A first-principles study of the BC3N2 monolayer and a BC3N2/graphene heterostructure as promising anode materials for sodium-ion batteries.

High-performance sodium-ion batteries (SIBs) require anode materials with high capacity and fast kinetics. Based on first-principles calculations, we propose BC3N2 and BC3N2/graphene (B/G) heterostructure as potential SIB anode materials. The BC3N2 monolayer exhibits intrinsic metallic behavior. In addition, BC3N2 possesses a low Na+ diffusion barrier (0.15 eV), a high storage capacity (777 mA h g-1), a low open-circuit voltage (0.72 V), and a tiny axial expansion (0.36%). Compared with the BC3N2 monolayer, the B/G heterostructure exhibits a lower diffusion barrier of 0.027 eV, suggesting a much faster diffusion. More importantly, although the B/G heterostructure possesses heavier molar weight, its theoretical capacity (689 mA h g-1) is comparable to that of the BC3N2 monolayer. Based on the above-mentioned properties, we hope both the BC3N2 monolayer and the B/G heterostructure would be promising anodes for SIBs.

Two-dimensional graphene+ as an anode material for calcium-ion batteries with ultra-high capacity: a first-principles study.

Multivalent-ion batteries have garnered significant attention due to their high energy density, low cost, and superior safety. Calcium-ion batteries (CIBs) are regarded as the next-generation energy storage systems for their abundant natural resources and bivalent characteristics. However, the absence of high-performance anode materials poses a significant obstacle to the progress of battery technology. Two-dimensional (2D) Dirac materials have excellent conductivity and abundant active sites, rendering them promising candidates as anode materials. A novel 2D Dirac material known as "graphene+" has been theoretically reported, exhibiting prominent properties including good stability, exceptional ductility, and remarkable electronic conductivity. By using first-principles calculations, we systematically investigate the performance of graphene+ as an anode material for CIBs. Graphene+ exhibits an ultra-high theoretical capacity (1487.7 mA h g-1), a small diffusion barrier (0.21 eV), and a low average open-circuit voltage (0.51 V). Furthermore, we investigate the impact of the electrolyte solvation on the performance of Ca-ion adsorption and migration. Upon contact with electrolyte solvents, graphene+ exhibits strong adsorption strength and rapid migration of Ca-ions on its surface. These results demonstrate the promising potential of graphene+ as a high-performance anode material for CIBs.

Two-dimensional monolayer C5-10-16: a metallic carbon allotrope as an anode material for high-performance sodium/potassium-ion batteries.

Carbonaceous materials are promising candidates as anode materials for non-lithium-ion batteries (NLIBs) due to their appealing properties such as good electrical conductivity, low cost, and high safety. However, graphene, a classic two-dimensional (2D) carbon material, is chemically inert to most metal atoms, hindering its application as an electrode material for metal-ion batteries. Inspired by the unique geometry of a four-penta unit, we explore a metallic 2D carbon allotrope C5-10-16 composed of 5-10-16 carbon rings. The C5-10-16 monolayer is free from any imaginary frequencies in the whole Brillouin zone. Due to the introduction of a non-sp2 hybridization state into C5-10-16, the extended conjugation of π-electrons is disrupted, leading to the enhanced surface activity toward metal ions. We investigate the performance of C5-10-16 as the anode for sodium/potassium-ion batteries by using first-principles calculations. The C5-10-16 sheet has high theoretical specific capacities of Na (850.84 mA h g-1) and K (743.87 mA h g-1). Besides, C5-10-16 exhibits a moderate migration barrier of 0.63 (0.32) eV for Na (K), ensuring rapid charging/discharging processes. The average open-circuit voltages of Na and K are 0.33 and 0.62 V, respectively, which are within the voltage acceptance range of anode materials. The fully sodiated (potassiated) C5-10-16 shows tiny lattice expansions of 1.4% (1.3%), suggesting the good reversibility. Moreover, bilayer C5-10-16 significantly affects both the adsorption strength and the mobility of Na or K. All these results show that C5-10-16 could be used as a promising anode material for NLIBs.

