Lithiophilic Hydrogen-Substituted Graphdiyne Aerogels with Ionically Conductive Channels for High-Performance Lithium Metal Batteries.

Lithium (Li) metal stands as a promising anode in advancing high-energy-density batteries. However, intrinsic issues associated with metallic Li, especially the dendritic growth, have hindered its practical application. Herein, we focus on molecular combined structural design to develop dendrite-free anodes. Specifically, using hydrogen-substituted graphdiyne (HGDY) aerogel hosts, we successfully fabricated a promising Li composite anode (Li@HGDY). The HGDY aerogel's lithiophilic nature and hierarchical pores drive molten Li infusion and reduce local current density within the three-dimensional HGDY host. The unique molecular structure of HGDY provides favorable bulk pathways for lithium-ion transport. By simultaneous regulation of electron and ion transport within the HGDY host, uniform lithium stripping/platting is fulfilled. Li@HGDY symmetric cells exhibit a low overpotential and stable cycling. The Li@HGDY||lithium iron phosphate full cell retained 98.1% capacity after 170 cycles at 0.4 C. This study sheds new light on designing high-capacity and long-lasting lithium metal anodes.

Effective Interfacing of Surface Homojunctions on Chemically Identical g-C3N4 for Efficient Visible-Light Photocatalysis without Sacrificial Agents.

Developing efficient homojunctions on g-C3N4 promises metal-free photocatalysis to realize truly sustainable artificial photosynthesis. However, current designs are limited by hindered charge separation due to inevitable grain boundaries and random formation of ineffective homojunctions embedded within the photocatalyst. Here, efficient photocatalysis is driven by introducing effective surface homojunctions on chemically and structurally identical g-C3N4 through leveraging its size-dependent electronic properties. Using a top-down approach, the surface layer of bulk g-C3N4 is partially exfoliated to create sheet-like g-C3N4 nanostructures on the bulk material. This hierarchical design establishes a subtle band energy offset between the macroscopic and nanoscopic g-C3N4, generating homojunctions while maintaining the chemical and structural integrities of the original g-C3N4. The optimized g-C3N4 homojunction demonstrates superior photocatalytic degradation of antibiotic pollutants at >96% efficiency in 2 h, even in different real water samples. It achieves reaction kinetics (≈0.041 min-1) up to fourfold better than standalone materials and their physical mixture. Mechanistic studies highlight the importance of the unique design in boosting photocatalysis by effectively promoting interfacial photocarrier manipulation and utilization directly at the point-of-catalysis, without needing co-catalysts or sacrificial agents. This work presents enormous opportunities for developing advanced and green photocatalytic platforms for sustainable light-driven environmental, energy, and chemical applications.

Magnetic Hydrogel Microbots for Efficient Pollutant Decontamination and Self-Catalyzed Regeneration in Continuous Flow Systems.

The efficient removal of organic pollutants from water is crucial for protecting human health and the ecosystem. While adsorbent-based approaches offer advantages over traditional chemical and thermal methods, they still suffer from slow adsorption kinetics, high energy demand, and limited material lifespan. Herein, an efficient decontamination platform is introduced, using magnetic hydrogel microbots (MHMs) made from picolitre-sized hydrogel droplets coated with multifunctional magnetic nanoparticles. This approach includes 1) dividing a droplet into smaller microbots to enhance their interaction with sample solution and 2) dynamically spinning these MHMs to generate hydrodynamic flows that actively draw pollutants toward the embedded hydrogel for capture. The MHMs show high decontamination effectiveness in both bulk and continuous flow setups, achieving ≈95% removal efficiency within 3 min. Further integrating MHMs with a non-pressurized fluidic platform enables energy-efficient continuous flow decontamination, removing ≥95% total organic carbon from a complex pollutant mixture at a flow rate surpassing other recent designs. Additionally, the MHMs facilitate self-catalyzed regeneration using an environmentally friendly H2O2 precursor, allowing for long-term and repeated usage. By enabling the unique divide-and-arrest decontamination of toxic pollutants, the multifunctional design holds tremendous promise for on-site wastewater treatment to ensure safe water access for everyone, even in resource-limited environments.

