Analysis of nitrogen-containing rocket fuel transformation products in loamy soil by thermal desorption gas chromatography-tandem mass spectrometry.

Unsymmetrical dimethylhydrazine (UDMH) based rocket fuel, when released into the soil, undergoes oxidative transformations to form a variety of toxic nitrogen-containing products (TPs). Loamy soils containing aluminosilicates (clay) are capable of strong binding and retention of UDMH TPs due to a combination of polar sorption and cation-exchange properties, posing challenges for their extraction and quantification. To overcome this problem, the present study proposes direct thermal desorption (TD) of analytes from loam facilitated by the addition of modifiers competing with UDMH TPs for sorption centers and ensuring their conversion into molecular form. Among tested additives, the mixture of potassium chloride and hydroxide demonstrated the best performance and provided recoveries of the most UDMH TPs exceeding 70% under optimized TD conditions (200°C, 30 min). The online combination of TD with gas chromatography-tandem mass spectrometry allowed for the development of a method for the determination of 15 UDMH TPs in loamy soils with limits of detection in the range of 0.2-15 µg/kg. The use of matrix-matched calibration and deuterated internal standards ensured high accuracy (80%-100%) and precision (relative standard deviation < 18%) of the analysis. The developed method was validated and successfully tested in the analyses of real loamy soil samples polluted with rocket fuel.

Comprehensive identification of polyphenolic metabolites in aspen knotwood by combination of 2D NMR and HPLC-HRMS.

INTRODUCTION: European aspen (Populus tremula L.) knotwood contains large amounts of polyphenolic metabolites, mainly flavonoids, and can be considered as a promising industrial-scale source of valuable bioactive compounds. Valorization of knotwood extractives requires detailed information on their chemical composition and a relevant analytical methodology. OBJECTIVE: This study proposes combined analytical strategy for non-targeted screening and identification of polyphenolic plant metabolites and is aimed at comprehensive characterization of knotwood extractives. MATERIALS AND METHODS: Aspen knotwood acetone extract with determined antioxidant activity was an object of the study. Two-dimensional NMR spectroscopy with Structure Elucidator expert system was used for preliminary search of major components and specific structures. Liquid chromatography-high-resolution mass spectrometry (HPLC-HRMS) with data-dependent MS/MS spectra acquisition was used as a complementary technique providing molecular-level characterization and identification of the detected metabolites. RESULTS: Twenty-eight phenolic metabolites were found and identified. Among them, flavonoids, aromadendrin and naringenin, as well as their glycosylated derivatives (mainly O-glucosides) and methyl ethers, dominated. Taxifolin and its 7-O-glucoside were detected as minor components. Other detected compounds are represented by p-coumaric acid and its rutinoside and small amounts of glycosylated ferulic acid. Nineteen of the detected compounds were discovered in aspen knotwood for the first time. The results were confirmed by preparative isolation of individual compounds and NMR studies. CONCLUSION: The proposed analytical strategy based on 2D NMR and HPLC-HRMS can be considered a powerful tool in the analysis of plant extractives and allowed for the identification and semi-quantification of a large number of polyphenols in aspen knotwood.

Mucolytic Drugs Ambroxol and Bromhexine: Transformation under Aqueous Chlorination Conditions.

Bromhexine and ambroxol are among the mucolytic drugs most widely used to treat acute and chronic respiratory diseases. Entering the municipal wastewater and undergoing transformations during disinfection with active chlorine, these compounds can produce nitrogen- and bromine-containing disinfection by-products (DBPs) that are dangerous for aquatic ecosystems. In the present study, primary and deep degradation products of ambroxol and bromhexine obtained in model aquatic chlorination experiments were studied via the combination of high-performance liquid and gas chromatography with high-resolution mass spectrometry. It was shown that at the initial stages, the reactions of cyclization, hydroxylation, chlorination, electrophilic ipso-substitution of bromine atoms with chlorine, and oxidative N-dealkylation occur. Along with known metabolites, a number of novel primary DBPs were tentatively identified based on their elemental compositions and tandem mass spectra. Deep degradation of bromhexine and ambroxol gives twenty-four identified volatile and semi-volatile compounds of six classes, among which trihalomethanes account for more than 50%. The specific class of bromhexine- and ambroxol-related DBPs are bromine-containing haloanilines. Seven of them, including methoxy derivatives, were first discovered in the present study. One more novel class of DBPs associated with bromhexine and ambroxol is represented by halogenated indazoles formed through dealkylation of the primary transformation products containing pyrazoline or tetrahydropyrimidine cycle in their structure.