The effect of miR-381 on proliferation and prognosis of breast cancer by altering CCNA2 expression.

BACKGROUND: MiR-381 can regulate the expression of cyclin A2 (CCNA2) to inhibit the proliferation and migration of bladder cancer cells, but whether miR-381 has the same function in breast cancer is not well know. METHODS: The over express or silence miR-381 expressing cell lines were constructed by lentivirus infection to reveal the biological functions of miR-381 in vitro. The expression of miR-381 and CCNA2 in 162 breast cancer patients were detected to further reveal their impact and predictive value on progression-free survival (PFS) and overall survival (OS). RESULTS: After transfection of MDA-MB-231 and MCF-7 cells with miR-381 mimics, the expression of miR-381 was effectively up-regulated and CCNA2 was effectively down-regulated, while the opposite results were observed in tumour cell which transfected with miR-381 inhibitors. After transfection of cell lines with miR-381 mimics, tumour cell activity was significantly reduced, while the opposite results were observed in tumour cell which transfected with miR-381 inhibitors. The area under curves (AUCs) of miRNA-381 and CCNA2 for predicting PFS and OS were 0.711, 0.695, 0.694 and 0.675 respectively. Cox regression analysis showed that miRNA-381 ≥ 1.65 2-ΔΔCt and CCNA ≥ 2.95 2-ΔΔCt were the influence factors of PFS and OS, the hazard ratio (HR) values were 0.553, 2.075, 0.462 and 2.089, respectively. CONCLUSION: miR-381 inhibitors breast cancer cells proliferation and migration by down-regulating the expression of CCNA2, both of them can predict the prognosis of breast cancer.

miR-381 can regulate the expression of cyclin A2 and inhibit the proliferation and migration of bladder cancer cells, but whether miR-381 has the same function in breast cancer is not well know. We analysed the levels of miR-381 and cyclin A2 in breast cancer patients and breast cancer cells to reveal the mechanism of miR-381 affecting the expression of cyclin A2. We found miRNA-381 affects the proliferation and migration of breast cancer cells by down-regulating the expression of cyclin A2. The expression of serum miR-381 and cyclin A2 have important values in predicting the prognosis of breast cancer. Our findings provide mechanistic insights into how miR-381 regulates the proliferation and migration of breast cancer, as well as a new target for clinical treatment. Future research may focus on how to improve patient prognosis by up-regulating expression of miR-381 and down-regulating the expression of cyclin A2.

[Evaluation of nutritional value of Bambusae Concretio Silicea based on content of 15 amino acids].

The content of 15 total amino acids(TAAs) in Bambusae Concretio Silicea was determined by HPLC with phenyl-isothiocyanate(PITC) for pre-column derivatization. The results showed that the content of TAA was 0.61-12.25 mg·g~(-1), and aspartic acid(Asp), glutamic acid(Glu), proline(Pro), glycine(Gly), and valine(Val) were the top five amino acids in terms of the average content. The content of essential amino acids(EAAs), conditionally essential amino acids(CEAAs), non-essential amino acids(NEAAs), and medicinal amino acids(MAAs) was 0.24-4.75, 0.30-4.73, 0.40-7.50, and 0.36-6.51 mg·g~(-1), respectively. Among the delicious amino acids, sweet amino acids(SAA), bitter amino acids(BAA), fresh-taste amino acids(FAAs), and odourless amino acids(OAAs) had the content of 0.22-4.70, 0.19-4.03, 0.13-2.26, and 0.06-1.26 mg·g~(-1), respectively. The 21 batches of Bambusae Concretio Silicea samples presented the same composition but significant differences in the content of amino acids. Among the three producing areas, Guangdong was the area where the samples had the highest content of TAAs, EAAs, CEAAs, NEAAs, MAAs, and delicious amino acids. Furthermore, the ratio of amino acid(RAA), ratio coefficient of amino acid(RCAA), and score of ratio coefficient of amino acid(SRCAA) were calculated to evaluate the nutritional value of Bambusae Concretio Silicea. The results showed that the Bambusae Concretio Silicea samples from Guangdong had better nutritional value. The nutritional value evaluation based on the content of 15 amino acids was proposed to provide data support for the quality grading of Bambusae Concretio Silicea and lay a foundation for the development and utilization of the medicinal material resources.

Monolayer α-beryllene as an anode material for magnesium ion batteries with high capacity and low diffusion energy barrier.

High specific capacity and fast charge/discharge rate are important indicators for the development of next-generation ion batteries. Compared with conventional monovalent ion batteries like lithium-ion batteries and sodium-ion batteries, multivalent ion batteries have attracted extensive attention owing to their high energy densities. Here, we systematically explore the interactions between Mg atoms and α-beryllene monolayers by means of density functional theory calculations. Mg atoms can be adsorbed stably on α-beryllene monolayers with the adsorption energy of -0.24 eV. The low diffusion energy barriers (0.099/0.101 eV) indicate the rapid mobility of Mg during the charge/discharge process. Moreover, the α-beryllene monolayer exhibits an ultra-high theoretical specific capacity of 5956 mA h g-1 for Mg, a low average open-circuit voltage of 0.24 V, and a tiny volume change of -1.08%. Finally, the constructed h-BN/α-beryllene heterostructure shows that h-BN can serve as a protective cover to preserve pristine α-beryllene in respect of metallicity, Mg adsorption capability, and fast ionic mobility. The above mentioned outstanding results make α-beryllene a promising anode material for magnesium-ion batteries.

Giant tunneling electroresistance in a 2D bilayer-In2Se3-based out-of-plane ferroelectric tunnel junction.

Ferroelectric tunnel junctions (FTJs) have great potential in nonvolatile memory devices and have been extensively studied in recent years. Compared with conventional FTJs based on perovskite-type oxide materials as the barrier layer, two-dimensional (2D) van der Waals ferroelectric materials are advantageous in improving the performance of FTJs and achieving miniaturization of FTJ devices due to the features such as atomic thickness and ideal interfaces. In this work, we present a 2D out-of-plane ferroelectric tunnel junction (FTJ) constructed using graphene and bilayer-In2Se3. Using density functional calculations combined with the nonequilibrium Green's function technique, we investigate the electron transport properties in the graphene/bilayer-In2Se3 (BIS) vdW FTJ. Our calculations show that the FTJ we constructed can be switched from ferroelectric to antiferroelectric by changing the relative dipole arrangement of the BIS to form multiple nonvolatile resistance states. Since the charge transfer between the layers varies for the four different polarization states, the TER ratios range from 103% to 1010%. The giant tunneling electroresistance and multiple resistance states in the 2D BIS-based FTJ suggest that it has great potential for application in nanoscale nonvolatile ferroelectric memory devices.

Momentum matching induced giant magnetoresistance in two-dimensional magnetic tunnel junctions.

Giant magnetoresistance was first experimentally discovered in three-dimensional magnetic tunnel junctions (MTJs) in the late 1980s and is of great importance in nonvolatile memory applications. How to achieve a magnetoresistance as large as possible is always a central task in the study of MTJs. However, it is normally only of the order of magnitude of tens of percent in traditional MTJs. The ideal situation is the metal-insulator transition together with the magnetization reversal of one magnetic lead. In this work, we will show that this can be achieved using a two-dimensional ferromagnetic zigzag SiC nanoribbon junction based on quantum transport calculations performed with a combination of density functional theory and non-equilibrium Green's function. Specifically, with the magnetization configuration switching of the two leads from parallel to anti-parallel, the junction will change abruptly from a conducting state to an insulating state, although the two leads are always metallic, with both spin up and spin down channels crossing the Fermi level simultaneously. Extensive analysis indicates that the insulating state in the anti-parallel magnetic configuration originates not from any present mechanisms that cause full suppression of electron transmission but from momentum direction mismatching. This finding suggests a fantastic mechanism for achieving magnetoresistance or electrical switching in nanoscale devices by manipulating band dispersion.

THFS-carbon: a theoretical prediction of metallic carbon allotrope with half-auxeticity, planar tetracoordinate carbon, and potential application as anode for sodium-ion batteries.

Two-dimensional (2D) carbon materials integrated with planar tetracoordinate carbon (ptC) and negative Poisson's ratio (NPR) provide a cornerstone for constructing multifunctional energy-storage devices. As a typical 2D carbon material, the pristine graphene is chemically inert, hindering its application in metal-ion batteries. Introducing the ptC in graphene can break the extended conjugation of π-electrons and lead to an enhanced surface reactivity. Inspired by the unique geometry of [4.6.4.6] fenestrane skeleton with ptC, we theoretically design a ptC-containing 2D carbon allotrope, namely THFS-carbon. It is intrinsically metallic with excellent dynamical, thermal, and mechanical stabilities. The Young's modulus along the x direction (311.37 N m-1) is comparable to that of graphene. Intriguingly, THFS-carbon possesses an in-plane half-NPR distinct from most other 2D crystals. As a promising anode for sodium-ion batteries, THFS-carbon delivers an ultra-high theoretical storage capacity (2233 mA h g-1), a low diffusion energy barrier (0.03-0.05 eV), a low open-circuit voltage (0.14-0.40 V), and a good reversibility for Na insertion/extraction.

Two-dimensional TiCl2: a high-performance anode material for Na-ion batteries with high capacity and fast diffusion.

Na-ion batteries (NIBs) have attracted a great deal of attention for large-scale electric energy storage due to their inherent safety, natural abundant resources, and low cost. The exploration of suitable anode materials is the major challenge in advancing NIB technology. On the basis of first-principles calculations, we systematically explore the potential performance of two-dimensional (2D) TiCl2 as an electrode material for NIBs. Monolayer TiCl2 can be easily exfoliated from the bulk structure with a small exfoliation energy of 0.64 J m-2. It shows good stability, as demonstrated by its high cohesive energy, positive phonon modes, and high thermal stability. Monolayer TiCl2 has high storage capacity (451.3 mA h g-1), low diffusion energy barrier (0.02-0.14 eV), moderate average open-circuit voltage (0.81 V), and small lattice change (2.37%). Moreover, bilayer TiCl2 can significantly enhance the Na adsorption strength but reduce the Na-ion diffusion ability. These results suggest that TiCl2 is a promising anode candidate for NIBs.

Penta-SiCN monolayer as a well-balanced performance anode material for Li-ion batteries.

Lithium-ion batteries (LIBs) remain irreplaceable for clean energy storage applications. The intrinsic metallic nature of penta-SiCN ensures its promising application in the electrodes of LIBs. Using first-principles calculations, we evaluate the performance of the intrinsic metallic penta-SiCN monolayer as the anode material for LIBs. Penta-SiCN exhibits a low diffusion energy barrier (0.107 eV) for Li atom migration on Si18C18N18, while the diffusion energy barrier for vacancy migration on Li17Si18C18N18 is only 0.006 eV. Additionally, penta-SiCN possesses a high theoretical capacity of 1485.98 mA h g-1, average open-circuit voltage of 0.97 V, and small volume expansion of 1%. Remarkably, penta-SiCN exhibits robust wettability towards the electrolytes (solvent molecules and metal salts) widely used in commercial LIBs, indicating the excellent compatibility in electrode applications. These intriguing theoretical findings make penta-SiCN a high performance anode material for LIBs.

Two-dimensional AlB4/Al2B2: high-performance Dirac anode materials for sodium-ion batteries.

Sodium-ion batteries (SIBs) have attracted much attention due to their abundant earth-reserves and low cost. Two-dimensional (2D) Dirac materials show great application prospects as anodes for SIBs because of their excellent electronic conductivity. We explore the performances of AlB4 (Al2B2) monolayers and bilayers as anodes for SIBs by using first-principles calculations. The AlB4 (Al2B2) monolayer exhibits a high theoretical storage capacity of 954.15 (709.17) mA h g-1 and a low diffusion barrier of 0.36 (0.03) eV. The calculated average open-circuit voltage (0.68/0.18 V) falls within the acceptance range of 0.1-1.0 V for anode materials. The fully sodiated AlB4 (Al2B2) monolayer shows a tiny lattice expansion of 0.9% (2.4%), suggesting good reversibility. Furthermore, in comparison with the AlB4 (Al2B2) monolayer, the AlB4 (Al2B2) bilayer can provide stronger binding with Na on the outside surface. These results contribute to a better understanding of the AlB4 (Al2B2) monolayers and bilayers as potential high-performance anode materials for SIBs.

[Textual research on Bambusae Concretio Silicea].

By studying various ancient texts such as herbal classics and medical literature from different eras, it was found that there were discrepancies in the records about Bambusae Concretio Silicea(Tian Zhu Huang). In order to establish an accurate foundation, this research was based on ancient herbal literature and combined with plant morphology and investigative studies to examine its earliest mentions in ancient texts, nomenclature, medicinal properties, indications, and quality assessment standards. In the early records, Bambusae Concretio Silicea was referred to by several different names, such as "Zhu Huang" "Tian Zhu Huang" "Zhu Gao" "Zhu Tang", and "Zhu Huang". The earliest known formal usage of the name "Tian Zhu Huang" was found in the book Ri Hua-zi's Materia Medica(Ri Hua Zi Ben Cao). Throughout various ancient texts, the earliest recorded information about Bambusae Concretio Silicea also appeared in Ri Hua-zi's Materia Medica, not in Materia Medica of Sichuan(Shu Ben Cao) or other ancient texts. Ri Hua-zi's Materia Medica provided relevant descriptions of its origin, medicinal properties, and indications, albeit with some errors due to limited knowledge. However, this has been a valuable starting point for future research on Bambusae Concretio Silicea and holds pioneering significance in forming a mature system. As the research delved deeper, the medicinal properties of Bambusae Concretio Silicea have been consistent since Ri Hua-zi's Materia Medica, and the understanding has gradually improved through years of clinical verification. During the investigation process, the authors found limited records on the quality evaluation of Bambusae Concretio Silicea in ancient texts. Although the information is scarce, it serves as a foundational basis for establishing corresponding quality grading standards for Bambusae Concretio Silicea in the future.

[Effect of origin, tree age, and harvesting time on content of flavonoids and terpene lactones in Ginkgo Folium].

The content of total flavonol glycosides in Ginkgo Folium in the planting bases was determined by high performance liquid chromatography(HPLC).The samples were extracted by reflux with methanol-25% hydrochloric acid.The HPLC conditions were as follows: Agilent ZORBAX SB-C_(18) column(4.6 mm×250 mm, 5 µm), isocratic elution with mobile phase of 0.4% phosphoric acid solution-methanol(45∶55), flow rate of 1 mL·min~(-1), column temperature of 30 ℃, detection wavelength of 360 nm, and injection vo-lume of 10 µL.A method for the determination of terpene lactones in Ginkgo Folium was established based on ultra-high performance liquid chromatograph-triple-quadrupole/linear ion-trap tandem mass spectrometry(UPLC-QTRAP-MS/MS).The UPLC conditions were as below: gradient elution with acetonitrile-0.1% formic acid, flow rate of 0.2 mL·min~(-1), column temperature of 30 ℃, sample chamber temperature of 10 ℃, and injection volume of 10 µL.The ESI~+and multiple reaction monitoring(MRM) were adopted for the MS.The above methods were used to determine the content of total flavonol glycosides and terpene lactones in 99 batches of Ginkgo Folium from 6 planting bases, and the results were statistically analyzed.The content of flavonoids and terpene lactones in Ginkgo Folium from different origins, from trees of different ages, harvested at different time, from trees of different genders, and processed with different methods was compared.The results showed that the content of total flavonol glucosides in 99 Ginkgo Folium samples ranged from 0.38% to 2.08%, and the total content of the four terpene lactones was in the range of 0.03%-0.87%.The method established in this study is simple and reliable, which can be used for the quantitative analysis of Ginkgo Folium.The research results lay a basis for the quality control of Ginkgo Folium.

