RESUMEN
This study investigates human health risks associated with heavy metals (HMs) occurrence in municipal solid waste (MSW) landfills. For testing of selected MSW landfills steps were involved, including site characterization, soil sampling and chemical testing, statistical analysis, as well as health risk assessment, carcinogenic and non-carcinogenic effects. For the Polish landfill (Radiowo) the average HMs concentrations were found in the following order: Zn (52.74 mg/kg DM) > Pb (28.32 mg/kg DM) > Cu (12.14 mg/kg DM) > Ni (4.50 mg/kg DM) > Cd (3.49 mg/kg DM), while for the Czech landfill (Zdounky): Zn (32.05 mg/kg DM) > Cu (14.73 mg/kg DM) > Ni (4.73 mg/kg DM) > Pb (0.10 mg/kg DM) = Cd (0.10 mg/kg DM). Strong positive correlations between selected HMs demonstrated identical origins. Principal component analysis (PCA) performed for the Radiowo landfill transferred the soil parameters into three principal components (PCs), accounting for 87.12% of the total variance. The results of the PCA analysis for the Zdounky landfill revealed three PCs responsible for 95.16% of the total variance. The exposure pathways of HMs for landfills were in the following order: ingestion > dermal absorption > inhalation. For both landfills, the values of hazard quotient were lower than 1, indicating no potential negative health effects. In terms of the hazard index (HI), for both landfills, no adverse human health effects occur (HI < 1). The incremental lifetime cancer risk (ILCR) values indicated negligible or acceptable carcinogenic risk of HMs (average ILCR in the range from 5.01E-10 to 5.19E-06).
Asunto(s)
Metales Pesados , Contaminantes del Suelo , Humanos , Residuos Sólidos/análisis , Monitoreo del Ambiente , Cadmio/análisis , Plomo/análisis , Contaminantes del Suelo/toxicidad , Contaminantes del Suelo/análisis , Medición de Riesgo , Carcinógenos/análisis , Metales Pesados/toxicidad , Metales Pesados/análisis , Instalaciones de Eliminación de Residuos , Suelo/química , ChinaRESUMEN
Surface monitoring of landfills is crucial not only during their operation but also for later land restoration and development. Measurements concern environmental factors, such as leachate, migration of pollutants to water, biogas, and atmospheric emissions, and geotechnical factors, such as stability and subsidence. Landfill subsidence can be measured using modern surveying techniques. Modern measurement methods for landfill body displacement monitoring and their control after restoration and adaptation as recreational areas include terrestrial laser scanning (TLS), and scanning and low-altitude photogrammetric measurements from an unmanned aerial vehicle (UAV). The acquired measurement data in the form of 3D point clouds should be referenced to the local control network to enable a comprehensive analysis of data acquired using various techniques, including geotechnical sensors such as benchmarks, piezometers, and inclinometers. This study discusses the need for surface monitoring of municipal solid waste (MSW) landfills. A properly 3-D mapped landfill mass is the basis for ensuring the geotechnical safety of the restored landfill. Based on archival data and current measurements of the Radiowo landfill (Poland), this study compares the advantages and limitations of the following measurement techniques: linear and angular measurements, satellite measurements, TLS, and UAV scanning and photogrammetry, considering specific conditions of the location and vegetation of the landfill. Solutions for long-term monitoring were proposed, considering the cost and time resolution necessary for creating a differential model of landfill geometry changes.
RESUMEN
The formation of leachate is mainly due to the percolating of rainwater through the body of the landfill and the physical, chemical, and biological processes taking place inside the body of the landfill. The characteristics and pollution potential of leachate from the municipal solid waste (MSW) landfills in Poland (Lubna) and the Czech Republic (Zdounky) is presented. The objectives of this study are: 1) to evaluate and compare physicochemical characteristics of leachate, 2) to demonstrate the variability of leachate parameters in time, concerning stabilization phase of the landfill, 3) to present existing relationships between the characteristics of the leachate, 4) to indicate the factors determining the variability of the leachate composition. The Leachate Pollution Index (LPI) was applied to indicate temporal changes in leachate pollution, to assess polluting ability of leachate, and to compare the pollution potential of leachate. For the Lubna landfill, the minimum, maximum, and average values of LPI were: 6.10, 39.41, and 18.44, respectively. The LPI for the Lubna landfill tends to decrease in time due to stabilization of wastes. For the Zdounky landfill, temporal decreasing of LPI was not observed. The minimum, maximum, and average values of LPI were: 6.25, 14.25, and 10.11, respectively. Alkaline characteristics of leachate from both landfills indicate the mature stage of waste storage. This phenomenon was also evidenced by the Chemical Oxygen Demand (COD), ammonium (NH4+), and cadmium (Cd). For both landfills, pH was negatively correlated with most of the leachate parameters. It is the task for environmental engineers to confront existing knowledge (supplemented by the results of this work) about the properties of leachate, its changes over time and its polluting potential with the possibilities of treating and managing it properly.