Catalyst-On-Hotspot Nanoarchitecture: Plasmonic Focusing of Light onto Co-Photocatalyst for Efficient Light-To-Chemical Transformation.

Plasmon-mediated catalysis utilizing hybrid photocatalytic ensembles promises effective light-to-chemical transformation, but current approaches suffer from weak electromagnetic field enhancements from polycrystalline and isotropic plasmonic nanoparticles as well as poor utilization of precious co-catalyst. Here, efficient plasmon-mediated catalysis is achieved by introducing a unique catalyst-on-hotspot nanoarchitecture obtained through the strategic positioning of co-photocatalyst onto plasmonic hotspots to concentrate light energy directly at the point-of-reaction. Using environmental remediation as a proof-of-concept application, the catalyst-on-hotspot design (edge-AgOcta@Cu2O) enhances photocatalytic advanced oxidation processes to achieve superior organic-pollutant degradation at ≈81% albeit having lesser Cu2O co-photocatalyst than the fully deposited design (full-AgOcta@Cu2O). Mass-normalized rate constants of edge-AgOcta@Cu2O reveal up to 20-fold and 3-fold more efficient utilization of Cu2O and Ag nanoparticles, respectively, compared to full-AgOcta@Cu2O and standalone catalysts. Moreover, this design also exhibits catalytic performance >4-fold better than emerging hybrid photocatalytic platforms. Mechanistic studies unveil that the light-concentrating effect facilitated by the dense electromagnetic hotspots is crucial to promote the generation and utilization of energetic photocarriers for enhanced catalysis. By enabling the plasmonic focusing of light onto co-photocatalyst at the single-particle level, the unprecedented design offers valuable insights in enhancing light-driven chemical reactions and realizing efficient energy/catalyst utilizations for diverse chemical, environmental, and energy applications.

Harmonizing Plasmonic and Photonic Effects to Boost Photocatalytic H2 Production over 550 mmol ⋠h-1 ⋠gcat -1.

Integrating plasmonic nanoparticles with photonic crystals holds immense potential to enhance green hydrogen photosynthesis by amplifying localized electromagnetic field through generating surface plasmons and slow photons. Current plasmonic photonic designs primarily employ semiconductor-based structural backbone deposited with plasmonic nanoparticles. However, the competition between various optical phenomena in these ensembles hinders effective field enhancement rather than facilitating it. This limitation creates a formidable performance bottleneck that retards hydrogen evolution. Herein, we enhance plasmonic catalysis for efficient hydrogen evolution by effectively harmonizing plasmonic and photonic effects. This is achieved by using inert SiO2 opal as a non-photoabsorbing photonic framework. By aligning the excitation wavelengths of surface plasmons and slow photons, our optimized plasmonic photonic crystals demonstrates a remarkable H2 evolution rate of 560 mmol h-1 gAg -1, surpassing bare plasmonic Ag nanoparticles by >106-fold and other high-performance photocatalytic designs by 280-fold. Mechanistic studies highlight the pivotal role of the non-photoabsorbing photonic backbone in facilitating effective light confinement through the photonic effect. This in turn boosts the plasmonic field for enhanced photocatalytic H2 evolution, even without needing additional co-catalysts. Our work offers valuable insights for future design of electromagnetically hot plasmonic catalysts to achieve efficient light-to-chemical transformations in diverse energy, chemical, and environmental applications.

Chaotropic Nanoelectrocatalysis: Chemically Disrupting Water Intermolecular Network at the Point-of-Catalysis to Boost Green Hydrogen Electrosynthesis.

