Switchable Product Selectivity in the Electrochemical Reduction of Carbon Dioxide Using Boron-Doped Diamond Electrodes.

The main product obtained by electrochemical reduction of CO2 depends on the electrode material, and in many cases the Faradaic efficiency for this is determined by the electrolyte. Only a few investigations in which attempts to produce different products from the same electrode material have been done so far. In this work, we focus on boron-doped diamond (BDD) electrodes with which plentiful amounts of formic acid and small amounts of carbon monoxide have been produced. By optimizing certain parameters and conditions used in the electrochemical process with BDD electrodes, such as the electrolyte, the boron concentration of the BDD electrode, and the applied potential, we were able to control the selectivity and efficiency with which carbon monoxide is produced. On one hand, with a BDD electrode with 1% boron used for the cathode and KClO4 for the catholyte, the selectivity for producing carbon monoxide was high. On the other hand, with a BDD electrode with 0.1% boron used for the cathode and KCl for the catholyte, the production of formic acid was the most evident. In situ attenuated total reflectance-infrared (ATR-IR) measurements during electrolysis showed that CO2•- intermediates were adsorbed on the BDD surface in the KClO4 aqueous solution. Here, switchable product selectivity was achieved when reducing CO2 using BDD electrodes.

In Situ Spectroscopic Study on the Surface Hydroxylation of Diamond Electrodes.

Carbon-based materials are regarded as an environmentally benign alternative to the conventional metal electrode used in electrochemistry from the viewpoint of sustainable chemistry. Among various carbon electrode materials, boron-doped diamond (BDD) exhibits superior electrochemical properties. However, it is still uncertain how surface chemical species of BDD influence the electrochemical performance, because of the difficulty in characterizing the surface species. Here, we have developed in situ spectroscopic measurement systems on BDD electrodes, i.e., in situ attenuated total reflection infrared spectroscopy (ATR-IR) and electrochemical X-ray photoelectron spectroscopy (EC-XPS). ATR-IR studies at a controlled electrode potential confirmed selective surface hydroxylation. EC-XPS studies confirmed deprotonation of C-OH groups at the BDD/electrolyte interface. These findings should be important not only for better understanding of BDD's fundamentals but also for a variety of applications.

Surface Hydrogenation of Boron-Doped Diamond Electrodes by Cathodic Reduction.

Boron-doped diamond (BDD) has attracted much attention as a promising electrode material especially for electrochemical sensing systems, because it has excellent properties such as a wide potential window and low background current. It is known that the electrochemical properties of BDD electrodes are very sensitive to the surface termination such as to whether it is hydrogen- or oxygen-terminated. Pretreating BDD electrodes by cathodic reduction (CR) to hydrogenate the surface has been widely used to achieve high sensitivity. However, little is known about the effects of the CR treatment conditions on surface hydrogenation. In this Article, we report on a systematic study of CR treatments that can achieve effective surface hydrogenation. As a result, we found that the surface hydrogenation could be improved by applying a more negative potential in a lower pH solution. This is because hydrogen atoms generated from protons in the CR treatment contribute to the surface hydrogenation. After CR treatments, BDD surface could be hydrogenated not completely but sufficiently to achieve high sensitivity for electrochemical sensing. In addition, we confirmed that hydrogenation with high repeatability could be achieved.

Evaluation of expert skills in refinery patrol inspection: visual attention and head positioning behavior.

We aimed to clarify expert skills in refinery patrol inspection using data collected through a virtual reality experimental system. As body positioning and postural changes are relevant factors during refinery patrol inspection tasks, we measured and analyzed both visual attention and head positioning behavior among experts and "knowledgeable novices" who were engaged in the engineering of the refinery but had less inspection experience. The participants performed a simulated inspection task, and the results showed that 1) expert inspectors could find more defects compared to knowledgeable novices, 2) visual attention behavior was similar between knowledgeable novices and experts, and 3) experts tended to position their heads at various heights and further from the inspection target to obtain visual information more effectively from the target compared to knowledgeable novices. This study presented the differences in head positioning behavior between expert and novice inspectors for the first time. These results suggest that to evaluate the skills used in inspecting relatively larger targets, both visual attention and head positioning behavior of the inspectors must be measured.

Systematic functional analysis of calcium-signalling proteins in the genome of the rice-blast fungus, Magnaporthe oryzae, using a high-throughput RNA-silencing system.

We developed an RNA-silencing vector, pSilent-Dual1 (pSD1), with a convergent dual promoter system that provides a high-throughput platform for functional genomics research in filamentous fungi. In the pSD1 system, the target gene was designed to be transcribed as a chimeric RNA with enhanced green fluorescent protein (eGFP) RNA. This enabled us to efficiently screen the resulting transformants using GFP fluorescence as an indicator of gene silencing. A model study with the eGFP gene showed that pSD1-based vectors induced gene silencing via the RNAi pathway with slightly lower efficiency than did hairpin eGFP RNA-expressing vectors. To demonstrate the applicability of the pSD1 system for elucidating gene function in the rice-blast fungus Magnaporthe oryzae, 37 calcium signalling-related genes that include almost all known calcium-signalling proteins in the genome were targeted for gene silencing by the vector. Phenotypic analyses of the silenced transformants showed that at least 26, 35 and 15 of the 37 genes examined were involved in hyphal growth, sporulation and pathogenicity, respectively, in M. oryzae. These included several novel findings such as that Pmc1-, Spf1- and Neo1-like Ca(2+) pumps, calreticulin and calpactin heavy chain were essential for fungal pathogenicity.

Expression of survivin and of antigen detected by a novel monoclonal antibody, T332, is associated with outcome of diffuse large B-cell lymphoma and its subtypes.

Although diffuse large B-cell lymphoma (DLBCL) is the most common type of non-Hodgkin lymphoma, it is both clinically and morphologically heterogenous. The present study investigates the significance of survivin and a novel monoclonal antibody (MAb), T332, immunohistochemically for predicting the prognoses of DLBCL and its subtypes classified as germinal center B-cell-like type (GCB) and non-GCB type (NGCB) based on the expression profiles of CD10, bcl-6, and MUM1. A total of 60 cases of DLBCL (GCB, n = 22; NGCB, n = 38) were examined for the expression of survivin and T332 antigen. Survivin(+) DLBCL had a significantly worse prognosis (P = 0.01) than survivin(-) cases, as already reported, while survivin(+) GCB or NGCB tended to have poor prognoses (P = 0.06 and 0.07, respectively). However, T332(+) DLBCL and NGCB had significantly more unfavorable prognoses than T332(-) cases (P = 0.01 and 0.02, respectively) while there was no significant survival difference between the T332(+) and T332(-) groups of GCB (P = 0.11). Interestingly DLBCL coexpressing survivin and T332 (n = 13) had a significantly worse prognosis (P = 0.009) than the remaining single positive and double negative cases (n = 31). In conclusion, survivin and the novel MAb, T332, might be a good predictor of DLBCL and its subtypes.