Asunto(s)
Eliminación de Residuos , Contaminantes Químicos del Agua , Residuos Sólidos/análisis , República Checa , Polonia , Contaminantes Químicos del Agua/química , Instalaciones de Eliminación de Residuos , Eliminación de Residuos/métodosRESUMEN
Leachate is a contaminated liquid generated during the bio-chemical decomposition processes of municipal solid waste (MSW) that occurred at semi-solid or solid-state in a bioreactor landfill (BLF). Conceptually, leachate from a BLF is analogous to the urine generated in the 'human body', on which the medical practitioners rely to diagnose and remediate ailments. In line with this practice, to monitor the complex MSW decomposition processes, prolonged investigations were performed to establish the temporal variation of different chemical parameters (such as pH, electrical conductivity, chemical oxygen demand, organic- and inorganic carbon, nitrate- and ammonium-nitrogen, sugars and volatile fatty acids) of the leachate collected from different cells (age≈ 6-48 months) of a fully functional BLF in Mumbai, India. Furthermore, to understand the effect of the climate, MSW composition and landfill operating conditions on the rate of the decomposition process, chemical parameters of the leachate obtained from a landfill located in the central part of Poland were compared with the BLF. The study reveals that the chemical parameters, except for the pH, evince a rapid reduction with time and attain a constant value, which indicates the 'stabilized MSW'. Also, native microorganisms that are an integral part of MSW consume volatile fatty acids within a year in the BLF, which facilitate the rapid transformation of the decomposition process from acidogenesis and acetogenesis to the methanogenesis phase. It is worth iterating here that based on the long-term field study, a convenient and efficient methodology, which is currently missing from the literature, has been established to understand the kinetics of different phases of anaerobic decomposition. This study would be very helpful to the landfill operators, who are interested in accelerating MSW decomposition by augmenting leachate properties.
Asunto(s)
Eliminación de Residuos , Contaminantes Químicos del Agua , Análisis de la Demanda Biológica de Oxígeno , Reactores Biológicos , Humanos , Compuestos Orgánicos , Eliminación de Residuos/métodos , Residuos Sólidos/análisis , Instalaciones de Eliminación de Residuos , Contaminantes Químicos del Agua/químicaRESUMEN
Proper management of municipal solid waste (MSW) is crucial to avoid pollution, environmental impacts and threat to public health. The problem of MSW is mainly arising from inadequate landfill site management. The objective of this study was to evaluate the impact of management practices and environmental risks at two landfill sites. The landfills were subject to long-term (10 years) vegetation monitoring. The vegetation was assessed using a floristic survey of identified plant species. The vegetation analysis showed that significant differences existed between the two landfill locations, with neophytes, invasive and expansive species dominating on one of the landfill sites, which may be attributed to climatic and geomorphological differences between the two sites, but also to variations in landfill management. These environmentally problematic species can potentially spread from the landfill into adjacent ecosystems, displace native plants and degrade adjacent farmland areas. The study of vegetation monitoring data suggests that, in addition to other types of monitoring, landfills should be subjected to regular vegetation biomonitoring, too. Landfill management practices should target the regulation of unwanted species, create conditions that are favourable to native plant species and provide as early as possible the restoration of filled cells.
Asunto(s)
Eliminación de Residuos , Administración de Residuos , Ecosistema , Ambiente , Residuos Sólidos/análisis , Instalaciones de Eliminación de ResiduosRESUMEN
Estimation of temporal changes undergone by municipal solid waste (MSW) in its physico-chemico-geomechanical properties in a bioreactor landfill (BLF) is essential for: (i) efficient landfilling, (ii) establishing the state of decomposition of MSW with time and (iii) deciding upon the appropriate time to initiate landfill mining. To achieve this, a series of destructive (DTs) and non-destructive tests (NDTs) can be conducted on the MSW samples in the BLF. With this in view, several DTs were conducted on these samples retrieved from different depths of the two cells of a fully operational BLF in Mumbai, India. Subsequently, the physical and chemical properties of these samples such as composition, moisture content, volatile solids (VS), elemental content, lignocellulosic content (i.e. cellulose, hemicellulose and lignin content) and bio-methanation potential, were determined by following the laboratory testing, as a function of time. Also, NDTs such as cone penetration test and multichannel analysis of surface waves were conducted on these cells of BLF to obtain geomechanical parameters (viz. cone resistance, sleeve resistance, friction ratio and shear wave velocity) of the MSW. Based on the data obtained from these tests, and reported in the literature, it has been observed that the VS, elemental content, lignocellulosic content and bio-methanation potential of MSW exhibits very well-defined trends, as compared to the geomechanical parameters, with time. Furthermore, it has been observed that the VS, hydrogen-, carbon- and nitrogen-content reduce significantly (≈62%, 70%, 50% and 30%, respectively), following an exponential decay, until the critical time (tcr) (≈4 years) has been achieved. As, beyond tcr these parameters remain practically unchanged, which corresponds to the 'stabilized MSW', mining of the BLF can be initiated without further delay.
Asunto(s)
Eliminación de Residuos , Residuos Sólidos , Reactores Biológicos , Celulosa , India , Residuos Sólidos/análisis , Instalaciones de Eliminación de ResiduosRESUMEN
Displacements of landfills play an important role in the reclamation process and geotechnical safety improvement of such sites. Landfill settlements are defined as a vertical displacement of waste body due to compression, degradable nature of the waste, and creep phenomenon of the waste particles. Waste composition is more diverse than natural soil. Thus, it has to be properly placed and compacted since the landfill body will continuously settle down. Several models of the landfill displacement estimation have already been developed. The aim of the present study was: (i) to review the methods of landfill settlements computation and (ii) to propose the model allowing landfill body displacements simulation based on monitoring datasets applying a Global Navigation Satellite Systems (GNSS) measurement. The new model employs Gauss-Newton iteration and Runge-Kutta methods to estimate landfill surface displacements. The objectives were to analyse and mathematically describe the landfill body displacements. The GNSS geodetic survey and computations allowed concluding that the landfill body has been transformed over the years. The results revealed that the curves of waste displacement are in agreement with the measured total displacement of the landfill, and all curves corresponding to waste displacement are perpendicular to the active edge of the landfill. In the period of a maximum of 4.5 years after the waste deposition with a layer of up to 16.2 m thickness, the phenomenon of expansion was observed, which then disappears, and more settlement occurs due to the gravity of upper layers. The analysed landfill as a whole does not experience significant displacements. Neither of the slope failures are observed, even for large inclination.