Efficient green hydrogen production through electrocatalytic water splitting serves as a powerful catalyst for realizing a carbon-free hydrogen economy. However, current electrocatalytic designs face challenges such as poor hydrogen evolution reaction (HER) performance (Tafel slope, 100-140 mV dec-1 ) because water molecules are thermodynamically trapped within their extensive hydrogen bonding network. Herein, we drive efficient HER by manipulating the local water microenvironment near the electrocatalyst. This is achieved by functionalizing the nanoelectrocatalyst's surface with a monolayer of chaotropic molecules to chemically weaken water-water interactions directly at the point-of-catalysis. Notably, our chaotropic design demonstrates a superior Tafel slope (77 mV dec-1 ) and the lowest overpotential (0.3 V at 10 mA cm-2 ECSA ), surpassing its kosmotropic counterparts (which reinforces the water molecular network) and previously reported electrocatalytic designs by up to ≈2-fold and ≈3-fold, respectively. Comprehensive mechanistic investigations highlight the critical role of chaotropic surface chemistry in disrupting the water intermolecular network, thereby releasing free/weakly bound water molecules that strongly interact with the electrocatalyst to boost HER. Our study provides a unique molecular approach that can be readily integrated with emerging electrocatalytic materials to rapidly advance the electrosynthesis of green hydrogen, holding immense promise for sustainable chemical and energy applications.

Incorporating Chaotropic/Kosmotropic Chemistries onto Plasmonic Nanoheater to Boost Steam Generation Beyond its Photothermal Property.

Photothermal steam generation promises decentralized water purification, but current methods suffer from slow water evaporation even at high photothermal efficiency of ≈98%. This drawback arises from the high latent heat of vaporization that is required to overcome the strong and extensive hydrogen bonding network in water for steam generation. Here, light-to-vapor conversion is boosted by incorporating chaotropic/kosmotropic chemistries onto plasmonic nanoheater to manipulate water intermolecular network at the point-of-heating. The chaotropic-plasmonic nanoheater affords rapid light-to-vapor conversion (2.79 kg m-2  h-1  kW-1 ) at ≈83% efficiency, with the steam generation rate up to 6-fold better than kosmotropic platforms or emerging photothermal designs. Notably, the chaotropic-plasmonic nanoheater also lowers the enthalpy of water vaporization by 1.6-fold when compared to bulk water, signifying that a correspondingly higher amount of steam can be generated with the same energy input. Simulation studies unveil chaotropic surface chemistry is crucial to disrupt water hydrogen bonding network and suppress the energy barrier for water evaporation. Using the chaotropic-plasmonic nanoheater, organic-polluted water is purified at ≈100% efficiency, a feat otherwise challenging in conventional treatments. This study offers a unique chemistry approach to boost light-driven steam generation beyond a material photothermal property.

Superlattice-based Plasmonic Catalysis: Concentrating Light at the Nanoscale to Drive Efficient Nitrogen-to-Ammonia Fixation at Ambient Conditions.

Plasmonic catalysis promises green ammonia synthesis but is limited by the need for co-catalysts and poor performances due to weak electromagnetic field enhancement. Here, we use two-dimensional plasmonic superlattices with dense electromagnetic hotspots to boost ambient nitrogen-to-ammonia photoconversion without needing co-catalyst. By organizing Ag octahedra into a square superlattice to concentrate light, the ammonia formation is enhanced by ≈15-fold and 4-fold over hexagonal superlattice and disorganized array, respectively. Our unique catalyst achieves superior ammonia formation rate and apparent quantum yield up to ≈15-fold and ≈103 -fold, respectively, better than traditional designs. Mechanistic investigations reveal the abundance of intense plasmonic hotspots is crucial to promote hot electron generation and transfer for nitrogen reduction. Our work offers valuable insights to design electromagnetically hot plasmonic catalysts for diverse chemical and energy applications.

Electrolyte-Resistant Dual Materials for the Synergistic Safety Enhancement of Lithium-Ion Batteries.

Safety issues associated with lithium-ion batteries are of major concern, especially with the ever-growing demand for higher-energy-density storage devices. Although flame retardants (FRs) added to electrolytes can reduce fire hazards, large amounts of FRs are required and they severely deteriorate battery performance. Here, we report a feasible method to balance flame retardancy and electrochemical performance by coating an electrolyte-insoluble FR on commercial battery separators. By integrating dual materials via a two-pronged mechanism, the quantity of FR required could be limited to an ultrathin coating layer (4 µm) that rarely influences electrochemical performance. The developed composite separator has a four-times better flame retardancy than conventional polyolefin separators in full pouch cells. Additionally, this separator can be fabricated easily on a large scale for industrial applications. High-energy-density batteries (2 Ah) were assembled to demonstrate the scaling of the composite separator and to confirm its enhanced safety through nail penetration tests.

