Coronally advanced flap versus tunnel technique for the treatment of peri-implant soft tissue dehiscences with the connective tissue graft: A randomized, controlled clinical trial.

AIM: To evaluate the efficacy of coronally advanced flap (CAF) versus tunnel technique (TUN) in covering isolated mid-facial peri-implant soft tissue dehiscences (PSTDs). MATERIALS AND METHODS: Twenty-eight participants presenting with isolated non-molar implants exhibiting PSTDs were enrolled and randomized to receive either CAF or TUN, both with a connective tissue graft (CTG). The primary outcome of the study was the percentage of mean PSTD coverage at 12 months. Secondary endpoints included the frequency of complete PSTD coverage, changes in keratinized mucosa width (KMW) and horizontal mucosal thickness (MT), as assessed with transgingival probing, 3D optical scanning and ultrasonography, professional aesthetic evaluation and patient-reported outcome measures (PROMs). RESULTS: At 12 months, the mean PSTD coverage of the CAF and TUN groups was 90.23% and 59.76%, respectively (p = .03). CAF-treated sites showed a substantially higher frequency of complete PSTD coverage (p = .07), together with significantly greater gain of KMW (p = .01), increase in MT (p = .02), volumetric gain (p < .01) and professional aesthetic outcomes (p = .01). Both interventions showed an improvement in patient-reported aesthetics and a reduction of the anxiety related to the appearance of the implant compared to baseline, with the CAF group obtaining significantly higher scores (p = .03 for both PROMs). CONCLUSIONS: CAF + CTG resulted in superior PSTD coverage outcomes, greater gain in KMW and MT, and better PROMs than TUN + CTG for the treatment of isolated PSTDs (ClinicalTrials.gov NCT03498911).

The Influence of Local Pamidronate Application on Alveolar Dimensional Preservation after Tooth Extraction-An Animal Experimental Study.

The aim of this randomized, controlled animal exploratory trial was to investigate the influence of local application of aminobisphosphonate pamidronate during the socket preservation procedure. Mandibular premolars were extracted in five Göttingen minipigs. Two animals underwent socket preservation using BEGO OSS (n = 8 sockets) and three animals using BEGO OSS + Pamifos (15 mg) (n = 12 sockets). After jaw impression, cast models (baseline, eight weeks postoperative) were digitized using an inLab X5 scanner (Dentsply Sirona) and the generated STL data were superimposed and analyzed with GOM Inspect 2018 (GOM, Braunschweig). After 16 weeks, the lower jaws were prepared and examined using standard histological methods. In the test group (BEGO OSS + pamidronate), buccooral dimensional loss was significantly lower, both vestibulary (0.80 ± 0.57 mm vs. 1.92 ± 0.63 mm; p = 0.00298) and lingually (1.36 ± 0.58 mm vs. 2.56 ± 0.65 mm; p = 0.00104) compared with the control group (BEGO OSS). The test group showed a significant difference between vestibular and lingual dimensional loss (p = 0.04036). Histology showed cortical and cancellous bone in the alveolar sockets without signs of local inflammation. Adjuvant application of pamidronate during socket preservation reduces alveolar dimensional loss significantly. Further investigations with regard to dose-response relationships, volume effects, side effects, and a verification of the suitability in combination with other bone substitute materials (BSMs) are necessary.

Alveolar ridge alterations after lateral guided bone regeneration with and without hyaluronic acid: a prospective randomized trial with morphometric and histomorphometric evaluation.

OBJECTIVE: To clinically and histologically evaluate the potential effect of a cross-linked, high molecular weight hyaluronic acid (xHyA) on the outcomes of guided bone regeneration performed with a demineralized bovine bone mineral (DBBM) covered with a natural collagen membrane. METHOD AND MATERIALS: Eleven patients (eight females and three males, mean age 53 years) with a total of 27 surgical sites were treated. Treatments were performed with either DBBM and natural collagen membrane fixed with tacks (group A) or DBBM mixed with xHyA and subsequently covered with natural collagen membrane (group B). Clinical evaluations were made at baseline (T1), immediately after guided bone regeneration (T2), and at the time of implant placement (T3). Additionally, at the time of implant placement, core biopsies were retrieved and submitted for histologic analysis. RESULTS: Healing was uneventful in all cases. At 6 months, group B revealed a statistically significantly higher crestal ridge dimension compared to group A (P = .007). The histologic analysis revealed a tendency for greater mineralized tissue formation in group B compared to group A (67.5% versus 41.6%) and contained a higher amount of new bone (37.2%) and less DBBM residues (20.9%) than group A (12.8% new bone and 28.8% DBBM residues, respectively). CONCLUSIONS: Within their limits, the present data indicate that, during guided bone regeneration with natural collagen membrane, the combination of DBBM and xHyA may improve the quality and quantity of bone formed with DBBM alone.