Kendrick mass defect analysis - a tool for high-resolution Orbitrap mass spectrometry of native lignin.

Lignin is the second most abundant biopolymer in nature and a promising renewable feedstock for the production of aromatic compounds, composite materials, sorbents, etc. Being a complex mixture of oligomeric molecules with an irregular structure, natural lignin is an extremely difficult object to study. Its molecular level characterization requires advanced analytical techniques among which atmospheric pressure photoionization Orbitrap mass spectrometry holds a promising place. In the present study, Kendrick mass defect (KMD) analysis was proposed to facilitate the visualization and interpretation of Orbitrap mass spectra of the biopolymer on an example of Siberian pine dioxane lignin preparation. The use of the typical guaiacylpropane structure C10H12O4 as a Kendrick base unit made it possible to effectively identify oligomer series with different polymerization degrees and structurally related compounds, as well as to reliably determine the elemental compositions and structures of oligomers with high molecular weights (> 1 kDa). For the first time, KMD analysis was applied to the interpretation of the complex tandem mass spectra of lignin oligomers, rapid discrimination of the product ion series, and the establishment of the main collision-induced dissociation pathways. It was demonstrated that especially promising was the use of KMD filtering in the study of broadband fragmentation tandem mass spectra, which allows for the structural characterization of all oligomers with a particular degree of polymerization.

Application of 2D NMR Spectroscopy in Combination with Chemometric Tools for Classification of Natural Lignins.

Lignin is considered a promising renewable source of valuable chemical compounds and a feedstock for the production of various materials. Its suitability for certain directions of processing is determined by the chemical structure of its macromolecules. Its formation depends on botanical origin, isolation procedure and other factors. Due to the complexity of the chemical composition, revealing the structural differences between lignins of various origins is a challenging task and requires the use of the most informative methods for obtaining and processing data. In the present study, a combination of two-dimensional nuclear magnetic resonance (2D NMR) spectroscopy and multivariate analysis of heteronuclear single quantum coherence (HSQC) spectra is proposed. Principal component analysis and hierarchical cluster analysis techniques demonstrated the possibility to effectively classify lignins at the level of belonging to classes and families of plants, and in some cases individual species, with an error rate for data classification of 2.3%. The reverse transformation of loading plots into the corresponding HSQC loading spectra allowed for structural information to be obtained about the latent components of lignins and their structural fragments (biomarkers) responsible for certain differences. As a result of the analysis of 34 coniferous, deciduous, and herbaceous lignins, 10 groups of key substructures were established. In addition to syringyl, guaiacyl, and p-hydroxyphenyl monomeric units, they include various terminal substructures: dihydroconiferyl alcohol, balanopholin, cinnamic acids, and tricin. It was shown that, in some cases, the substructures formed during the partial destruction of biopolymer macromolecules also have a significant effect on the classification of lignins of various origins.

Determination of Pentacyclic Triterpenoids in Plant Biomass by Porous Graphitic Carbon Liquid Chromatography-Tandem Mass Spectrometry.

Pentacyclic triterpenoids (PCTs), which possess a number of bioactive properties, are considered one of the most important classes of secondary plant metabolites. Their chromatographic determination in plant biomass is complicated by the need to separate a large number of structurally similar compounds belonging to several classes that differ greatly in polarity (monools, diols, and triterpenic acids). This study proposes a rapid, sensitive, and low-cost method for the simultaneous quantification of ten PCTs (3ß-taraxerol, lupeol, ß-amyrin, α-amyrin, betulin, erythrodiol, uvaol, betulinic, oleanolic, and ursolic acids) by high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) using porous graphitic carbon (Hypercarb) as a stationary phase capable of hydrophobic retention and specific interactions with analytes. Revealing the effects of the mobile phase composition, pH, ionic strength, and column temperature on retention and selection of chromatographic conditions on this basis allowed for the effective separation of all target analytes within 8 min in gradient elution mode and attaining limits of detection in the range of 4-104 µg L-1. The developed method was fully validated and successfully tested in the determination of PCTs in common haircap (Polytrichum commune) and prairie sphagnum (Sphagnum palustre) mosses, and fireweed (Chamaenerion angustifolium) stems and leaves.

