Propensities of Fatty Acid-Modified ASOs: Self-Assembly vs Albumin Binding.

We conducted a biophysical study to investigate the self-assembling and albumin-binding propensities of a series of fatty acid-modified locked nucleic acid (LNA) antisense oligonucleotide (ASO) gapmers specific to the MALAT1 gene. To this end, a series of biophysical techniques were applied using label-free ASOs that were covalently modified with saturated fatty acids (FAs) of varying length, branching, and 5'/3' attachment. Using analytical ultracentrifugation (AUC), we demonstrate that ASOs conjugated with fatty acids longer than C16 exhibit an increasing tendency to form self-assembled vesicular structures. The C16 to C24 conjugates interacted via the fatty acid chains with mouse and human serum albumin (MSA/HSA) to form stable adducts with near-linear correlation between FA-ASO hydrophobicity and binding strength to mouse albumin. This was not observed for the longer fatty acid chain ASO conjugates (>C24) under the experimental conditions applied. The longer FA-ASO however adopted self-assembled structures with increasing intrinsic stabilities proportional to the fatty acid chain length. For instance, FA chain lengths smaller than C24 readily formed self-assembled structures containing 2 (C16), 6 (C22, bis-C12), and 12 (C24) monomers, as measured by analytical ultracentrifugation (AUC). Incubation with albumin disrupted these supramolecular architectures to form FA-ASO/albumin complexes mostly with 2:1 stoichiometry and binding affinities in the low micromolar range, as determined by isothermal titration calorimetry (ITC) and analytical ultracentrifugation (AUC). Binding of FA-ASOs underwent a biphasic pattern for medium-length FA chain lengths (>C16) with an initial endothermic phase of particulate disruption, followed by an exothermic binding event to the albumin. Conversely, ASO modified with di-palmitic acid (C32) formed a strong, hexameric complex. This structure was not disrupted when incubated with albumin under conditions above the critical nanoparticle concentration (CNC; <0.4 µM). It is noteworthy that the interaction of parent, fatty acid-free malat1 ASO to albumin was below detectability by ITC (KD ≫150 µM). This work demonstrates that the nature of mono- vs multimeric structures of hydrophobically modified ASOs is governed by the hydrophobic effect. Consequently, supramolecular assembly to form particulate structures is a direct consequence of the fatty acid chain length. This provides opportunities to exploit the concept of hydrophobic modification to influence pharmacokinetics (PK) and biodistribution for ASOs in two ways: (1) binding of the FA-ASO to albumin as a carrier vehicle and (2) self-assembly resulting in albumin-inert, supramolecular architectures. Both concepts create opportunities to influence biodistribution, receptor interaction, uptake mechanism, and pharmacokinetics/pharmacodynamics (PK/PD) properties in vivo, potentially enabling access to extrahepatic tissues in sufficient concentration to treat disease.

Investigations into mRNA Lipid Nanoparticles Shelf-Life Stability under Nonfrozen Conditions.

