Molecular Tuning of Reactivity of Zeolite Protons in HZSM-5.

In acidic HZSM-5 zeolite, the reactivity of a methanol molecule interacting with the zeolite proton is amenable to modification via coadsorbing a stochiometric amount of an electron density donor E to form the [(E)(CH3OH)(HZ)] complex. The rate of the methanol in this complex undergoing dehydration to dimethyl ether was determined for a series of E with proton affinity (PA) ranging from 659 kJ mol-1 for C6F6 to 825 kJ mol-1 for C4H8O and was found to follow the expression: Ln(Rate) - Ln(RateN2) = ß(PA - PAN2)γ, where E = N2 is the reference and ß and γ are constants. This trend is probably due to the increased stability of the solvated proton in the [(E)(CH3OH)(HZ)] complex with increasing PA. Importantly, this is also observed in steady-state flow reactions when stoichiometric quantities of E are preadsorbed on the zeolite. As demonstrated with E being D2O, the effect on methanol reactivity diminishes when E is present in excess of the [(E)(CH3OH)(HZ)] complex. It is proposed that the methanol dehydration reaction involves [(E)(CH3OH)(CH3OH)(HZ)] as the transition state, which is supported by the isotopologue distribution of the initial dimethyl ether formed when a flow of CH3OH was passed over ZSM-5 containing one CD3OH per zeolite proton. The implication of this on the mechanism of catalytic methanol dehydration on HZSM-5 is discussed.

Advanced Materials for Energy-Water Systems: The Central Role of Water/Solid Interfaces in Adsorption, Reactivity, and Transport.

The structure, chemistry, and charge of interfaces between materials and aqueous fluids play a central role in determining properties and performance of numerous water systems. Sensors, membranes, sorbents, and heterogeneous catalysts almost uniformly rely on specific interactions between their surfaces and components dissolved or suspended in the water-and often the water molecules themselves-to detect and mitigate contaminants. Deleterious processes in these systems such as fouling, scaling (inorganic deposits), and corrosion are also governed by interfacial phenomena. Despite the importance of these interfaces, much remains to be learned about their multiscale interactions. Developing a deeper understanding of the molecular- and mesoscale phenomena at water/solid interfaces will be essential to driving innovation to address grand challenges in supplying sufficient fit-for-purpose water in the future. In this Review, we examine the current state of knowledge surrounding adsorption, reactivity, and transport in several key classes of water/solid interfaces, drawing on a synergistic combination of theory, simulation, and experiments, and provide an outlook for prioritizing strategic research directions.

Core-Shell Covalently Linked Graphitic Carbon Nitride-Melamine-Resorcinol-Formaldehyde Microsphere Polymers for Efficient Photocatalytic CO2 Reduction to Methanol.

Photocatalytic reduction of CO2 with light and H2O to form CH3OH is a promising route to mitigate carbon emissions and climate changes. Although semiconducting metal oxides are potential photocatalysts for this reaction, low photon efficiency and leaching of environmentally unfriendly toxic metals limit their applicability. Here, we report metal-free, core-shell photocatalysts consisting of graphitic carbon nitride (g-C3N4, CN) covalently linked to melamine-resorcinol-formaldehyde (MRF) microsphere polymers for this reaction. Covalent linkage enabled efficient separation of photo-generated carriers and photocatalysis. Using 100 mg of a photocatalyst containing 15 wt % CN, a CH3OH yield of 0.99 µmol·h-1 was achieved at a reaction temperature of 80 °C and 0.5 MPa with external quantum efficiencies ranging from 5.5% at 380 nm to 1.7% at 550 nm. The yield was about 20 and 10 times higher than that of its components CN and MRF, respectively. Characterization with X-ray photoelectron spectroscopy, transmission electron microscopy, and bulk and surface elemental analyses supported the formation of a core-shell structure and the charge transfer in the C-N bond at the CN-MRF interface between the methoxy group in the 2,4-dihydroxylmethyl-1,3-diphenol part of MRF and the terminal amino groups in CN. This enhanced ligand-to-ligand charge transfer resulted in 67% of the photo-excited internal charge transferred from CN to the hydroxymethylamino group in MRF, whose amino group was the catalytic site for the CO2 photocatalytic reduction to CH3OH. This study provides a series of new metal-free photocatalyst designs and insights into the molecular-level structure-mediated photocatalytic response.

Structural Characterization of Protonated Water Clusters Confined in HZSM-5 Zeolites.