Gingival phenotype distribution in young Caucasian women and men - An investigative study.

OBJECTIVES: To evaluate the relationship between gingival phenotype and tooth location based on selected index teeth ("Ramfjord") and assess possible differences between women and men. MATERIAL AND METHODS: Thirty-six women and 20 men voluntarily participated in this investigation with an average age of 23 years (min: 19; max: 37). Gingival phenotypes (GP) were assessed by transparency of a periodontal probe through the buccal gingival margin. RESULTS: A comparable and similar GP on all index teeth was only found in seven out of the 56 subjects, that is, thin or thick only: Five participants (three male/two female) showed a uniform and constantly thick and two females a constantly thin GP. While the majority of molars (94.6%; p = 0.006) showed a thick GP, premolars (61.6%; p = 0.09) as well as incisors (70.5%; p = 0.046) were predominantly categorized as thin. In addition, significantly thicker GP was in general observed for maxillary teeth (p = 0.001) but without differences between genders (p = 0.722). CONCLUSION: No constant GP can be expected within one dentition. The use of the "Ramfjord teeth" may serve as a quick overview and reliable method to screen GP distribution.

Three-Dimensional Volumetric Analysis of the Palatal Donor Site Following Soft Tissue Harvesting.

Autogenous soft tissue grafting is a commonly performed procedure in periodontal and implant surgery. Reharvesting a connective tissue graft (CTG) from the same palatal donor site is often required, but little is known about the volumetric changes that occur after harvesting a free gingival graft and how long the palatal mucosa takes to regain its original form and thickness. This study evaluated the volumetric changes that occur at the palatal donor site after harvesting a soft tissue graft with a noninvasive digital technology. Nineteen patients needing a CTG for a single site were enrolled. Intraoral digital scans of the palatal donor sites were obtained at baseline and at 1, 3, 6, and 12 months. The digital scans were imported and analyzed with an imaging software to evaluate volumetric changes. Average volume losses of 5.82 ± 2.63 mm3 and 11.03 ± 5.47 mm3 were observed after 1 and 3 months, respectively. Only minor changes were observed at 6 and 12 months. Linear dimensional changes at 5 and 7 mm from the gingival margin were substantially higher than the changes at 3 mm for the 1- and 3-month interval comparisons compared to baseline. Graft dimension was associated with volume loss at 1 and 3 months (P < .01). After palatal harvesting, the donor site undergoes volumetric changes, mostly during the first 3 months, and is attenuated thereafter.

Three-dimensional printing of clinical scale and personalized calcium phosphate scaffolds for alveolar bone reconstruction.

OBJECTIVE: Alveolar bone defects can be highly variable in their morphology and, as the defect size increases, they become more challenging to treat with currently available therapeutics and biomaterials. This investigation sought to devise a protocol for fabricating customized clinical scale and patient-specific, bioceramic scaffolds for reconstruction of large alveolar bone defects. METHODS: Two types of calcium phosphate (CaP)-based bioceramic scaffolds (alginate/ß-TCP and hydroxyapatite/α-TCP, hereafter referred to as hybrid CaP and Osteoink™, respectively) were designed, 3D printed, and their biocompatibility with alveolar bone marrow stem cells and mechanical properties were determined. Following scaffold optimization, a workflow was developed to use cone beam computed tomographic (CBCT) imaging to design and 3D print, defect-specific bioceramic scaffolds for clinical-scale bone defects. RESULTS: Osteoink™ scaffolds had the highest compressive strength when compared to hybrid CaP with different infill orientation. In cell culture medium, hybrid CaP degradation resulted in decreased pH (6.3) and toxicity to stem cells; however, OsteoInk™ scaffolds maintained a stable pH (7.2) in culture and passed the ISO standard for cytotoxicity. Finally, a clinically feasible laboratory workflow was developed and evaluated using CBCT imaging to engineer customized and defect-specific CaP scaffolds using OsteoInk™. It was determined that printed scaffolds had a high degree of accuracy to fit the respective clinical defects for which they were designed (0.27 mm morphological deviation of printed scaffolds from digital design). SIGNIFICANCE: From patient to patient, large alveolar bone defects are difficult to treat due to high variability in their complex morphologies and architecture. Our findings shows that Osteoink™ is a biocompatible material for 3D printing of clinically acceptable, patient-specific scaffolds with precision-fit for use in alveolar bone reconstructive procedures. Collectively, emerging digital technologies including CBCT imaging, 3D surgical planning, and (bio)printing can be integrated to address this unmet clinical challenge.