Analysis of Softwood Lignans by Comprehensive Two-Dimensional Liquid Chromatography.

Lignans constitute a large group of phenolic plant secondary metabolites possessing high bioactivity. Their accurate determination in plant extracts with a complex chemical composition is challenging and requires advanced separation techniques. In the present study, a new approach to the determination of lignans in coniferous knotwood extracts as the promising industrial-scale source of such compounds based on comprehensive two-dimensional liquid chromatography separation and UV spectrophotometric detection is proposed. First and second-dimension column screening showed that the best results can be obtained using a combination of non-polar and polar hydroxy group embedded octadecyl stationary phases with moderate (~40%) "orthogonality". The optimization of LC × LC separation conditions allowed for the development of a new method for the quantification of the five lignans (secoisolariciresinol, matairesinol, pinoresinol, 7-hydroxymatairesinol, and nortrachelogenin) in knotwood extracts with limits of quantification in the range of 0.27-0.95 mg L-1 and a linear concentration range covering at least two orders of magnitude. Testing the developed method on coniferous (larch, fir, spruce, and pine) knotwood extracts demonstrated the high selectivity of the analysis and the advantages of LC × LC in the separation and accurate quantification of the compounds co-eluting in one-dimensional HPLC.

Fractionation of Arctic Brown Algae (Fucus vesiculosus) Biomass Using 1-Butyl-3-methylimidazolium-Based Ionic Liquids.

Arctic brown algae are considered a promising industrial-scale source of bioactive sub-stances as polysaccharides, polyphenols, and low-molecular secondary metabolites. Conventional technologies for their processing are focused mainly on the isolation of polysaccharides and involve the use of hazardous solvents. In the present study a "green" approach to the fractionation of brown algae biomass based on the dissolution in ionic liquids (ILs) with 1-butil-3-methylimidazolium (bmim) cation with further sequential precipitation of polysaccharides and polyphenols with acetone and water, respectively, is proposed. The effects of IL cation nature, temperature, and treatment duration on the dissolution of bladderwrack (Fucus vesiculosus), yields of the fractions, and their chemical composition were studied involving FTIR and NMR spectroscopy, as well as size-exclusion chromatography and monosaccharide analysis. It was shown that the use of bmim acetate ensures almost complete dissolution of plant material after 24 h treatment at 150 °C and separate isolation of the polysaccharide mixture (alginates, cellulose, and fucoidan) and polyphenols (phlorotannins) with the yields of ~40 and ~10%, respectively. The near-quantitative extraction of polyphenolic fraction with the weight-average molecular mass of 10-20 kDa can be achieved even under mild conditions (80-100 °C). Efficient isolation of polysaccharides requires harsh conditions. Higher temperatures contribute to an increase in fucoidan content in the polysaccharide fraction.

Rapid determination of phthalates in paper products by supercritical fluid chromatography/tandem mass spectrometry.

Phthalic acid esters are widely used as components of industrial and consumer products including paper and cardboard packaging materials in contact with food or human skin. Being endocrine-disrupting chemicals, phthalic acid esters have a negative effect on human health and must be controlled in pulp and paper products. In the present study, supercritical fluid chromatography-tandem mass spectrometry in combination with pressurized liquid extraction was proposed for phthalic acid esters determination in such objects. Octadecyl stationary phase with non-endcapped silanol groups ensured rapid (4 min) separation of the 10 priority phthalic acid esters in isocratic elution mode and allowed for effective elimination of interferences from the trace impurities of phthalic acid esters in the mobile phase. The attained limits of quantitation are in the range of 0.7-10 µg/L in extracts and 0.02-0.3 µg/g in paper and cardboard samples. The developed method is distinguished by analysis rapidity, easy sample preparation procedure, high selectivity, low susceptibility to mobile phase contamination with analytes, low cost, and environmental friendliness due to the use of carbon dioxide as a main component of the mobile phase. The method was successfully tested on real samples of toilet paper and food packaging paper and cardboard in which eight analytes were found at the levels of 0.03-43.5 µg/g.

