Weakly Solvating Ether-Based Electrolyte Constructing Anion-Derived Solid Electrolyte Interface in Graphite Anode toward High-Stable Potassium-Ion Batteries.

Low-cost graphite has emerged as the most promising anode material for potassium-ion batteries (PIBs). Constructing the inorganic-rich solid electrolyte interface (SEI) on the surface of graphite anode is crucial for achieving superior electrochemical performance of PIBs. However, the compositions of SEI formed by conventional strongly solvating electrolytes are mainly organic, leading to the SEI structure being thick and causing the co-intercalation behavior of ions with the solvent. Herein, a weakly solvating electrolyte is applied to weaken the cation-solvent interaction and alter the cation solvation sheath structures, conducing to the inorganic composition derived from anions also participating in the formation of SEI, together with forming a uniformly shaped SEI with superior mechanical properties, and thus improving the overall performance of PIBs. The electrolyte solvation structure rich in aggregated ion pairs (AGGs) (69%) enables remarkable potassium-ion intercalation behavior at the graphite anode (reversible capacity of 269 mAh g-1) and highly stable plating/stripping of potassium metal anode (96.5%). As a practical device application, the assembled potassium-ion full-battery (PTCDA//Graphite) displays superior cycle stability. The optimizing strategy of cation solvation sheath structures offers a promising approach for developing high-performance electrolytes and beyond.

In Situ Defect Engineering in Carbon by Atomic Self-Activation to Boost the Accessible Low-Voltage Insertion for Advanced Potassium-Ion Full-Cells.

Enhancing the low-potential capacity of anode materials is significant in boosting the operating voltage of full-cells and constructing high energy-density energy storage devices. Graphitic carbons exhibit outstanding low-potential potassium storage performance, but show a low K+ diffusion kinetics. Herein, in situ defect engineering in graphitic nanocarbon is achieved by an atomic self-activation strategy to boost the accessible low-voltage insertion. Graphitic carbon layers grow on nanoscale-nickel to form the graphitic nanosphere with short-range ordered microcrystalline due to nickel graphitization catalyst. Meanwhile, the widely distributed K+ in the precursor induces the activation of surrounding carbon atoms to in situ generate carbon vacancies as channels. The graphite microcrystals with defect channels realize reversible K+ intercalation at low-potential and accessible ion diffusion kinetics, contributing to high reversible capacity (209 mAh g-1 at 0.05 A g-1 under 0.8 V) and rate capacity (103.2 mAh g-1 at 1 A g-1). The full-cell with Prussian blue cathode and graphitic nanocarbon anode maintains an obvious working platform at ca. 3.0 V. This work provides a strategy for the in situ design of carbon anode materials and gives insights into the potassium storage mechanism at low-potential for high-performance full-cells.

Carbene-Catalyzed [4+2] Cycloaddition of Cyclobutenones and Isatins for Quick Access to Chiral Chlorine-Containing Spirocyclic δ-Lactones.

Here we report a carbene-catalyzed enantio- and diastereoselective [4+2] cycloaddition reaction of cyclobutenones with isatins for the quick and efficient synthesis of spirocyclic δ-lactones bearing a chiral chlorine. A broad range of substrates with various substitution patterns proceed smoothly in this reaction, with the spirooxindole δ-lactone products afforded in generally good to excellent yields and optical purities under mild reaction conditions.

The value of cardiopulmonary comorbidity in patients with acute large vessel occlusion stroke undergoing endovascular thrombectomy: a retrospective, observational cohort study.

