RESUMEN
Periodontal disease (PD) is a chronic destructive inflammatory disease of the tooth-supporting structures that leads to tooth loss at its advanced stages. Although the disease is initiated by a complex organization of oral microorganisms in the form of a plaque biofilm, it is the uncontrolled immune response to periodontal pathogens that fuels periodontal tissue destruction. IL-17A has been identified as a key cytokine in the pathogenesis of PD. Despite its well documented role in host defense against invading pathogens at oral barrier sites, IL-17A-mediated signaling can also lead to a detrimental inflammatory response, causing periodontal bone destruction. In this study, we developed a local sustained delivery system that restrains IL-17A hyperactivity in periodontal tissues by incorporating neutralizing anti-IL-17A Abs in poly(lactic-coglycolic) acid microparticles (MP). This formulation allowed for controlled release of anti-IL-17A in the periodontium of mice with ligature-induced PD. Local delivery of anti-IL-17A MP after murine PD induction inhibited alveolar bone loss and osteoclastic activity. The anti-IL-17A MP formulation also decreased expression of IL-6, an IL-17A target gene known to induce bone resorption in periodontal tissues. This study demonstrates proof of concept that local and sustained release of IL-17A Abs constitutes a promising therapeutic strategy for PD and may be applicable to other osteolytic bone diseases mediated by IL-17A-driven inflammation.
Asunto(s)
Pérdida de Hueso Alveolar/tratamiento farmacológico , Pérdida de Hueso Alveolar/inmunología , Anticuerpos Neutralizantes/administración & dosificación , Anticuerpos Neutralizantes/inmunología , Sistemas de Liberación de Medicamentos/métodos , Interleucina-17/inmunología , Periodontitis/tratamiento farmacológico , Periodontitis/inmunología , Animales , Cápsulas , Modelos Animales de Enfermedad , Composición de Medicamentos/métodos , Liberación de Fármacos , Masculino , Ratones , Ratones Endogámicos BALB C , Osteólisis/tratamiento farmacológico , Osteólisis/inmunología , Copolímero de Ácido Poliláctico-Ácido Poliglicólico/química , Resultado del TratamientoRESUMEN
For individuals who sustain devastating composite tissue loss, vascularized composite allotransplantation (VCA; e.g., hand and face transplantation) has the potential to restore appearance and function of the damaged tissues. As with solid organ transplantation, however, rejection must be controlled by multidrug systemic immunosuppression with substantial side effects. As an alternative therapeutic approach inspired by natural mechanisms the body uses to control inflammation, we developed a system to enrich regulatory T cells (Tregs) in an allograft. Microparticles were engineered to sustainably release TGF-ß1, IL-2, and rapamycin, to induce Treg differentiation from naïve T cells. In a rat hindlimb VCA model, local administration of this Treg-inducing system, referred to as TRI-MP, prolonged allograft survival indefinitely without long-term systemic immunosuppression. TRI-MP treatment reduced expression of inflammatory mediators and enhanced expression of Treg-associated cytokines in allograft tissue. TRI-MP also enriched Treg and reduced inflammatory Th1 populations in allograft draining lymph nodes. This local immunotherapy imparted systemic donor-specific tolerance in otherwise immunocompetent rats, as evidenced by acceptance of secondary skin grafts from the hindlimb donor strain and rejection of skin grafts from a third-party donor strain. Ultimately, this therapeutic approach may reduce, or even eliminate, the need for systemic immunosuppression in VCA or solid organ transplantation.
Asunto(s)
Micropartículas Derivadas de Células/metabolismo , Terapia de Inmunosupresión/métodos , Linfocitos T Reguladores/citología , Tolerancia al Trasplante/fisiología , Alotrasplante Compuesto Vascularizado/métodos , Animales , Citocinas/metabolismo , Sistemas de Liberación de Medicamentos , Inmunosupresores/metabolismo , RatasRESUMEN
PURPOSE OF REVIEW: Type 1 diabetes (T1D) can be managed by insulin replacement, but it is still associated with an increased risk of microvascular/cardiovascular complications. There is considerable interest in antigen-specific approaches for treating T1D due to their potential for a favorable risk-benefit ratio relative to non-specific immune-based treatments. Here we review recent antigen-specific tolerance approaches using auto-antigen and/or immunomodulatory agents in NOD mice and provide insight into seemingly contradictory findings. RECENT FINDINGS: Although delivery of auto-antigen alone can prevent T1D in NOD mice, this approach may be prone to inconsistent results and has not demonstrated an ability to reverse established T1D. Conversely, several approaches that promote presentation of auto-antigen in a tolerogenic context through cell/tissue targeting, delivery system properties, or the delivery of immunomodulatory agents have had success in reversing recent-onset T1D in NOD mice. While initial auto-antigen based approaches were unable to substantially influence T1D progression clinically, recent antigen-specific approaches have promising potential.