New Insights into the Thermal Stability of 1-Butyl-3-methylimidazolium-Based Ionic Liquids.

One of the most promising applications of ionic liquids (ILs) with 1-butyl-3-methylimidazolium (bmim) cation is based on their unique ability to dissolve and fractionate lignocellulosic biomass, allowing for the development of green biorefining technologies. A complete dissolution of lignocellulose requires prolonged treatment at elevated temperatures, which can cause the partial degradation of ILs. In the present study, a combination of various analytical techniques (GC-MS, HPLC-HRMS, 2D-NMR, synchronous thermal analysis) was used for the comprehensive characterization of bmim acetate, chloride, and methyl sulfate degradation products formed at 150 °C during 6- and 24-h thermal treatment. A number of volatile and non-volatile products, including monomeric and dimeric alkyl substituted imidazoles, alcohols, alkyl amines, methyl and butyl acetates, and N-alkylamides, was identified. By thermal lability, ILs can be arranged in the following sequence, coinciding with the decrease in basicity of the anion: [bmim]OAc > [bmim]Cl > [bmim]MeSO4. The accumulation of thermal degradation products in ILs, in turn, affects their physico-chemical properties and thermal stability, and leads to a decrease in the decomposition temperature, a change in the shape of the thermogravimetric curves, and the formation of carbon residue during pyrolysis.

Rapid Simultaneous Quantification of 1-Formyl-2,2-Dimethylhydrazine and Dimethylurea Isomers in Environmental Samples by Supercritical Fluid Chromatography-Tandem Mass Spectrometry.

When released to the environment, the rocket fuel unsymmetrical dimethylhydrazine (UDMH) undergoes oxidative transformations, resulting in the formation of an extremely large number of nitrogen-containing transformation products, including isomeric compounds which are difficult to discriminate by common chromatography techniques. In the present work, supercritical fluid chromatography-tandem mass spectrometry (SFC-MS/MS) was proposed for resolving the problem of fast separation and simultaneous quantification of 1-formyl-2,2-dimethylhydrazine (FADMH) as one of the major UDMH transformation products, and its isomers-1,1-dimethylurea (UDMU) and 1,2-dimethylurea (SDMU). 2-Ethylpyridine stationary phase provided baseline separation of analytes in 1.5 min without the distortion of the chromatographic peaks. Optimization of SFC separation and MS/MS detection conditions allowed for the development of rapid, sensitive, and "green" method for the simultaneous determination of FADMH, UDMU, and SDMU in environmental samples with LOQs of 1-10 µg L-1 and linear range covering three orders of magnitude. The method was validated and successfully tested on the real extracts of peaty and sandy soils polluted with rocket fuel and UDMH oxidation products. It was shown that both UDMU and SDMU are formed in noticeable amounts during UDMH oxidation. Despite relatively low toxicity, UDMU can be considered one of the major UDMH transformation products and a potential marker of soil pollution with toxic rocket fuel.

Synthesis of 3-Aryl-3-(Furan-2-yl)Propanoic Acid Derivatives, and Study of Their Antimicrobial Activity.

Reactions of 3-(furan-2-yl)propenoic acids and their esters with arenes in Brønsted superacid TfOH affords products of hydroarylation of the carbon-carbon double bond, 3-aryl-3-(furan-2-yl)propenoic acid derivatives. According to NMR and DFT studies, the corresponding O,C-diprotonated forms of the starting furan acids and esters should be reactive electrophilic species in these transformations. Starting compounds and their hydroarylation products, at a concentration of 64 µg/mL, demonstrate good antimicrobial activity against yeast-like fungi Candida albicans. Apart from that, these compounds suppress Escherichia coli and Staphylococcus aureus.

Bioprospecting of Less-Polar Constituents from Endemic Brown Macroalga Fucus virsoides J. Agardh from the Adriatic Sea and Targeted Antioxidant Effects In Vitro and In Vivo (Zebrafish Model).