Changes in salivary biomarkers associated with periodontitis and diabetic neuropathy in individuals with type 1 diabetes.

The objective of this pilot clinical study was to identify salivary biomarkers that are associated with periodontal disease and measures of diabetic autonomic dysfunction. Saliva samples from 32 participants were obtained from 3 groups: healthy (H), type 1 diabetes mellitus (DM), and type 1 diabetes mellitus with neuropathy (DMN). Based on the periodontal examination, individuals' mean Periodontal Screening and Recording scores were categorized into two groups (periodontally healthy and gingivitis), and correlated to specific salivary inflammatory biomarkers assessed by a customized protein array and enzyme assay. The mean salivary IgA level in DM was 9211.5 ± 4776.4 pg/ml, which was significantly lower than H (17,182.2 ± 8899.3 pg/ml). IgA in DMN with healthy periodontium was significantly lower (5905.5 ± 3124.8 pg/ml) compared to H, although IgA levels in DMN patients with gingivitis (16,894. 6 ± 7084.3) were not. According to the result of a logistic regression model, IgA and periodontal condition were the indicators of the binary response given by H versus DM, and H versus DMN, respectively. These data suggest that selected salivary biomarkers, such as IgA, combined with a periodontal examination prior to obtaining salivary samples can offer a non-invasive method to assess risk for developing diabetic neuropathy.

BMP Gene-Immobilization to Dental Implants Enhances Bone Regeneration.

For individuals who have experienced tooth loss, dental implants are an important treatment option for oral reconstruction. For these patients, alveolar bone augmentation and acceleration of osseointegration optimize implant stability. Traditional oral surgery often requires invasive procedures, which can result in prolonged treatment time and associated morbidity. It has been previously shown that chemical vapor deposition (CVD) polymerization of functionalized [2.2]paracyclophanes can be used to anchor gene encoding vectors onto biomaterial surfaces and local delivery of a bone morphogenetic protein (BMP)-encoding vector can increase alveolar bone volume and density in vivo. This study is the first to combine the use of CVD technology and BMP gene delivery on titanium for the promotion of bone regeneration and bone to implant contact in vivo. BMP-7 tethered to titanium surface enhances osteoblast cell differentiation and alkaline phosphatase activity in vitro and increases alveolar bone regeneration and % bone to implant contact similar to using high doses of exogenously applied BMP-7 in vivo. The use of this innovative gene delivery strategy on implant surfaces offers an alternative treatment option for targeted alveolar bone reconstruction.

Horizontal Augmentation of Chronic Mandibular Defects by the Guided Bone Regeneration Approach: A Randomized Study in Dogs.

Various biomaterial combinations have been studied focusing on their ability to stabilize blood clots and maintain space under soft tissue to support new bone formation. A popular combination is Deproteinized Bovine Bone Mineral (DBBM) placed with a native collagen membrane (NCM) tacked to native bone. In this study, we compared the outcome of this treatment option to those achieved with three different graft/membrane combinations with respect to total newly occupied area and the mineralized compound inside. After bi-lateral extraction of two mandibular premolars in five adult beagles L-shaped alveolar defects were created. A total of 20 defects healed for 6 weeks resulting in chronic type bone defects. At baseline, four options were randomly allocated to five defects each: a. DBBM + NCM with a four-pin fixation across the ridge; b. DBBM + RCLC (ribose cross-linked collagen membrane); c. DBBM + NPPM (native porcine pericardium membrane); and d. Ca-sulfate (CS) + RCLC membrane. Membranes in b/c/d were not fixed; complete tensionless wound closure was achieved by CAF. Termination after 3 months and sampling followed, and non-decalcified processing and toluidine blue staining were applied. Microscopic images obtained at standardized magnification were histomorphometrically assessed by ImageJ software (NIH). An ANOVA post hoc test was applied; histomorphometric data are presented in this paper as medians and interquartile ranges (IRs). All sites healed uneventfully, all sites were sampled and block separation followed before Technovit embedding. Two central sections per block for each group were included. Two of five specimen were lost due to processing error and were excluded from group b. New bone area was significantly greater for option b. compared to a. (p = 0.001), c. (p = 0.002), and d. (p = 0.046). Residual non-bone graft area was significantly less for option d. compared to a. (p = 0.026) or c. (p = 0.021). We conclude that collagen membranes with a prolonged resorption/barrier profile combined with bone substitutes featuring different degradation profiles sufficiently support new bone formation. Tacking strategy/membrane fixation appears redundant when using these biomaterials.

