First Evidence of the Bioaccumulation and Trophic Transfer of Tire Additives and Their Transformation Products in an Estuarine Food Web.

The discovery of the significant lethal impacts of the tire additive transformation product N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine quinone (6PPD-Q) on coho salmon has garnered global attention. However, the bioaccumulation and trophic transfer of tire additives and their transformation products (TATPs) within food webs remain obscure. This study first characterized the levels and compositions of 15 TATPs in the Pearl River Estuary, estimated their bioaccumulation and trophic transfer potential in 21 estuarine species, and identified priority contaminants. Our observations indicated that TATPs were prevalent in the estuarine environment. Eight, six, seven, and 10 TATPs were first quantified in the shrimp, sea cucumber, snail, and fish samples, with total mean levels of 45, 56, 64, and 67 ng/g (wet weight), respectively. N,N'-Diphenyl-p-phenylenediamine (DPPD) and N,N'-bis(2-methylphenyl)-1,4-benzenediamine (DTPD) exhibited high bioaccumulation. Significant biodilution was only identified for benzothiazole, while DPPD and DTPD displayed biomagnification trends based on Monte Carlo simulations. The mechanisms of bioaccumulation and trophodynamics of TATPs could be explained by their chemical hydrophobicity, molecular mass, and metabolic rates. Based on a multicriteria scoring technique, DPPD, DTPD, and 6PPD-Q were characterized as priority contaminants. This work emphasizes the importance of biomonitoring, particularly for specific hydrophobic tire additives.

Bioaccumulation and Trophic Transfer of Organophosphate Flame Retardants and Their Metabolites in the Estuarine Food Web of the Pearl River, China.

The accumulation and trophodynamics of organophosphate flame retardants (OPFRs) and their metabolites were investigated in the estuarine food web of the Pearl River, China. The mean ∑OPFR concentration among the investigated species increased in the following order: fish [431 ± 346 ng/g lipid weight (lw)] < snail (1310 ± 621 ng/g lw) < shrimp (1581 ± 1134 ng/g lw) < crab (1744 ± 1397 ng/g lw). The di-alkyl phosphates (DAPs) of di-(n-butyl) phosphate (DNBP), bis(2-butoxyethyl) phosphate (BBOEP), and diphenyl phosphate (DPHP) were the most abundant metabolites, with concentrations same as or even higher than their corresponding parent compounds. The log bioaccumulation factors for most OPFRs were lower than 3.70, and significant biomagnification was only found for trisphenyl phosphate [TPHP, with the trophic magnification factors (TMFs) > 1]. The TMFs of OPFRs, except for TPHP and tributyl phosphate had a positive correlation with lipophilicity (log KOW, p ≤ 0.05) and a negative correlation with the biotransformation rate (log KM, p ≤ 0.05). The mean TMF > 1 was observed for all of the OPFR metabolites based on the bootstrap regression method. The "pseudo-biomagnification" of OPFR metabolites might be attributed to the biotransformation of OPFRs in organisms at high trophic levels.

Role of Gastrointestinal Microbiota from Crucian Carp in Microbial Transformation and Estrogenicity Modification of Novel Plastic Additives.

Ingestion is a major exposure route for hydrophobic organic pollutants in fish, but the microbial transformation and estrogenic modification of the novel plastic additives by the gut microbiota of fish remain obscure. Using an in vitro approach, we provide evidence that structure-related transformation of various plastic additives by the gastric and intestinal (GI) microbiota from crucian carp, with the degradation ratio of bisphenols and triphenyl phosphate faster than those of brominated compounds. The degradation kinetics for these pollutants could be limited by oxygen and cometabolic substrates (i.e., glucose). The fish GI microbiota could utilize the vast majority of carbon sources in a Biolog EcoPlate, suggesting their high metabolic potential and ability to transform various organic compounds. Unique microorganisms associated with transformation of the plastic additives including genera of Citrobacter, Klebsiella, and some unclassified genera in Enterobacteriaceae were identified by combining high-throughput genetic analyses and metagenomic analyses. Through identification of anaerobic transformation products by high-resolution mass spectrometry, alkyl-cleavage was found the common transformation mechanism, and hydrolysis was the major pathway for ester-containing pollutants. After anaerobic incubation, the estrogenic activities of triphenyl phosphate and bisphenols A, F, and AF declined, whereas that of bisphenol AP increased.