The endemic brown macroalga Fucus virsoides J. Agardh from the Adriatic Sea was in the focus of the present research. The volatiles of fresh (FrFv) and air-dried (DrFv) samples of F. virsoides obtained by headspace solid-phase microextraction (HS-SPME) and hydrodistillation (HD) were analyzed by gas chromatography equipped with flame ionization detector and mass spectrometry (GC-FID/MS). The major HS-FrFv compound was pentadecane (61.90-71.55%) followed by pentadec-1-ene (11.00-7.98%). In HS-DrFv, pentadec-1-ene was not present, and few lower aliphatic compounds appeared, as well as benzaldehyde and benzyl alcohol. In HD-FrFv, particularly abundant were alkenes (such as pentadec-1-ene (19.32%), or (E)-pentadec-7-ene (8.35%)). In HD-DrFv, more oxidation products were present (e.g., carbonyl compounds such as tridecanal (18.51%)). The fatty acids profile of freeze-dried sample (FdFv) after conversion to methyl esters was determined by GC-FID, and oleic acid was dominant (42.28%), followed by arachidonic acid (15.00%). High-performance liquid chromatography-high-resolution mass spectrometry with electrospray ionization (HPLC-ESI-HRMS) was used for the screening of less polar fractions (F3 and F4) of F. virsoides. Mono- and diglycerides of stearic, palmitic, oleic, and arachidonic acids were found. Terpenoids and steroids comprised the compounds C20H30(32)O2 and C29H48O(2). Among carotenoids, fucoxanthin was identified. Chlorophyll derivatives were also found (C55H74(72)N4O(5-7)), dominated by pheophytin a. The antioxidant activity of the fractions was investigated by in vitro assays (oxygen radical absorbance capacity (ORAC), reduction of radical cation (ABTS•+), 2,2-diphenyl-1-picryl-hydrazyl-hydrate (DPPH) assay, and ferric reducing antioxidant power (FRAP)) and by in vivo zebrafish model (along with fish embryotoxicity). In vitro experiments proved good radical scavenging abilities of F3 and F4 fractions, which were additionally supported by the protective effect against hydrogen peroxide-induced oxidative stress in zebrafish embryos.

Screening and semi-quantitative determination of pentacyclic triterpenoids in plants by liquid chromatography-tandem mass spectrometry in precursor ion scan mode.

INTRODUCTION: Pentacyclic triterpenoids (PCTs) are secondary plant metabolites. They are of exceptional interest as biologically active substances and raw materials for a wide range of medications. Thus, the development of a methodology for rapid screening of PCTs in plant biomass is an important task. OBJECTIVE: The goal of this work was to develop an approach for simultaneous screening and semi-quantitative determination of PCTs in plant tissues by liquid chromatography-tandem mass spectrometry with a precursor ion scan (PrecIS). MATERIALS AND METHODS: Pressurised liquid extraction (PLE) with methanol was used for the isolation of PCTs from plant biomass. Screening and semi-quantitative determination of PCTs in the obtained extracts were carried out by reversed phase high-performance liquid chromatography-tandem mass spectrometry in a PrecIS mode. RESULTS: The product ion at m/z 95 with collision energy of 40 V was used as a diagnostic ion to identify PCTs by the PrecIS mode. In plant materials, 26 PCTs and their derivatives, such as PCTs esters and glycosides, were detected and identified. Calculation of the relative response factor for nine available PCTs showed that using a betulin calibration curve allows us to estimate the semi-quantitative content of PCTs and their derivatives in plant PLE extracts. CONCLUSION: The developed approach can be applied for simultaneous untargeted screening and semi-quantitative determination of PCTs and their derivatives in various plants at sub-parts per million levels.

Gas Chromatography-Mass Spectrometry Quantification of 1,1-Dimethylhydrazine Transformation Products in Aqueous Solutions: Accelerated Water Sample Preparation.