Designing a Nanoscale Three-phase Electrochemical Pathway to Promote Pt-catalyzed Formaldehyde Oxidation.

Gas-phase heterogeneous catalysis is a process spatially constrained on the two-dimensional surface of a solid catalyst. Here, we introduce a new toolkit to open up the third dimension. We discovered that the activity of a solid catalyst can be dramatically promoted by covering its surface with a nanoscale-thin layer of liquid electrolyte while maintaining efficient delivery of gas reactants, a strategy we call three-phase catalysis. Introducing the liquid electrolyte converts the original surface catalytic reaction into an electrochemical pathway with mass transfer facilitated by free ions in a three-dimensional space. We chose the oxidation of formaldehyde as a model reaction and observed a 25000-times enhancement in the turnover frequency of Pt in three-phase catalysis as compared to conventional heterogeneous catalysis. We envision three-phase catalysis as a new dimension for catalyst design and anticipate its applications in more chemical reactions from pollution control to the petrochemical industry.

Incorporating the Nanoscale Encapsulation Concept from Liquid Electrolytes into Solid-State Lithium-Sulfur Batteries.

Solid-state Li-S batteries are attractive due to their high energy density and safety. However, it is unclear whether the concepts from liquid electrolytes are applicable in the solid state to improve battery performance. Here, we demonstrate that the nanoscale encapsulation concept based on Li2S@TiS2 core-shell particles, originally developed in liquid electrolytes, is effective in solid polymer electrolytes. Using in situ optical cell and sulfur K-edge X-ray absorption, we find that polysulfides form and are well-trapped inside individual particles by the nanoscale TiS2 encapsulation. This TiS2 encapsulation layer also functions to catalyze the oxidation reaction of Li2S to sulfur, even in solid-state electrolytes, proven by both experiments and density functional theory calculations. A high cell-level specific energy of 427 W·h·kg-1 is achieved by integrating the Li2S@TiS2 cathode with a poly(ethylene oxide)-based electrolyte and a lithium metal anode. This study points to the fruitful direction of borrowing concepts from liquid electrolytes into solid-state batteries.

Applying a Nanoparticle@MOF Interface To Activate an Unconventional Regioselectivity of an Inert Reaction at Ambient Conditions.

Here we design an interface between a metal nanoparticle (NP) and a metal-organic framework (MOF) to activate an inert CO2 carboxylation reaction and in situ monitor its unconventional regioselectivity at the molecular level. Using a Kolbe-Schmitt reaction as model, our strategy exploits the NP@MOF interface to create a pseudo high-pressure CO2 microenvironment over the phenolic substrate to drive its direct C-H carboxylation at ambient conditions. Conversely, Kolbe-Schmitt reactions usually demand high reaction temperature (>125 °C) and pressure (>80 atm). Notably, we observe an unprecedented CO2 meta-carboxylation of an arene that was previously deemed impossible in traditional Kolbe-Schmitt reactions. While the phenolic substrate in this study is fixed at the NP@MOF interface to facilitate spectroscopic investigations, free reactants could be activated the same way by the local pressurized CO2 microenvironment. These valuable insights create enormous opportunities in diverse applications including synthetic chemistry, gas valorization, and greenhouse gas remediation.

Designing surface-enhanced Raman scattering (SERS) platforms beyond hotspot engineering: emerging opportunities in analyte manipulations and hybrid materials.