RESUMEN
This study presents an analysis of soil contamination caused by Ni, Zn, Cd, Cu, and Pb at municipal solid waste (MSW) landfills, with a focus on ecological risk assessment. The approach aims to assess how different landfill practices and environmental conditions affect soil contamination with potentially toxic elements (PTEs) and associated environmental risks. Soil samples were collected from MSW landfills in Poland and the Czech Republic. The research included a comprehensive assessment of PTEs in soils in the context of global environmental regulations. The degree of soil contamination by PTEs was assessed using indices: Geoaccumulation Index (Igeo), Single Pollution Index (Pi), Nemerow Pollution Index (PN), and Load Capacity of a Pollutant (PLI). The ecological risk was determined using the Risk of PTEs (ERi) and Sum of Individual Potential Risk Factors (ERI). The maximum values of the indicators observed for the Radiowo landfill were as follows: Igeo = 4.04 for Cd, Pi = 24.80 for Cd, PN = 18.22 for Cd, PLI = 2.66, ERi = 744 for Cd, ERI = 771.80. The maximum values of the indicators observed for the Zdounky landfill were as follows: Igeo = 1.04 for Cu, Pi = 3.10 for Cu, PN = 2.52 for Cu, PLI = 0.27, ERi = 25 for Cd, ERI = 41.86. The soils of the tested landfills were considered to be non-saline, with electrical conductivity (EC) values less than 2,000 µS/cm. Varying levels of PTEs were observed, and geostatistical analysis highlighted hotspots indicating pollution sources. Elevated concentrations of Cd in the soil indicated potential ecological risks. Concentrations of Cu and lead Pb were well below the thresholds set by the environmental legislation in several countries. In addition, Ni concentrations in the soils of both landfills indicated that the average levels were within acceptable limits. Principal Component Analysis (PCA) revealed common sources of PTEs. The identification of specific risk points at the Radiowo and Zdounky sites contributes to a better understanding of potential hazards in landfill environments. By establishing buffer zones and implementing regular maintenance programs, emerging environmental problems can be addressed in a timely manner.
Asunto(s)
Contaminantes del Suelo , Instalaciones de Eliminación de Residuos , Contaminantes del Suelo/análisis , Contaminantes del Suelo/toxicidad , Medición de Riesgo , República Checa , Polonia , Monitoreo del Ambiente/métodos , Metales Pesados/análisis , Metales Pesados/toxicidad , Eliminación de Residuos , Suelo/química , Residuos Sólidos/análisisRESUMEN
The aim of this study was to evaluate the mobility of copper (Cu) and zinc (Zn) and their impact on the properties of bentonites and unfrozen water content. Limited research in this area necessitates further analysis to prevent the negative effects of metal interactions on bentonite effectiveness. Tests involved American (SWy-3, Stx-1b) and Slovak (BSvk) bentonite samples with Zn or Cu ion exchange. Sequential extraction was performed using the Community Bureau of Reference (BCR) method. Elemental content was analyzed via inductively coupled plasma optical emission spectrometry (ICP-OES). Unfrozen water content was measured using nuclear magnetic resonance (1H-NMR) and differential scanning calorimetry (DSC). Results showed a significant influence of the main cation (Zn or Cu) on ion mobility, with toxic metal concentrations increasing mobility and decreasing residual fractions. Mobile Zn fractions increased with larger particle diameters, lower clay content, and shorter interplanar spacing, while the opposite was observed for Cu. Zn likely accumulated in larger clay pores, while Cu was immobilized in the bentonite complex. The stability of Zn or Cu ions increased with higher clay content or specific surface area. Residual Zn or Cu fractions were highest in uncontaminated bentonites with higher unfrozen water content, suggesting the potential formation of concentrated solutions in sub-zero temperatures, posing a threat to the clay-water environment, especially in cold regions.
RESUMEN
The implementation of circular economy (CE) strategies has facilitated a comprehensive approach to waste management (WM) in university campuses. Composting food waste (FW) and biomass can mitigate negative environmental impacts and be part of a closed-loop economy. The compost can be used as a fertilizer, thereby closing the waste cycle. Implementing nudging strategies to promote effective waste segregation can help the campus move closer towards achieving neutrality and sustainability goals. The research was conducted at the Warsaw University of Life Sciences - WULS (SGGW). The University Campus is located in the south of Warsaw (Poland) and covers an area of 70 ha with 49 buildings. The SGGW campus generates selectively collected (glass, paper, plastic and metals, and biowaste) and mixed waste. Data were collected through a year-long report from the university administration. For the survey, waste data from 2019 to 2022 were obtained. The CE efficiency indicators of CE were measured. The indicators of CE efficiency for compost (Ic,ce) and plastic (Ipb,ce) showed Ic,ce at 21.05 %, which means that 1/5th of the waste generated on the campus can be introduced into the CE paradigm through composting, and the resulting value Ipb,ce of 19.96 % indicates that this amount can be reintroduced into the CE paradigm through its reuse. The results of the seasonality study showed that there were no statistically significant differences in the generated biowaste between the separated periods of the year, and the Pearson correlation coefficient (r = 0.068) provided additional confirmation. The weak correlation between the amount of biowaste generated and the average for each year (r = 0.110) also indicates a stable biowaste generation system that does not require a reduction or increase in the efficiency of waste processing, such as composting. By implementing CE strategies, university campuses can improve WM practices and achieve sustainability goals.