Novel Brominated Flame Retardants (NBFRs) in a Tropical Marine Food Web from the South China Sea: The Influence of Hydrophobicity and Biotransformation on Structure-Related Trophodynamics.

The increasing discharge and ubiquitous occurrence of novel brominated flame retardants (NBFRs) in aquatic environments have initiated intense global concerns; however, little information is available regarding their structure-related trophodynamics in marine food webs. In this study, a tropical marine food web including 29 species (18 fish and 11 invertebrate species) was collected from coral reef waters of the Xisha Islands, the South China Sea, for an analysis of 11 representative NBFRs. The mean ∑NBFR concentrations generally increased in the following sequence: sea cucumbers (0.330 ng/g lw) < crabs (0.380 ng/g lw) < shells (2.10 ng/g lw) < herbivorous fishes (2.30 ng/g lw) < carnivorous fishes (4.13 ng/g lw), with decabromodiphenyl ethane (DBDPE) and hexabromobenzene (HBB) as the predominant components. Trophic magnification was observed for all of the investigated NBFRs, with trophic magnification factors (TMFs) ranging from 1.53 (tetrabromobisphenol A bis(dibromopropyl ether)) to 5.32 (HBB). Significant negative correlations were also found between the TMFs and the tested in vitro transformation clearance rates (CLin vitro) for the target NBFRs except for bis(2-ethylhexyl)-3,4,5,6-tetrabromo-phthalate (TBPH) (p < 0.05). Multiple linear regression analysis confirmed that the transformation rate is a more powerful predictor for TMFs than the hydrophobicity of NBFRs in this marine food web.

Release of the additive metals from 3 commonly used plastics during the degradation under the treatment of UV irradiation.

Additive metals are continuously released into the environment during the photo-degradation of plastics into microplastics, but this phenomenon has not been reported by many studies. Herein, we investigated the surface morphology changes along with the release of additive metals (Cr, Mn, Fe, Co, Cu, Zn, and Pb) during the degradation of three types of plastics, i.e., polypropylene (PP), polyethylene terephthalate (PET) and polyvinyl chloride (PVC), under UV light irradiation. FTIR results showed that 168 days of UV-irradiation led to the primary degradation of each plastic sample. The metal release could be found after 70 days UV-irradiation. The rate of metal release for the three plastics showed the following order: PP > PET ≈ PVC. In addition, the distribution and concentrations of the metals in the plastic could influence the release characteristics of each metal. Low release rate of Fe symbolized by the total metal release in the range of 4.28 ~10.27% as evident from the results of the primary degradation experiment, indicated the release of Fe occurring in the late stage of the plastic degradation or even in the microplastics-formation stage. As for the release of Co from PP, it was far lower than that of the other elements (0.35%), showing the same release characteristics as that of Fe. On the contrary, the release ratio of Pb from PP was 78.89% and was mainly concentrated in the early stage of the plastic degradation. The results help understanding the release behavior of the additive metals during the degradation of typical plastics under ultraviolet light irradiation.

Characteristics of expanded polystyrene microplastics on island beaches in the Pearl River Estuary: abundance, size, surface texture and their metals-carrying capacity.

While expanded polystyrene (EPS) microplastics have been widely recognized as one of the most important components of plastic litter in the intertidal zones of the global ocean, our understanding of their environmental fate on island beaches is insufficient. In this study, we intended to reveal that the latest EPS microplastic pollution status on 5 island beaches in the Pearl River Estuary, China, by comprehensively assessing the abundance, distribution, size, surface texture and carrying capacity of heavy metals (Cd, As, Cr, Ni, Cu, Pb, Mn, Fe, Al). High level of EPS microplastic abundance ranged from 328 to 82,276 particles m-2 was found, with the highest abundance at Guishan Island and the lowest at Dong'ao Island. Spatial distribution of EPS microplastic abundance was significantly different among different islands. EPS microplastics in the size range of 1-2 mm were the most abundant. The content of heavy metals in EPS microplastics collected on the beaches was greater than that in the new EPS products. The average concentrations of heavy metals in EPS microplastics from 5 islands are Cd (0.27 ± 0.19 µg g-1), As (5.50 ± 3.84 µg g-1), Cr (14.9 ± 8.25 µg g-1), Cu (15.0 ± 7.66 µg g-1), Ni (17.2 ± 17.6 µg g-1), Pb (24.8 ± 7.39 µg g-1), Mn (730 ± 797 µg g-1), Fe (8340 ± 4760 µg g-1), and Al (9624 ± 6187 µg g-1), respectively. The correlation between heavy metals in EPS microplastics and sediments was better than that between heavy metals in EPS microplastics and seawater. The study results indicated that EPS microplastics could act as a carrier for the transport of heavy metals, which might pose a threat to biological and human health.