Surface-enhanced Raman scattering (SERS) is a molecule-specific spectroscopic technique with diverse applications in (bio)chemistry, clinical diagnosis and toxin sensing. While hotspot engineering has expedited SERS development, it is still challenging to detect molecules with no specific affinity to plasmonic surfaces. With the aim of improving detection performances, we venture beyond hotspot engineering in this tutorial review and focus on emerging material design strategies to capture and confine analytes near SERS-active surfaces as well as various promising hybrid SERS platforms. We outline five major approaches to enhance SERS performance: (1) enlarging Raman scattering cross-sections of non-resonant molecules via chemical coupling reactions; (2) targeted chemical capturing of analytes through surface-grafted agents to localize them on plasmonic surfaces; (3) physically confining liquid analytes on non-wetting SERS-active surfaces and (4) confining gaseous analytes using porous materials over SERS hotspots; (5) synergizing conventional metal-based SERS platforms with functional materials such as graphene, semiconducting materials, and piezoelectric polymers. These approaches can be integrated with engineered hotspots as a multifaceted strategy to further boost SERS sensitivities that are unachievable using hotspot engineering alone. Finally, we highlight current challenges in this research area and suggest new research directions towards efficient SERS designs critical for real-world applications.

Modulating Orientational Order to Organize Polyhedral Nanoparticles into Plastic Crystals and Uniform Metacrystals.

In nanoparticle self-assembly, the current lack of strategy to modulate orientational order creates challenges in isolating large-area plastic crystals. Here, we achieve two orientationally distinct supercrystals using one nanoparticle shape, including plastic crystals and uniform metacrystals. Our approach integrates multi-faceted Archimedean polyhedra with molecular-level surface polymeric interactions to tune nanoparticle orientational order during self-assembly. Experiments and simulations show that coiled surface polymer chains limit interparticle interactions, creating various geometrical configurations among Archimedean polyhedra to form plastic crystals. In contrast, brush-like polymer chains enable molecular interdigitation between neighboring particles, favoring consistent particle configurations and result in uniform metacrystals. Our strategy enhances supercrystal diversity for polyhedra comprising multiple nondegenerate facets.

ZIF-Induced d-Band Modification in a Bimetallic Nanocatalyst: Achieving Over 44 % Efficiency in the Ambient Nitrogen Reduction Reaction.

The electrochemical nitrogen reduction reaction (NRR) offers a sustainable solution towards ammonia production but suffers poor reaction performance owing to preferential catalyst-H formation and the consequential hydrogen evolution reaction (HER). Now, the Pt/Au electrocatalyst d-band structure is electronically modified using zeolitic imidazole framework (ZIF) to achieve a Faradaic efficiency (FE) of >44 % with high ammonia yield rate of >161 µg mgcat -1 h-1 under ambient conditions. The strategy lowers electrocatalyst d-band position to weaken H adsorption and concurrently creates electron-deficient sites to kinetically drive NRR by promoting catalyst-N2 interaction. The ZIF coating on the electrocatalyst doubles as a hydrophobic layer to suppress HER, further improving FE by >44-fold compared to without ZIF (ca. 1 %). The Pt/Au-NZIF interaction is key to enable strong N2 adsorption over H atom.

Concentrating Immiscible Molecules at Solid@MOF Interfacial Nanocavities to Drive an Inert Gas-Liquid Reaction at Ambient Conditions.

Gas-liquid reactions form the basis of our everyday lives, yet they still suffer poor reaction efficiency and are difficult to monitor in situ, especially at ambient conditions. Now, an inert gas-liquid reaction between aniline and CO2 is driven at 1 atm and 298 K by selectively concentrating these immiscible reactants at the interface between metal-organic framework and solid nanoparticles (solid@MOF). Real-time reaction SERS monitoring and simulations affirm the formation of phenylcarbamic acid, which was previously undetectable because they are unstable for post-reaction treatments. The solid@MOF ensemble gives rise to a more than 28-fold improvement to reaction efficiency as compared to ZIF-only and solid-only platforms, emphasizing that the interfacial nanocavities in solid@MOF are the key to enhance the gas-liquid reaction. Our strategy can be integrated with other functional materials, thus opening up new opportunities for ambient-operated gas-liquid applications.

Plasmonic Hotspots in Air: An Omnidirectional Three-Dimensional Platform for Stand-Off In-Air SERS Sensing of Airborne Species.

