morphology of the freestanding films were studied by atomic force microscopy (AFM). Inclusion of nanopores of controlled diameter was accomplished by performing SI-ATRP from initiator-coated surfaces that had previously been patterned with polystyrene nanoparticles. Assembly parameters and particle sizes could be varied, in order to fabricate nanoporous hydrogel-brush membranes with tunable pore coverage and characteristics. Additionally, due to the presence of weak polyacid functions within the hydrogel, the membranes exhibited pH-dependent thickness in water and reversible opening/closing of the pores.