Uptake, Elimination, and Biotransformation Potential of a Progestagen (Cyproterone Acetate) in Tilapia Exposed at an Environmental Concentration.

Although the distribution of progestagens in aquatic environments has been widely reported, details on their uptake, elimination, and biotransformation in fish have received little attention. This study investigated the uptake, elimination, and biotransformation potential of a progestagen, cyproterone acetate (CPTA), in Nile tilapia ( Oreochromis niloticus) exposed to an environmentally relevant concentration under semistatic regimes. CPTA in tilapia tissues followed a similar pattern, reaching a concentration plateau within 4 days of exposure, and dropping to below limits of quantitation within 4 days of elimination. The calculated steady-state bioconcentration factors suggest a low bioconcentration potential of CPTA in juvenile tilapia. Results of enzymatic hydrolysis treatments revealed that no conjugates of CPTA were present in tissues, but conjugated biotransformation products of CPTA were found in bile, liver, and muscle. Most CPTA entered tissues and then was biotransformed into seven different products by phase I and phase II metabolism. The concentrations of endogenous cortisol were significantly influenced by CPTA in plasma and liver during the uptake period. These findings suggest that biotransformation products of CPTA should be considered for the assessment of the bioconcentration potential and ecological effects of progestagens.

Upgrading pyrolytic residue from waste tires to commercial carbon black.

The managing and recycling of waste tires has become a worldwide environmental challenge. Among the different disposal methods for waste tires, pyrolysis is regarded as a promising route. How to effectively enhance the added value of pyrolytic residue (PR) from waste tires is a matter of great concern. In this study, the PRs were treated with hydrochloric and hydrofluoric acids in turn under ultrasonic waves. The removal efficiency for the ash and sulfur was investigated. The pyrolytic carbon black (PCB) obtained after treating PR with acids was analyzed by X-ray fluorescence spectrophotometry, Fourier transform infrared spectrometry, X-ray diffractometry, laser Raman spectrometry, scanning electron microscopy, thermogravimetric (TG) analysis, and physisorption apparatus. The properties of PCB were compared with those of commercial carbon black (CCB) N326 and N339. Results showed PRs from waste tires were mainly composed of carbon, sulfur, and ash. The carbon in PCB was mainly from the CCB added during tire manufacture rather than from the pyrolysis of pure rubbers. The removal percentages for the ash and sulfur of PR are 98.33% (from 13.98 wt % down to 0.24 wt %) and 70.16% (from 1.81 wt % down to 0.54 wt %), respectively, in the entire process. The ash was mainly composed of metal oxides, sulfides, and silica. The surface properties, porosity, and morphology of the PCB were all close to those of N326. Therefore, PCB will be a potential alternative of N326 and reused in tire manufacture. This route successfully upgrades PR from waste tires to the high value-added CCB and greatly increases the overall efficiency of the waste tire pyrolysis industry.

Effects of Toxic Leachate from Commercial Plastics on Larval Survival and Settlement of the Barnacle Amphibalanus amphitrite.

Plastic pollution represents a major and growing global problem. It is well-known that plastics are a source of chemical contaminants to the aquatic environment and provide novel habitats for marine organisms. The present study quantified the impacts of plastic leachates from the seven categories of recyclable plastics on larval survival and settlement of barnacle Amphibalanus (=Balanus) amphitrite. Leachates from plastics significantly increased barnacle nauplii mortality at the highest tested concentrations (0.10 and 0.50 m(2)/L). Hydrophobicity (measured as surface energy) was positively correlated with mortality indicating that plastic surface chemistry may be an important factor in the effects of plastics on sessile organisms. Plastic leachates significantly inhibited barnacle cyprids settlement on glass at all tested concentrations. Settlement on plastic surfaces was significantly inhibited after 24 and 48 h, but settlement was not significantly inhibited compared to the controls for some plastics after 72-96 h. In 24 h exposure to seawater, we found larval toxicity and inhibition of settlement with all seven categories of recyclable commercial plastics. Chemical analysis revealed a complex mixture of substances released in plastic leachates. Leaching of toxic compounds from all plastics should be considered when assessing the risks of plastic pollution.

