Counterpropagating Gradients of Antibacterial and Antifouling Polymer Brushes.

We report on the formation of counterpropagating density gradients in poly([2-dimethylaminoethyl] methacrylate) (PDMAEMA) brushes featuring spatially varying quaternized and betainized units. Starting with PDMAEMA brushes with constant grafting density and degree of polymerization, we first generate a density gradient of quaternized units by directional vapor reaction involving methyl iodide. The unreacted DMAEMA units are then betainized through gaseous-phase betainization with 1,3-propanesultone. The gas reaction of PDMAEMA with 1,3-propanesultone eliminates the formation of byproducts present during the liquid-phase modification. We use the counterpropagating density gradients of quaternized and betainized PDMAEMA brushes in antibacterial and antifouling studies. Completely quaternized and betainized brushes exhibit antibacterial and antifouling behaviors. Samples containing 12% of quaternized and 85% of betainized units act simultaneously as antibacterial and antifouling surfaces.

Dependence of deposition method on the molecular structure and stability of organosilanes revealed from degrafting by tetrabutylammonium fluoride.

We probe the structure of self-assembled monolayers (SAMs) comprising organosilanes deposited on flat silica-based surfaces prepared by liquid and vapor deposition by removing the organosilane molecules gradually from the underlying substrate via tetrabutylammonium fluoride (TBAF). Removal of organosilanes from the surface involves the cleavage of all pertinent Si-O bonds that anchor the organosilane molecules to the SAM, i.e., direct organosilane-surface linkages and in-plane crosslinks between neighboring organosilanes. We gain insight into the organosilane structure and stability by monitoring the organosilane density as a function of exposure time to TBAF. Degrafting of trifunctional chloro- and methoxy-alkylsilanes deposited from solution yields similar degrafting kinetics. We observe fast degrafting for organosilane SAMs deposited from the vapor phase, indicating that SAMs prepared in this manner form more loosely packed arrays, with less in-plane connectivity, compared to their solution-deposited counterparts. Bulkier, fluorinated silanes form more stable SAMs due to their ability to readily align and form a network with few aggregates and a relatively high fraction of surface bonds. The addition of a polymer brush to an anchored organosilane molecule demonstrates that increased bond tension accelerates the degrafting process despite the increased diffusion resistance.

Mechanochemical Degrafting of a Surface-Tethered Poly(acrylic acid) Brush Promoted Etching of Its Underlying Silicon Substrate.

The stability of surface-tethered polyelectrolyte brushes has been investigated during the past few years. We have previously reported on the degrafting of poly(acrylic acid) (PAA) polymer brushes from flat silicon substrates. Here, we present a detailed study on the effects of NaCl concentration and the grafting density and molecular weight on the stability of PAA brushes during incubation in 0.1 M ethanolamine buffer (pH 9.0) solutions. Without NaCl in the buffer solution, the PAA brushes remain intact. Adding NaCl facilitates etching of the substrate due to accelerating dissolution of the top silica layer and promoting degrafting of the PAA chains. The PAA grafting density and molecular weight play an important role in the substrate etching by affecting the penetration barrier and local concentration of the etchants. We also tested the stability of self-assembled monolayers (SAMs) made of hydrophobic alkyltrichlorosilanes anchored on silicon substrates. The results demonstrated that the SAMs were too thin to protect the substrates from etching, in contrast to thick poly(methyl methacrylate) brushes. Our findings suggest that both polymer brushes (especially polyelectrolyte brushes) and SAMs anchored to silicon substrates may undergo erosion/etching on the substrates in basic environments, which compromises their stability and therefore jeopardizes their applications in coating, biosensing, and so forth.

Design and Fabrication of Wettability Gradients with Tunable Profiles through Degrafting Organosilane Layers from Silica Surfaces by Tetrabutylammonium Fluoride.

Surface-bound wettability gradients allow for a high-throughput approach to evaluate surface interactions for many biological and chemical processes. Here we describe the fabrication of surface wettability gradients on flat surfaces by a simple, two-step procedure that permits precise tuning of the gradient profile. This process involves the deposition of homogeneous silane SAMs followed by the formation of a surface coverage gradient through the selective removal of silanes from the substrate. Removal of silanes from the surface is achieved by using tetrabutylammonium fluoride which selectively cleaves the Si-O bonds at the headgroup of the silane. The kinetics of degrafting has been modeled by using a series of first order rate equations, based on the number of attachment points broken to remove a silane from the surface. Degrafting of monofunctional silanes exhibits a single exponential decay in surface coverage; however, there is a delay in degrafting of trifunctional silanes due to the presence of multiple attachment points. The effects of degrafting temperature and time are examined in detail and demonstrate the ability to reliably and precisely control the gradient profile on the surface. We observe a relatively homogeneous coverage of silane (i.e., without the presence of islands or holes) throughout the degrafting process, providing a much more uniform surface when compared to additive approaches of gradient formation. Linear gradients were formed on the substrates to demonstrate the reproducibility and tuneability of this subtractive approach.