BACKGROUND: Chronic lung and heart diseases are more likely to lead an intensive end point after stroke onset. We aimed to investigate characteristics and outcomes of endovascular thrombectomy (EVT) in patients with acute large vessel occlusion stroke (ALVOS) and identify the role of comorbid chronic cardiopulmonary diseases in ALVOS pathogenesis. METHODS: In this single-center retrospective study, 191 consecutive patients who underwent EVT due to large vessel occlusion stroke in neurological intensive care unit were included. The chronic cardiopulmonary comorbidities and several conventional stroke risk factors were assessed. The primary efficacy outcome was functional independence (defined as a mRS of 0 to 2) at day 90. The primary safety outcomes were death within 90 days and the occurrence of symptomatic intracranial hemorrhage(sICH). Univariate analysis was applied to evaluate the relationship between factors and clinical outcomes, and logistic regression model were developed to predict the prognosis of ALVOS. RESULTS: Endovascular therapy in ALVOS patients with chronic cardiopulmonary diseases, as compared with those without comorbidity, was associated with an unfavorable shift in the NHISS 24 h after EVT [8(4,15.25) versus 12(7.5,18.5), P = 0.005] and the lower percentage of patients who were functionally independent at 90 days, defined as a score on the modified Rankin scale of 0 to 2 (51.6% versus 25.4%, P = 0.000). There was no significant between-group difference in the frequency of mortality (12.1% versus 14.9%, P = 0.580) and symptomatic intracranial hemorrhage (13.7% versus 19.4%, P = 0.302) or of serious adverse events. Moreover, a prediction model showed that existence of cardiopulmonary comorbidities (OR = 0.456, 95%CI 0.209 to 0.992, P = 0.048) was independently associated with functional independence at day 90. CONCLUSIONS: EVT was safe in ALVOS patients with chronic cardiopulmonary diseases, whereas the unfavorable outcomes were achieved in such patients. Moreover, cardiopulmonary comorbidity had certain clinical predictive value for worse stroke prognosis.

Fe Engineering on Ru Nanosheets for Enhanced Hydrogen Evolution in pH-Universal Media.

Fe-modified Ru nanosheets are achieved via preintercalated Al species serving as the self-sacrificial template. Benefiting from the amphoteric feature of Al and strong corrosion of Fe3+ ions, Fe is effectively incorporated into pristine Ru nanosheets. Correspondingly, the surface oxophilicity is improved, promoting the Volmer step. The charge density redistribution weakens hydrogen combination on Ru and thus accelerates the desorption kinetics (Heyrovsky step). Meanwhile, more defective sites are exposed, leading to an enhanced hydrogen production in pH-universal electrolytes.

Lewis acid mediated cyclization: synthesis of 2 spirocyclohexylindolines.

Herein, we report the synthesis of 2-spirocyclohexylindolines based on a Lewis acid mediated cyclization. This diastereoselective procedure provides the target structures in a straightforward way via dual activation.

Identifying the Active Site on Graphene Oxide Nanosheets for Ambient Electrocatalytic Nitrogen Reduction.

Identifying the active sites on graphene oxide (GO) nanosheets is of great importance. In situ electroreduction at different potentials is applied to control the oxygenated groups on GO surfaces. Both experiments and theoretical calculations suggest the C═O group is critical for N2 adsorption and activation, guaranteeing the ambient electrocatalytic N2 reduction.

Activating Graphyne Nanosheet via sp-Hybridized Boron Modulation for Electrochemical Nitrogen Fixation.

Exploring new metal-free catalysts with high activity for nitrogen reduction reaction (NRR) is highly desirable but remains a big challenge. Graphyne (GY) is a typical two-dimensional carbon material with many excellent properties. However, the NRR has rarely been envisaged on a GY-based metal-free catalyst up to now. Density functional theory calculations reveal that although pristine GY is inactive for N2 reduction, boron modulation can endow it with efficient activity toward NRR. Natural bond orbitals analysis, spin/charge density distributions, and free energy change diagrams are performed and discussed. Three boron doping formats including sp2-substituted, sp-substituted, and adsorbed configuration are considered. The obtained data show sp-substitution will induce local moderate spin and charge densities at the boron site on the GY surface, which is convenient for N2 adsorption and activation, and conductive to N-related intermediates formation and transformation. Moreover, the incorporated sp-hybridized boron can provide one empty p orbital and one occupied p orbital around itself, which plays a key role as an electron reservoir to accept electrons from and donate electrons to the adsorbed N-related species, and thus facilitate N2 reduction and ammonia synthesis. Henceforth, it provides more opportunities for preparing GY and other carbon materials as efficient catalysts toward renewable energy conversion and storage.