A molecular description of the structure and behavior of water confined in aluminosilicate zeolite pores is a crucial component for understanding zeolite acid chemistry under hydrous conditions. In this study, we use a combination of ultrafast two-dimensional infrared (2D IR) spectroscopy and ab initio molecular dynamics (AIMD) to study H2O confined in the pores of highly hydrated zeolite HZSM-5 (∼13 and ∼6 equivalents of H2O per Al atom). The 2D IR spectrum reveals correlations between the vibrations of both terminal and H-bonded O-H groups and the continuum absorption of the excess proton. These data are used to characterize the hydrogen-bonding network within the cluster by quantifying single-, double-, and non-hydrogen-bond donor water molecules. These results are found to be in good agreement with the statistics calculated from an AIMD simulation of an H+(H2O)8 cluster in HZSM-5. Furthermore, IR spectral assignments to local O-H environments are validated with DFT calculations on clusters drawn from AIMD simulations. The simulations reveal that the excess charge is detached from the zeolite and resides near the more highly coordinated water molecules in the cluster. When they are taken together, these results unambiguously assign the complex IR spectrum of highly hydrated HZSM-5, providing quantitative information on the molecular environments and hydrogen-bonding topology of protonated water clusters under extreme confinement.

Supported Tetrahedral Oxo-Sn Catalyst: Single Site, Two Modes of Catalysis.

Mild calcination in ozone of a (POSS)-Sn-(POSS) complex grafted on silica generated a heterogenized catalyst that mostly retained the tetrahedral coordination of its homogeneous precursor, as evidenced by spectroscopic characterizations using EXAFS, NMR, UV-vis, and DRIFT. The Sn centers are accessible and uniform and can be quantified by stoichiometric pyridine poisoning. This Sn-catalyst is active in hydride transfer reactions as a typical solid Lewis acid. However, the Sn centers can also create Brønsted acidity with alcohol by binding the alcohol strongly as alkoxide and transferring the hydroxyl H to the neighboring Sn-O-Si bond. The resulting acidic silanol is active in epoxide ring opening and acetalization reactions.

One-Pot Synthesis of Pomegranate-Structured Fe3 O4 /Carbon Nanospheres-Doped Graphene Aerogel for High-Rate Lithium Ion Batteries.

A unique hierarchically nanostructured composite of iron oxide/carbon (Fe3O4/C) nanospheres-doped three-dimensional (3D) graphene aerogel has been fabricated by a one-pot hydrothermal strategy. In this novel nanostructured composite aerogel, uniform Fe3O4 nanocrystals (5-10 nm) are individually embedded in carbon nanospheres (ca. 50 nm) forming a pomegranate-like structure. The carbon matrix suppresses the aggregation of Fe3O4 nanocrystals, avoids direct exposure of the encapsulated Fe3O4 to the electrolyte, and buffers the volume expansion. Meanwhile, the interconnected 3D graphene aerogel further serves to reinforce the structure of the Fe3O4/C nanospheres and enhances the electrical conductivity of the overall electrode. Therefore, the carbon matrix and the interconnected graphene network entrap the Fe3O4 nanocrystals such that their electrochemical function is retained even after fracture. This novel hierarchical aerogel structure delivers a long-term stability of 634 mA h g(-1) over 1000 cycles at a high current density of 6 A g(-1) (7 C), and an excellent rate capability of 413 mA h g(-1) at 10 A g(-1) (11 C), thus exhibiting great potential as an anode composite structure for durable high-rate lithium-ion batteries.

Generating and stabilizing Co(I) in a nanocage environment.

A discrete nanocage of core-shell design, in which carboxylic acid groups were tethered to the core and silanol to the shell interior, was found to react with Co2(CO)8 to form and stabilize a Co(I)-CO species. The singular CO stretching band of this new Co species at 1958 cm(-1) and its magnetic susceptibility were consistent with Co(I) compounds. When exposed to O2, it transformed from an EPR inactive to an EPR active species indicative of oxidation of Co(I) to Co(II) with the formation of H2O2. It could be oxidized also by organoazide or water. Its residence in the nanocage interior was confirmed by size selectivity in the oxidation process and the fact that the entrapped Co species could not be accessed by an electrode.

Strong H-bonding from Zeolite BroÌ·nsted Acid Site to Water: Origin of the Broad IR Doublet.

