Simultaneous removal of tetracycline hydrochloride and hexavalent chromium by heterogeneous Fenton in a photocatalytic fuel cell system.

In this work, a novel double-chamber system (PFC-Fenton), combined photocatalytic fuel cell (PFC) with Fenton, was constructed for tetracycline hydrochloride (TCH) and hexavalent chromium (Cr(VI)) removal and electricity production. Therein, Zn5(OH)6(CO3)2/Fe2O3/BiVO4/fluorine-doped SnO2 (ZIO/BiVO4/FTO) and carboxylated carbon nanotubes/polypyrrole/graphite felt (CCNTs/Ppy/GF) were served as photoanode and cathode, respectively. Under light irradiation, the removal efficiencies of TCH and Cr(VI) with the addition of H2O2 (2 mL) could reach 93.1% and 80.4%, respectively. Moreover, the first-order kinetic constants (7.37 × 10-3 min-1 of TCH and 3.94 × 10-3 min-1 of Cr(VI)) were 5.26 and 5.57 times as much as the absence of H2O2. Simultaneously, the maximum power density could be obtained 0.022 mW/cm2 at a current density of 0.353 mA/cm2. Therein, the main contribution of TCH degradation was ·OH and holes in anode chamber. The synergistic effect of photoelectrons, generated ·O2-, and H2O2 played a crucial role in the reduction of Cr(VI) in cathode chamber. The high-performance liquid chromatography-mass spectrometry indicated that TCH could be partially mineralized into CO2 and H2O. X-ray photoelectron spectroscope and X-ray absorption near-edge structure spectra showed that Cr(VI) could be reduced to Cr(III). After 5 times of cycling, the removal efficiencies of TCH and Cr(VI) were still greater than 70%, indicating the remarkable stability of the PFC-Fenton system. Overall, this system could remove TCH/Cr(VI) and generate power simultaneously without iron sludge formation, demonstrating a promising method to further develop PFC-Fenton technology.

Three birds with one stone: Sewage sludge deep-drying in 1 hour using secondary aluminum ash to fabricate bricks.

Due to the high moisture, strong hydrophilicity, and hard compressibility of sewage sludge (SS), it is difficult to realize the high-efficiency drying. Herein, a novel SS drying technology was developed to quickly and deeply reduce the moisture of SS from 75.6% to 38.5% in 1 h. During the process, secondary aluminum ash (SAA), a solid waste, was added to SS and acted as skeletons to form plenty of channels. Subsequently, NaOH was added and reacted with SAA to produce a lot of heat, resulting in a rapid temperature rise of the system from 20 to 105°C in 60 s. The heat could effectively remove water from these channels, which could be proved by the T1-T2 maps of in-site Low-Field 1H nuclear magnetic resonance. In addition, the extracellular polymeric substances were decomposed by SAA/NaOH successfully, and thus the SS became hydrophobic, favoring the drying. Finally, the dried SS could be used to fabricate unburned bricks. Thus, this work provides a promising method to realize the rapid SS deep drying and high-efficiency utilization of SAA and dried SS.

Effects of DNA, RNA, and Protein Methylation on the Regulation of Ferroptosis.

Ferroptosis is a form of programmed cell death characterized by elevated intracellular ferrous ion levels and increased lipid peroxidation. Since its discovery and characterization in 2012, considerable progress has been made in understanding the regulatory mechanisms and pathophysiological functions of ferroptosis. Recent findings suggest that numerous organ injuries (e.g., ischemia/reperfusion injury) and degenerative pathologies (e.g., aortic dissection and neurodegenerative disease) are driven by ferroptosis. Conversely, insufficient ferroptosis has been linked to tumorigenesis. Furthermore, a recent study revealed the effect of ferroptosis on hematopoietic stem cells under physiological conditions. The regulatory mechanisms of ferroptosis identified to date include mainly iron metabolism, such as iron transport and ferritinophagy, and redox systems, such as glutathione peroxidase 4 (GPX4)-glutathione (GSH), ferroptosis-suppressor-protein 1 (FSP1)-CoQ10, FSP1-vitamin K (VK), dihydroorotate dehydrogenase (DHODH)-CoQ, and GTP cyclohydrolase 1 (GCH1)-tetrahydrobiopterin (BH4). Recently, an increasing number of studies have demonstrated the important regulatory role played by epigenetic mechanisms, especially DNA, RNA, and protein methylation, in ferroptosis. In this review, we provide a critical analysis of the molecular mechanisms and regulatory networks of ferroptosis identified to date, with a focus on the regulatory role of DNA, RNA, and protein methylation. Furthermore, we discuss some debated findings and unanswered questions that should be the foci of future research in this field.

Deep vein thrombosis: related to anemophilous pollen?

The etiology of deep vein thrombosis (DVT) is still not elucidated nowadays. Based on the accordance between DVT incidence and the anemophilous pollen concentration in the air, we proposed the hypothesis that allergic reaction induced by anemophilous pollen may cause "idiopathic" DVT, and proinflammatory factors may play an important role in the thrombosis process.

Microwave-assisted liquefaction of carbohydrates for 5-hydroxymethylfurfural using tungstophosphoric acid encapsulated dendritic fibrous mesoporous silica as a catalyst.

Tungstophosphoric acid (TPA) encapsulated dendritic fibrous silica KCC-1 was prepared via a microemulsion system with the simple reflux method using cetyltrimethylammonium bromide as a structure-directing agent. The TPA impregnated on KCC-1 (ITPA-KCC-1) was also prepared for comparative. Various physicochemical techniques were used to characterize the synthesized materials and their activity evaluated in the 5-hydroxymethylfurfural (HMF) formation from carbohydrates derivatives of fructose, glucose and cellulose. The effect of various factors such as catalyst to substrate ratio, different solvents and temperature were investigated on the formation of HMF. The resultant encapsulated catalyst was very active in fructose dehydration with the yield of 92% HMF and full conversion of fructose at 120 °C for 30 min under the microwave heating condition without any salt additive in the THF solvent system as well as 95% in MIBK solvent. The HMF yield was achieved by 58% and 16.2% from glucose and cellulose in the DMSO solvent, respectively. The TPA-KCC-1 can be separated easily after reaction from the reaction mixture and reused atleast five times without substantial loss in catalytic activity. This study provides an easy encapsulation method for TPA in dendritic fibrous silica KCC-1 as a heterogeneous catalyst, and it should have great application potential in other biomass valorization processes.

Hydrocarbon rich bio-oil production, thermal behavior analysis and kinetic study of microwave-assisted co-pyrolysis of microwave-torrefied lignin with low density polyethylene.

This study aims to enhance the quality of biofuel through microwave torrefaction pretreatment for lignin. Low density polyethylene (LDPE) was added as a hydrogen source during microwave co-pyrolysis along with the microwave-torrefied lignin (MTL). The thermal degradation behavior and kinetic study of MTL co-pyrolysis with LDPE by microwave-assisted heating was investigated as well. The results indicated that the hydrocarbon content in the bio-oil obtained from microwave co-pyrolysis of MTL and LDPE increased significantly (about 80%). It was also noticed that the aromatic hydrocarbon content increased from 1.94% to 22.83% with the addition of LDPE. Thermal behavior analysis and reaction kinetic study showed that the addition of LDPE into MTL had the effect of promoting thermal degradation and improving reaction rate during microwave-assisted pyrolysis.