The use of highly toxic rocket fuel based on 1,1-dimethylhydrazine (UDMH) in many types of carrier rockets poses a threat to environment and human health associated with an ingress of UDMH into wastewater and natural reservoirs and its transformation with the formation of numerous toxic nitrogen-containing products. Their GC-MS quantification in aqueous samples requires matrix change and is challenging due to high polarity of analytes. To overcome this problem, accelerated water sample preparation (AWASP) based on the complete removal of water with anhydrous sodium sulfate and transferring analytes into dichloromethane was used. Twenty-nine UDMH transformation products including both the acyclic and heterocyclic compounds of various classes were chosen as target analytes. AWASP ensured attaining near quantitative extraction of 23 compounds with sample preparation procedure duration of no more than 5 min. Combination of AWASP with gas chromatography-mass spectrometry and using pyridine-d5 as an internal standard allowed for developing the rapid, simple, and low-cost method for simultaneous quantification of UDMH transformation products with detection limits of 1-5 µg L-1 and linear concentration range covering 4 orders of magnitude. The method has been validated and successfully tested in the analysis of aqueous solutions of rocket fuel subjected to oxidation with atmospheric oxygen, as well as pyrolytic gasification in supercritical water modelling wastewater from carrier rockets launch sites.

Characterization of Ionic Liquid Lignins Isolated from Spruce Wood with 1-Butyl-3-methylimidazolium Acetate and Methyl Sulfate and Their Binary Mixtures with DMSO.

Ionic liquids (ILs) based on 1-butyl-3-methylimidazolium (bmim) cation have proved to be promising solvents for the fractionation of plant biomass with the production of cellulose and lignin. This study deals with the characterization of lignins isolated from coniferous (spruce) wood using [bmim]OAc and [bmim]MeSO4 ionic liquids and their binary mixtures with DMSO (80:20). Molecular weight distributions, functional composition, and structural features of IL lignins were studied by size-exclusion chromatography, NMR spectroscopy (1D and 2D) and atmospheric pressure photoionization high-resolution mass spectrometry. It was shown that the interaction of ILs with lignin leads to significant chemical changes in the biopolymer; a decrease in the degree of polymerization and in the content of free phenolic hydroxyl groups due to alkylation, the disappearance (in the case of [bmim]OAc) of carbonyl groups and a significant destruction of ß-O-4 bonds. The chemical reactions between lignin and 1-butyl-3-methylidazolium cation with covalent binding of ionic liquids or products of their decomposition is evidenced by the presence of a large number of nitrogen-containing oligomers in IL lignins.

Bio-Based Solvents and Gasoline Components From Renewable 2,3-Butanediol and 1,2-Propanediol: Synthesis and Characterization.

In this study approaches for chemical conversions of the renewable compounds 1,2-propanediol (1,2-PD) and 2,3-butanediol (2,3-BD) that yield the corresponding cyclic ketals and glycol ethers have been investigated experimentally. The characterization of the obtained products as potential green solvents and gasoline components is discussed. Cyclic ketals have been obtained by the direct reaction of the diols with lower aliphatic ketones (1,2-PD + acetone → 2,2,4-trimethyl-1,3-dioxolane (TMD) and 2,3-BD + butanone-2 → 2-ethyl-2,4,5-trimethyl-1,3-dioxolane (ETMD)), for which the ΔH0r, ΔS0r and ΔG0r values have been estimated experimentally. The monoethers of diols could be obtained through either hydrogenolysis of the pure ketals or from the ketone and the diol via reductive alkylation. In the both reactions, the cyclic ketals (TMD and ETMD) have been hydrogenated in nearly quantitative yields to the corresponding isopropoxypropanols (IPP) and 3-sec-butoxy-2-butanol (SBB) under mild conditions (T = 120-140 °C, p(H2) = 40 bar) with high selectivity (>93%). Four products (TMD, ETMD, IPP and SBB) have been characterized as far as their physical properties are concerned (density, melting/boiling points, viscosity, calorific value, evaporation rate, Antoine equation coefficients), as well as their solvent ones (Kamlet-Taft solvatochromic parameters, miscibility, and polymer solubilization). In the investigation of gasoline blending properties, TMD, ETMD, IPP and SBB have shown remarkable antiknock performance with blending antiknock indices of 95.2, 92.7, 99.2 and 99.7 points, respectively.

Ionic liquid matrices for MALDI mass spectrometry of lignin.