mRNA LNPs can experience a decline in activity over short periods (ranging from weeks to months). As a result, they require frozen storage and transportation conditions to maintain their full functionality when utilized. Currently approved commercially available mRNA LNP vaccines also necessitate frozen storage and supply chain management. Overcoming this significant inconvenience in the future is crucial to reducing unnecessary costs and challenges associated with storage and transport. In this study, our objective was to illuminate the potential time frame for nonfrozen storage and transportation conditions of mRNA LNPs without compromising their activity. To achieve this goal, we conducted a stability assessment and an in vitro cell culture delivery study involving five mRNA LNPs. These LNPs were constructed by using a standard formulation similar to that employed in the three commercially available LNP formulations. Among these formulations, we selected five structurally diverse ionizable lipids─C12-200, CKK-E12, MC3, SM-102, and lipid 23─from the existing literature. We incorporated these lipids into a standard LNP formulation, keeping all other components identical. The LNPs, carrying mRNA payloads, were synthesized by using microfluidic mixing technology. We evaluated the shelf life stability of these LNPs over a span of 9 weeks at temperatures of 2-8, 25, and 40 °C, utilizing an array of analytical techniques. Our findings indicated minimal impact on the hydrodynamic diameter, zeta potential, encapsulation efficiency, and polydispersity of all LNPs across the various temperatures over the studied period. The RiboGreen assay analysis of LNPs showed consistent mRNA contents over several weeks at various nonfrozen storage temperatures, leading to the incorrect assumption of intact and functional LNPs. This misunderstanding was rectified by the significant differences observed in EGFP protein expression in an in vitro cell culture (using HEK293 cells) across the five LNPs. Specifically, only LNP 1 (C12-200) and LNP 4 (SM-102) exhibited high levels of EGFP expression at the start (T0), with over 90% of HEK293 cells transfected and mean fluorescence intensity (MFI) levels exceeding 1. Interestingly, LNP 1 (C12-200) maintained largely unchanged levels of in vitro activity over 11 weeks when stored at both 2-8 and 25 °C. In contrast, LNP 4 (SM-102) retained its functionality when stored at 2-8 °C over 11 weeks but experienced a gradual decline of in vitro activity when stored at room temperature over the same period. Importantly, we observed distinct LNP architectures for the five formulations through cryo-EM imaging. This highlights the necessity for a deeper comprehension of structure-activity relationships within these complex nanoparticle structures. Enhancing our understanding in this regard is vital for overcoming storage and stability limitations, ultimately facilitating the broader application of this technology beyond vaccines.

Prodrug-Activating Chain Exchange (PACE) converts targeted prodrug derivatives to functional bi- or multispecific antibodies.

Driven by the potential to broaden the target space of conventional monospecific antibodies, the field of multi-specific antibody derivatives is growing rapidly. The production and screening of these artificial proteins entails a high combinatorial complexity. Antibody-domain exchange was previously shown to be a versatile strategy to produce bispecific antibodies in a robust and efficient manner. Here, we show that the domain exchange reaction to generate hybrid antibodies also functions under physiological conditions. Accordingly, we modified the exchange partners for use in therapeutic applications, in which two inactive prodrugs convert into a product with additional functionalities. We exemplarily show the feasibility for generating active T cell bispecific antibodies from two inactive prodrugs, which per se do not activate T cells alone. The two complementary prodrugs harbor antigen-targeting Fabs and non-functional anti-CD3 Fvs fused to IgG-CH3 domains engineered to drive chain-exchange reactions between them. Importantly, Prodrug-Activating Chain Exchange (PACE) could be an attractive option to conditionally activate therapeutics at the target site. Several examples are provided that demonstrate the efficacy of PACE as a new principle of cancer immunotherapy in vitro and in a human xenograft model.

cryoWriter: a blotting free cryo-EM preparation system with a climate jet and cover-slip injector.

Electron microscopy (EM) introduced a fast and lasting change to structural and cellular biology. However, the sample preparation is still the bottleneck in the cryogenic electron microscopy (cryo-EM) workflow. Classical specimen preparation methods employ a harsh paper-blotting step, and the protein particles are exposed to a damaging air-water interface. Therefore, improved preparation strategies are urgently needed. Here, we present an amended microfluidic sample preparation method, which entirely avoids paper blotting and allows the passivation of the air-water interface during the preparation process. First, a climate jet excludes oxygen from the sample environment and controls the preparation temperature by varying the relative humidity of the grid environment. Second, the integrated "coverslip injector" allows the modulation of the air-water interface of the thin sample layer with effector molecules. We will briefly discuss the climate jet's effect on the stability and dynamics of the sample thin films. Furthermore, we will address the coverslip injector and demonstrate significant improvement in the sample quality.

Highly flexible, IgG-shaped, trivalent antibodies effectively target tumor cells and induce T cell-mediated killing.