Metallic two-dimensional BP2: a high-performance electrode material for Li- and Na-ion batteries.

Searching for high-performance electrode materials is an important topic in rechargeable batteries. Using first-principles calculations, we systematically explore the potential application of a two-dimensional BP2 monolayer as a cathode material for Li-ion and Na-ion batteries. The pristine BP2 monolayer exhibits metallic characteristics, which facilitate the transportation of electrons. The Li and Na atoms bind strongly to the BP2 monolayer, indicating a good structural stability. Furthermore, the geometrical structure of BP2 is well maintained during the adsorption process. The Li and Na ions prefer to move along the zigzag direction with relatively low energy barriers. Especially, the ultralow Na diffusion barrier (0.03 eV) implies that monolayer BP2 has an excellent charge/discharge capability. The specific capacity and average electrode potential of Li (Na) are 619.45 (279.93) mA h g-1 and 2.89 (2.49) V, respectively. These results reveal that the BP2 monolayer is an appealing cathode material for alkali-metal batteries.

Graphether: a reversible and high-capacity anode material for sodium-ion batteries with ultrafast directional Na-ion diffusion.

Sodium-ion batteries (SIBs) have been attracting great attention as the most promising alternative to lithium-ion batteries (LIBs) for large-scale energy storage. However, the absence of suitable anode materials is the main bottleneck for the commercial application of SIBs. Herein, the adsorption and diffusion behaviors of Na on graphether are predicted by first-principles density functional calculations. Our results show that Na atoms can be adsorbed on graphether forming a uniform and stable coverage on both sides. Even at low intercalated Na concentrations, the semiconducting graphether can be changed to a metallic state, ensuring good electrical conductivity. Due to the structural anisotropy of graphether, the Na+ ions show a remarkable one-dimensional diffusion with an ultralow energy barrier of 0.04 eV, suggesting ultrafast charge/discharge characteristics. The graphether monolayer has a high theoretical specific capacity of 670 mA h g-1, which is much higher than commercial graphite anode materials. Furthermore, the average voltage is 1.58 V, comparable with that of commercial TiO2 anode materials for LIBs (1.5 V). During the charge/discharge process, graphether could mostly preserve the structural integrity upon the adsorption of Na even at the maximum concentration, suggesting its good reversibility. All these results show that graphether is a promising anode material for high-performance SIBs.

[Determination of caffeine content in Ginkgo Folium by ultra high performance liquid chromatography-triple quadrupole mass spectrometry].

In this experiment, an ultra-high performance liquid chromatographytandem triple quadrupole mass spectrometry was established for the determination of caffeine in commercially available Ginkgo Folium. The samples were extracted by ultrasonic method with methanol, and separated on Waters CORTECS T3 column(2.1 mm×100 mm, 2.7 µm), with mobile phase of 0.1% formic acid solution-0.1% formic acid acetonitrile solution for gradient elution, at flow rate of 0.3 mL·min~(-1); column temperature of 30 ℃, and injection volume of 2 µL. Mass spectrometry was conducted at ESI~+ multiple reaction monitoring(MRM) mode; quantitative analysis was conducted with external standard method. The results showed that in the range of 0.099 6-9.96 ng·mL~(-1), there was a good linear relationship between the mass concentration of caffeine and the peak area, R~2=0.999; the average recovery was 84.51%, with RSD of 6.2%. The results of precision, repeatability and stability showed that the RSD was 5.1%, 5.9%, 7.2%, respectively. The content range of caffeine in 10 batches of Ginkgo Folium was 1.52-60.86 µg·kg~(-1). In conclusion, this method is accurate, reliable and reproducible, which provides a reference for the safety study of Ginkgo Folium.

Two-dimensional CaFCl: ultra-wide bandgap, strong interlayer quantum confinement, and n-type doping.