Enhancement of zinc-ion storage capability by synergistic effects on dual-ion adsorption in hierarchical porous carbon for high-performance aqueous zinc-ion hybrid capacitors.

Aqueous zinc-ion capacitors (AZICs) are considered potential energy storage devices thanks to their ultrahigh power density, high safety, and extended cycling life. Carbon-based materials widely used as cathodes in AZICs face challenges, such as inappropriate pore sizes, poor electrolyte-electrode wettability, and insufficient vacancy defects and active sites. These limitations hinder efficient energy storage capacity and long-term stability. To address these issues, the B and F co-doped hierarchical porous carbon cathode materials (BFPC) are constructed through a facile annealing treatment process. The BFPC-2//Zn device exhibited high capacities of 222.4 and 118.3 mAh g-1 at current densities of 0.2 and 10 A g-1, respectively. Notably, the BFPC-2//Zn device demonstrated long-term cycling stability with a high capacity retention of 96.9 % after 20,000 cycles at 10 A g-1. Additionally, the assembled BFPC-2 based AZICs displayed a maximum energy density of 175.8 Wh kg-1 and an ultrahigh power density of 17.3 kW kg-1. Mechanism studies revealed that the exceptional energy storage ability and charge-transfer process of the BFPC cathode are attributed to the synergistic effect of B and F heteroatoms and the coupling effect between vacancy defects and pore size. This work presents a novel design strategy by incorporating B and F active sites into hierarchical porous carbon materials, providing enhanced energy storage capabilities for practical application in AZICs.

Porous and graphitic carbon nanosheets with controllable structure for zinc-ion hybrid capacitor.

The imbalances of storage capacity and reaction kinetics between carbonaceous cathodes and zinc (Zn) anodes restrict the widespread application of Zn-ion hybrid capacitor (ZIHC). Structure optimization is a promising strategy for carbon materials to achieve sufficient Zn2+ storage sites and satisfied ion-electron kinetics. Herein, porous graphitic carbon nanosheets (PGCN) were simply synthesized using a K3[Fe(C2O4)3]- and urea-assisted foaming strategy with polyvinylpyrrolidone as carbon precursor, followed by activation and graphitization. Sufficient pores with well-matched pore sizes (0.80-1.94 nm) distributed across the carbon nanosheets can effectively shorten mass-transfer distance, promoting accessibility to active sites. A partially graphitic carbon structure with high graphitization degree can accelerate electron transfer. Furthermore, high nitrogen doping (7.2 at.%) provides additional Zn2+ storage sites to increase storage capacity. Consequently, a PGCN-based ZIHC has an exceptional specific capacity of 181 mAh g-1 at 0.5 A g-1, superb energy density of 145 Wh kg-1, and excellent cycling ability without capacity decay over 10,000 cycles. In addition, the flexible solid-state device assembled with PGCN exhibits excellent electrochemical performances even when bent at various angles. This study proposes a straightforward and economical strategy to construct porous graphitic carbon nanosheets with enhanced storage capacity and fast reaction kinetics for the high performance of ZIHC.

Organophosphate flame retardants and their metabolites in the Pearl River Estuary: Occurrence, influencing factors, and ecological risk control strategies based on a mass balance model.

Estuaries serve as crucial filters for land-based pollutants to the open sea, but there is a lack of information on the migration and fate of organophosphate flame retardants (OPFRs) within estuaries. This study focused on the Pearl River Estuary (PRE) by examining the co-occurrence of OPFRs and their metabolites and quantifying their transport fluxes using a mass balance model. The seawater concentrations of OPFRs and their metabolites exhibited significant seasonal variations (p < 0.01), while the sediment concentrations of OPFRs reflected the long-term distributional equilibrium in the PRE. The concentration of Σ9OPFRs in seawater showed a relentless dilution from the entrance to the offshore region in the normal and wet seasons, which was significantly in accordance with the gradients of pH, dissolved oxygen (DO), and salinity (p < 0.05). Furthermore, horizontal migration dominated the transport of OPFRs, and the inventory assessment revealed that both the water column and sediment were important reservoirs in the PRE. According to the estimated fluxes from the mass balance model, riverine input emerged as the principal pathway for OPFR entry into the PRE (1.55 × 105, 6.28 × 104, and 9.00 × 104 kg/yr in the normal, dry and wet seasons, respectively), whereas outflow to the open sea predominantly determined the main fates of the OPFRs. The risk quotient (RQ) results showed that EHDPHP (0.835) in water posed medium ecological risk, while other OPFRs and metabolites presented relatively lower risk (RQ < 0.1). The risk control effects were evaluated through scenario simulations of mathematical fitting between controllable source factors and the RQ of risky OPFR. The risk of EHDPHP in the PRE could be effectively reduced by restricting its concentrations in entrance region (<9.31, 8.67, and 12.7 ng/L in the normal, dry and wet seasons, respectively) of the PRE. This research offers foundational insights into environmental management and pollution control strategies for emerging pollutants in estuaries.

