10-Plex Digital Polymerase Chain Reaction with Four-Color Melting Curve Analysis for Simultaneous KRAS and BRAF Genotyping.

Digital PCR (dPCR) is a promising method for performing liquid biopsies that quantifies nucleic acids more sensitively than real-time PCR. However, dPCR shows large fluctuations in the fluorescence intensity of droplets or wells due to insufficient PCR amplification in the small partitions, limiting the multiplexing capability of using the fluorescence intensity. In this study, we propose a measurement method that combines dPCR with melting curve analysis for highly multiplexed genotyping. A sample was digitized into a silicon chip with up to 2 × 104 wells in which asymmetric PCR was performed to obtain more single-stranded amplicons that were complementary to molecular beacon probes. Fluorescence images were captured while controlling the temperature of the chip, and the melting curve was measured for each well. Then, genotyping was performed by using the fluorescence intensity, the dye color of the probe, and the melting temperature (Tm). Because the Tm of the PCR products is not highly dependent on the amplification efficiency of PCR, genotyping accuracy is improved by using Tm values, enabling highly multiplexed genotyping. The concept was confirmed by simultaneously identifying wild-type KRAS, BRAF, and eight mutants of these genes (G12D, G12R, G12V, G13D, G12A, G12C, G12S, and V600E) through four-color melting curve analysis. To the best of our knowledge, this is the first demonstration of the genotyping of 10 DNA groups including single mutations of cancer-related genes by combining dPCR with four-color melting curve analysis.

Parallel Evaluation of Melting Temperatures of DNAs in the Arrayed Droplets through the Fluorescence from DNA Intercalators.

Parallel evaluation of melting temperatures (Tm's) of DNA molecules in multiple floating droplets (20 µm in diameter) was demonstrated. The Tm values were evaluated from the melting curves which were observed through the fluorescence from the DNA intercalators. The Tm values measured in the droplets corresponded well to those measured in the bulk, indicating the validity of the measurement. The parallel evaluation of Tm's was realized by observing melting curves of DNAs in the different droplets at the same time using the "droplet guide", which guided and fixed the floating droplets to the designated points in the observing plane. This demonstration would pave the way for the improvement of the precision of droplet digital PCR (ddPCR), whose state-of-the-art ascribes color and intensity of fluorescence to the base sequence of DNA in the droplet.

KRAS genotyping by digital PCR combined with melting curve analysis.

Digital PCR (dPCR) has been developed as a method that can quantify nucleic acids more sensitively than real-time PCR. However, dPCR exhibits large fluctuations in the fluorescence intensity of the compartment, resulting in low accuracy. The main cause is most likely due to insufficient PCR. In this study, we proposed a new method that combines dPCR with melting curve analysis and applied that method to KRAS genotyping. Since the melting temperature (Tm) of the PCR product hardly depends on the amplification efficiency, genotyping accuracy is improved by using the Tm value. The results showed that the peaks of the distribution of the Tm values of DNA in the wells were 68.7, 66.3, and 62.6 °C for wild-type KRAS, the G12R mutant, and the G12D mutant, respectively, and the standard deviation of the Tm values was 0.2 °C for each genotype. This result indicates that the proposed method is capable of discriminating between the wild-type sequence and the two mutants. To the best of our knowledge, this is the first demonstration of the genotyping of single mutations by combining melting curve analysis and dPCR. The application of this approach could be useful for the quantification and genotyping of cancer-related genes in low-abundance samples.

DNA probes on beads arrayed in a capillary, 'Bead-array', exhibited high hybridization performance.

A DNA analysis platform called 'Bead-array' is presented and its features when used in hybridization detection are shown. In 'Bead-array', beads of 100- micro m diameter are lined in a determined order in a capillary. Each bead is conjugated with DNA probes, and can be identified by its order in the capillary. This probe array is easily produced by just arraying beads conjugated with probes into the capillary in a fixed order. The hybridization is also easily completed by introducing samples (1-300 micro l) into the capillary with reciprocal flow. For hybridization detection, as little as 1 amol of fluorescent-labeled oligo DNA was detected. The hybridization reaction was completed in 1 min irrespective of the amount of target DNA. When the number of target molecules was smaller than that of probe molecules on the bead, 10 fmol, almost all targets were captured on the bead. 'Bead-array' enables reliable and reproducible measurement of the target quantity. This rapid and sensitive platform seems very promising for various genetic testing tasks.

