Low-Temperature and Fast-Charge Sodium Metal Batteries.

Low-temperature operation of sodium metal batteries (SMBs) at the high rate faces challenges of unstable solid electrolyte interphase (SEI), Na dendrite growth, and sluggish Na+ transfer kinetics, causing a largely capacity curtailment. Herein, low-temperature and fast-charge SMBs are successfully constructed by synergetic design of the electrolyte and electrode. The optimized weak-solvation dual-salt electrolyte enables high Na plating/stripping reversibility and the formation of NaF-rich SEI layer to stabilize sodium metal. Moreover, an integrated copper sulfide electrode is in situ fabricated by directly chemical sulfuration of copper current collector with micro-sized sulfur particles, which significantly improves the electronic conductivity and Na+ diffusion, knocking down the kinetic barriers. Consequently, this SMB achieves the reversible capacity of 202.8 mAh g-1 at -20 °C and 1 C (1 C = 558 mA g-1). Even at -40 °C, a high capacity of 230.0 mAh g-1 can still be delivered at 0.2 C. This study is encouraging for further exploration of cryogenic alkali metal batteries, and enriches the electrode material for low-temperature energy storage.

Ti─O─C Bonding at 2D Heterointerfaces of 3D Composites for Fast Sodium Ion Storage at High Mass Loading Level.

3D composite electrodes have shown extraordinary promise as high mass loading electrode materials for sodium ion batteries (SIBs). However, they usually show poor rate performance due to the sluggish Na+ kinetics at the heterointerfaces of the composites. Here, a 3D MXene-reduced holey graphene oxide (MXene-RHGO) composite electrode with Ti─O─C bonding at 2D heterointerfaces of MXene and RHGO is developed. Density functional theory (DFT) calculations reveal the built-in electric fields (BIEFs) are enhanced by the formation of bridged interfacial Ti─O─C bonding, that lead to not only faster diffusion of Na+ at the heterointerfaces but also faster adsorption and migration of Na+ on the MXene surfaces. As a result, the 3D composite electrodes show impressive properties for fast Na+ storage. Under high current density of 10 mA cm-2, the 3D MXene-RHGO composite electrodes with high mass loading of 10 mg cm-2 achieve a strikingly high and stable areal capacity of 3 mAh cm-2, which is same as commercial LIBs and greatly exceeds that of most reported SIBs electrode materials. The work shows that rationally designed bonding at the heterointerfaces represents an effective strategy for promoting high mass loading 3D composites electrode materials forward toward practical SIBs applications.

Effectively coupling of SnSe2nanosheet with N, Se co-doped carbon nanofibers as self-standing anode for lithium-ion batteries.

Tin selenides possess layered structure and high theoretical capacity, which is considered as desirable anode material for lithium-ion batteries. However, its further development is limited by the low intrinsic electrical conductivity and sluggish reaction kinetics. Herein, a well-designed structure of SnSe2nanosheet attached on N, Se co-doped carbon nanofibers (SnSe2@CNFs) is fabricated as self-standing anodes for lithium-ion batteries. The integration of structural engineering and heteroatom doping enables accelerated electrons transfer and rapid ion diffusion for boosting Li+storage performance. Impressively, the flexible SnSe2@CNFs anodes exhibit inspiring capacity of 837.7 mAh g-1after 800 cycles at 1.2 C with coulombic efficiency almost 100% and superior rate performance 419.5 mAh g-1at 2.4 C. The kinetics analysis demonstrates the pseudocapacitive characteristic of SnSe2@CNFs promotes the storage property. This work sheds light on the hierarchical electrode construction towards high-performance energy storage applications.

Recent progress in aqueous aluminum-ion batteries.