A novel bispecific antibody format was applied to generate T cell-engaging antibodies. The TriFab format is a trivalent IgG-shaped entity composed of two Fab arms that bind to antigens on the surface of tumor cells, which are linked via flexible peptides to a CD3 binding moiety that replaces the CH2 domains of conventional IgGs. The distinctive feature of these T cell recruiting bispecifics is that their CD3 variable regions are incorporated between domains, rather than N- or C-terminally fused to an Fc or antibody fragments. T cell recruiting TriFabs resemble in size and shape, are expressed and show biophysical properties similar to regular IgGs. Transmission electron microscopy (TEM) demonstrates high flexibility of the cell surface binding arms as well as target antigen accessibility of the interspersed CD3 binding domain. Functional co-culturing assays of peripheral blood mononuclear cells (PBMCs) and different tumor cell lines (MCF7 and A431) revealed a dose-dependent T cell-mediated cytotoxicity that was induced by the TriFabs targeting either LeY or EGFR cell surface antigens.

Generation, Characterization, and Quantitative Bioanalysis of Drug/Anti-drug Antibody Immune Complexes to Facilitate Dedicated In Vivo Studies.

PURPOSE: Immunogenicity against biotherapeutics can lead to the formation of drug/anti-drug-antibody (ADA) immune complexes (ICs) with potential impact on safety and drug pharmacokinetics (PK). This work aimed to generate defined drug/ADA ICs, characterized by quantitative (bio) analytical methods for dedicated determination of IC sizes and IC profile changes in serum to facilitate future in vivo studies. METHODS: Defined ICs were generated and extensively characterized with chromatographic, biophysical and imaging methods. Quantification of drug fully complexed with ADAs (drug in ICs) was performed with an acid dissociation ELISA. Sequential coupling of SEC and ELISA enabled the reconstruction of IC patterns and thus analysis of IC species in serum. RESULTS: Characterization of generated ICs identified cyclic dimers, tetramers, hexamers, and larger ICs of drug and ADA as main IC species. The developed acid dissociation ELISA enabled a total quantification of drug fully complexed with ADAs. Multiplexing of SEC and ELISA allowed unbiased reconstruction of IC oligomeric states in serum. CONCLUSIONS: The developed in vitro IC model system has been properly characterized by biophysical and bioanalytical methods. The specificity of the developed methods enable discrimination between different oligomeric states of ICs and can be bench marking for future in vivo studies with ICs.

Cholesteryl ester transfer between lipoproteins does not require a ternary tunnel complex with CETP.

The cholesteryl ester transfer protein (CETP) enables the transfer of cholesteryl ester (CE) from high-density lipoproteins (HDL) to low-density lipoproteins (LDL) in the plasma compartment. CETP inhibition raises plasma levels of HDL cholesterol; a ternary tunnel complex with CETP bridging HDL and LDL was suggested as a mechanism. Here, we test whether the inhibition of CETP tunnel complex formation is a promising approach to suppress CE transfer from HDL to LDL, for potential treatment of cardio-vascular disease (CVD). Three monoclonal antibodies against different epitopes of CETP are assayed for their potential to interfere with CE transfer between HDL and/or LDL. Surprisingly, antibodies that target the tips of the elongated CETP molecule, interaction sites sterically required to form the suggested transfer complexes, do not interfere with CETP activity, but an antibody binding to the central region does. We show that CETP interacts with HDL, but not with LDL. Our findings demonstrate that a ternary tunnel complex is not the mechanistic prerequisite to transfer CE among lipoproteins.

Rapid assessment of homogeneity and stability of amorphous solid dispersions by atomic force microscopy--from bench to batch.