Asunto(s)
Eliminación de Residuos , Administración de Residuos , Humanos , Universidades , Alimentos , PlásticosRESUMEN
Geosynthetics have been commonly used for the construction of civil engineering structures such as retaining wall, road and railways, coastal protection, soft ground improvement work, and landfill systems since the 1960s. In the past 40 years, the development of polymer materials has helped to prolong the life of geosynthetics. In terms of the practical use of geosynthetics, engineers must understand their appropriate application. The first part of this paper provides a basic description of geosynthetics, including their types, components, and functions. The second part deals with the geosynthetics used as filters. This part briefly presents the mechanism of filtration, the factors affecting the durability of geotextile filters, design concepts, laboratory tests, and case studies. The third part of the study covers the use of geosynthetics for stabilisation. Its mechanism was explained separately for geogrids and for geocells. Several examples of applications with geosynthetics intended for the stabilisation function are described in the last part of this paper.
RESUMEN
The concept of a regenerative city goes far beyond a sustainable one. The regenerative approach is to think of urban green space as a productive landscape, a source of food, and a support for biodiversity. In this approach, the so-called urban wastelands have a positive significance. Urban agriculture (UA) has become a commonly discussed topic in recent years with respect to sustainable development. Therefore, the combination of urban fabric and local food production is crucial for ecological reasons. The key issues are the reduction of food miles and the demand for processed food, the production of which strains the natural environment. At the same time, UA enables regeneration and restoration. An original methodological approach was used in the study following the mixed-method research concept: literature survey, case studies, and comparative analysis of objects. A review of UA architecture (UAA) projects was carried out to supplement the knowledge acquired during the bibliometric analysis. In sum, 25 existing projects, including allotment gardens, community gardens, and urban farms in the global north, were compared in this study. As a result of the analyses carried out, the breakdown of urban agriculture was developed into the following categories: (i) architectural-urban, (ii) ecological, (iii) social, and (iv) economic, including the impact of UA on physical activity and social interaction. UA is also a factor shaping the urban landscape. In conclusion, agrarian practice in urban environments has led to the creation of a new type of space, known as UAA. Production in the context of UA exceeds private goods, such as food produced for sale or for individual use. Additional goods include public goods. The review shows that UA fulfills economic, social, and environmental functions, thus falling under the concept of sustainable development.
Asunto(s)
Agricultura , Agua , Agricultura/métodos , Ciudades , Jardines , Abastecimiento de AguaRESUMEN
In recent years, concrete technology has advanced, prompting engineers and researchers to adopt advanced materials to improve strength and durability. Steel-fiber-reinforced concrete (SFRC) represents the substantial modification of concrete materials to improve their structural properties, particularly their flexural and tensile strength. Whether SFRC is stronger than conventional concrete depends on a variety of variables, including the volume, size, percentage, shape, and distribution of fibers. This article provides a comprehensive discussion of the properties of SFRC, such as durability, fire resistance, and impact resistance or blast loading, as well as the application of SFRC in structural members including beams, columns, slabs, and walls. The application of steel fibers in various types of concrete, including pre-stressed, pre-cast, self-compacting, and geopolymer concrete, was also examined in this comparative analysis review, and recommendations for the future scope of SFRC were identified.