Hydrogen bonding between water molecules and zeolite BroÌ·nsted acid sites (BAS) has received much attention due to the significant influence of water on the adsorption and catalytic properties of these widely used porous materials. When a single water molecule is adsorbed at the BAS, the zeolite O-H stretch vibration decreases in frequency and splits into two extraordinarily broad bands peaked near 2500 and 2900 cm-1 in the infrared (IR) spectrum. This broad doublet feature is the predominant IR signature used to identify and interpret water-BAS H-bonding at low hydration levels, but the origin of the band splitting is not well understood. In this study, we used broadband two-dimensional infrared (2D IR) spectroscopy to investigate zeolite HZSM-5 prepared with a single water molecule per BAS. We find that the 2D IR spectrum is not explained by the most common interpretation of Fermi resonance coupling between the stretch and the bend of the BAS OH group, which predicts intense excited-state transitions that are absent from the experimental results. We present an alternative model of a double-well proton stretch potential, where the band splitting is caused by excited-state tunneling through the proton-transfer barrier. This one-dimensional model reproduces the basic experimental pattern of transition frequencies and amplitudes, suggesting that the doublet bands may originate from a highly anharmonic potential in which the excited state proton wave functions are delocalized over the H-bond between zeolite BAS and adsorbed H2O. Additional details about molecular orientation and coordination of the adsorbed water molecule are also resolved in the 2D IR spectroscopy.

Noncontact catalysis: Initiation of selective ethylbenzene oxidation by Au cluster-facilitated cyclooctene epoxidation.

Traditionally, a catalyst functions by direct interaction with reactants. In a new noncontact catalytic system (NCCS), an intermediate produced by one catalytic reaction serves as an intermediary to enable an independent reaction to proceed. An example is the selective oxidation of ethylbenzene, which could not occur in the presence of either solubilized Au nanoclusters or cyclooctene, but proceeded readily when both were present simultaneously. The Au-initiated selective epoxidation of cyclooctene generated cyclooctenyl peroxy and oxy radicals that served as intermediaries to initiate the ethylbenzene oxidation. This combined system effectively extended the catalytic effect of Au. The reaction mechanism was supported by reaction kinetics and spin trap experiments. NCCS enables parallel reactions to proceed without the constraints of stoichiometric relationships, offering new degrees of freedom in industrial hydrocarbon co-oxidation processes.

Striking confinement effect: AuCl4(-) binding to amines in a nanocage cavity.

Binding of AuCl(4)(-) to amine groups tethered to the interior of a 2 nm siloxane nanocage was determined in solutions containing various concentrations of acid. The mode of binding was inferred from EXAFS and UV-vis spectra to be by ligand exchange of amine for chloride, which implies that the amines remain unprotonated. Cyclic voltammetry confirmed that the Au complexes bind to the nanocage interior and established a 1:1 relationship between bound Au complex and amine groups. The results suggested a 5-7 pH unit shift in the protonation constant of the interior amines relative to free amines in solution.

Erratum: Stable and solubilized active Au atom clusters for selective epoxidation of cis-cyclooctene with molecular oxygen.

This corrects the article DOI: 10.1038/ncomms14881.

Stable and solubilized active Au atom clusters for selective epoxidation of cis-cyclooctene with molecular oxygen.

The ability of Au catalysts to effect the challenging task of utilizing molecular oxygen for the selective epoxidation of cyclooctene is fascinating. Although supported nanometre-size Au particles are poorly active, here we show that solubilized atomic Au clusters, present in ng ml-1 concentrations and stabilized by ligands derived from the oxidized hydrocarbon products, are active. They can be formed from various Au sources. They generate initiators and propagators to trigger the onset of the auto-oxidation reaction with an apparent turnover frequency of 440 s-1, and continue to generate additional initiators throughout the auto-oxidation cycle without direct participation in the cycle. Spectroscopic characterization suggests that 7-8 atom clusters are effective catalytically. Extension of work based on these understandings leads to the demonstration that these Au clusters are also effective in selective oxidation of cyclohexene, and that solubilized Pt clusters are also capable of generating initiators for cyclooctene epoxidation.

In situ transient FTIR and XANES studies of the evolution of surface species in CO oxidation on Au/TiO2.

The adsorption of CO and its reaction with oxygen were investigated using a combination of in situ Fourier transform infrared spectroscopy, step response measurements in a microreactor, (18)O isotopic labeling, and X-ray absorption near edge structure spectroscopy. An as-prepared sample in which Au is present as a surface oxyhydroxy complex does not adsorb CO. On an activated sample in which only metallic Au is detected, 0.18 +/- 0.03 mol CO/(mol Au) are adsorbed on Au at -60 degrees C, which shows an IR band at 2090 cm(-1). When oxygen is present in the gas phase, this species reacts with a turnover rate of 1.4 +/- 0.2 mol CO(mol Au min)(-1), which is close to the steady-state turnover rate. In contrast, there is a very small quantity of adsorbed oxygen on Au. A small IR peak at 1242 cm(-1) appears when an activated sample is exposed to CO. It reacts rapidly with oxygen and is shifted to 1236 cm(-1) if (18)O is used. It is assigned to the possible intermediate hydroxycarbonyl.