Asunto(s)
Diabetes Mellitus Tipo 1 , Tolerancia Inmunológica , Animales , Antígenos , Diabetes Mellitus Tipo 1/tratamiento farmacológico , Humanos , Insulina , Ratones , Ratones Endogámicos NOD , Linfocitos T ReguladoresRESUMEN
The original version of this article unfortunately contained a mistake.
RESUMEN
Bioreactors are systems that can be used to monitor the response of tissues and cells to candidate drugs. Building on the experience developed in the creation of an osteochondral bioreactor, we have designed a new 3D printed system, which allows optical access to the cells throughout testing for in line monitoring. Because of the use of 3D printing, the fluidics could be developed in the third dimension, thus maintaining the footprint of a single well of a typical 96 well plate. This new design was optimized to achieve the maximum fluid transport through the central chamber, which corresponds to optimal nutrient or drug exposure. This optimization was achieved by altering each dimension of the bioreactor fluid path. A physical model for optimized drug exposure was then created and tested.
Asunto(s)
Reactores Biológicos , Evaluación Preclínica de Medicamentos/instrumentación , Evaluación Preclínica de Medicamentos/métodos , Osteoartritis/tratamiento farmacológico , Ingeniería de Tejidos/instrumentación , Diseño de Equipo , Humanos , Hidrodinámica , Modelos Teóricos , Impresión Tridimensional , Programas Informáticos , Ingeniería de Tejidos/métodosRESUMEN
The aqueous nature of complex coacervates provides a biologically-relevant context for various therapeutic applications. In this sense, biological applications demand a corresponding level of biocompatibility from the polyelectrolytes that participate in complex coacervation. Continued development with naturally-occurring polyelectrolytes such as heparin and chitosan underscore such aims. Herein, we design a synthetic polycation, in which betaine is conjugated to a biodegradable polyester backbone. Betaine is a naturally-occurring methylated amino acid that is ubiquitously present in human plasma. Inspired by its vast range of benefits - including but not limited to anti-inflammation, anti-cancer, anti-bacterial, anti-oxidant, protein stabilization, and cardiovascular health - we aim to impart additional functionality to a polycation for eventual use in a complex coacervate with heparin. We report on its in vitro and in vivo biocompatibility, in vitro and in vivo effect on angiogenesis, in vitro effect on microbial growth, and ability to form complex coacervates with heparin.
Asunto(s)
Betaína/química , Materiales Biocompatibles/química , Poliaminas/química , Animales , Materiales Biocompatibles/farmacología , Materiales Biocompatibles/toxicidad , Concentración de Iones de Hidrógeno , Ratones , Células 3T3 NIH , Neovascularización Fisiológica/efectos de los fármacos , Poliaminas/farmacología , Poliaminas/toxicidad , Polielectrolitos , Ratas , Staphylococcus aureus/efectos de los fármacos , Electricidad EstáticaRESUMEN
The hallmark of periodontal disease is the progressive destruction of gingival soft tissue and alveolar bone, which is initiated by inflammation in response to an invasive and persistent bacterial insult. In recent years, it has become apparent that this tissue destruction is associated with a decrease in local regulatory processes, including a decrease of forkhead box P3-expressing regulatory lymphocytes. Accordingly, we developed a controlled release system capable of generating a steady release of a known chemoattractant for regulatory lymphocytes, C-C motif chemokine ligand 22 (CCL22), composed of a degradable polymer with a proven track record of clinical translation, poly(lactic-co-glycolic) acid. We have previously shown that this sustained presentation of CCL22 from a point source effectively recruits regulatory T cells (Tregs) to the site of injection. Following administration of the Treg-recruiting formulation to the gingivae in murine experimental periodontitis, we observed increases in hallmark Treg-associated anti-inflammatory molecules, a decrease of proinflammatory cytokines, and a marked reduction in alveolar bone resorption. Furthermore, application of the Treg-recruiting formulation (fabricated with human CCL22) in ligature-induced periodontitis in beagle dogs leads to reduced clinical measures of inflammation and less alveolar bone loss under severe inflammatory conditions in the presence of a diverse periodontopathogen milieu.