RESUMEN
BACKGROUND: In certain countries, including Poland, polyvinyl chloride (PVC) waste, together with di-2-ethylhexyl phthalate (DEHP) contained within (up to 60%), is mostly directed to municipal solid waste (MSW) landfills. From there, over time, it is released from the polymer matrix and can migrate with landfill leachate into the environment. The amount of DEHP placed on the Polish market since the start of industrial production and the prevalent landfilling disposal of PVC waste in Poland, indicate that DEHP pollution can increase risk factors in the future. The objective of this study was to determine the concentrations of DEHP in leachates from a chosen MSW landfill directed to a local sewage treatment plant (STP) and estimate the associated potential risks to the environment. RESULTS: DEHP concentrations in leachates ranged from < LOQ to 394.4 µg/L, depending on the sampling year and season. DEHP is a pervasive environmental contaminant present in all investigated landfill leachate samples. The results from The European Union System for the Evaluation of Substances (EUSES) modelling related to DEHP in leachate directed to STP indicated potentially unacceptable risk to freshwater organisms; and birds and mammals feeding on earthworms (where a sewage sludge applications in agriculture take place). The results indicated low risk for other environmental components including local fresh-water sediment, local soil and microorganisms of STP, and freshwater fish-eating birds and mammals. CONCLUSIONS: Future DEHP emissions may occur after the technical lifetime of the landfill and/or decay its bottom sealing. To avoid contamination, the monitoring of landfills after closure should include DEHP concentrations and last longer than the recommended (inter alia in Poland) 30 years, or until emissions from PVC to leachate are eliminated. More research on leachate of DEHP and its potential risks should be conducted, utilising detailed modelling which can including other landfills and different routes of DEHP emissions in leachates.
RESUMEN
The soil and human health issues are closely linked. Properly managed nitrogen (N) does not endanger human health and increases crop production, nevertheless when overused and uncontrolled, can contribute to side effects. This research was intended to highlight that there is a need for carrying out monitoring studies in agricultural areas in order to expand the available knowledge on the content of N forms in agricultural lands and proper management in farming practice. The impact of two types of fertilization, concerning spatially variable (VRA) and uniform (UNI) N dose, on the distribution of N forms in soils was analyzed. The analysis was performed on the basis of soil monitoring data from agricultural fields located in three different experimental sites in Poland. The analyses performed at selected sites were supported by statistical evaluation and recognition of spatial diversification of N forms in soil. It was revealed that the movement of unused N forms to deeper parts of the soil, and therefore to the groundwater system, is more limited due to VRA fertilization. Finally, it was also concluded that the management in agricultural practice should be based on the prediction of spatial variability of soil properties that allow to ensure proper application of N fertilizers, resulting in the reduction of possible N losses.
Asunto(s)
Nitrógeno , Suelo , Agricultura , Fertilizantes/análisis , Humanos , Nitrógeno/análisis , PoloniaRESUMEN
This study presents a flow pump technique usually used for evaluating the permeability of soils, which was, for first time, applied to measure the water permeability of concrete. Additionally, a new easy-to-apply method to determine permeability is proposed, based on a modification of Valenta's formula. In the calculations, the apparent air content of concrete mixes was taken into account. An additional purpose of the conducted research was to determine the influence of a new generation of polycarboxylate superplasticizer and chemically active admixtures on the permeability, compressive strength, and other properties of concrete. The following four types of concrete were tested: concrete without admixtures, concrete with an admixture to increase the compressive strength, concrete with a superplasticizer, and concrete containing two admixtures simultaneously. The results showed that the proposed method allows to obtain reliable measurements within a very short period of time. The obtained results confirmed that new method may be very useful in engineering practice, particularly in terms of the watertightness of hydrotechnical concretes and the properties of the concretes used in bridge construction, underground parts of office buildings, or sealed tanks.
RESUMEN
Polyolefin geosynthetics are susceptible to oxidative degradation, which in turn leads to diminished mechanical properties in geotechnical constructions. When using these materials, it is extremely important to determine their durability over time in particularly aggressive conditions. In order to prolong the life of a geosynthetic material, antioxidants are added during the manufacturing process. The function of antioxidants is to prevent polymer oxidation reaction in time. As the antioxidant content is depleted, the polymer becomes less protected towards oxidative attacks. This article describes the aging process of uniaxial (high density polyethylene) HDPE geogrids under the influence of chemical and environmental factors. Evaluations of accelerated aging test of the uniaxial HDPE geogrids were incubated in simulated landfill conditions for a period of 12 months. Three temperatures (25 °C, 45 °C, and 75 °C) were selected for carrying out the aging experiments in aqueous solutions mimicking landfill conditions. The changes observed by differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR) and melt flow index (MFI) correlate with the mechanical properties of the aged geogrid. No significant changes in the FTIR and MFI were observed over the 12 months of accelerated aging tests at none of the three different temperatures. The oxidation induction time (OIT) test showed no antioxidant remaining in the geogrid following eight months of aging test at 75 °C. No significant changes in the influence of accelerated aging tests on the average relative elongation at 25 °C and 45 °C of the tested material were observed. Accelerated aging tests at 75 °C showed that the mean elongation of 12.12% for the sample not subjected to accelerated aging tests (new sample) increased to 19.32% (after 12 months of incubation).