New insight into the bioaccumulation and trophic transfer of free and conjugated antibiotics in an estuarine food web based on multimedia fate and model simulation.

The substantial utilization of antibiotics causes their "pseudo-persistence" in offshore environments. Published studies on antibiotic surveillance in food webs have primarily emphasized on parent forms; however, the compositions and concentrations of conjugated antibiotics in aquatic organisms remain largely unexplored. This study systematically examined the distribution characteristics and trophodynamics of free antibiotics and their conjugated forms in an estuarine food web. Total antibiotic levels differed insignificantly between the surface and bottom waters. The total mean values of free antibiotics in crabs, fish, shrimps, sea cucumbers, and snails varied from 0.77 to 1.4 ng/g (wet weight). The numbers and values of antibiotics rose in these biological samples after enzymatic hydrolysis. Conjugated antibiotics accounted for 23.8-76.9% of the total antibiotics in the biological samples, revealing that conjugated forms play a non-negligible role in aquatic organisms. More number of antibiotics exhibited bioaccumulation capabilities after enzymatic hydrolysis. In the food web, the free forms of anhydroerythromycin and conjugated forms of trimethoprim and ciprofloxacin underwent trophic dilution, whereas the free forms of trimethoprim and conjugated forms of ofloxacin underwent trophic amplification. The present work provides new insights into the bioaccumulation and trophic transfer of free and conjugated antibiotics in food webs.

First insights into the bioaccumulation, biotransformation and trophic transfer of typical tetrabromobisphenol A (TBBPA) analogues along a simulated aquatic food chain.

Tetrabromobisphenol A (TBBPA) analogues have been investigated for their prevalent occurrence in environments and potential hazardous effects to humans and wildlife; however, there is still limited knowledge regarding their toxicokinetics and trophic transfer in aquatic food chains. Using a developed toxicokinetic model framework, we quantified the bioaccumulation, biotransformation and trophic transfer of tetrabromobisphenol S (TBBPS) and tetrabromobisphenol A di(allyl ether) (TBBPA-DAE) during trophic transfer from brine shrimp (Artemia salina) to zebrafish (Danio rerio). The results showed that the two TBBPA analogues could be readily accumulated by brine shrimp, and the estimated bioconcentration factor (BCF) value of TBBPS (5.68 L kg-1 ww) was higher than that of TBBPA-DAE (1.04 L kg-1 ww). The assimilation efficiency (AE) of TBBPA-DAE in zebrafish fed brine shrimp was calculated to be 16.3%, resulting in a low whole-body biomagnification factor (BMF) in fish (0.684 g g-1 ww). Based on the transformation products screened using ultra-high-performance liquid chromatograph-high resolution mass spectrometry (UPLC-HRMS), oxidative debromination and hydrolysis were identified as the major transformation pathways of TBBPS, while the biotransformation of TBBPA-DAE mainly took place through ether bond breaking and phase-II metabolism. Lower accumulation of TBBPA as a metabolite than its parent chemical was observed in both brine shrimp and zebrafish, with metabolite parent concentration factors (MPCFs) < 1. The investigated BCFs for shrimp of the two TBBPA analogues were only 3.77 × 10-10 - 5.59 × 10-3 times of the theoretical Kshrimp-water based on the polyparameter linear free energy relationships (pp-LFERs) model, and the BMF of TBBPA-DAE for fish was 0.299 times of the predicted Kshrimp-fish. Overall, these results indicated the potential of the trophic transfer in bioaccumulation of specific TBBPA analogues in higher trophic-level aquatic organisms and pointed out biotransformation as an important mechanism in regulating their bioaccumulation processes. ENVIRONMENTAL IMPLICATION: The internal concentration of a pollutant in the body determines its toxicity to organisms, while bioaccumulation and trophic transfer play important roles in elucidating its risks to ecosystems. Tetrabromobisphenol A (TBBPA) analogues have been extensively investigated for their adverse effects on humans and wildlife; however, there is still limited knowledge regarding their toxicokinetics and trophic transfer in aquatic food chains. This study investigated the bioaccumulation, biotransformation and trophic transfer of TBBPS and TBBPA-DAE in a simulated di-trophic food chain. This state-of-art study will provide a reference for further research on this kind of emerging pollutant in aquatic environments.