Aqueous aluminum-ion batteries have many advantages such as their safety, environmental friendliness, low cost, high reserves and the high theoretical specific capacity of aluminum. So aqueous aluminum-ion batteries are potential substitute for lithium-ion batteries. In this paper, the current research status and development trends of cathode and anode materials and electrolytes for aqueous aluminum-ion batteries are described. Aiming at the problem of passivation, corrosion and hydrogen evolution reaction of aluminum anode and dissolution and irreversible change of cathode after cycling in aqueous aluminum-ion batteries. Solutions of different research routes such as ASEI (artificial solid electrolyte interphase), alloying, amorphization, elemental doping, electrolyte regulation, etc and different transformation mechanisms of anode and cathode materials during cycling have been summarized. Moreover, it looks forward to the possible research directions of aqueous aluminum-ion batteries in the future. We hope that this review can provide some insights and support for the design of more suitable electrode materials and electrolytes for aqueous aluminum-ion batteries.

Improving efficiency and color purity of poly(9,9-dioctylfluorene) through addition of a high boiling-point solvent of 1-chloronaphthalene.

In this work, the ß-phase of poly(9,9-dioctylfluorene) (PFO) was used as a probe to study the effects of the addition of a high boiling-point solvent of 1-chloronaphthalene on the nanostructures and electroluminescence of PFO films. Both absorption and photoluminescence spectra showed that the content of the ß-phase in PFO film was obviously enhanced as a result of the addition of a small amount of 1-chloronaphthalene into the processing solvent of p-xylenes. Apparently rougher morphology associated with the effectively enhanced ordering of polymer chains across the entire film was observed for films processed from p-xylene solutions consisting of a certain amount of 1-chloronaphthalene, as revealed by atomic force microscopy and grazing incidence x-ray diffraction measurements. In addition to the effects on the nanostructures of films, of particular interest is that the performance and color purity of polymer light-emitting devices can be noticeably enhanced upon the addition of 1-chloronaphthalene. These observations highlight the importance of controlling the nanostructures of the emissive layer, and demonstrate that the addition of a low volume ratio of high boiling-point additive can be a promising strategy to attain high-performance polymer light-emitting diodes.

Macroscale preparation of CoS2 nanoparticles for ultra-high fast-charging performance in sodium-ion batteries.

Improving the fast-charging capabilities and energy storage capacity of electric vehicles presents a feasible strategy for mitigating the prevalent concern of range anxiety in the market. Nanostructure electrode materials play a crucial role in this process. However, the current method of preparation is arduous and yields restricted quantities. In view of this, we have devised an innovative approach that provides convenience and efficacy, facilitating the large-scale synthesis of CoS2 nanoparticles, which exhibited exceptional performance. When the current density was 1000 mA g-1, the discharging capacity reached 760 mAh g-1 after 400 cycles. Remarkably, even at an increased current density of 5000 mA g-1, the discharging capacity of CoS2 remained at 685.5 mAh g-1. The ultra-high performance could be attributed to the specific surface area, which minimized the diffusion distance of sodium-ions during the charging and discharging processes and mitigated the extent of structural damage. Our straightforward preparation techniques facilitate the mass production and present a novel approach for the development of cost-effective and high-performing anode materials for sodium-ion batteries.

Dual-functional ionic liquids additive enables dendrite-free Zn anode with ultra-long cycle life over one year.

Zn anodes suffer from the formation of uncontrolled dendrites aggravated by the uneven electric field and the insulating by-product accumulation in aqueous zinc-ion batteries (AZIBs). Here, an effective strategy implemented by 1-butyl-3-methylimidazolium hydrogen sulfate (BMIHSO4) additive is proposed to synergistically tune the crystallographic orientation of zinc deposition and suppress the formation of zinc hydroxide sulfate for enhancing the reversibility on Zn anode surface. As a competing cation, BMI+ is proved to preferably adsorb on Zn-electrode compared with H2O molecules, which shields the "tip effect" and inhibits the Zn-deposition agglomerations to inducing the horizontal growth along Zn (002) crystallographic texture. Simultaneously, the protonated BMIHSO4 additives could remove the detrimental OH- in real-time to fundamentally eliminate the accumulation of 6Zn(OH)2·ZnSO4·4H2O and Zn4SO4(OH)6·H2O on Zn anode surface. Consequently, Zn anode exhibits an ultra-long cycling stability of one year (8762 h) at 0.2 mA cm-2/0.2 mAh cm-2, 3600 h at 2 mA cm-2/2 mAh cm-2 with a high plating cumulative capacity of 3.6 Ah cm-2, and a high average Coulombic efficiency of 99.6 % throughout 1000 cycles. This work of regulating Zn deposition texture combined with eliminating notorious by-products could offer a desirable way for stabilizing the Zn-anode/electrolyte interface in AZIBs.