Rapid multiplex single nucleotide polymorphism genotyping based on single base extension reactions and color-coded beads.

A single nucleotide polymorphism (SNP) typing method using color-coded beads is promising because it is easy to use and inexpensive. However, the present protocols are not suitable for clinical and diagnostic applications because they need centrifugation for bead-washing. Here, we developed a simplified protocol without a bead-washing procedure that enables SNP typing of PCR amplified fragments in only 30 min.

A bead-alignment device with a bead-sized microchamber on a rotating cylinder for fabrication of a miniaturized probe array.

We have developed a compact bead-alignment device with a bead-sized microchamber on a rotating cylinder. The cylinder fits inside a tube with bead-stock pipes containing different probe-conjugated beads and holes for bead-alignment capillaries. The cylinder rotates in the tube, and the microchamber transfers a single 100-microm-diameter bead from a pipe to one of the capillaries in 10 s. By using this process repeatedly, 'bead arrays', which are miniaturized DNA probe arrays in capillaries, were successfully fabricated.

Hybridization reaction kinetics of DNA probes on beads arrayed in a capillary enhanced by turbulent flow.

The hybridization reaction kinetics of DNA probes on beads arrayed in a capillary was investigated experimentally and theoretically by using fluid mechanical methods. A device was prepared to contain DNA probes conjugated on 103-microm-diameter beads that were queued in a 150-microm-diameter capillary. The hybridization experiments were performed by introducing sample into the capillary and moving it with a one-way or a reciprocal flow. From the relation between Reynolds number and the resistance coefficient of the system, we found that the flow in the system was turbulent and not laminar as has been said of other microfluidic devices. The reaction efficiency was estimated using a mass-transfer coefficient derived from Chilton-Colburn's analogy. The estimate agreed well with the experimental data. A diffusion equation under laminar assumption was also solved, but this estimated value was 4.0-10.4 times smaller than the experimental data. Using the device achieved a hybridization efficiency as high as approximately 90% in 10 min. It was concluded that the high hybridization performance of the device resulted from turbulent flow and that the flow compensated the slow molecular diffusion. Using this bead-included structure resulted in a rapid and effective reaction at the solid-liquid interface, and the device seems very promising for many future applications.

Automated bead alignment apparatus using a single bead capturing technique for fabrication of a miniaturized bead-based DNA probe array.

We have developed an automated bead alignment apparatus for fabricating a bead-based DNA probe array inside a capillary. The apparatus uses 16 micro vacuum tweezers to extract single beads from among a large amount of beads in bead stock wells. It then manipulates single beads into the probe array capillaries. Single 100-microm-diameter beads were successfully extracted from the water-contained bead-stock well by the vacuum tweezers, which have inner and outer diameters of 50 and 150 microm. An interesting aspect is that unexpected extra beads adsorbed on the outer wall of the vacuum tweezers can be removed using the surface tension force between the water and the atmosphere. In testing the total performance of this apparatus, the DNA probe arrays with 10 sets of probe-conjugated beads and 2 plain beads were produced in the intended order in the capillaries. The time needed to align the 12 beads was 10 min, and the 16 bead arrays were fabricated simultaneously. After hybridization experiments using these fabricated DNA probe arrays, fluorescence from each bead was clearly observed.

High-speed DNA sequencing by tube-based capillary electrophoresis.

We assessed the feasibility of high-speed DNA sequencing by tube-based capillary electrophoresis (TCE) with electrokinetic sample injections. We developed a water-circulated TCE system to control the capillary temperature precisely. Using this system and a ready-made sieving matrix at 50 degrees C, single-stranded DNA size marker fragments were separated at various pairs of the electric field strength, E, of 128-480 V/cm and the capillary effective length, L, of 100-360 mm. Assuming the read length (RL) is the fragment size at which the peak width equals the peak interval per base in obtained electropherograms, we estimated the values of RL (E, L), the RL at the pair (E, L). The points in ELz-space, (E, L, RL(E, L)), form a curved surface expressed by z = RL(E, L). Analyzing the contour lines of this curved surface, we determined the pairs of E and L providing target RLs of 300-500 bases within a minimum time. At a pair optimized for a 500-base RL (330 V/cm, 200 mm), one-color sequencing fragments were successfully separated up to 529 bases within 9.6 min. These results demonstrate that high-speed DNA sequencing comparable with that obtained by microfabricated chip-based capillary electrophoresis (MCE) can be achieved with TCE, which is more suitable in automation than MCE.