Activation of Au/TiO2 catalyst for CO oxidation.

Changes in a Au/TiO(2) catalyst during the activation process from an as-prepared state, consisting of supported AuO(x)(OH)(4-2x)(-) species, were monitored with X-ray absorption spectroscopy and FTIR spectroscopy, complemented with XPS, microcalorimetry, and TEM characterization. When the catalyst was activated with H(2) pulses at 298 K, there was an induction period when little changes were detected. This was followed by a period of increasing rate of reduction of Au(3+) to Au(0), before the reduction rate decreased until the sample was fully reduced. A similar trend in the activation process was observed if CO pulses at 273 K or a steady flow of CO at about 240 K was used to activate the sample. With both activation procedures, the CO oxidation activity of the catalyst at 195 K increased with the degree of reduction up to 70% reduction, and decreased slightly beyond 80% reduction. The results were consistent with metallic Au being necessary for catalytic activity.

Rational synthesis of asymmetric bicyclic siloxane.

A rational and versatile method to synthesize bicyclosiloxane of design structures is presented. The method is used to synthesize a new, asymmetric bicyclo[7.5.3]octasiloxane and other bicyclosiloxanes.

Stepwise synthesis of siloxane chains.

Siloxane chains of designated lengths can be synthesized with high yields by reacting tris(tert-butoxy)silanol alternately with dichlorosilane and silanediol.

Free-standing nitrogen-doped graphene paper as electrodes for high-performance lithium/dissolved polysulfide batteries.

Free-standing N-doped graphene papers (NGP), generated by pyrolysis of polydiallyldimethylammonium chloride, were successfully used as binder-free electrodes for the state-of-the-art Li/polysulfide-catholyte batteries. They exhibited high specific capacities of approximately 1000 mA h g(-1) (based on S) after 100 cycles and coulombic efficiencies great than 98%, significantly better than undoped graphene paper (GP). These NGP were characterized with XRD, X-ray photoelectron spectroscopy, thermogravimetric analysis, AFM, electron microscopy, and Raman and impedance spectroscopy before and after cycling. Spectroscopic evidence suggested stronger binding of sulfide to NGP relative to GP, and modelling results from DFT calculation, substantiated with experimental data, indicated that pyrrolic and pyridinic N atoms interacted more strongly with Li polysulfides than quaternary N atoms. Thus, more favorable partition of polysulfides between the electrode and the electrolyte and the corresponding effect on the morphology of the passivation layer were the causes of the beneficial effect of N doping.

Organosilicon platforms: bridging homogeneous, heterogeneous, and bioinspired catalysis.

Organosilicon compounds, in the form of cubic metallasiloxanes, cage-like silsesquioxanes, macromolecular nanocages, and flexible structures such as dendrimers and linear metallsiloxanes, have found useful applications as catalysts, ligands for metal complexes, and catalyst supports. Illustrative examples of these are presented. The well-defined structures of these compounds make them particularly suitable as molecular analogues of zeolites or silica-supported catalysts. A unique feature of many of these compounds is the presence of flexible siloxane bonds, which accommodate large fluctuations in the framework geometry, reminiscent of the adaptability of enzymes to conformational changes, and distinguish siloxane containing materials from carbon based synthetic materials. New preparative pathways and the use of the versatile silyl ester as a protection group have greatly expanded synthetic possibilities, pointing to the possibility of assembling these structures to form multifunctional catalytic structures. Some nanocage structures, with functionalities organized in close proximity, exhibit nanoconfinement effects.

Tetrahedral Sn-silsesquioxane: synthesis, characterization and catalysis.

A tetrahedral stannasilsesquioxane complex was synthesized as a racemic mixture using Sn(O(i)Pr)4 and silsesquioxanediol, and its structure was confirmed with X-ray crystallography, NMR, and EXAFS. The complex was a Lewis acid, and both anti and syn-binding with Lewis bases were possible with the formation of octahedral Sn complexes. It was also a Lewis acid catalyst active for epoxide ring opening and hydride transfer.