A highly sensitive and selective aptasensor based on graphene oxide fluorescence resonance energy transfer for the rapid determination of oncoprotein PDGF-BB.

Oncoprotein platelet derived growth factor-BB (PDGF-BB) is one of the most critical growth factors that regulates tumor growth and division. In this work, a highly sensitive and selective fluorescence resonance energy transfer (FRET) aptasensor for PDGF-BB detection based on the assembly of dye-labeled aptamer and graphene oxide (GO) is developed for the first time. Due to the non-covalent assembly between aptamer and GO, fluorescence quenching of the dye takes place because of FRET. In the presence of PDGF-BB, the binding between aptamer and PDGF-BB will disturb the interaction between aptamer and GO, and release the dye-labeled aptamer from the GO surface, resulting in restoration of the fluorophore fluorescence. Because of the high fluorescence quenching efficiency, unique structure, and electronic properties of GO, the GO aptasensor exhibits extraordinarily high sensitivity. We also demonstrate that two highly related molecular variants of PDGF (AA, AB) can be distinguished from PDGF-BB, which indicates the aptasensor has excellent selectivity. Such an aptasensor opens a rapid, selective and sensitive route for the detection of PDGF-BB and provides a promising strategy for other cancer-related proteins detections.

Economic synthesis of sub-micron brick-like Al-MOF with designed pore distribution for lithium-ion battery anodes with high initial Coulombic efficiency and cycle stability.

Metal-organic frameworks (MOFs) have exhibited great potential for lithium-ion batteries (LIBs). However, to date, it is difficult to fabricate MOF electrode materials with regular shape and rational pore distribution by an economic approach, and the currently achieved MOF electrode materials usually have a relatively low initial Coulombic efficiency and poor cycle stability, which is not satisfactory for practical application. In this study, by using the recycled AlCl3 solution after dealloying treatment of Al-Si alloy, an evenly distributed brick-like Al-MOF with sub-micron size and rational pore distribution was synthesized for the first time. Because of the larger size and more macropores, the as-prepared Al-MOF electrode exhibits superior initial Coulombic efficiency as high as 96.6% for LIB anodes. Moreover, on account of the irregular crystal defects at the edge of the designed macropores, which result from unstable connection between the inorganic nodes (AlO6 octahedral cluster) and the organic linkers (PTA) and result in the formation of spherical nano-sized particles with better structural stability, the electrode materials show excellent cycle stability with discharge attenuation rate of 0.051%. The electrochemical performance considerably outperforms that of reported Al-MOF anodes and some representative MOF anodes in other studies. The robust realization of high initial Coulombic efficiency and cycle stability defines a critical step to capturing the full potential of MOF electrode materials in practical LIBs.

A Silicon Monoxide Lithium-Ion Battery Anode with Ultrahigh Areal Capacity.

Silicon monoxide (SiO) is an attractive anode material for next-generation lithium-ion batteries for its ultra-high theoretical capacity of 2680 mAh g-1. The studies to date have been limited to electrodes with a relatively low mass loading (< 3.5 mg cm-2), which has seriously restricted the areal capacity and its potential in practical devices. Maximizing areal capacity with such high-capacity materials is critical for capitalizing their potential in practical technologies. Herein, we report a monolithic three-dimensional (3D) large-sheet holey graphene framework/SiO (LHGF/SiO) composite for high-mass-loading electrode. By specifically using large-sheet holey graphene building blocks, we construct LHGF with super-elasticity and exceptional mechanical robustness, which is essential for accommodating the large volume change of SiO and ensuring the structure integrity even at ultrahigh mass loading. Additionally, the 3D porous graphene network structure in LHGF ensures excellent electron and ion transport. By systematically tailoring microstructure design, we show the LHGF/SiO anode with a mass loading of 44 mg cm-2 delivers a high areal capacity of 35.4 mAh cm-2 at a current of 8.8 mA cm-2 and retains a capacity of 10.6 mAh cm-2 at 17.6 mA cm-2, greatly exceeding those of the state-of-the-art commercial or research devices. Furthermore, we show an LHGF/SiO anode with an ultra-high mass loading of 94 mg cm-2 delivers an unprecedented areal capacity up to 140.8 mAh cm-2. The achievement of such high areal capacities marks a critical step toward realizing the full potential of high-capacity alloy-type electrode materials in practical lithium-ion batteries.

Traditional Chinese medicine residue-derived micropore-rich porous carbon frameworks as efficient sulfur hosts for high-performance lithium-sulfur batteries.

Biomass-derived carbon-based energy materials are receiving extensive attention nowadays. With the widespread use of traditional Chinese medicines in the treatment of diseases and health care, a great deal of herb residues are thrown away after the unique decoction process. Here, through hydrothermal carbonization combined with KOH activation, a micropore-rich and nitrogen-doped porous carbon framework (MRNCF) is prepared from the waste roots of a kind of well-known and widely used traditional Chinese medicine, Acanthopanax senticosus. Compared with ordinary carbon-based sulfur host materials, the MRNCFs can effectively hinder the shuttling effect and dissolution of polysulfides through the synergistic action of physical confinement in micropores and chemical anchoring for nitrogen doping, and the lithium-sulfur batteries using MRNCF as the host present superior electrochemical performance. In a high sulfur content of over 75%, the as-prepared electrodes exhibit a highly reversible specific capacity of 540.4 mA h g-1 at a current density of 0.5C after 150 cycles and an excellent rate capability at different current densities.

Bio-Inspired Isoalloxazine Redox Moieties for Rechargeable Aqueous Zinc-Ion Batteries.

Organic electrode materials hold great potential for fabricating sustainable energy storage systems, however, the development of organic redox-active moieties for rechargeable aqueous zinc-ion batteries is still at an early stage. Here, we report a bio-inspired riboflavin-based aqueous zinc-ion battery utilizing an isoalloxazine ring as the redox center for the first time. This battery exhibits a high capacity of 145.5 mAh g-1 at 0.01 A g-1 and a long-life stability of 3000 cycles at 5 A g-1 . We demonstrate that isoalloxazine moieties are active centers for reversible zinc-ion storage by using optical and photoelectron spectroscopies as well as theoretical calculations. Through molecule-structure tailoring of riboflavin, the obtained alloxazine and lumazine molecules exhibit much higher theoretical capacities of 250.3 and 326.6 mAh g-1 , respectively. Our work offers an effective redox-active moiety for aqueous zinc batteries and will enrich the valuable material pool for electrode design.

Covalent Selenium Embedded in Hierarchical Carbon Nanofibers for Ultra-High Areal Capacity Li-Se Batteries.

Lithium selenium (Li-Se) batteries have attracted increasing interest for its high theoretical volumetric capacities up to 3,253 Ah L-1. However, current studies are largely limited to electrodes with rather low mass loading and low areal capacity, resulting in low volumetric performance. Herein, we report a design of covalent selenium embedded in hierarchical nitrogen-doped carbon nanofibers (CSe@HNCNFs) for ultra-high areal capacity Li-Se batteries. The CSe@HNCNFs provide excellent ion and electron transport performance, whereas effectively retard polyselenides diffusion during cycling. We show that the Li-Se battery with mass loading of 1.87 mg cm-2 displays a specific capacity of 762 mAh g-1 after 2,500 cycles, with almost no capacity fading. Furthermore, by increasing the mass loading to 37.31 mg cm-2, ultra-high areal capacities of 7.30 mAh cm-2 is achieved, which greatly exceeds those reported previously for Li-Se batteries.

Ultra-high Areal Capacity Realized in Three-Dimensional Holey Graphene/SnO2 Composite Anodes.

Nanostructured alloy-type electrode materials and its composites have shown extraordinary promise for lithium-ion batteries (LIBs) with exceptional gravimetric capacity. However, studies to date are usually limited to laboratory cells with too low mass loading (and thus too low areal capacity) to exert significant practical impact. Herein, by impregnating micrometer-sized SnO2/graphene composites into 3D holey graphene frameworks (HGF), we show that a well-designed 3D-HGF/SnO2 composite anode with a high mass loading of 12 mg cm-2 can deliver an ultra-high areal capacity up to 14.5 mAh cm-2 under current density of 0.2 mA cm-2 and stable areal capacity of 9.5 mAh cm-2 under current density of 2.4 mA cm-2, considerably outperforming those in the state-of-art research devices or commercial devices. This robust realization of high areal capacity defines a critical step to capturing the full potential of high-capacity alloy-type electrode materials in practical LIBs.

Three-dimensional holey-graphene/niobia composite architectures for ultrahigh-rate energy storage.

Nanostructured materials have shown extraordinary promise for electrochemical energy storage but are usually limited to electrodes with rather low mass loading (~1 milligram per square centimeter) because of the increasing ion diffusion limitations in thicker electrodes. We report the design of a three-dimensional (3D) holey-graphene/niobia (Nb2O5) composite for ultrahigh-rate energy storage at practical levels of mass loading (>10 milligrams per square centimeter). The highly interconnected graphene network in the 3D architecture provides excellent electron transport properties, and its hierarchical porous structure facilitates rapid ion transport. By systematically tailoring the porosity in the holey graphene backbone, charge transport in the composite architecture is optimized to deliver high areal capacity and high-rate capability at high mass loading, which represents a critical step forward toward practical applications.

White Polymer Light-Emitting Diodes Based on Exciplex Electroluminescence from Polymer Blends and a Single Polymer.

In this Article, we designed and synthesized a series of polyfluorene derivatives, which consist of the electron-rich 4,4'-(9-alkyl-carbazole-3,6-diyl)bis(N,N-diphenylaniline) (TPA-Cz) in the side chain and the electron-deficient dibenzothiophene-5,5-dioxide (SO) unit in the main chain. The resulting copolymer PF-T25 that did not comprise the SO unit exhibited blue light-emission with the Commission Internationale de L'Eclairage coordinates of (0.16, 0.10). However, by physically blending PF-T25 with a blue light-emitting SO-based oligomer, a novel low-energy emission correlated to exciplex emerged due to the appropriate energy level alignment of TPA-Cz and the SO-based oligomers, which showed extended exciton lifetime as confirmed by time-resolved photoluminescent spectroscopy. The low-energy emission was also identified in copolymers consisting of SO unit in the main chain, which can effectively compensate for the high-energy emission to produce binary white light-emission. Polymer light-emitting diodes based on the exciplex-type single greenish-white polymer exhibit the peak luminous efficiency of 2.34 cd A(-1) and the maximum brightness of 12 410 cd m(-2), with Commission Internationale de L'Eclairage color coordinates (0.27, 0.39). The device based on such polymer showed much better electroluminescent stability than those based on blending films. These observations indicated that developing a single polymer with the generated exciplex emission can be a novel and effective molecular design strategy toward highly stable and efficient white polymer light-emitting diodes.

Facile and universal superhydrophobic modification to fabricate waterborne, multifunctional nacre-mimetic films with excellent stability.

Although numerous kinds of waterborne, nacre-mimetic films with excellent properties have been fabricated via different assembly methods, it remains difficult to put those kinds of lightweight materials into practical applications because they are sensitive to water in the environment. Herein, a simple superhydrophobic modification method was used to enhance the repellency of film to water and/or corrosive liquids in the environment. Furthermore, it lowered the gas transmission rate of the films dramatically and improved the heat and flame shield capabilities. This approach could also be applied to other kinds of nacre-mimetic films, proving to be a versatile, low-cost, fast, and facile method to produce large-area and thick, waterborne, multifunctional films with excellent repellency to water and some corrosive liquids in the environment, which will pave the road for the practical applications of nacre-mimetic films.

Enhanced microwave absorption property of reduced graphene oxide (RGO)-MnFe2O4 nanocomposites and polyvinylidene fluoride.

MnFe2O4 nanoparticles have been synthesized on a large scale by a simple hydrothermal process in a wild condition, and the RGO/MnFe2O4 nanocomposites were also prepared under ultrasonic treatment based on the synthesized nanoparticles. The absorption properties of MnFe2O4/wax, RGO/MnFe2O4/wax and the RGO/MnFe2O4/PVDF (polyvinylidene fluoride) composites were studied; the results indicated that the RGO/MnFe2O4/PVDF composites show the most excellent wave absorption properties. The minimum reflection loss of RGO/MnFe2O4/PVDF composites with filler content of 5 wt % can reach -29.0 dB at 9.2 GHz, and the bandwidth of frequency less than -10 dB is from 8.00 to 12.88 GHz. The wave absorbing mechanism can be attributed to the dielectric loss, magnetic loss and the synergetic effect between RGO+MnFe2O4, RGO+PVDF and MnFe2O4+PVDF.

One-pot synthesis of hematite@graphene core@shell nanostructures for superior lithium storage.

Novel hematite@graphene composites have been successfully synthesized by a one-pot surfactant governed approach under mild wet-chemical conditions. A series of characterizations including X-ray diffraction (XRD), Raman spectrum, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) indicated that the hematite nanoparticles with relatively uniform size were encapsulated by graphene layers and were able to form core-shell nanostructures. The electrochemical properties of hematite@graphene core-shell nanostructures as anodes for lithium-ion batteries were evaluated by galvanostatic charge-discharge and AC impedance spectroscopy techniques. The as-prepared hematite@graphene core-shell nanostructures exhibited a high reversible specific capacity of 1040 mA h g(-1) at a current density of 200 mA g(-1) (0.2 C) after 180 cycles and excellent rate capability and long cycle life. Furthermore, a reversible capacity as high as 500 mA h g(-1) was still achieved after 200 cycles even at a high rate of 6 C. The electrochemical test results show that the hematite@graphene composites prepared by the one-pot wet chemical method are promising anode materials for lithium-ion batteries.

Deposition SnO(2)/nitrogen-doped graphene nanocomposites on the separator: a new type of flexible electrode for energy storage devices.

It is currently very urgent to develop flexible energy storage devices because of the growing academic interest in and strong technical demand of flexible electronics. Exploration of high-performance electrode materials and a corresponding assembly method for fabrication of flexible energy storage devices plays a critical role in fulfilling this demand. Here, we have developed a facile, economic, and green hydrothermal process to synthesize ultrasmall SnO2 nanocrystallites/nitrogen-doped graphene nanocomposites (USNGs) as a high-performance electrode material for Li-ion batteries (LIBs). Furthermore, using the glass microfiber filters (GMFs) as supporting substrate, the novel flexible USNG-GMF bilayered films have been prepared by depositing the as-prepared USNG on GMF through a simple vacuum filtration. Significantly, for the first time, the flexible USNG-GMF bilayered films have directly been used for assembling LIBs, where the GMF further functions as a separator. The obtained highly robust, binder-free, conducting agent-free, and current collector-free new type of flexible electrodes show excellent LIB performance.