The use of matrix-assisted laser desorption/ionization (MALDI) mass spectrometry for the study of lignin is still extremely limited due to its low ionization efficiency. We have developed an approach for obtaining high-intensity MALDI mass spectra of lignin, based on the use of ionic liquids as matrices. Thirty-two ionic liquids consisting of large nitrogen-containing cations and anions of aromatic acids, traditionally used as crystalline matrices, were tested. It was established that ionic liquids based on N,N-diisopropyl-N-ethylammonium, N-isopropyl-N-methyl-N-tert-butylammonium, 3-aminoquinolinium, pyridinium, and 1-methylimidazolium cations and anions of ferulic, α-cyanohydroxycinnamic, and 2,5-dihydroxybenzoic acids as MALDI matrices provided high efficiency of lignin desorption/ionization with generation of singly charged protonated molecules of its oligomers. The use of such matrices in combination with the MALDI quadrupole ion trap-time-of-flight technique allows high-intensity mass spectra of lignin to be obtained without interferences from the matrix in the molecular weight range up to 3 kDa, adequately reflecting the molecular mass characteristics of lignin preparations. Using ionic liquid matrices, MS2 and MS3 MALDI mass spectra of lignins for various precursor ions were first obtained, including in the region of large (> 2 kDa) molecular weights. Differences in tandem mass spectra of coniferous and deciduous lignins, reflecting the structural features of corresponding oligomers were demonstrated. Graphical abstract ᅟ.

Negative ion mode atmospheric pressure ionization methods in lignin mass spectrometry: A comparative study.

RATIONALE: Mass spectrometry with atmospheric pressure ionization is the most promising method for studying the structure of natural lignin, which is the second most abundant biopolymer in nature. The goal of this study is to compare the efficiency and characteristics of different types of ionization techniques (ESI, APCI, and APPI) in the negative ion mode by the example of softwood lignin. METHODS: As the subjects of the study, we selected a preparation of spruce dioxane lignin and several phenols, simulating the basic structural fragments of the lignin macromolecule. High-resolution mass spectra were recorded using an Orbitrap mass spectrometer. Acetone was used as a solvent for samples and a dopant in photoionization mode. The ionization conditions were optimized to achieve the maximum intensity of the mass spectra. RESULTS: The formation of deprotonated lignin molecules is characteristic of all the studied types of ionization; partial fragmentation of the biopolymer occurs in all ionization modes. ESI in the presence of ammonia yields low-intensity signals, leads to a significant decrease in ionization efficiency with increasing molecular weight of lignin oligomers, gives high-intensity impurity peaks in the mass spectra, and demonstrates selectivity for more polar structures. The ionization efficiency increases sharply in the order of ESI < APCI < APPI. The two latter methods are characterized by similar mechanisms of ionization; they ensure detection of approximately 1900 spruce lignin oligomers in the range of molecular weights up to 1.8 kDa. The determination of the elemental composition of oligolignols enabled the four main groups of compounds to be distinguished. CONCLUSIONS: Photoionization using acetone as a dopant is distinguished by a significantly higher intensity of signals and the lowest sensitivity to contaminants present in the lignin preparation. This ionization method can be considered as preferred for studying the dioxane lignin preparations of woody plants. Copyright © 2016 John Wiley & Sons, Ltd.

Resolution-enhanced Kendrick mass defect analysis for improved mass spectrometry characterization of lignin.

Lignin is a promising renewable source of valuable organic compounds and environmentally benign materials. However, its involvement in economic circulation and the creation of new biorefining technologies require an understanding of its chemical composition and structure. This problem can be overcome by applying mass spectrometry analytical techniques in combination with advanced chemometric methods for mass spectra processing. The present study is aimed at the development of mass defect filtering to characterize the chemical composition of lignin at the molecular level. This study introduces a novel approach involving resolution-enhanced Kendrick mass defect (REKMD) analysis for the processing of atmospheric pressure photoionization Orbitrap mass spectra of lignin. The set of priority Kendrick fractional base units was predefined in model experiments and provided a substantially expanding available mass defect range for the informative visualization of lignin mass spectra. The developed REKMD analysis strategy allowed to obtain the most complete data on all the homologous series typical of lignin and thus facilitated the interpretation and assignment of elemental compositions and structural formulas to oligomers detected in extremely complex mass spectra, including tandem ones. For the first time, the minor modifications (sulfation) of lignin obtained in ionic liquid-based biorefining processes were revealed.