Shallow defects and variable photoluminescence decay times up to 280 µs in triple-cation perovskites.

Quantifying recombination in halide perovskites is a crucial prerequisite to control and improve the performance of perovskite-based solar cells. While both steady-state and transient photoluminescence are frequently used to assess recombination in perovskite absorbers, quantitative analyses within a consistent model are seldom reported. We use transient photoluminescence measurements with a large dynamic range of more than ten orders of magnitude on triple-cation perovskite films showing long-lived photoluminescence transients featuring continuously changing decay times that range from tens of nanoseconds to hundreds of microseconds. We quantitatively explain both the transient and steady-state photoluminescence with the presence of a high density of shallow defects and consequent high rates of charge carrier trapping, thereby showing that deep defects do not affect the recombination dynamics. The complex carrier kinetics caused by emission and recombination processes via shallow defects imply that the reporting of only single lifetime values, as is routinely done in the literature, is meaningless for such materials. We show that the features indicative for shallow defects seen in the bare films remain dominant in finished devices and are therefore also crucial to understanding the performance of perovskite solar cells.

Micro- and nanopatterning of functional organic monolayers on oxide-free silicon by laser-induced photothermal desorption.

The photothermal laser patterning of functional organic monolayers, prepared on oxide-free hydrogen-terminated silicon, and subsequent backfilling of the laser-written lines with a second organic monolayer that differs in its terminal functionality, is described. Since the thermal monolayer decomposition process is highly nonlinear in the applied laser power density, subwavelength patterning of the organic monolayers is feasible. After photothermal laser patterning of hexadecenyl monolayers, the lines freed up by the laser are backfilled with functional acid fluoride monolayers. Coupling of cysteamine to the acid fluoride groups and subsequent attachment of Au nanoparticles allows easy characterization of the functional lines by atomic force microscopy (AFM) and scanning electron microscopy (SEM). Depending on the laser power and writing speed, functional lines with widths between 1.1 µm and 250 nm can be created. In addition, trifluoroethyl-terminated (TFE) monolayers are also patterned. Subsequently, the decomposed lines are backfilled with a nonfunctional hexadecenyl monolayer, the TFE stripes are converted into thiol stripes, and then finally covered with Au nanoparticles. By reducing the lateral distance between the laser lines, Au-nanoparticle stripes with widths close to 100 nm are obtained. Finally, in view of the great potential of this type of monolayer in the field of biosensing, the ease of fabricating biofunctional patterns is demonstrated by covalent binding of fluorescently labeled oligo-DNA to acid-fluoride-backfilled laser lines, which--as shown by fluorescence microscopy--is accessible for hybridization.

Photothermal micro- and nanopatterning of organic/silicon interfaces.

Photothermal laser processing of organic monolayers on oxide-free silicon substrates under ambient conditions is investigated. Organic monolayers on Si(100) and Si(111) substrates are prepared via hydrosilylation of H-terminated silicon samples in neat 1-hexadecene and 1-hexadecyne, respectively. Laser processing at lambda = 514 nm and a 1/e(2) spot diameter of 2.6 microm results in local decomposition of the monolayers and oxidation of the exposed substrate. In agreement with the high thermal and chemical stability of these monolayers, a thermokinetic analysis of the data from experiments at distinct laser powers and pulse lengths points to a highly activated process. As a result, processing is strongly nonlinear and allows for subwavelength patterning, with line widths between 0.4 and 1.4 microm. Most remarkably, upon fabrication of dense line patterns, narrow organic monolayer stripes with sharp edges and lateral dimensions of 80 nm are formed. This opens up new perspectives in photothermal engineering of organic/silicon interfaces, e.g., for hybrid microelectronic and sensor applications.

Spin-coated planar Sb2S3 hybrid solar cells approaching 5% efficiency.

Antimony sulfide solar cells have demonstrated an efficiency exceeding 7% when assembled in an extremely thin absorber configuration deposited via chemical bath deposition. More recently, less complex, planar geometries were obtained from simple spin-coating approaches, but the device efficiency still lags behind. We compare two processing routes based on different precursors reported in the literature. By studying the film morphology, sub-bandgap absorption and solar cell performance, improved annealing procedures are found and the crystallization temperature is shown to be critical. In order to determine the optimized processing conditions, the role of the polymeric hole transport material is discussed. The efficiency of our best solar cells exceeds previous reports for each processing route, and our champion device displays one of the highest efficiencies reported for planar antimony sulfide solar cells.

Sonochemical synthesis of hydrogenated amorphous silicon nanoparticles from liquid trisilane at ambient temperature and pressure.

Silicon nanoparticles (Si-NPs) are increasing in relevance in diverse fields of scientific and nanotechnological inquiry, where currently some of the most important areas of research involve energy storage and biomedical applications. The present article is concerned with a curious and scalable method for the preparation of discrete, unoxidized, hydrogenated, and amorphous Si-NPs of tunable size in the range of 1.5-50nm. Using ultrasound generated with a conventional ultrasonic horn, the "fusion" of Si-NPs is demonstrated at ambient temperature and pressure by sonicating solutions containing readily available, semiconductor-grade purity trisilane (Si3H8). The only requirement for the synthesis is that it be carried out in an inert atmosphere such as that of a N2-filled glove box. Various spectroscopic techniques and electron microscopy images are used to show that the size of the Si-NPs can be controlled by varying the amplitude of the ultrasonic waves or the concentration of trisilane in the solution. Moreover, sustained ultrasonic irradiation is found to yield highly porous Si-NP agglomerates that may find use in applications requiring non-crystalline nanoscopic high specific surface area morphologies.