Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 9 de 9
Filtrar
Más filtros

Banco de datos
Tipo del documento
País de afiliación
Intervalo de año de publicación
1.
Small ; 16(46): e2003939, 2020 Nov.
Artículo en Inglés | MEDLINE | ID: mdl-33107186

RESUMEN

Rational engineering of the surface properties of perovskite nanocrystals (PeNCs) is critical to obtain light emitters with simultaneous high photoluminescence efficiency and excellent charge transport properties for light-emitting diodes (LEDs). However, the commonly used lead halide sources make it hard to rationally optimize the surface compositions of the PeNCs. In addition, previously developed ligand engineering strategies for conventional inorganic nanocrystals easily deteriorate surface properties of the PeNCs, bringing additional difficulties in optimizing their optoelectronic properties. In this work, a novel strategy of employing a dual-purpose organic lead source for the synthesis of highly luminescent PeNCs with enhanced charge transport property is developed. Lead naphthenate (Pb(NA)2 ), of which the metal ions work as lead sources while the naphthenate can function as the surface ligands afterward, is explored and the obtained products under different synthesis conditions are comprehensively investigated. Monodispersed cesium lead bromide (CsPbBr3 ) with controllable size and excellent optical properties, showing superior photoluminescence quantum yields up to 80%, is obtained. Based on the simultaneously enhanced electrical properties of the Pb(NA)2 -derived PeNCs, the resultant LEDs demonstrate a high peak external quantum efficiency of 8.44% and a superior maximum luminance of 31 759 cd cm-2 .

2.
Inorg Chem ; 57(14): 8375-8381, 2018 Jul 16.
Artículo en Inglés | MEDLINE | ID: mdl-29952566

RESUMEN

Ternary CuZnS nanocrystals (NCs) are synthesized via a facile, scalable, noninjection method at low temperatures for the first time, wherein sodium ascorbate plays the dual roles of reducing agent and capping ligand in the preparation process. These NCs can be dispersed well in a polar solvent like dimethyl sulfoxide, and the average size is ∼4 nm as measured by transmission electron microscopy. The results of X-ray diffraction and X-ray photoelectron spectroscopy indicate that the crystal structure of CuZnS NCs displays covellite CuS-like structure and the Zn element partly occupies the Cu position. Also, the crystal structure of CuZnS NCs is completely converted from a covellite CuS structure into a digenite Cu9S5 structure when the NCs are treated above 350 °C. Moreover, CuZnS NCs demonstrate favorable hole transport properties. When it is employed in MAPbI3-based perovskite solar cells as a hole transport layer, a peak power conversion efficiency of 18.3% is achieved. Simultaneously, the devices based on CuZnS exhibit a remarkably reduced J-V hysteresis. The results indicate that CuZnS is a promising hole transport layer for enhancing perovskite solar cell performance and presents great potential for optoelectronic applications, as well.

3.
Nano Lett ; 15(4): 2756-62, 2015 Apr 08.
Artículo en Inglés | MEDLINE | ID: mdl-25803148

RESUMEN

Organic-inorganic perovskite solar cells have recently emerged at the forefront of photovoltaics research. Here, for the first time, graphdiyne (GD), a novel two dimension carbon material, is doped into PCBM layer of perovskite solar cell with an inverted structure (ITO/PEDOT:PSS/CH3NH3PbI(3-x)Cl(x)/PCBM:GD/C60/Al) to improve the electron transport. The optimized PCE of 14.8% was achieved. Also, an average power conversion efficiency (PCE) of PCBM:GD-based devices was observed with 28.7% enhancement (13.9% vs 10.8%) compared to that of pure PCBM-based ones. According to scanning electron microscopy, conductive atomic force microscopy, space charge limited current, and photoluminescence quenching measurements, the enhanced current density and fill factor of PCBM:GD-based devices were ascribed to the better coverage on the perovskite layer, improved electrical conductivity, strong electron mobility, and efficient charge extraction. Small hysteresis and stable power output under working condition (14.4%) have also been demonstrated for PCBM:GD based devices. The enhanced device performances indicated the improvement of film conductivity and interfacial coverage based on GD doping which brought the high PCE of the devices and the data repeatability. In this work, GD demonstrates its great potential for applications in photovoltaic field owing to its networks with delocalized π-systems and unique conductivity advantage.

4.
Adv Sci (Weinh) ; 11(3): e2305898, 2024 Jan.
Artículo en Inglés | MEDLINE | ID: mdl-37997181

RESUMEN

Terahertz (THz) technologies provide opportunities ranging from calibration targets for satellites and telescopes to communication devices and biomedical imaging systems. A main component will be broadband THz absorbers with switchability. However, optically switchable materials in THz are scarce and their modulation is mostly available at narrow bandwidths. Realizing materials with large and broadband modulation in absorption or transmission forms a critical challenge. This study demonstrates that conducting polymer-cellulose aerogels can provide modulation of broadband THz light with large modulation range from ≈ 13% to 91% absolute transmission, while maintaining specular reflection loss < -30 dB. The exceptional THz modulation is associated with the anomalous optical conductivity peak of conducting polymers, which enhances the absorption in its oxidized state. The study also demonstrates the possibility to reduce the surface hydrophilicity by simple chemical modifications, and shows that broadband absorption of the aerogels at optical frequencies enables de-frosting by solar-induced heating. These low-cost, aqueous solution-processable, sustainable, and bio-friendly aerogels may find use in next-generation intelligent THz devices.