Molecular-level airborne sensing is critical for early prevention of disasters, diseases, and terrorism. Currently, most 2D surface-enhanced Raman spectroscopy (SERS) substrates used for air sensing have only one functional surface and exhibit poor SERS-active depth. "Aerosolized plasmonic colloidosomes" (APCs) are introduced as airborne plasmonic hotspots for direct in-air SERS measurements. APCs function as a macroscale 3D and omnidirectional plasmonic cloud that receives laser irradiation and emits signals in all directions. Importantly, it brings about an effective plasmonic hotspot in a length scale of approximately 2.3 cm, which affords 100-fold higher tolerance to laser misalignment along the z-axis compared with 2D SERS substrates. APCs exhibit an extraordinary omnidirectional property and demonstrate consistent SERS performance that is independent of the laser and analyte introductory pathway. Furthermore, the first in-air SERS detection is demonstrated in stand-off conditions at a distance of 200 cm, highlighting the applicability of 3D omnidirectional plasmonic clouds for remote airborne sensing in threatening or inaccessible areas.

Driving CO2 to a Quasi-Condensed Phase at the Interface between a Nanoparticle Surface and a Metal-Organic Framework at 1 bar and 298 K.

We demonstrate a molecular-level observation of driving CO2 molecules into a quasi-condensed phase on the solid surface of metal nanoparticles (NP) under ambient conditions of 1 bar and 298 K. This is achieved via a CO2 accumulation in the interface between a metal-organic framework (MOF) and a metal NP surface formed by coating NPs with a MOF. Using real-time surface-enhanced Raman scattering spectroscopy, a >18-fold enhancement of surface coverage of CO2 is observed at the interface. The high surface concentration leads CO2 molecules to be in close proximity with the probe molecules on the metal surface (4-methylbenzenethiol), and transforms CO2 molecules into a bent conformation without the formation of chemical bonds. Such linear-to-bent transition of CO2 is unprecedented at ambient conditions in the absence of chemical bond formation, and is commonly observed only in pressurized systems (>105 bar). The molecular-level observation of a quasi-condensed phase induced by MOF coating could impact the future design of hybrid materials in diverse applications, including catalytic CO2 conversion and ambient solid-gas operation.

SERS- and Electrochemically Active 3D Plasmonic Liquid Marbles for Molecular-Level Spectroelectrochemical Investigation of Microliter Reactions.

Liquid marbles are emergent microreactors owing to their isolated environment and the flexibility of materials used. Plasmonic liquid marbles (PLMs) are demonstrated as the smallest spectroelectrochemical microliter-scale reactor for concurrent spectro- and electrochemical analyses. The three-dimensional Ag shell of PLMs are exploited as a bifunctional surface-enhanced Raman scattering (SERS) platform and working electrode for redox process modulation. The combination of SERS and electrochemistry (EC) capabilities enables in situ molecular read-out of transient electrochemical species, and elucidate the potential-dependent and multi-step reaction dynamics. The 3D configuration of our PLM-based EC-SERS system exhibits 2-fold and 10-fold superior electrochemical and SERS performance than conventional 2D platforms. The rich molecular-level electrochemical insights and excellent EC-SERS capabilities offered by our 3D spectroelectrochemical system are pertinent in charge transfer processes.

Online Flowing Colloidosomes for Sequential Multi-analyte High-Throughput SERS Analysis.

3D plasmonic colloidosomes are superior SERS sensors owing to their high sensitivity and excellent tolerance to laser misalignment. Herein, we incorporate plasmonic colloidosomes in a microfluidic channel for online SERS detection. Our method resolves the poor signal reproducibility and inter-sample contamination in the existing online SERS platforms. Our flow system offers rapid and continuous online detection of 20 samples in less than 5 min with excellent signal reproducibility. The isolated colloidosomes prevent cross-sample and channel contamination, allowing accurate quantification of samples over a concentration range of five orders of magnitude. Our system demonstrates high-resolution multiplex detection with fully preserved signal and Raman features of individual analytes in a mixture. High-throughput multi-assay analysis is performed, which highlights that our system is capable of rapid identification and quantification of a sequence of samples containing various analytes and concentrations.