Ridge preservation of compromised extraction sockets applying a soft cortical membrane: A canine proof-of-principle evaluation.

OBJECTIVES: To explore whether placement of a soft cortical membrane can restore and regenerate the original alveolar ridge contour in deficient sockets. MATERIALS AND METHODS: One Beagle dog was used in this proof-of-principle evaluation. In a first intervention, a standardized buccal dehiscence defect was artificially created at the distal roots of the 3rd and 4th mandibular premolars. Four weeks later, following endodontic treatment of the mesial roots, teeth were hemisected and the distal roots were extracted without raising a flap. A cortical membrane (Lamina®, Osteobiol) was placed outside of the bony envelope of the extraction socket to rebuild the buccal bone contour. Afterwards, sockets were filled with a collagen-modified porcine bone graft material (Gen-Os®, Osteobiol) to the level of the surrounding bone height. The socket orifice was closed with a porcine dermal matrix (Derma®). After four months, block specimens containing the socket-sites and remaining roots were retrieved, histologically processed and analyzed. RESULTS: Surgery and post-operative healing were uneventful. Histologically, bone formation under the membrane was found, i.e. bony protrusions and ossicles by osteoblasts could be identified. Concomitantly, the membrane showed clear signs of degradation. Bone substitute was well integrated in newly formed bone and resorption of particles was found. CONCLUSION: Three major observations were made in the present proof-of-principle study: (i) regeneration of a compromised socket seems possible when applying the presented approach, (ii) the soft cortical membrane was sufficiently stable to allow for the establishment of the contour and to inhibit soft tissue invasion and (iii) the applied xenogenic graft material was undergoing remodelling processes while allowing adequate bone regeneration.

Sclerostin antibody stimulates periodontal regeneration in large alveolar bone defects.

Destruction of the alveolar bone in the jaws can occur due to periodontitis, trauma or following tumor resection. Common reconstructive therapy can include the use of bone grafts with limited predictability and efficacy. Romosozumab, approved by the FDA in 2019, is a humanized sclerostin-neutralizing antibody (Scl-Ab) indicated in postmenopausal women with osteoporosis at high risk for fracture. Preclinical models show that Scl-Ab administration preserves bone volume during periodontal disease, repairs bone defects surrounding dental implants, and reverses alveolar bone loss following extraction socket remodeling. To date, there are no studies evaluating Scl-Ab to repair osseous defects around teeth or to identify the efficacy of locally-delivered Scl-Ab for targeted drug delivery. In this investigation, the use of systemically-delivered versus low dose locally-delivered Scl-Ab via poly(lactic-co-glycolic) acid (PLGA) microspheres (MSs) was compared at experimentally-created alveolar bone defects in rats. Systemic Scl-Ab administration improved bone regeneration and tended to increase cementogenesis measured by histology and microcomputed tomography, while Scl-Ab delivered by MSs did not result in enhancements in bone or cemental repair compared to MSs alone or control. In conclusion, systemic administration of Scl-Ab promotes bone and cemental regeneration while local, low dose delivery did not heal periodontal osseous defects in this study.

Scar Tissue Formation Following Alveolar Ridge Preservation: A Case Control Study.

The aim of this retrospective case control study was to compare a porcine collagen matrix (Mucograft Seal, Geistlich) with a free gingival punch graft with respect to size, invagination, and color of resulting soft tissue scar formation. Following definition of inclusion and exclusion criteria, 22 patients were retrospectively included in this study. The patients were divided into two groups. In group A, the extraction socket was filled with bovine bone mineral (Bio-Oss, Geistlich) and covered with a free gingival punch graft. In group B, the extraction socket was filled with bovine bone mineral (Bio-Oss) and covered with porcine collagen matrix. After final prosthetic reconstruction (18 implant-retained crowns and 4 fixed partial dentures), two independent examiners evaluated the size, invagination, and color of the soft tissue scar using a modified scar-evaluation scale originally developed for dermal wounds (lower values correspond to less scarring). Patient satisfaction was recorded using a questionnaire. Patient records were screened for frequency and costs of scar removal treatment. The average scar score for groups A and B was 1.33 and 4.3, respectively, revealing significantly less scarring in group B (P = .000295). Frequency and costs of scar removal treatment were statistically significantly higher in Group A (P = .000234). Patient satisfaction was not statistically significantly different between the treatment groups (P = .711 for group A and P = .809 for group B. The results suggest that alveolar ridge preservation using bovine bone mineral and porcine collagen matrix leads to less scar tissue formation when compared with bovine bone mineral and free gingival punch grafts from the palate.