Multi-bounce self-mixing in terahertz metasurface external-cavity lasers.

The effects of optical feedback on a terahertz (THz) quantum-cascade metasurface vertical-external-cavity surface-emitting laser (QC-VECSEL) are investigated via self-mixing. A single-mode 2.80 THz QC-VECSEL operating in continuous-wave is subjected to various optical feedback conditions (i.e., feedback strength, round-trip time, and angular misalignment) while variations in its terminal voltage associated with self-mixing are monitored. Due to its large radiating aperture and near-Gaussian beam shape, we find that the QC-VECSEL is strongly susceptible to optical feedback, which is robust against misalignment of external optics. This, in addition to the use of a high-reflectance flat output coupler, results in high feedback levels associated with multiple round-trips within the external cavity-a phenomenon not typically observed for ridge-waveguide QC-lasers. Thus, a new theoretical model is established to describe self-mixing in the QC-VECSEL. The stability of the device under variable optical feedback conditions is also studied. Any mechanical instabilities of the external cavity (such as vibrations of the output coupler), are enhanced due to feedback and result in low-frequency oscillations of the terminal voltage. The work reveals how the self-mixing response differs for the QC-VECSEL architecture, informs other systems in which optical feedback is unavoidable, and paves the way for QC-VECSEL self-mixing applications.

Optical injection locking of a THz quantum-cascade VECSEL with an electronic source.

Optical injection locking of a metasurface quantum-cascade (QC) vertical-external-cavity surface-emitting laser (VECSEL) is demonstrated at 2.5 THz using a Schottky diode frequency multiplier chain as the injection source. The spectral properties of the source are transferred to the laser output with a locked linewidth of ∼1 Hz, as measured by a separate subharmonic diode mixer, and a locking bandwidth of ∼300 MHz is achieved. The large locking range is enabled by the microwatt power levels available from modern diode multipliers. The interplay between the injected signal and feedback from external reflections is studied and demonstrated to increase or decrease the locking bandwidth relative to the classic locking range depending on the phase of the feedback.

Continuous-wave GaAs/AlGaAs quantum cascade laser at 5.7 THz.

Design strategies for improving terahertz (THz) quantum cascade lasers (QCLs) in the 5-6 THz range are investigated numerically and experimentally, with the goal of overcoming the degradation in performance that occurs as the laser frequency approaches the Reststrahlen band. Two designs aimed at 5.4 THz were selected: one optimized for lower power dissipation and one optimized for better temperature performance. The active regions exhibited broadband gain, with the strongest modes lasing in the 5.3-5.6 THz range, but with other various modes observed ranging from 4.76 to 6.03 THz. Pulsed and continuous-wave (cw) operation is observed up to temperatures of 117 K and 68 K, respectively. In cw mode, the ridge laser has modes up to 5.71 THz - the highest reported frequency for a THz QCL in cw mode. The waveguide loss associated with the doped contact layers and metallization is identified as a critical limitation to performance above 5 THz.