Holey Ruthenium Nanosheets with Moderate Aluminum Modulation toward Hydrogen Evolution.

Theoretical calculations reveal that aluminum (Al) doping can effectively modulate the electronic structures of 2D ruthenium (Ru) catalysts. Moderate Al incorporation can endow Ru nanosheets with more delocalized electrons and optimal hydrogen adsorption Gibbs free energy, providing opportunities to achieve improved hydrogen evolution performance. Thus, Al-doped Ru nanosheets have been synthesized by a solvothermal strategy, in which they exhibit holey nanosheet structures and have more active sites exposed on the basal plane. The characterizations unraveling the Ru structure can be well maintained, and electrochemical measurements confirm the appropriate amount of Al modulation that can extremely enhance its hydrogen evolution activity.

Enhanced Oxygen Evolution Reaction for Single Atomic Co Catalyst via Support Modification: A Density Functional Theory Design Predication.

Design and development of a single atomic catalyst with high activity is desirable but proved to be very challenging in the renewable energy conversion and storage technologies. As a classic carbon material, graphene has many excellent properties and thus may be a good support to stabilize the isolated metal atoms. However, the oxygen evolution activity of a single cobalt atom supported on graphene is still very low. To improve its performance, support modification has been carried out based on a density functional theory framework for the design predication. In our theoretical study, two nitrogen formats are incorporated to the graphene substrates, including graphitic nitrogen and pyridine-like nitrogen, which are usually observed in experiment. The oxygen evolution process has been envisaged on these single cobalt atom catalysts via gas phase adsorption calculation. The electronic structure on the single Co active site can be effectively regulated by the support modification, which will contribute to its enhanced performance. Henceforth, free energy change diagrams, partial density of states, Raman spectra, and charge density difference are discussed. It is suggested that incorporating pyridine-like nitrogen on graphene is an ideal approach for the supported Co atom to achieve high OER activity, opening up new opportunity for the preparation and application of highly active and stable single atomic catalysts.

Facile Preparation of Amorphous Fe-Co-Ni Hydroxide Arrays: A Highly Efficient Integrated Electrode for Water Oxidation.

Facile and fast synthesis of functional materials with high catalytic activity is highly demanded to meet the industrial production and applications such as electrolysis. In this study, Ni foam is employed as the current collector and Ni source, which is dipped into the mixture of Fe and Co metal ions solution at room temperature for several minutes, to in situ grow Fe-Co-Ni hydroxide arrays and construct the three-dimensional integrated electrode. This short-time preparation at room temperature is beneficial to avoid the rapid growth of the generated primary nanocrystallites and cause intimate interactions between Fe, Co, and Ni atoms. The obtained self-supported and vertically aligned Fe-Co-Ni hydroxides present an amorphous phase, which exhibit high activity with low overpotentials of 212 mV at 10 mA cm-2 and 319 mV at 100 mA cm-2, associated with a small Tafel slope of 52 mV dec-1 toward the oxygen evolution reaction.

Design and discovery of thioether and nicotinamide containing sorafenib analogues as multikinase inhibitors targeting B-Raf, B-RafV600E and VEGFR-2.

New sorafenib derivatives containing thioether and nicotinamide moiety were designed and synthesized as B-Raf, B-RafV600E and VEGFR-2 multikinase inhibitors. Their in vitro enzymatic inhibitory activities against B-Raf, B-RafV600E and VEGFR-2 and their antiproliferative activities against HCT-116 and B16BL6 cell lines were evaluated and described. Most of the compounds showed potent activities against both cell lines and specific kinases. Compounds a1, b1 and c4, which exhibited the most potent inhibitory activities against B-Raf with IC50 of 21 nM, 27 nM and 17 nM, B-RafV600E with IC50 of 29 nM, 28 nM and 16 nM, VEGFR-2 with IC50 of 84 nM, 46 nM and 63 nM, respectively, and good antiproliferative activities, also demonstrated competitive antiangiogenic activities to sorafenib in in vitro HUVEC tube formation assay.

Elemental two-dimensional nanosheets beyond graphene.

The great success of graphene has encouraged the fast development of other two-dimensional (2D) nanosheets, which have attracted extensive attention in different scientific fields encompassing field effect transistors, lithium-ion batteries, and catalysis. With atomic-scale thickness, almost all of the atoms are exposed on the surface, providing an extremely high specific surface area, in conjunction with special physical, chemical, and electronic properties, owing to the quantum confinement effects, which enable their surface phase to be as important as the bulk counterparts. In this review, we have summarized and discussed the recent advancements of 2D nanomaterials beyond graphene, with an emphasis on their basic fundamentals, preparation strategies, and applications. We believe that this review supplies critical insights for exploring and understanding 2D nanomaterials and puts forward the challenges and opportunities for further developments, such as more precise morphology control, foreign atom doping and surface modification technologies, atomic-scale characterization, and finding wide applications in many different fields.

Free-Standing Holey Ni(OH)2 Nanosheets with Enhanced Activity for Water Oxidation.

Electrochemical water oxidation is the key technology in water-splitting reactions and rechargeable metal-air batteries, which is very attractive for renewable energy conversion and storage. Replacement of precious catalysts with cost-effective and highly active alternatives is still a great challenge. Herein, based on theoretical predictions, holey structures are designed and fabricated on the free-standing conventional 2D OER catalyst. By well-controlled defects engineering, uniform tiny holes are created on the free-standing Ni(OH)2 nanosheets via a sol-gel method, with the embedded Zn components as the template for holes production. The whole preparation process is feasible and effective to make full use of the basal plane of 2D nanomaterials, which can provide higher surface area, richer defects, more grain boundaries, and edge sites, as well as greater distorted surfaces. Meanwhile, these holes developed inside the sheet structure can supply tremendous permeable channels for ions adsorption and transportation, enable a fast interfacial charge transfer and accelerate the reaction process. The as-prepared 2D holey Ni(OH)2 nanostructures exhibit excellent catalytic performance toward electrochemical water oxidation, with lower onset overpotentials and higher current densities compared with the pristine Ni(OH)2 catalyst, suggesting the holey defects engineering is a promising strategy for efficient water-splitting devices and rechargeable metal-air batteries.

Anion Engineering on Free-Standing Two-Dimensional MoS2 Nanosheets toward Hydrogen Evolution.

On the basis of theoretical predictions, nitrogen was designed and incorporated into free-standing two-dimensional MoS2 nanosheets. Both the amount of electrochemical active sites on the surface and its intrinsic conductivity could be significantly increased as a result of anion engineering, which can extremely improve the electrocatalytic kinetics toward hydrogen evolution.

A Generic Wet Impregnation Method for Preparing Substrate-Supported Platinum Group Metal and Alloy Nanoparticles with Controlled Particle Morphology.

Mass production of shape-controlled platinum group metal (PGM) and alloy nanoparticles is of high importance for their many fascinating properties in catalysis, electronics, and photonics. Despite of successful demonstrations at milligram scale using wet chemistry syntheses in many fundamental studies, there is still a big gap between the current methods and their real applications due to the complex synthetic procedures, scale-up difficulty, and surface contamination problem of the made particles. Here we report a generic wet impregnation method for facile, surfactant-free, and scalable preparation of nanoparticles of PGMs and their alloys on different substrate materials with controlled particle morphology and clean surface, which bridges the outstanding properties of these nanoparticles to practical important applications. The underlying particle growth and shape formation mechanisms were investigated using a combination of ex situ and in situ characterizations and were attributed to their different interactions with the applied gas molecules.

Design and Discovery of Quinazoline- and Thiourea-Containing Sorafenib Analogs as EGFR and VEGFR-2 Dual TK Inhibitors.