Asunto(s)
Pérdida de Hueso Alveolar/inmunología , Pérdida de Hueso Alveolar/prevención & control , Quimiocina CCL22/farmacología , Sistemas de Liberación de Medicamentos/métodos , Periodontitis/complicaciones , Linfocitos T Reguladores/inmunología , Aggregatibacter actinomycetemcomitans/efectos de los fármacos , Pérdida de Hueso Alveolar/etiología , Animales , Quimiocina CCL22/administración & dosificación , Preparaciones de Acción Retardada/farmacología , Perros , Ácido Láctico , Ratones , Periodontitis/microbiología , Ácido Poliglicólico , Copolímero de Ácido Poliláctico-Ácido Poliglicólico , Porphyromonas gingivalis/efectos de los fármacosRESUMEN
Despite decades of advances in transplant immunology, tissue damage caused by acute allograft rejection remains the primary cause of morbidity and mortality in the transplant recipient. Moreover, the long-term sequelae of lifelong immunosuppression leaves patients at risk for developing a host of other deleterious conditions. Controlled drug delivery using micro- and nanoparticles (MNPs) is an effective way to deliver higher local doses of a given drug to specific tissues and cells while mitigating systemic effects. Herein, we review several descriptions of MNP immunotherapies aimed at prolonging allograft survival. We also discuss developments in the field of biomimetic drug delivery that use MNP constructs to induce and recruit our bodies' own suppressive immune cells. Finally, we comment on the regulatory pathway associated with these drug delivery systems. Collectively, it is our hope the studies described in this review will help to usher in a new era of immunotherapy in organ transplantation.
Asunto(s)
Sistemas de Liberación de Medicamentos/métodos , Rechazo de Injerto/prevención & control , Supervivencia de Injerto/efectos de los fármacos , Inmunosupresores/uso terapéutico , Nanopartículas/uso terapéutico , Células Presentadoras de Antígenos/inmunología , Antimetabolitos/uso terapéutico , Rechazo de Injerto/inmunología , Supervivencia de Injerto/inmunología , Humanos , Terapia de Inmunosupresión/métodos , Inmunoterapia/métodos , Linfocitos T Reguladores/inmunología , Tolerancia al Trasplante/inmunologíaRESUMEN
Particle-based crystals have been explored in the literature for applications in molecular electronics, photonics, sensors, and drug delivery. However, much of the research on these crystals has been focused on particles of nano- and submicrometer dimensions (so-called colloidal crystals) with limited attention directed toward building blocks with dimensions ranging from tens to hundreds of micrometers. This can be attributed, in part, to the fact that the underlying thermal effects in these larger systems typically cannot naturally overcome kinetic barriers at the meso- and macroscales so that many of the methods used for nanoscale particle assembly cannot be directly applied to larger components, as they become kinetically arrested in nonequilibrium states. In this work, ultrasonic agitation is being explored as a means of allowing large, non-Brownian microparticles (18-750 µm) to overcome the kinetic barriers to packing in the creation of close-packed, highly ordered, crystalline structures. In addition, we study how the energy input affects bulk particle behavior and describe several new ways to characterize particle-based crystals made from microparticles.
Asunto(s)
Poliestirenos/química , Coloides , Cristalización , Cinética , Tamaño de la Partícula , Sonicación , Propiedades de Superficie , TermodinámicaRESUMEN
Colloidal crystals are interesting materials owing to their customizable photonic properties, high surface area, and analogy to chemical structures. The flexibility of these materials has been greatly enhanced through mixing particles with varying sizes, compositions, and surface charges. In this way, distinctive patterns or analogies to chemical stoichiometries are produced; however, to date, this body of research is limited to particles with nanoscale dimensions. A simple method is now presented for bottom-up assembly of non-Brownian particle mixtures to create a new class of hierarchically-ordered materials that mimic those found in nature (both in pore distribution as well as stoichiometry). Additionally, these crystals serve as a template to create particle-based inverted crystalline structures with customizable properties.
RESUMEN
Although approved by the U.S. Food and Drug Administration, enfuvirtide is rarely used in combination antiretroviral therapies (cART) to treat HIV-1 infection, primarily because of its intense dosing schedule that requires twice-daily subcutaneous injection. Here, we describe the development of enfuvirtide-loaded, degradable poly(lactic-co-glycolic) acid microparticles that provide linear in vitro release of the drug over an 18-day period. This sustained-release formulation could make enfuvirtide more attractive for use in cART.
Asunto(s)
Proteína gp41 de Envoltorio del VIH/administración & dosificación , Inhibidores de Fusión de VIH/administración & dosificación , Fragmentos de Péptidos/administración & dosificación , Micropartículas Derivadas de Células/ultraestructura , Preparaciones de Acción Retardada , Enfuvirtida , Infecciones por VIH/tratamiento farmacológico , VIH-1/efectos de los fármacos , Humanos , Técnicas In Vitro , Microscopía Confocal , Microscopía Electrónica de RastreoRESUMEN
Treatment of glaucoma by intraocular pressure (IOP) reduction is typically accomplished through the administration of eye drops, the difficult and frequent nature of which contributes to extremely low adherence rates. Poor adherence to topical treatment regimens in glaucoma patients can lead to irreversible vision loss and increased treatment costs. Currently there are no approved treatments for glaucoma that address the inherent inefficiencies in drug delivery and patient adherence. Brimonidine tartrate (BT), a common glaucoma medication, requires dosing every 8-12 h, with up to 97% of patients not taking it as prescribed. This study provides proof-of-principle testing of a controlled release BT formulation. BT was encapsulated in poly(lactic-co-glycolic) acid microspheres and drug release was quantified using UV-Vis spectroscopy. For in vivo studies, rabbits were randomized to receive a single subconjunctival injection of blank (no drug) or BT-loaded microspheres or twice daily topical 0.2% BT drops. The microspheres released an average of 2.1 ± 0.37 µg BT/mg microspheres/day in vitro. In vivo, the percent decrease in IOP from baseline was significantly greater in the treated eye for both topical drug and drug-loaded microspheres versus blank microspheres throughout the 4-week study, with no evidence of migration or foreign body response. IOP measurements in the contralateral, untreated eyes also suggested a highly localized effect from the experimental treatment. A treatment designed using the release systems described in this study would represent a vast improvement over the current clinical standard of 56-84 topical doses over 28 days.
Asunto(s)
Antihipertensivos/farmacología , Sistemas de Liberación de Medicamentos/métodos , Presión Intraocular/efectos de los fármacos , Microesferas , Quinoxalinas/farmacología , Análisis de Varianza , Animales , Antihipertensivos/administración & dosificación , Tartrato de Brimonidina , Modelos Animales , Quinoxalinas/administración & dosificación , ConejosRESUMEN
As a means to stimulate wound healing, a hollow fiber membrane system might be placed within a wound bed to provide local and externally regulated controlled delivery of regenerative factors. After sufficient healing, it would be desirable to triggerably degrade these fibers as opposed to pulling them out. Accordingly, a series of enzymatically degradable thermoplastic elastomers was developed as potential hollow fiber base material. Polyurethane ureas (PUUs) were synthesized based on 1, 4-diisocyanatobutane, polycaprolactone (PCL) diol and polyethylene glycol (PEG) at different molar fractions as soft segments, and collagenase-sensitive peptide GGGLGPAGGK-NH2 as a chain extender (defined as PUU-CLxEGy-peptide, where x and y are the respective molar percents). In these polymers, PEG in the polymer backbone decreased tensile strengths and initial moduli of solvent-cast films in the wet state, while increasing water absorption. Collagenase degradation was observed at 75% relative PEG content in the soft segment. Control PUUs with putrescine or nonsense peptide chain extenders did not degrade acutely in collagenase. Conduits electrospun from PUU-CL25EG75-peptide and PUU-CL50EG50-peptide exhibited appropriate mechanical strength and sustained release of a model protein from the tube lumen for 7 days. Collapse of PUU-CL25EG75-peptide tubes occurred after collagenase degradation for 3 days. In conclusion, through molecular design, synthesis and characterization, a collagenase-labile PUU-CL25EG75-peptide polymer was identified that exhibited the desired traits of triggerable lability, processability, and the capacity to act as a membrane to facilitate controlled protein release.
Asunto(s)
Proteínas Bacterianas/química , Clostridium histolyticum/enzimología , Membranas Artificiales , Colagenasa Microbiana/química , Péptidos/química , Poliuretanos , Poliuretanos/síntesis química , Poliuretanos/químicaRESUMEN
Drug delivery strategies for local immunomodulation hold tremendous promise compared to current clinical gold-standard systemic immunosuppression as they could improve the benefit to risk ratio of life-saving or life-enhancing transplants. Such strategies have facilitated prolonged graft survival in animal models at lower drug doses while minimizing off-target effects. Despite the promising outcomes in preclinical animal studies, progression of these strategies to clinical trials has faced challenges. A comprehensive understanding of the translational barriers is a critical first step towards clinical validation of effective immunomodulatory drug delivery protocols proven for safety and tolerability in pre-clinical animal models. This review overviews the current state-of-the-art in local immunomodulatory strategies for transplantation and outlines the key challenges hindering their clinical translation.
RESUMEN
In the past several decades, polymeric microparticles (MPs) have emerged as viable solutions to address the limitations of standard pharmaceuticals and their corresponding delivery methods. While there are many preclinical studies that utilize polymeric MPs as a delivery vehicle, there are limited FDA-approved products. One potential barrier to the clinical translation of these technologies is a lack of understanding with regard to the manufacturing process, hindering batch scale-up. To address this knowledge gap, we sought to first identify critical processing parameters in the manufacturing process of blank (no therapeutic drug) and protein-loaded double-emulsion poly(lactic-co-glycolic) acid MPs through a quality by design approach. We then utilized the design of experiments as a tool to systematically investigate the impact of these parameters on critical quality attributes (e.g., size, surface morphology, release kinetics, inner occlusion size, etc.) of blank and protein-loaded MPs. Our results elucidate that some of the most significant CPPs impacting many CQAs of double-emulsion MPs are those within the primary or single-emulsion process (e.g., inner aqueous phase volume, solvent volume, etc.) and their interactions. Furthermore, our results indicate that microparticle internal structure (e.g., inner occlusion size, interconnectivity, etc.) can heavily influence protein release kinetics from double-emulsion MPs, suggesting it is a crucial CQA to understand. Altogether, this study identifies several important considerations in the manufacturing and characterization of double-emulsion MPs, potentially enhancing their translation.
RESUMEN
The shorter, the more dispersible: An iterative, emulsion-based shortening technique has been used to reduce the length of single-walled carbon nanotubes (SWNTs) to the same order of magnitude as their diameter (ca. 1â nm), thus achieving an effectively "zero-dimensional" structure with improved dispersibility and, after hydroxylation, long-term water solubility. Finally, zero-dimensional SWNTs were positively identified using mass spectrometry for the first time.
RESUMEN
The effect of sequence on copolymer properties is rarely studied despite the precedent from Nature that monomer order can create materials of significant diversity. Poly(lactic-co-glycolic acid) (PLGA), one of the most important biodegradable copolymers, is widely used in an unsequenced, random form for both drug delivery microparticles and tissue engineering matrices. Sequenced PLGA copolymers have been synthesized and fabricated into microparticles to study how their hydrolysis rates compare to those of random copolymers. Sequenced PLGA microparticles were found to degrade at slower, and often more constant, rates than random copolymers with the same lactic to glycolic acid ratios as demonstrated by molecular weight decrease, lactic acid release, and thermal property analyses. The impact of copolymer sequence on in vitro release was studied using PLGA microparticles loaded with model agent rhodamine-B. These assays established that copolymer sequence affects the rate of release and that a more gradual burst release can be achieved using sequenced copolymers compared to a random control.
Asunto(s)
Materiales Biocompatibles/química , Portadores de Fármacos/química , Ácido Láctico/química , Ácido Poliglicólico/química , Cápsulas , Portadores de Fármacos/síntesis química , Hidrólisis , Ácido Láctico/síntesis química , Ácido Láctico/metabolismo , Ácido Poliglicólico/síntesis química , Copolímero de Ácido Poliláctico-Ácido Poliglicólico , Rodaminas/química , Rodaminas/metabolismo , TemperaturaRESUMEN
The development and performance evaluation of new biodegradable polymer controlled release formulations relies on successful interpretation and evaluation of in vitro release data. However, depending upon the extent of empirical characterization, release data may be open to more than one qualitative interpretation. In this work, a predictive model for release from degradable polymer matrices was applied to a number of published release data in order to extend the characterization of release behavior. Where possible, the model was also used to interpolate and extrapolate upon collected released data to clarify the overall duration of release and also kinetics of release between widely spaced data points. In each case examined, mathematical predictions of release coincide well with experimental results, offering a more definitive description of each formulation's performance than was previously available. This information may prove particularly helpful in the design of future studies, such as when calculating proper dosing levels or determining experimental end points in order to more comprehensively evaluate a controlled release system's performance.
Asunto(s)
Sistemas de Liberación de Medicamentos , Ácido Láctico/química , Modelos Teóricos , Ácido Poliglicólico/química , Polímeros/química , Superóxido Dismutasa/metabolismo , Micropartículas Derivadas de Células , Química Farmacéutica , Humanos , Cinética , Copolímero de Ácido Poliláctico-Ácido Poliglicólico , Estudios RetrospectivosRESUMEN
Controlled drug delivery is a valuable strategy for increasing local therapeutic concentrations in a sustained manner, particularly in locations that are difficult to access. One such target is the sinonasal mucosa, which can be chronically inflamed in patients with rhinitis or rhinosinusitis resulting in diminished quality of life, significant healthcare expenses, and multiple co-morbidities. While numerous medical therapies with daily administration are available, anatomical, physiological, and patient adherence barriers can limit their therapeutic efficacy. As such, there has been considerable development of biomaterial-based systems that can locally deliver anti-inflammatory, antibiotic, decongestant, and antihistamine medications over an extended duration. This review aims to highlight advances in such biomaterial-based systems for sinonasal delivery. Delivery vehicles including nasal packs, dressings, sinus stents, polymeric meshes, nanoparticles, microparticles, and in situ hydrogels are reviewed. Benefits of these vehicles are discussed, as well as their limitations, which, recently, has motivated the development of combination systems that leverage desirable properties of their individual components to enhance therapeutic delivery. Finally, discussion is provided on the potential of combination delivery vehicles, which can provide greater control of the duration of therapeutic release, as well as the ability to encapsulate multiple therapies, provide mechanical support, or conform to the mucosa. The future clinical use of controlled release systems with these attributes could have a transformative impact on improving treatment of difficult-to-control chronic diseases of the sinonasal mucosa.
Asunto(s)
Rinitis , Sinusitis , Materiales Biocompatibles/uso terapéutico , Enfermedad Crónica , Humanos , Membrana Mucosa , Mucosa Nasal , Calidad de Vida , Rinitis/tratamiento farmacológico , Sinusitis/tratamiento farmacológicoRESUMEN
Particles synthesized from biodegradable polymers hold great potential as controlled drug delivery systems. Continuous flow platforms based on microfluidics offer attractive advantages over conventional batch-emulsification techniques for the scalable fabrication of drug-loaded particles with controlled physicochemical properties. However, widespread utilization of microfluidic technologies for the manufacturing of drug-loaded particles has been hindered largely by the lack of practical guidelines toward cost-effective development and reliable operation of microfluidic systems. Here, we present a framework for rational design and construction of microfluidic systems using commercially available components for high-throughput production of uniform biodegradable particles encapsulating drugs. We also demonstrate successful implementation of this framework to devise a robust microfluidic system that is capable of producing drug-carrying particles with desired characteristics. The guidelines provided in this study will likely help broaden the applicability of microfluidic technologies for the synthesis of high-quality, drug-loaded biodegradable particles.