Highly Transparent and Stretchable Conductors Based on a Directional Arrangement of Silver Nanowires by a Microliter-Scale Solution Process.

We report an effective method for fabricating highly transparent and stretchable large-area conducting films based on a directional arrangement of silver nanowires (AgNWs) driven by a shear force in a microliter-scale solution process. The thin conducting films with parallel AgNWs or cross-junctions of AgNWs are deposited on the coating substrate by dragging a microliter drop of the coating solution trapped between two plates. The optical and electrical properties of the AgNW thin films are finely tuned by varying the simple systematic parameters in the coating process. The transparent thin films with AgNW cross-junctions exhibit the superior electrical conductivity with a sheet resistance of 10 Ω sq(-1) at a transmittance of 85% (λ = 550 nm), which is well described by the high ratio of DC to optical conductivity of 276 and percolation theory in a two-dimensional matrix model. This simple coating method enables the deposition of AgNW thin films with high optical transparency, flexibility, and stretchability directly on plastic substrates.

Novel Synthesis, Coating, and Networking of Curved Copper Nanowires for Flexible Transparent Conductive Electrodes.

In this work, a whole manufacturing process of the curved copper nanowires (CCNs) based flexible transparent conductive electrode (FTCE) is reported with all solution processes, including synthesis, coating, and networking. The CCNs with high purity and good quality are designed and synthesized by a binary polyol coreduction method. In this reaction, volume ratio and reaction time are the significant factors for the successful synthesis. These nanowires have an average 50 nm in width and 25-40 µm range in length with curved structure and high softness. Furthermore, a meniscus-dragging deposition (MDD) method is used to uniformly coat the well-dispersed CCNs on the glass or polyethylene terephthalate substrate with a simple process. The optoelectrical property of the CCNs thin films is precisely controlled by applying the MDD method. The FTCE is fabricated by networking of CCNs using solvent-dipped annealing method with vacuum-free, transfer-free, and low-temperature conditions. To remove the natural oxide layer, the CCNs thin films are reduced by glycerol or NaBH4 solution at low temperature. As a highly robust FTCE, the CCNs thin film exhibits excellent optoelectrical performance (T = 86.62%, R(s) = 99.14 Ω â—»(-1)), flexibility, and durability (R/R(0) < 1.05 at 2000 bending, 5 mm of bending radius).

Formation and characterization of wrinkle structures of chemically-derived graphene thin films and micropatterns.

In this study, we report a simple and effective process for the fabrication of wrinkle structures of chemically derived graphene thin films and patterns. Reduced graphene oxide (rGO) thin films/patterns formed on glass substrates are transferred to pre-strained elastomeric layers by improving adhesion strength at the rGO/PDMS interface with the assistance of oxygen plasma treatment. The morphology of rGO wrinkle structures is investigated in the various applied strains and film thicknesses. The experimental results were interpreted by theoretical models and well fitted to the estimated values. The techniques for such well-defined rGO wrinkle structures could be used for flexible and stretchable graphene-based electronic devices.

The steep road to nonviral nanomedicines: Frequent challenges and culprits in designing nanoparticles for gene therapy.

The potential of therapeutically loaded nanoparticles (NPs) has been successfully demonstrated during the last decade, with NP-mediated nonviral gene delivery gathering significant attention as highlighted by the broad clinical acceptance of mRNA-based COVID-19 vaccines. A significant barrier to progress in this emerging area is the wild variability of approaches reported in published literature regarding nanoparticle characterizations. Here, we provide a brief overview of the current status and outline important concerns regarding the need for standardized protocols to evaluate NP uptake, NP transfection efficacy, drug dose determination, and variability of nonviral gene delivery systems. Based on these concerns, we propose wide adherence to multimodal, multiparameter, and multistudy analysis of NP systems. Adoption of these proposed approaches will ensure improved transparency, provide a better basis for interlaboratory comparisons, and will simplify judging the significance of new findings in a broader context, all critical requirements for advancing the field of nonviral gene delivery.

Protein Nanoparticles: Uniting the Power of Proteins with Engineering Design Approaches.

Protein nanoparticles, PNPs, have played a long-standing role in food and industrial applications. More recently, their potential in nanomedicine has been more widely pursued. This review summarizes recent trends related to the preparation, application, and chemical construction of nanoparticles that use proteins as major building blocks. A particular focus has been given to emerging trends related to applications in nanomedicine, an area of research where PNPs are poised for major breakthroughs as drug delivery carriers, particle-based therapeutics or for non-viral gene therapy.

Charge Density Gradients of Polymer Thin Film by Gaseous Phase Quaternization.

We report on the rapid formation of charge density gradients in polymer films by exposing poly([2-dimethylaminoethyl] methacrylate) (PDMAEMA) films resting on flat silica substrates to methyl iodide (i.e., MI, also known as iodomethane) vapors. We adjust the charge gradient by varying the MI concentration in solution and the process time. The thickness of the parent PDMAEMA film does not affect the diffusion of MI through and the reaction kinetics in the films. Instead, the diffusion of MI through the gaseous phase constitutes the limiting step in the overall process.