Both EGFR and VEGFR-2 play a critical role in tumor growth, angiogenesis and metastasis, and targeting EGFR and VEGFR-2 simultaneously represents a promising approach to cancer treatment. In this work, a series of novel quinazoline- and thiourea-containing sorafenib analogs (10a-v) were designed and synthesized as EGFR and VEGFR-2 dual TK inhibitors. Their in vitro enzymatic inhibitory activities against EGFR and VEGFR-2, and antiproliferative activities against HCT-116, MCF-7 and B16 cell lines were evaluated and described. Most of the compounds showed potent activities against both cell lines and TK kinases. Compounds 10b and 10q which exhibited the most potent inhibitory activities against EGFR (IC50 = 0.02 µM and 0.01 µM, respectively), VEGFR-2 (IC50 = 0.05 µM and 0.08 µM, respectively), and good antiproliferative activities, also displayed competitive anti-tumor activities than sorafenib in vivo by B16 melanoma xenograft model test.

[Clinical analysis of difficult intraarterial mechanical thrombectomy in patients with acute ischemic stroke].

OBJECTIVE: To investigate the causes and strategy of difficult intraarterial mechanical thrombectomy (≥3 times) in patients with acute ischemic stroke (AIS). METHODS: The clinical data of 8 cases of AIS with thrombectomy ≥3 times admitted in Department of Neurology, the 306(th) Hospital of People's Liberation Army from June to October in 2015 was analyzed retrospectively. There were 7 male and 1 female patients, aged from 38 to 86 years with an average age of (70±15) years, in which 5 cases were cardiogenic cerebral embolism and 3 cases were large artery atherosclerotic infarction. The National Institute of Health stroke scale (NIHSS) score (M (QR)) was 16 (12) before procedure and modified thrombolysis in cerebral infarction (mTICI)score were 0 in all the patients. Solitaire AB was used in thrombectomy in the occlusion of the arteries. RESULTS: The causes of difficult intraarterial thrombectomy included multiple thrombus, tortuosity in vascular paths, guiding catheter being placed below the internal carotid artery siphon leading to weak strength of suction and support of stent, embolus dropping in the thrombectomy and inadequate anesthesia. After successful thrombectomy 3 cases had mTICI score of 2a, 4 cases of 2b, 1 case of 3. The NIHSS score was 5 (24) at 7(th) day after treatment. At the 90-day follow-up 5 patients had good prognosis (modified Rankin score 0 to 2) and 3 had disability (modified Rankin score 3 to 4). CONCLUSION: Cases of AIS with difficult intraarterial thrombectomy can be treated by improving thrombectomy materials and technique, reasonable anesthesia and perioperative medication in decision-making strategy.

Doped graphene for metal-free catalysis.

Graphene has attracted increasing attention in different scientific fields including catalysis. Via modification with foreign metal-free elements such as nitrogen, its unique electronic and spin structure can be changed and these doped graphene sheets have been successfully employed in some catalytic reactions recently, showing them to be promising catalysts for a wide range of reactions. In this review, we summarize the recent advancements of these new and interesting catalysts, with an emphasis on the universal origin of their catalytic mechanisms. We are full of hope for future developments, such as more precisely controlled doping methods, atom-scale surface characterization technology, generating more active catalysts via doping, and finding wide applications in many different fields.

The influence of N-doped carbon materials on supported Pd: enhanced hydrogen storage and oxygen reduction performance.

N-doped graphene has become an important support for Pd in both hydrogen storage and catalytic reactions. The molecular orbitals of carbon materials (including graphene, fullerene, and small carbon clusters) and those of the supported Pd species will hybrid much stronger as N dopants are introduced, owing to the increased electrostatic attraction at the interface. This enhances the carbon substrates' catching force for the supported Pd, preventing its leaching and aggregation in many practical applications. The better dispersion and stabilization of Pd nanoparticles, which are induced by various carbon supports with N-doping, are pleasing to us and could increase their efficiency and facilitate their recycling during various reaction processes in several fields.