PURPOSE: To verify the robustness and fundamental value of Atomic Force Microscopy (AFM) and AFM-based assays to rapidly examine the molecular homogeneity and physical stability of amorphous solid dispersions on Hot-Melt-Extrudates. METHODS: Amorphous solid dispersions were prepared with a Hot-Melt Extruder (HME) and profiled by Raman Microscopy and AFM following a sequential analytical routine (Multi-Scale-Imaging-of-Miscibiliy (MIMix)). Extrudates were analyzed before and after incubation at elevated temperature and humidity. The data were compared with published results as collected on miniaturized melt models. The value of molecular phase separation rates for long term stability prediction was assessed. RESULTS: Data recorded on the extrudates are consistent with those published, and they can be compared side by side. Such direct data comparisons allow the identification of possible sources of extrudate heterogeneities. The surface roughness analysis of fracture-exposed interfaces is a novel quantitative way to trace on the nanometer scale the efficiencies of differently conducted HME-processes. Molecular phase separation rates are shown to be relevant for long term stability predictions. CONCLUSIONS: The AFM-based assessment of API:excipient combinations is a robust method to rapidly identify miscible and stable solid dispersions in a routine manner. It provides a novel analytical tool for the optimization of HME processes.

Impact of non-ionizable lipids and phase mixing methods on structural properties of lipid nanoparticle formulations.

Lipid nanoparticles (LNPs) have been widely investigated for nucleic acid therapeutic delivery, and demonstrated their potential in enabling new mRNA vaccines. LNPs are usually formulated with multi-lipid components and the composition variables may impact their structural properties. Here, we investigated the impact of helper lipids on physicochemical properties of LNPs using a Design of Experiments (DoE) definitive screening design. Phospholipid head group, degree of unsaturation, ratio to cholesterol as well as PEG-lipid content were varied and a series of 14 LNPs were prepared by microfluidic- and solvent-injection mixing. Solvent-injection mixing by a robotic liquid handler yielded 50-225 nm nanoparticles with highly ordered, ∼5 nm inter-lamellar spacing as measured by small angle X-ray scattering (SAXS) and confirmed by cryo-transmission electron microscopy (cryo-EM). In contrast, microfluidic mixing resulted in less ordered, notably smaller (50-75 nm) and more homogenous nanoparticles. Significant impacts of the stealth-lipid DSPE-PEG2000 on nanoparticle size, polydispersity and encapsulation efficiency of an oligonucleotide cargo were observed in LNPs produced by both methods, while varying the phospholipid type and content had only marginal effect on these physicochemical properties. These findings suggest that from a physicochemical perspective, the design space for combinations of helper lipids in LNPs may be considerably larger than anticipated based on the conservative formulation composition of the currently FDA-approved LNPs, thereby opening opportunities for screening and optimization of novel LNP formulations.

Structure and function of purified monoclonal antibody dimers induced by different stress conditions.

PURPOSE: To investigate structure and function of different monoclonal antibody (MAb) dimers. METHODS: MAb dimers were induced by process-related, low pH and UV light stress. Dimers were isolated and purified by chromatography and extensively characterized by biochemical, structural and functional methods. RESULTS: Highly purified dimer forms were obtained which enabled detailed characterization. Dimers induced by process stress were associated by a single non-covalent interaction site between two Fab domains in a characteristic "bone-like" structure observed in Transmission Electron Microscopy (TEM). These dimers showed reduced potency and antigen binding affinity. Low pH stress generated more stable but also non-covalently associated dimers without chemical alterations in a typical "closed" conformation according to TEM. These dimer species were more compact and more hydrophobic as dimers induced by process stress. They showed bioactivity and antigen binding affinity similar to the native monomer. Light-induced dimers, exhibiting various different conformations, were the most stable dimers with various chemical modifications leading to a broad range in size, charge and hydrophobicity. These dimers fully lost bioactivity and antigen binding affinity. CONCLUSION: The use of highly purified MAb dimers and a panel of characterizations methods enabled to obtain a clear picture about molecular architecture and function of dimers.

Atomic force microscopy-based screening of drug-excipient miscibility and stability of solid dispersions.