Microplastic pollution and regulating factors in the surface sediment of the Xuande Atolls in the South China Sea.

Microplastics are widely present in the marine environment, but their pollution and potential risk assessment in the seabed sediments have not been well addressed in remote sea areas. In this study, microplastics in 50 surface sediment samples from the Xuande Atolls at the Xisha of the South China Sea were studied. There were 20 samples with detectable microplastics of 5-20 items kg-1. They were all fibers in shapes and blue/transparent in colors with the dominant chemical component of polyester and the typical size of 0.02-3 mm. We found a large spatial variability of microplastic abundance in the surface sediment with generally low or undetectable levels in the lagoon deposits and the offshore deep-sea sediments but elevated abundances in the slope sediments of the Xuande Atolls. Correlation analyses suggested that microplastic variability in the Xisha sediment was less affected by local environmental parameters such as water depth, sediment particle size, organic carbon content, and sediment types. We also found that elevated microplastics in the seabed sediments on various sides of the Xuande Atolls could be related to the seasonal change in monsoon-driven currents. Finally, a low risk of microplastic pollution in the surface sediment of the Xisha is concluded based on the assessments of the polymer hazard index and the pollution load index. These findings provide not only a baseline understanding of microplastics but also their dynamics in the surface sediment of the remote Xisha area of the South China Sea.

Atmospheric microplastics at a southern China metropolis: Occurrence, deposition flux, exposure risk and washout effect of rainfall.

Atmospheric microplastics (AMPs) have raised much concern for public health due to their potential for exposure. In this study, temporal distribution, characteristics and exposure risk of AMPs were studied in the urban area of Guangzhou, a metropolis in Southern China, and the washout effect of rainfall on AMPs was investigated. It was found that AMP abundances in Guangzhou were in a range of 0.01-0.44 items/m3, with higher abundance in the wet season (0.19 ± 0.01 items/m3) than in the dry season (0.15 ± 0.02 items/m3). The distribution of AMPs did not correspond to that of common air pollutants (e.g., PM2.5 and PM10), implying that their pollution sources might be distinct. In Guangzhou, a total of 1.26 × 1011 items AMPs are in the air every year, and annual inhalation exposure of adults was estimated to be in the range of 79.65-3.50 × 103 items. The annual deposition flux of AMPs is 65.94 ± 7.53 items/m2/d, and the deposition flux in the wet season (84.00 ± 6.95 items/m2/d) was much greater than that in the dry season (47.88 ± 8.35 items/m2/d). Furthermore, rainfall has an effective mechanism for removing AMPs from the atmosphere, with an average washout ratio of (19.39 ± 6.48) × 104 for rainfall washing AMPs out. Compared to moderate rain (2.5-10 mm/h) and heavy rain (10-50 mm/h), light rain (rainfall intensity <2.5 mm/h) had a better washout effect. This study contributes to the evaluation of AMP exposure risk and understanding of AMP environmental behavior and fate by providing long-term monitoring data on AMPs and quantifying the washout effect of rainfall on AMPs for the first time.

Adsorption of heavy metals on biodegradable and conventional microplastics in the Pearl River Estuary, China.

In recent years, microplastics (MPs) as emerging carriers for environmental pollutants have attracted increasing worldwide attention. However, the adsorption of heavy metals on MPs, especially for biodegradable MPs, has been still poorly understood in estuarine environments. In this study, we investigated the aging of biodegradable and conventional MPs in the Pearl River Estuary after long-term exposure and their impacts on the adsorption of heavy metals from seawater. The results showed that the changes in surface characteristics were more prominent on biodegradable MPs than on conventional MPs after aging. Both biodegradable and conventional MPs could adsorb heavy metals, and their adsorption capacities fluctuated greatly on different MPs and different exposure times. The adsorption capacities of Cu, Pb, and As on biodegradable MPs were higher than those on conventional MPs, whereas Mn, Cr, and Co had lower adsorption on biodegradable MPs after 9-12 months by inductively coupled plasma-mass spectrometry (ICP-MS). The aging characteristics (CI, O/C, and Xc) of MPs accounted for a contribution of 51.0% on heavy metal adsorption, while the environmental factors (temperature, salinity, pH, and heavy metal concentration) only contributed to 13.2%. Therefore, the present study can provide important evidence on the environmental behaviors and ecological risks of biodegradable and conventional MPs in estuarine systems.