RESUMEN
Waste composting is becoming a key element of integrated waste management. Composting has a number of advantages, including economic benefits, improvement of soil properties through the use of compost, reduction in the use of chemical fertilisers, and minimization of environmental pollution. Composting on a landfill surface appears to be an economical solution that can help close the waste loop and material cycle. In this study, a composting plant located on a landfill surface was analysed. The main objective of the research was to identify the species of plants growing in the organic fraction of municipal solid waste in temporary storage, in the composting plant, and in maturing compost located in a reclaimed plot at the landfill site. During monitoring, 88 plant species were identified altogether. It was observed that compost can become a source of weed infestation. To control the presence of weeds in the compost, basic principles of composting are to be followed to reduce the quantity of weed seeds. The thermophilic phase must occur to reduce the viability of seeds in the input materials and sufficient moisture must be ensured during the composting process. When these principles are strictly observed and the stored compost is maintained without vegetation, the supply of seeds in the compost will be low, and the undesirable spread of plant species to adjacent areas will be controlled. The results showed that the use of the obtained compost did not result in the propagation of weed species. This study demonstrates that composting on a reclaimed landfill offers various advantages such as a closed waste management cycle, coverage of the active landfill body, and fertilisation of the reclaimed part of the landfill.
RESUMEN
One of crucial waste management problems is the management of organic waste. This activity employs the composting. In case of green waste, its application seems reasonable, whereas the use of selected mixed waste raises problems related to the compost quality. Across countries, the non-sterile organic fraction of municipal solid waste is being separated through the mechanical-biological treatment. The technology is a solution of waste treatment and meets objectives set out in the Landfill Directive. There are many problems associated with the use of output products. The use of compost as a fertilizer requires determination of its impact on the environment. Compost quality can be assessed using analytical methods and phytotoxicity tests. Therefore, the aim of this study was to describe changes in physico-chemical, enzymatic, phytotoxicity and vegetation parameters occurring in composts from two systems - a prismatic installation for green waste, and a mechanical-biological treatment installation. The compost from green waste exhibited greater stability. Values of dehydrogenase activity were lower if compared with the mechanically and biologically treated compost, which indicates lower compost maturity. The biomass production of Brassica napus L. and Fetuca rubra L. was higher in the variant with the application of green compost. The influence on Hordeum vulgare L., Cannabis sativa L., and Sinapis alba L. depended on the plant type and the compost used. Nevertheless, the compost from green waste was less toxic. The evidence from this study suggests that the mechanical-biological treatment had problems associated with the maturation and quality of the final product.
Asunto(s)
Compostaje , Administración de Residuos , Biomasa , Suelo , Residuos SólidosRESUMEN
When the landfill use comes to end, important subsequent steps include aftercare, safety assurance, and ecological regeneration. Landfill revegetation is cost-effective and eco-friendly approach in the management of landfill areas, which serves the purpose of stabilization and provides a pleasant landscape. There are various vegetation types that can be planted, yet grass species are often used for low-cost reasons. Plants can be important sources of air pollution, particularly by grass pollen. The main goal of our study was to identify plant species that produce allergenic pollen. Long-term vegetation monitoring took place on three sites in the growing seasons of years 2008-2018. Studied objects were landfills located in the Czech Republic. The vegetation was assessed using a floristic survey of identified plant species. Plant species that produced allergens were recorded. During the monitoring, 298 plant species were determined. Plant species with allergenic pollen have a considerable share in the landfill vegetation. Thus, landfills are potential sources of various kinds of allergenic pollen. Moreover, our results indicated that there are three periods of pollen production: early spring, late spring, and early summer; late summer; and autumn. The second period is typical for the production of highly allergenic pollen by grasses. Most detected plant species with allergenic pollen are common for all monitored sites, which demonstrates that the vegetation of landfills is a significant source of allergenic pollen.