PURPOSE: Development of a method to assess the drug/polymer miscibility and stability of solid dispersions using a melt-based mixing method. METHODS: Amorphous fractured films are prepared and characterized with Raman Microscopy in combination with Atomic Force Microscopy to discriminate between homogenously and heterogeneously mixed drug/polymer combinations. The homogenous combinations are analyzed further for physical stability under stress conditions, such as increased humidity or temperature. RESULTS: Combinations that have the potential to form a molecular disperse mixture are identified. Their potential to phase separate is determined through imaging at molecular length scales, which results in short observation time. De-mixing is quantified by phase separation analysis, and the drug/polymer combinations are ranked to identify the most stable combinations. CONCLUSIONS: The presented results demonstrate that drug/polymer miscibility and stability of solid dispersions, with many mechanistic details, can be analyzed with Atomic Force Microscopy. The assay allows to identify well-miscible and stable combinations within hours or a few days.

Evaluation of bovine milk extracellular vesicles for the delivery of locked nucleic acid antisense oligonucleotides.

The natural capacity of extracellular vesicles (EVs) to transport their payload to recipient cells has raised big interest to repurpose EVs as delivery vehicles for xenobiotics. In the present study, bovine milk-derived EVs (BMEVs) were investigated for their potential to shuttle locked nucleic acid-modified antisense oligonucleotides (LNA ASOs) into the systemic circulation after oral administration. To this end, a broad array of analytical methods including proteomics and lipidomics were used to thoroughly characterize BMEVs. We found that additional purification by density gradients efficiently reduced levels of non-EV associated proteins. The potential of BMEVs to functionally transfer LNA ASOs was tested using advanced in vitro systems (i.e. hPSC-derived neurons and primary human cells). A slight increase in cellular LNA ASO internalization and target gene reduction was observed when LNA ASOs were delivered using BMEVs. When dosed orally in mice, only a small fraction (about 1% of total administered dose) of LNA ASOs was recovered in the peripheral tissues liver and kidney, however, no significant reduction in target gene expression (i.e. functional knockdown) was observed.

Nanoindentation of Molecular Crystals: Lessons Learned from Aspirin.

Nanoindentation enables the measurement of mechanical properties from single crystals with dimensions of a few micrometers. This experimental technique, however, has only recently been applied to molecular crystals. Key differences between the application of this technique to molecular crystals and metals and other inorganics are identified. From this, protocols for the measurement of hardness and elastic modulus of molecular crystals of pharmaceutical interest are proposed. Using form I aspirin as a model system, the impact of single crystal sample surface preparation (washing and cleaving) on the surface roughness is explored. We show the importance of using a calibration sample with hardness and stiffness close to that of molecular crystals for the acquisition of more accurate data. The issue of solvent occlusions formed during crystal growth is discussed as a source of material property variation as well as tip contamination. It is proposed that this in part explains the significantly larger variation of the measured mechanical properties among different single crystals compared to those performed on a unique sample. Because both the indentation modulus and the hardness can vary significantly for low depth indents, samples were tested over a wide range of depths, which revealed that a minimum depth of penetration is required for the acquisition of data. This experiment is crucial and needs to be carried out for every system under study since it allows for the determination of the minimum-working load. Post-indentation imaging combined with crystallographic analysis and molecular simulations allows for the characterization and rationalization of the material plastic deformation mechanisms.

The Contorsbody, an antibody format for agonism: Design, structure, and function.

The careful design of the antibody architecture is becoming more and more important, especially when the purpose is agonism. We present the design of a novel antibody format that is able to promote receptor dimerization and induce signal transduction resulting in cell proliferation. Mono-specific bivalent Y-shape IgGs made of two light chains and two heavy chains are engineered into single chain dimers of two modified heavy chains, resulting in the fixation of the two Fab fragments along the Fc dimerizing moiety. By this, an antagonist of the Her-receptor family, Trastuzumab, is re-formatted into an agonist by simply incorporating the original binding motif into a different geometrically and sterically constrained conformation. This novel format, named Contorsbody, retains antigen binding properties of the parental IgGs and can be produced by standard technologies established for recombinant IgGs. Structural analyses using molecular dynamics and electron microscopy are described to guide the initial design and to confirm the Contorsbody as a very compact molecule, respectively. Contorsbodies show increased rigidity compared to IgGs and their Fab moieties are positioned parallel and adjacent to each other. This geometry has an increased potential to trigger cell surface antigen or receptor 'cis'-dimerization without 'trans'-bridging of cells or mere receptor blockade.