Two-dimensional (2D) ultra-wide bandgap (UWBG) semiconductors have attracted tremendous attention because of their unique electronic properties and promising applications. Using first-principles calculations, monolayer (bilayer) CaFCl has a cleavage energy of 0.93 J m-2 (0.72 J m-2), suggesting that the exfoliation of monolayer and few-layer materials from the bulk phase could be feasible. The CaFCl monolayer is an UWBG semiconductor with a direct bandgap of 6.62 eV. In addition to the dynamic and thermodynamic stability, it can remain thermally stable at 2200 K, suitable for operation in high-temperature environments. The bandgap of monolayer CaFCl can be tuned by external strain and layer thickness. The decrease of the layer thickness leads to not only a bandgap increase but also an indirect-to-direct bandgap transition, suggesting a strong interlayer quantum confinement effect. Under biaxial strain, the direct bandgap can also be turned into an indirect one. The adsorption of a tetrathiafulvalene (TTF) molecule introduces deep donor states in the gap of CaFCl. Under an external electric field with direction from CaFCl to TTF, the TTF-derived donor states move closer to the conduction band edge of CaFCl and then the adsorption complex becomes effectively n-doped. Furthermore, monolayer CaFCl exhibits pronounced optical absorption in the ultraviolet range of the solar spectrum. These results render CaFCl an attractive 2D material for applications in flexible nanoelectronic and optoelectronic devices.

[Diagnosis and treatment of 12 cases of sexual activity-related hematuria: Experience and literature review].

OBJECTIVE: To summarize and analyze the experience in the diagnosis and treatment of sexual activity-related hematuria. METHODS: A retrospective analysis was conducted on 12 cases of sexual activity-related hematuria treated in Changhai Hospital from October 2015 to April 2019. The patients ranged in age between 31 and 59 years, with a disease course of 2 weeks to 25 years, 6 complaining of urethral bleeding at penile erection and another 6 hematuria immediately after ejaculation, including 2 accompanied by hemospermia. All the patients underwent urethroscopy and cauterization of the lesioned urethral mucosa with the electric excision ring or holmium laser. In addition, one of the patients received seminal tract endoscopic exploration and seminal vesicle irrigation, and another one seminal tract endoscopy and transurethral resection of the prostate. RESULTS: All the patients were diagnosed with posterior urethral varicosity, one accompanied with bulbar and posterior urethral varicosity, one with seminal vesiculitis, and still another with BPH. The patients were followed up for 3－45 (mean 23.5) months, during which the symptoms of sexual activity-related hematuria disappeared in 11 cases, with smooth urination and no recurrence, and post-ejaculation hematuria developed in one case at 2 and 10 months postoperatively but never again thereafter. No complications, such as epididymitis, urethral stricture and ED, were observed in any of the patients. CONCLUSIONS: Urethral varicosity should be first considered in patients with painless hematuria immediately after penile erection or sexual activity though other conditions such as seminal vesicle bleeding can also be taken into account. Urethroscopy combined with seminal tract endoscopy is effective in the diagnosis and treatment of sexual activity-related hematuria.

[Correlation between chemical composition,ecological factors and soil factors of Chinese herbal medicine Daphnes Cortex].

In this paper, the correlation between the chemical constituents of Chinese herbal medicines Daphnes Cortex and the ecological factors and soil factors was studied, which provided a reference for the selection of suitable areas for artificial cultivation of Daphne giraldii and wild tending. The geographic information system(GIS) was applied to obtain the ecological factor information of 23 collection sites of Daphnes Cortex, and the soil factor information was determined by the standard procedure in the soil test standard manual. Combining the information of 93 chemical constituents of Daphnes Cortex in 23 collection sites the correlation between components and ecological factors and soil factors was analyzed by statistical methods. The correlation analysis showed that the longitude, annual average rainfall, annual sunshine intensity, annual average temperature in the ecological factors, soil type, effective copper and pH value were the dominant factors affecting the chemical composition of Daphnes Cortex.