Rational design of activated graphitic carbon spheres with optimized ion and electron transfer channels for zinc-ion hybrid capacitors.

Herein, three-dimensional activated graphitic carbon spheres (AGCS) were constructed by simultaneous activation-graphitization of Fe-tannic acid coordination spheres with the assistance of KOH. Nanosheets-assembled AGCS with complex intersecting channel system can expose more active sites for charge storage. Simultaneous activation-graphitization can relieve trade-off relationship between porosity and conductivity of carbon materials. Benefiting from multiple synergistic effects of large specific surface area (2069 m2 g-1), abundant ion-accessible micropores (>0.78 nm), good electronic conductivity (IG/ID = 1.11), and moderate amount of oxygen doping, the optimized AGCS-2 has favored ion and electron transfer channels. AGCS-2 based zinc-ion hybrid capacitor (ZIHC) displays a high specific capacity of 148.6 mA h g-1 (334 F g-1) at 0.5 A g-1, a remarkable energy density of 119.0 W h kg-1 at 1440 W kg-1, and superior cycling life with 96% capacity retention after 10,000 cycles. This simultaneous activation-graphitization strategy may open up a new avenue to design novel carbon spheres linking optimal pores and graphitic carbon structure for ZIHC application.

Vertical distribution and transport of microplastics in the urban atmosphere: New insights from field observations.

The distribution and transport of atmospheric microplastics (AMPs) have raised concerns regarding their potential effects on the environment and human health. Although previous studies have reported the presence of AMPs at ground level, there is a lack of comprehensive understanding of their vertical distribution in urban environments. To gain insight into the vertical profile of AMPs, field observations were conducted at four different heights (ground level, 118 m, 168 m and 488 m) of the Canton Tower in Guangzhou, China. Results showed that the profiles of AMPs and other air pollutants had similar layer distribution patterns, although their concentrations differed. The majority of AMPs were composed of polyethylene terephthalate and rayon fibers ranging from 30 to 50 µm. As a result of atmospheric thermodynamics, AMPs generated at ground level were only partially transported upward, leading to a decrease in their abundance with increasing altitude. The study found that the stable atmospheric stability and lower wind speed between 118 m and 168 m resulted in the formation of a fine layer where AMPs tended to accumulate instead of being transported upward. This study for the first time delineated the vertical profile of AMPs within the atmospheric boundary layer, providing valuable data for understanding the environmental fate of AMPs.

Microplastic contamination in coral reef fishes and its potential risks in the remote Xisha areas of the South China Sea.

Microplastics are recognized as a newly emerging threat to marine organisms as they can be ingested and accumulated through multiple trophic levels. However, microplastic contamination and its potential risk assessment in coral reef fishes have been less addressed, particularly in remote ocean regions. In this study, microplastics in 167 samples of coral reef fish (a total of eighteen species) from the Xisha areas of the South China Sea were studied. There were fifteen species of coral reef fish contaminated by microplastics with an average occurrence rate of 29.3 %. The shape of microplastics in the fishes was mostly fibrous with small sizes (400-900 µm) and light colors (transparent and blue). The dominant types of microplastic polymers are polyamide and polyethylene terephthalate, accounting for 77 % and 11 % of microplastics in the fish body. There were generally more microplastics in the herbivorous fishes than the carnivorous ones. The highest microplastic abundance and occurrence was found in parrotfish due to its direct feeding on the microplastics-contaminated corals. In addition, there were much more microplastics in the gastrointestinal tracts than in the gills of the Xisha fishes. Microplastic abundance was found negatively correlated with the trophic level of the Xisha fishes supporting a stronger microplastic impact at lower levels of marine animals. Finally, a risk assessment using the polymer hazard index (PHI) revealed that microplastic contamination in the Xisha fishes was lower than those in the eutrophic coast. Our study provides new evidence for the widespread presence of microplastic contamination in the fishes of the remote Xisha coral reefs.