Protease-activation using anti-idiotypic masks enables tumor specificity of a folate receptor 1-T cell bispecific antibody.

T-cell bispecific antibodies (TCBs) crosslink tumor and T-cells to induce tumor cell killing. While TCBs are very potent, on-target off-tumor toxicity remains a challenge when selecting targets. Here, we describe a protease-activated anti-folate receptor 1 TCB (Prot-FOLR1-TCB) equipped with an anti-idiotypic anti-CD3 mask connected to the anti-CD3 Fab through a tumor protease-cleavable linker. The potency of this Prot- FOLR1-TCB is recovered following protease-cleavage of the linker releasing the anti-idiotypic anti-CD3 scFv. In vivo, the Prot-FOLR1-TCB mediates antitumor efficacy comparable to the parental FOLR1-TCB whereas a noncleavable control Prot-FOLR1-TCB is inactive. In contrast, killing of bronchial epithelial and renal cortical cells with low FOLR1 expression is prevented compared to the parental FOLR1-TCB. The findings are confirmed for mesothelin as alternative tumor antigen. Thus, masking the anti-CD3 Fab fragment with an anti-idiotypic mask and cleavage of the mask by tumor-specific proteases can be applied to enhance specificity and safety of TCBs.

Biochemical and biophysical characterization of purified native CD20 alone and in complex with rituximab and obinutuzumab.

CD20 is a B-lymphocyte specific integral membrane protein, an activated-glycosylated phosphoprotein expressed on the surface of B-cells and a clinically validated target of monoclonal antibodies such as rituximab, ocrelizumab, ofatumumab and obinutuzumab in the treatment of all B cell lymphomas and leukemias as well as autoimmune diseases. Here, we report the extraction and purification of native CD20 from SUDHL4 and RAMOS cell lines. To improve the protein yield, we applied a calixarene-based detergent approach to solubilize, stabilize and purify native CD20 from HEK293 cells. Size Exclusion Chromatography (SEC) and Analytical Ultracentrifugation show that purified CD20 was non-aggregated and that CD20 oligomerization is concentration dependent. Negative stain electron microscopy and atomic force microscopy revealed homogenous populations of CD20. However, no defined structure could be observed. Interestingly, micellar solubilized and purified CD20 particles adopt uniformly confined nanodroplets which do not fuse and aggregate. Finally, purified CD20 could bind to rituximab and obinutuzumab as demonstrated by SEC, and Surface Plasmon Resonance (SPR). Specificity of binding was confirmed using CD20 antibody mutants to human B-cell lymphoma cells. The strategy described in this work will help investigate CD20 binding with newly developed antibodies and eventually help to optimize them. This approach may also be applicable to other challenging membrane proteins.

Two new polymorphic structures of human full-length alpha-synuclein fibrils solved by cryo-electron microscopy.

Intracellular inclusions rich in alpha-synuclein are a hallmark of several neuropathological diseases including Parkinson's disease (PD). Previously, we reported the structure of alpha-synuclein fibrils (residues 1-121), composed of two protofibrils that are connected via a densely-packed interface formed by residues 50-57 (Guerrero-Ferreira, eLife 218;7:e36402). We here report two new polymorphic atomic structures of alpha-synuclein fibrils termed polymorphs 2a and 2b, at 3.0 Å and 3.4 Å resolution, respectively. These polymorphs show a radically different structure compared to previously reported polymorphs. The new structures have a 10 nm fibril diameter and are composed of two protofilaments which interact via intermolecular salt-bridges between amino acids K45, E57 (polymorph 2a) or E46 (polymorph 2b). The non-amyloid component (NAC) region of alpha-synuclein is fully buried by previously non-described interactions with the N-terminus. A hydrophobic cleft, the location of familial PD mutation sites, and the nature of the protofilament interface now invite to formulate hypotheses about fibril formation, growth and stability.