5.
Nat Commun ; 12(1): 4831, 2021 Aug 10.
Artículo en Inglés | MEDLINE | ID: mdl-34376647

RESUMEN

Molecular additives are widely utilized to minimize non-radiative recombination in metal halide perovskite emitters due to their passivation effects from chemical bonds with ionic defects. However, a general and puzzling observation that can hardly be rationalized by passivation alone is that most of the molecular additives enabling high-efficiency perovskite light-emitting diodes (PeLEDs) are chelating (multidentate) molecules, while their respective monodentate counterparts receive limited attention. Here, we reveal the largely ignored yet critical role of the chelate effect on governing crystallization dynamics of perovskite emitters and mitigating trap-mediated non-radiative losses. Specifically, we discover that the chelate effect enhances lead-additive coordination affinity, enabling the formation of thermodynamically stable intermediate phases and inhibiting halide coordination-driven perovskite nucleation. The retarded perovskite nucleation and crystal growth are key to high crystal quality and thus efficient electroluminescence. Our work elucidates the full effects of molecular additives on PeLEDs by uncovering the chelate effect as an important feature within perovskite crystallization. As such, we open new prospects for the rationalized screening of highly effective molecular additives.

6.
ACS Appl Mater Interfaces ; 12(22): 24965-24970, 2020 Jun 03.
Artículo en Inglés | MEDLINE | ID: mdl-32394700

RESUMEN

Quasi-two-dimensional (Q-2D) perovskites featured with multidimensional quantum wells (QWs) have been the main candidates for optoelectronic applications. However, excessive low-dimensional perovskites are unfavorable to the device efficiency due to the phonon-exciton interaction and the inclusion of insulating large organic cations. Herein, the formation of low-dimensional QWs is suppressed by removing the organic cation 1-naphthylmethylamine iodide (NMAI) through ultrahigh vacuum (UHV) annealing. Perovskite light-emitting diode (PLED) devices based on films annealed with optimized UHV conditions show a higher external quantum efficiency (EQE) of 13.0% and wall-plug efficiency of 11.1% compared to otherwise identical devices with films annealed in a glovebox.

7.
Nat Commun ; 11(1): 4736, 2020 Sep 21.
Artículo en Inglés | MEDLINE | ID: mdl-32958808

RESUMEN

Black phase CsPbI3 is attractive for optoelectronic devices, while usually it has a high formation energy and requires an annealing temperature of above 300 °C. The formation energy can be significantly reduced by adding HI in the precursor. However, the resulting films are not suitable for light-emitting applications due to the high trap densities and low photoluminescence quantum efficiencies, and the low temperature formation mechanism is not well understood yet. Here, we demonstrate a general approach for deposition of γ-CsPbI3 films at 100 °C with high photoluminescence quantum efficiencies by adding organic ammonium cations, and the resulting light-emitting diode exhibits an external quantum efficiency of 10.4% with suppressed efficiency roll-off. We reveal that the low-temperature crystallization process is due to the formation of low-dimensional intermediate states, and followed by interionic exchange. This work provides perspectives to tune phase transition pathway at low temperature for CsPbI3 device applications.

8.
Nat Commun ; 10(1): 2818, 2019 Jun 27.
Artículo en Inglés | MEDLINE | ID: mdl-31249295

RESUMEN

Metal halide perovskites are emerging as promising semiconductors for cost-effective and high-performance light-emitting diodes (LEDs). Previous investigations have focused on the optimisation of the emissive perovskite layer, for example, through quantum confinement to enhance the radiative recombination or through defect passivation to decrease non-radiative recombination. However, an in-depth understanding of how the buried charge transport layers affect the perovskite crystallisation, though of critical importance, is currently missing for perovskite LEDs. Here, we reveal synergistic effect of precursor stoichiometry and interfacial reactions for perovskite LEDs, and establish useful guidelines for rational device optimization. We reveal that efficient deprotonation of the undesirable organic cations by a metal oxide interlayer with a high isoelectric point is critical to promote the transition of intermediate phases to highly emissive perovskite films. Combining our findings with effective defect passivation of the active layer, we achieve high-efficiency perovskite LEDs with a maximum external quantum efficiency of 19.6%.

9.
Adv Mater ; 31(41): e1904243, 2019 Oct.
Artículo en Inglés | MEDLINE | ID: mdl-31456250

RESUMEN

Ruddlesden-Popper perovskites (RPPs), consisting of alternating organic spacer layers and inorganic layers, have emerged as a promising alternative to 3D perovskites for both photovoltaic and light-emitting applications. The organic spacer layers provide a wide range of new possibilities to tune the properties and even provide new functionalities for RPPs. However, the preparation of state-of-the-art RPPs requires organic ammonium halides as the starting materials, which need to be ex situ synthesized. A novel approach to prepare high-quality RPP films through in situ formation of organic spacer cations from amines is presented. Compared with control devices fabricated from organic ammonium halides, this new approach results in similar (and even better) device performance for both solar cells and light-emitting diodes. High-quality RPP films are fabricated based on different types of amines, demonstrating the universality of the approach. This approach not only represents a new pathway to fabricate efficient devices based on RPPs, but also provides an effective method to screen new organic spacers with further improved performance.

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA