Posterior-Stabilized Antibiotic Cement Articulating Spacer With Endoskeleton-Reinforced Cam Reduces Rate of Post-Cam Mechanical Complications in Prosthetic Knee Infection: A Preliminary Study.

BACKGROUND: Posterior-stabilized antibiotic cement articulating spacers (PS spacers) reduce spacer mechanical complications in prosthetic knee infections (PKIs); however, joint dislocation after femoral cam fracture has been reported. We hypothesized that the rate of post-cam mechanical complications is lower in PS spacers with an endoskeleton-reinforced cam. METHOD: A retrospective study of PKIs using PS spacers with or without a Kirschner wire-reinforced cam (K-PS or nK-PS spacers, respectively) was conducted between 2015 and 2019. The rates of post-cam mechanical complications and reoperation, as well as risk factors for post or cam failure, were analyzed. RESULTS: The cohort included 118 nK-PS and 49 K-PS spacers. All patients were followed up for 2 years. The rate of joint subluxation/dislocation after femoral cam fracture was lower in K-PS (0%) than in nK-PS spacers (17.8%; P = .002). The reoperation rate for spacer mechanical complications was lower in K-PS (0%) than in nK-PS spacers (11.9%; P = .008). The identified risk factors for femoral cam fractures were body mass index ≥25 kg/m2, femoral spacer size ≤2, and surgical volume ≤12 resection arthroplasties per year. CONCLUSION: This preliminary study highlights that K-PS spacers have a lower rate of post-cam mechanical complications than nK-PS spacers. We recommend the use of PS spacers with endoskeleton-reinforced cam when treating PKIs performed by surgeons with lower surgical volumes, especially in patients with higher body mass index and smaller femoral spacer sizes.

Clinical Outcomes of Single Versus Double Plating in Distal-Third Humeral Fractures Caused by Arm Wrestling: A Retrospective Analysis.

Background and Objectives: Arm wrestling is a simple and popular activity among young people that causes distal-third humeral fractures. However, injury to the young population may cause economic loss; therefore, they need to return to work as soon as possible. Accordingly, we aimed to compare radiological and functional outcomes of distal-third humeral fractures caused by arm wrestling treated with double and single plating. Materials and Methods: Thirty-four patients with distal-third humeral fractures caused by arm wrestling were treated between January 2015 and January 2021. They were separated into double- and single-plating groups and treated using a triceps-sparing approach. Regular follow-up was performed to evaluate elbow functionality, range of motion, bone union, and complications; the American Shoulder and Elbow Surgeons score was used for functional assessment. Results: Patients treated with single plating exhibited union rate, union time, and elbow range of motion similar to those of patients treated with double plating; however, they exhibited better pain and functional outcomes (American Shoulder and Elbow Surgeons score) at 2 weeks, 1 month, and 3 months postoperatively (84.50 ± 5.01 vs. 61.70 ± 12.53 at 2 weeks, 96.20 ± 2.63 vs. 84.25 ± 14.56 at 1 month, and 100.00 vs. 94.76 ± 9.71 at 3 months, p < 0.05). The two groups exhibited no significant differences after 1 year (100.00 vs. 98.54 ± 3.99, p < 0.13). The overall complication rate was significantly higher in patients treated with double plating than in those treated with single plating (18.75% vs. 5.56%). Radial nerve palsy was observed in patients in both groups. Conclusions: In patients with distal-third humeral fractures caused by arm wrestling, single plating provides a union rate and elbow range of motion similar to those of double plating, with significantly fewer complications and lower surgical time and blood loss with improved early functional outcomes.

Cruciate-Retaining vs Posterior-Stabilized Antibiotic Cement Articulating Spacers for Two-Stage Revision of Prosthetic Knee Infection: A Retrospective Cohort Study.

BACKGROUND: Antibiotic cement articulating spacers are recommended during 2-stage revision for prosthetic knee infection because of increased range of motion (ROM) and improved function; however, spacer mechanical complications have been reported. We aimed to determine the association between different constraints of articulating spacers and the rate of complications and infection eradication, functional outcomes, and ROM. METHODS: A retrospective study of prosthetic knee infection using cruciate-retaining (CR) or posterior-stabilized (PS) spacers was conducted between 2011 and 2018. The rate of spacer mechanical complications, infection eradication after reimplantation and reoperation, Hospital of Special Surgery (HSS) knee score, and ROM during the interim stage were analyzed. All patients were regularly followed up for 2 years. RESULTS: One hundred forty-one patients were included, with 66 CR and 75 PS spacers. Overall mechanical complication rate was lower in PS (9.3%) than in CR spacers (45.5%) (P < .001), especially in joint dislocation (1.3% vs 30.3%, respectively, P < .001). Overall reoperation rate was lower in PS (16.0%) than in CR spacers (36.4%) (P < .001), especially for mechanical complications (1.3% vs 24.2%, respectively, P < .001). HSS knee score was higher in PS (72.3) than in CR spacers (63.8) (P < .001). ROM was greater in PS (90.3°) than in CR spacers (80.6°) (P = .005), especially at maximum flexion (102.4° vs 89.6°, respectively, P = .003). Infection eradication was comparable between the spacers. CONCLUSION: Both spacers can control infection; however, PS spacers had a lower rate of mechanical complications and reoperation, better HSS knee scores, and greater ROM than CR spacers.

The Effects of Tgfb1 and Csf3 on Chondrogenic Differentiation of iPS Cells in 2D and 3D Culture Environment.

Mesenchymal stem (MS) cells, embryonic stem (ES) cells, and induced pluripotent stem (iPS) cells are known for their ability to differentiate into different lineages, including chondrocytes in culture. However, the existing protocol for chondrocyte differentiation is time consuming and labor intensive. To improve and simplify the differentiation strategy, we have explored the effects of interactions between growth factors (transforming growth factor ß1 (Tgfb1) and colony stimulating factor 3 (Csf3), and culture environments (2D monolayer and 3D nanofiber scaffold) on chondrogenic differentiation. For this, we have examined cell morphologies, proliferation rates, viability, and gene expression profiles, and characterized the cartilaginous matrix formed in the chondrogenic cultures under different treatment regimens. Our data show that 3D cultures support higher proliferation rate than the 2D cultures. Tgfb1 promotes cell proliferation and viability in both types of culture, whereas Csf3 shows positive effects only in 3D cultures. Interestingly, our results indicate that the combined treatments of Tgfb1 and Csf3 do not affect cell proliferation and viability. The expression of cartilaginous matrix in different treatment groups indicates the presence of chondrocytes. We found that, at the end of differentiation stage 1, pluripotent markers were downregulated, while the mesodermal marker was upregulated. However, the expression of chondrogenic markers (col2a1 and aggrecan) was upregulated only in the 3D cultures. Here, we report an efficient, scalable, and convenient protocol for chondrogenic differentiation of iPS cells, and our data suggest that a 3D culture environment, combined with tgfb1 and csf3 treatment, promotes the chondrogenic differentiation.

Anthropometric Factors on Safe Distances between Popliteal Vessels to the Femur for Cerclage Wiring of the Distal Femoral Fracture: A Magnetic Resonance Imaging Study.

Background and Objectives: The proximity of the popliteal vessels in the distal femur may increase the risk of iatrogenic vascular injury during cerclage wiring. In this study, the closest location and distance of the popliteal vessels to the femur was examined using magnetic resonance imaging (MRI). The associations between anthropometric factors and the distance that would guide the placement of wires safely during surgery were also identified. Materials and Methods: We reviewed adult knee magnetic resonance images and recorded: (1) the relation and the shortest horizontal distance (d-H) from the femoral cortex to the popliteal vessels in axial images and (2) the vertical distance (d-V) from the adductor tubercle to the axial level of the d-H values in coronal images. The effects of anthropometric factors (sex, age, body height, body weight, body mass index, thigh circumference, femoral length and femoral width) on these distances were analysed. Results: Analysis of 206 knee magnetic resonance images revealed that the closet locations of popliteal vessels were at the posteromedial aspect of the femur. The d-H and d-V were 7.38 ± 3.22 mm and 57.01 ± 11.14 mm, respectively, and were both shorter in women than in men (p < 0.001). Multivariate analysis identified thigh circumference and femoral length as the most influential factors for the d-H and d-V, respectively (p < 0.001). Linear regression demonstrated a strong positive linear correlation between the thigh circumference and the d-H and between the femoral length and the d-V (Pearson's r = 0.891 and 0.806, respectively (p < 0.001)). Conclusions: The closet location and distance of the popliteal vessels to the femur provide useful information for wire placement during distal femoral fracture surgery while minimising the risk of vascular injury. Given that patients with a smaller thigh circumference and a shorter femoral length are more likely to have a smaller d-H and a shorter d-V, respectively, cautious measures should be taken in such cases.

Medullary-Sparing Antibiotic Cement Articulating Spacer Reduces the Rate of Mechanical Complications in Advanced Septic Hip Arthritis: A Retrospective Cohort Study.

Antibiotic cement articulating spacers eradicate infection during a two-stage revision for advanced septic hip arthritis (ASHA); however, mechanical complications have been reported. We hypothesized that the rate of mechanical complications would be lower in medullary-sparing (MS) than in non-medullary-sparing (n-MS) articulating spacers. A retrospective study of ASHA using n-MS or MS spacers was conducted between 1999 and 2019. The rate of mechanical complications and reoperation and risk factors for mechanical complications were analyzed. The cohort included 71 n-MS and 36 MS spacers. All patients were followed up for 2 years. The rate of spacer dislocation was lower in MS (0%) than in n-MS spacers (14.1%; p = 0.014). The reoperation rate for mechanical complications was lower in MS (0%) than in n-MS spacers (12.7%; p = 0.019). The rate of a diaphyseal stem during reimplantation was lower in MS (0%) than in n-MS spacers (19.4%; p = 0.002). The identified risk factors for n-MS spacer dislocation were postoperative under-restored femoral head diameter ≥3 mm, femoral offset ≥3 mm, and surgical volume (≤6 resection arthroplasties per year). Both spacers controlled infection. However, MS spacers had a lower spacer dislocation and reoperation rate and avoided the diaphyseal stem during reimplantation. We recommend using MS spacers to restore native femoral head diameter and femoral offset when ASHA is treated by surgeons with lower surgical volumes.

Effect of Surgeon Volume on Mechanical Complications after Resection Arthroplasty with Articulating Spacer.

Two-stage revision with an antibiotic-loaded cement articulating spacer is a standard treatment for chronic prosthetic knee infection (PKI); however, mechanical complications can occur during the spacer period. There is limited evidence on the association between surgeon volume and mechanical complications after resection arthroplasty (RA) using an articulating spacer. This study aimed to compare the rates of mechanical complications and reoperation after RA with articulating spacers by surgeons with high volumes (HV) and low volumes (LV) of RA performed and analyzed the risk factors for mechanical failure. The retrospective study investigated 203 patients treated with PKIs who underwent RA with articulating spacers and were divided according to the number of RAs performed by the surgeons: HV (≥14 RAs/year) or LV (<14 RAs/year). Rates of mechanical complications and reoperations were compared. Risk factors for mechanical complications were analyzed. Of the 203 patients, 105 and 98 were treated by two HV and six LV surgeons, respectively. The mechanical complication rate was lower in HV surgeons (3.8%) than in LV surgeons (36.7%) (p < 0.001). The reoperation rate for mechanical complications was lower in HV surgeons (0.9%) than in LV surgeons (24.5%) (p < 0.001). Additionally, 47.2% of patients required hinge knees after mechanical spacer failure. Medial proximal tibial angle < 87°, recurvatum angle > 5°, and the use of a tibial spacer without a cement stem extension were risk factors for mechanical complications. Based on these findings, we made the following three conclusions: (1) HV surgeons had a lower rate of mechanical complications and reoperation than LV surgeons; (2) mechanical complications increased the level of constraint in final revision knee arthroplasty; and (3) all surgeons should avoid tibial spacer varus malalignment and recurvatum deformity and always use a cement stem extension with a tibial spacer.

3D-biofabricated chondrocyte-laden decellularized extracellular matrix-contained gelatin methacrylate auxetic scaffolds under cyclic tensile stimulation for cartilage regeneration.

Three-dimensional (3D) hydrogel constructs can mimic features of the extracellular matrix (ECM) and have tailorable physicochemical properties to support and maintain the regeneration of articular cartilage. Various studies have shown that mechanical cues affect the cellular microenvironment and thereby influence cellular behavior. In this study, we fabricated an auxetic scaffold to investigate the effect of 3D tensile stimulation on chondrocyte behavior. Different concentrations of decellularized extracellular matrix (dECM) were mixed with fish gelatin methacrylate (FGelMa) and employed for the preparation of dECM/FGelMa auxetic bio-scaffolds using 3D biofabrication technology. We show that when human chondrocytes (HCs) were incorporated into these scaffolds, their proliferation and the expression of chondrogenesis-related markers increased with dECM content. The function of HC was influenced by cyclic tensile stimulation, as shown by increased production of the chondrogenesis-related markers, collagen II and glycosaminoglycans, with the involvement of the yes-associated protein 1 signaling pathway. The biofabricated auxetic scaffold represents an excellent platform for exploring interactions between cells and their mechanical microenvironment.

Trends and treatments of pelvic and acetabular fractures in Taiwan: facing an aging society.

Pelvic-acetabular fractures lead to high mortality in elders and their association between different groups is not known. Our results indicate that older age with pelvic-acetabular fracture was significantly associated with mortality. This finding may help planning and allocating healthcare resources, risk stratification, and optimizing the treatment of pelvic fractures. PURPOSE: Pelvic or acetabular fractures are among main outcomes of low-energy trauma such as falls, especially in older adults. They represent approximately 3-8% of all fractures and are associated with a high mortality rate ranging from 4 to 28%. This study is aimed at comparing the incidence and trends of hip fractures and pelvic-acetabular fractures in the Taiwanese general population, gender differences in adults aged over 65 years, and mortality risk between pelvic or acetabular fractures and hip fractures and surgery trends in patients with these fractures. METHODS: A retrospective study was conducted extracting data from the National Health Insurance Research Database of patients diagnosed with hip fracture and pelvic acetabular fracture between 2000 and 2018. RESULTS: Older age with pelvic-acetabular fracture was significantly associated with increased mortality. No significant differences were found in comorbidities between the two fracture groups. Results provide clear epidemiological evidence for trends in pelvic-acetabular fractures in Taiwan and demonstrate the need for better strategies to manage these fractures and comorbidities, particularly in older adults. CONCLUSION: Findings of this study may aid in planning and allocating healthcare resources, risk stratification, and optimizing the treatment of pelvic fractures among older adults in Taiwan.

Clinical and Radiographic Outcomes of Inversed Restricted Kinematic Alignment Total Knee Arthroplasty by Asia Specific (Huang's) Phenotypes, a Prospective Pilot Study.

Inverse restricted kinematic alignment (irKA) was modified from restricted kinematic alignment for total knee arthroplasty (TKA). This prospective single-center study aimed to evaluate the outcomes of irKA-TKA on all knee subtypes classified by Asia specific (Huang's) phenotypes. A total of 96 knees that underwent irKA-TKA at one hospital between January 2018 and June 2020 were included, with 15 knees classified in Type 1, nine in Type 2, 15 in Type 3, 47 in Type 4, and 10 in Type 5 by Huang's phenotypes. Outcomes were knee alignment measures and patient-reported satisfaction evaluated by the Western Ontario and McMaster Universities Arthritis Index (WOMAC) and traditional Chinese version of the Forgotten Joint Score-12 (FJS-12). Follow-up was one year. Type 4 knee was most significantly corrected in all angles by irKA-TKA, followed by Type 2 and 3 knees. Type 5 and 1 knee were only significantly corrected in some angles. The correlation between FJS-12 and WOMAC was good at 6 months (Pearson correlation coefficient (r) = 0.74) and moderate at 6 weeks, 3 months, and 12 months during follow-up (r = 0.37~0.47). FJS-12 and WOMAC displayed comparable hip-knee-ankle angle cut-off value (4.71° vs. 6.20°), sensitivity (70.49% vs. 67.19%), specificity (84.00% vs. 85.71%), and Youden index (54.49% vs. 52.90%) in prediction of good prognosis. In conclusion, irKA-TKA corrects knee alignment in all knee types with increasing satisfaction for one-year follow-up. Knees with presurgical varus deformity are most recommended for irKA-TKA. Both presurgical scores of the traditional Chinese version of FJS-12 and WOMAC predict the prognosis of irKA-TKA.

The exosomal secretomes of mesenchymal stem cells extracted via 3D-printed lithium-doped calcium silicate scaffolds promote osteochondral regeneration.

The development of surface modification techniques has brought about a major paradigm shift in the clinical applications of bone tissue regeneration. Biofabrication strategies enable the creation of scaffolds with specific microstructural environments and biological components. Lithium (Li) has been reported to exhibit anti-inflammatory, osteogenic, and chondrogenic properties by promoting several intracellular signaling pathways. Currently, research focuses on fabricating scaffolds with simultaneous dual bioactivities to enhance osteochondral regeneration. In this study, we modified the surface of calcium silicate (CS) scaffolds with Li using a simple immersion technique and evaluated their capabilities for bone regeneration. The results showed that Li ions could be easily coated onto the surfaces of CS scaffolds without affecting the microstructural properties of CS itself. Furthermore, the modifications did not affect the printing capabilities of the CS, and porous scaffolds could be fabricated via extrusion. Moreover, the presence of Li improved the surface roughness and hydrophilicity, thus leading to enhanced secretion of osteochondral-related regeneration factors, such as alkaline phosphatase (ALP), bone sialoprotein (BSP), and collagen II (Col II) proteins. Subsequent in vivo studies, including histological and micro-CT analyses, confirmed that the Li-modified CS scaffolds promoted osteochondral regeneration. The transcriptome analysis suggested that the enhanced osteochondrogenic capabilities of our scaffolds were influenced by paracrine exosomes. We hope this study will inspire further research on osteochondral regeneration.

Perioperative Radiographic Predictors of Non-Union in Infra-Isthmal Femoral Shaft Fractures after Antegrade Intramedullary Nailing: A Case-Control Study.

Antegrade intramedullary (IM) nailing is the gold standard treatment for femoral shaft fractures; however, the non-union rate of infra-isthmal femoral shaft fractures is still high after antegrade IM nailing. This retrospective case−control study aimed to determine the association between perioperative radiographic factors and the non-union of infra-isthmal femoral shaft fractures after antegrade IM nailing. Univariate and multivariate analyses were used to evaluate the radiographic risk factors of non-union. Ninety-three patients were included, with thirty-one non-unions and sixty-two matched controls between 2007 and 2017. All were regularly followed up for 2 years. Receiver operating characteristic analysis revealed that a ratio of the unfixed distal segment > 32.5% was strongly predictive of postoperative non-union. The risk factors for non-union were AO/OTA type B and C (odds ratio [OR]: 2.20), a smaller ratio of the distal fragment (OR: 4.05), a greater ratio of the unfixed distal segment (OR: 7.16), a higher ratio of IM canal diameter to nail size at the level of fracture (OR: 6.23), and fewer distal locking screws (OR: 2.31). The radiographic risk factors for non-union after antegrade IM nailing for infra-isthmal femoral shaft fractures were unstable fractures, shorter distal fragments, longer unfixed distal fragments, wider IM canal, and fewer distal locking screws. Surgeons must strive to avoid non-union with longer and larger nails and apply more distal locking screws, especially for unstable, wider IM canal, and shorter distal fragment fractures.

Synergistic Effect of Static Magnetic Fields and 3D-Printed Iron-Oxide-Nanoparticle-Containing Calcium Silicate/Poly-ε-Caprolactone Scaffolds for Bone Tissue Engineering.

In scaffold-regulated bone regeneration, most three-dimensional (3D)-printed scaffolds do not provide physical stimulation to stem cells. In this study, a magnetic scaffold was fabricated using fused deposition modeling with calcium silicate (CS), iron oxide nanoparticles (Fe3O4), and poly-ε-caprolactone (PCL) as the matrix for internal magnetic sources. A static magnetic field was used as an external magnetic source. It was observed that 5% Fe3O4 provided a favorable combination of compressive strength (9.6 ± 0.9 MPa) and degradation rate (21.6 ± 1.9% for four weeks). Furthermore, the Fe3O4-containing scaffold increased in vitro bioactivity and Wharton's jelly mesenchymal stem cells' (WJMSCs) adhesion. Moreover, it was shown that the Fe3O4-containing scaffold enhanced WJMSCs' proliferation, alkaline phosphatase activity, and the osteogenic-related proteins of the scaffold. Under the synergistic effect of the static magnetic field, the CS scaffold containing Fe3O4 can not only enhance cell activity but also stimulate the simultaneous secretion of collagen I and osteocalcin. Overall, our results demonstrated that Fe3O4-containing CS/PCL scaffolds could be fabricated three dimensionally and combined with a static magnetic field to affect cell behaviors, potentially increasing the likelihood of clinical applications for bone tissue engineering.

Three-Dimensional Printing and Fracture Mapping in Pelvic and Acetabular Fractures: A Systematic Review and Meta-Analysis.

Three-dimensional printing and fracture mapping technology is gaining popularity for preoperative planning of fractures. The aim of this meta-analysis is to further understand for the effects of 3D printing and fracture mapping on intraoperative parameters, postoperative complications, and functional recovery on pelvic and acetabular fractures. The PubMed, Embase, Cochrane and Web of Science databases were systematically searched for articles according to established criteria. A total of 17 studies were included in this study, of which 3 were RCTs, with a total of 889 patients, including 458 patients treated by traditional open reduction and internal fixation methods and 431 patients treated using 3D printing strategies. It was revealed that three-dimensional printing and fracture mapping reduced intraoperative surgical duration (RoM 0.74; 95% CI; 0.66-0.83; I2 = 93%), and blood loss (RoM 0.71; 95% CI; 0.63-0.81; I2 = 71%). as compared to traditional surgical approaches. In addition, there was significantly lower exposure to intraoperative imaging (RoM 0.36; 95% CI; 0.17-0.76; I2 = 99%), significantly lower postoperative complications (OR 0.42; 95% CI; 0.22-0.78; I2 = 9%) and significantly higher excellent/good reduction (OR 1.53; 95% CI; 1.08-2.17; I2 = 0%) in the three-dimensional printing and fracture mapping group. Further stratification results with only prospective studies showed similar trends. Three-dimensional printing and fracture mapping technology has potential in enhancing treatment of complex fractures by improving surgical related factors and functional outcomes and therefore could be considered as a viable tool for future clinical applications.

Arthroscopy-Assisted Reduction and Internal Fixation versus Open Reduction and Internal Fixation for Glenoid Fracture with Scapular Involvement: A Retrospective Cohort Study.

BACKGROUND: We investigated the superiority of arthroscopy-assisted reduction and internal fixation (ARIF) to open reduction and internal fixation (ORIF) for treating glenoid fracture with scapular involvement. METHODS: We retrospectively enrolled patients with glenoid fracture who underwent ARIF or ORIF from 2010-2020. Radiographic outcomes were assessed, and clinical outcomes (active range of motion [ROM], visual analog scale [VAS], Constant, and Disabilities of the Arm, Shoulder and Hand [DASH]) were evaluated 12 months postoperatively. RESULTS: Forty-four patients with Ideberg type II-VI glenoid fractures (ARIF: 20; ORIF: 24; follow-up 12-22 months) were included. Union was achieved in all patients. Active ROM values were comparable between the approaches. Constant and DASH scores were non-significantly better with ARIF (90.9 ± 9.2 vs. 86.6 ± 18.1 [p = 0.341] and 6.8 ± 9.4 vs. 9.3 ± 21.3 [p = 0.626], respectively). However, VAS scores were significantly lower with ARIF (1.5 ± 0.6 vs. 2.7 ± 1.4, p = 0.001). Associated intra-articular lesions (articular depressions [80%], superior labral anterior-posterior tear [20%], labral tears [30%]) were found in most ARIF cases and were repaired during ARIF. CONCLUSIONS: For glenoid fracture with scapular involvement, ARIF allows accurate diagnosis of fracture pattern and the management of associated intra-articular lesions, with better pain control outcomes than ORIF. Thus, arthroscopy-assistant surgery should be considered in patient with glenoid fracture.

Acetabular Fractures with Central Hip Dislocation: A Retrospective Consecutive 50 Case Series Study Based on AO/OTA 2018 Classification in Midterm Follow-Up.

INTRODUCTION: Management of acetabular fractures is challenging, especially when a medial acetabular fracture is complicated by central hip dislocation. We retrospectively investigated the clinical outcome and risk factors of secondary hip osteoarthritis requiring total hip arthroplasty after the surgical treatment of acetabular fractures with central hip dislocation. MATERIALS AND METHODS: The medical records of all patients who had acetabular medial wall fractures with central hip dislocation treated with open reduction and internal fixation by a single surgeon between January 2015 and June 2017 were reviewed. Surgical reduction was performed with the modified Stoppa with/without the Kocher-Langenbeck (KL) approach. Patients were followed for a minimum of three years, and the Majeed scoring system was used for functional evaluation. Multivariate logistic regression analysis was used to assess the association of patients' characteristics with the likelihood of advanced posttraumatic arthritis developing with conversion to total hip arthroplasty. RESULTS: Fifty patients were included in this study, with disease classified as AO/OTA 2018 62B/62C. Thirty-five patients (70%) had good or excellent Majeed pelvic scores. Eleven patients (22%) eventually received total hip arthroplasty because of end-stage posttraumatic arthritis. Three risk factors identified for total hip arthroplasty were male sex, initial marginal impaction, and sciatic nerve injury. Kaplan-Meier survivorship analysis estimated that the cumulative probability of free-from-end-stage arthritis was 78% (95% confidence interval, 73%-90%) at the 5-year follow-up. CONCLUSION: Surgical fixation with the modified Stoppa and the KL approach for acetabular medial wall fractures with central hip dislocation is an effective approach with a satisfactory functional outcome. A prodromal factor was marginal impaction concomitant with articular damage. The trauma of high axial loading and the occupational distribution (males performing heavy manual labor and heavy lifting) with preoperative sciatic nerve injury increased the odds of developing end-stage arthritis.

Digital Light Processing Bioprinted Human Chondrocyte-Laden Poly (γ-Glutamic Acid)/Hyaluronic Acid Bio-Ink towards Cartilage Tissue Engineering.

Cartilage injury is the main cause of disability in the United States, and it has been projected that cartilage injury caused by osteoarthritis will affect 30% of the entire United States population by the year 2030. In this study, we modified hyaluronic acid (HA) with γ-poly(glutamic) acid (γ-PGA), both of which are common biomaterials used in cartilage engineering, in an attempt to evaluate them for their potential in promoting cartilage regeneration. As seen from the results, γ-PGA-GMA and HA, with glycidyl methacrylate (GMA) as the photo-crosslinker, could be successfully fabricated while retaining the structural characteristics of γ-PGA and HA. In addition, the storage moduli and loss moduli of the hydrogels were consistent throughout the curing durations. However, it was noted that the modification enhanced the mechanical properties, the swelling equilibrium rate, and cellular proliferation, and significantly improved secretion of cartilage regeneration-related proteins such as glycosaminoglycan (GAG) and type II collagen (Col II). The cartilage tissue proof with Alcian blue further demonstrated that the modification of γ-PGA with HA exhibited suitability for cartilage tissue regeneration and displayed potential for future cartilage tissue engineering applications. This study built on the previous works involving HA and further showed that there are unlimited ways to modify various biomaterials in order to further bring cartilage tissue engineering to the next level.

Isolated Middle-Third Clavicle Fracture Causing Horner's Syndrome: A Case Report and Literature Review.

The pathophysiology of Horner's syndrome arises due to compression or destruction of the oculosympathetic nerve pathway. Traumatic Horner's syndrome may indicate lethal neurovascular injury, such as brain stem lesion, cervical spine injury, or carotid artery dissection. The middle-third is the most common type of clavicle fracture. However, the association of the isolated middle-third clavicle fracture and Horner's syndrome is rare. We report the case of a 47 year-old woman who presented to our emergency department with acute trauma. Severe tenderness and limited mobility were observed in her left shoulder. On radiographic examination, a middle-third clavicle fracture was diagnosed. Ptosis and myosis were also noticed on further examination, and she was subsequently diagnosed with Horner's syndrome. A survey of the brain, cervical spine, carotid artery, and lung revealed no pathological findings. Surgery for the clavicle fracture was performed 2 days after the accident. The patient recovered from Horner's syndrome gradually over the 2 months following the surgery, and the syndrome completely resolved by the third month. To the best of our knowledge, this is the first report of traumatic Horner's syndrome caused by an isolated middle-third clavicle fracture. The improved outcome may be attributed to the surgical intervention for middle-third clavicle fracture, which may help release ganglion or neuronal compression.

Preliminary clinical and radiographic outcomes of proximal humeral fractures: comparison of ALPS and PHILOS plating in Asian patients in Taiwan.

BACKGROUND: Up to 20% of proximal humeral fractures need to be treated operatively. However, numerus complications were reported by using fixed angled locking plates. The ALPS Proximal Humerus Plating System is a new design implant with novel design features. The aim of this study was to compare the preliminary clinical outcomes and complications of proximal humeral fractures treated with either ALPS or the proximal humeral internal locking system (PHILOS) in Asian patients in Taiwan. METHODS: Between January 2016 and December 2018, 66 patients with displaced proximal humeral fractures were analyzed retrospectively, of whom 31 underwent ALPS implant treatment and 35 underwent PHILOS implant treatment. Intraoperative blood loss and operation time, postoperative Constant-Murley Shoulder Outcome (Constant-Murley) score, and complications variables were recorded for the comparison. All cases were regularly followed up for at least 1 year. RESULTS: The mean follow-up period was 400.8 days (range, 367-446 days). Union was achieved in 98.5% of patients (65/66). The ALPS group yielded similar radiologic and clinical outcomes to the PHILOS plating group for treating displaced proximal humeral fractures, including operation time, intraoperative blood loss, the Constant-Murley score, and varus malunion (P > 0.05, respectively). However, the incidence of total postoperative complications in the ALPS group was significantly lower than in the PHILOS group (P < 0.05). There was a trend of a lower complication rate of screws/pegs protrusion, avascular necrosis, subacromial impingement, postoperative infection, and reoperation in the ALPS group, although it was not statistically significant (P > 0.05, respectively). CONCLUSION: The ALPS group yielded similar radiologic and clinical outcomes to the PHILOS plating group for displaced proximal humeral fractures, but the ALPS group had a significantly lower total rate of complications. Therefore, ALPS may be a better option for treating proximal humeral fractures. Further larger clinical studies are needed to confirm the findings presented here. TRIAL REGISTRATION: Retrospective study.

The novel application of cordycepin in maintaining stem cell pluripotency and increasing iPS cell generation efficiency.

Maintaining the pluripotency of either embryonic stem (ES) cells or induced pluripotent stem (iPS) cells is a fundamental part of stem cell research. In this study, we reported that cordycepin promoted the expression of pluripotency markers in ES and iPS cells. ES cells treated with cordycepin demonstrated their potential for generating embryoid bodies and differentiating into all three germ layers. The expression levels of phospho-Jak2, phospho-Stat3, integrin αV, and integrin ß5 were increased after cordycepin treatment. Furthermore, the protein expression levels of IL-6 family proteins (IL-6, IL-11, LIF, oncostatin M (OSM), ciliary neurotrophic factor (CNTF)), and epidermal growth factor (EGF) were also upregulated after cordycepin treatment, but were restored after co-treatment with a Jak2 inhibitor (AG490). The gene expression levels of Yamanaka factors were upregulated in mouse embryonic fibroblasts (MEFs) after cordycepin treatment. Moreover, the generation efficiencies of iPS cells were elevated after cordycepin treatment. We found that iPS cells generated after cordycepin treatment, not only expressed pluripotency markers, but also showed the ability of differentiating into neuron stem/progenitor cells. Taken together, we demonstrated that cordycepin maintained the pluripotency of stem cells via regulation of extracellular matrix (ECM) and Jak2/Stat3 signaling pathway and improved the generation efficiency of iPSCs.