DuoMab: a novel CrossMab-based IgG-derived antibody format for enhanced antibody-dependent cell-mediated cytotoxicity.

High specificity accompanied with the ability to recruit immune cells has made recombinant therapeutic antibodies an integral part of drug development. Here we present a generic approach to generate two novel IgG-derived antibody formats that are based on a modification of the CrossMab technology. MoAbs harbor two heavy chains (HCs) resulting in one binding entity and one fragment crystallizable region (Fc), whereas DuoMabs are composed of four HCs harboring two binding entities and two Fc regions linked at a disulfide-bridged hinge. The latter bivalent format is characterized by avidity-enhanced target cell binding while simultaneously increasing the 'Fc-load' on the surface. DuoMabs were shown to be producible in high yield and purity and bind to surface cells with affinities comparable to IgGs. The increased Fc load directed at the surface of target cells by DuoMabs modulates their antibody-dependent cell-mediated cytotoxicity competency toward target cells, making them attractive for applications that require or are modulated by FcR interactions.

Tumor-targeted 4-1BB agonists for combination with T cell bispecific antibodies as off-the-shelf therapy.

Endogenous costimulatory molecules on T cells such as 4-1BB (CD137) can be leveraged for cancer immunotherapy. Systemic administration of agonistic anti-4-1BB antibodies, although effective preclinically, has not advanced to phase 3 trials because they have been hampered by both dependency on Fcγ receptor-mediated hyperclustering and hepatotoxicity. To overcome these issues, we engineered proteins simultaneously targeting 4-1BB and a tumor stroma or tumor antigen: FAP-4-1BBL (RG7826) and CD19-4-1BBL. In the presence of a T cell receptor signal, they provide potent T cell costimulation strictly dependent on tumor antigen-mediated hyperclustering without systemic activation by FcγR binding. We could show targeting of FAP-4-1BBL to FAP-expressing tumor stroma and lymph nodes in a colorectal cancer-bearing rhesus monkey. Combination of FAP-4-1BBL with tumor antigen-targeted T cell bispecific (TCB) molecules in human tumor samples led to increased IFN-γ and granzyme B secretion. Further, combination of FAP- or CD19-4-1BBL with CEA-TCB (RG7802) or CD20-TCB (RG6026), respectively, resulted in tumor remission in mouse models, accompanied by intratumoral accumulation of activated effector CD8+ T cells. FAP- and CD19-4-1BBL thus represent an off-the-shelf combination immunotherapy without requiring genetic modification of effector cells for the treatment of solid and hematological malignancies.

Lewy pathology in Parkinson's disease consists of crowded organelles and lipid membranes.

Parkinson's disease, the most common age-related movement disorder, is a progressive neurodegenerative disease with unclear etiology. Key neuropathological hallmarks are Lewy bodies and Lewy neurites: neuronal inclusions immunopositive for the protein α-synuclein. In-depth ultrastructural analysis of Lewy pathology is crucial to understanding pathogenesis of this disease. Using correlative light and electron microscopy and tomography on postmortem human brain tissue from Parkinson's disease brain donors, we identified α-synuclein immunopositive Lewy pathology and show a crowded environment of membranes therein, including vesicular structures and dysmorphic organelles. Filaments interspersed between the membranes and organelles were identifiable in many but not all α-synuclein inclusions. Crowding of organellar components was confirmed by stimulated emission depletion (STED)-based super-resolution microscopy, and high lipid content within α-synuclein immunopositive inclusions was corroborated by confocal imaging, Fourier-transform coherent anti-Stokes Raman scattering infrared imaging and lipidomics. Applying such correlative high-resolution imaging and biophysical approaches, we discovered an aggregated protein-lipid compartmentalization not previously described in the Parkinsons' disease brain.