Climatic and biotic factors influencing regional declines and recovery of tropical forest biomass from the 2015/16 El Niño.

The 2015/16 El Niño brought severe drought and record-breaking temperatures in the tropics. Here, using satellite-based L-band microwave vegetation optical depth, we mapped changes of above-ground biomass (AGB) during the drought and in subsequent years up to 2019. Over more than 60% of drought-affected intact forests, AGB reduced during the drought, except in the wettest part of the central Amazon, where it declined 1 y later. By the end of 2019, only 40% of AGB reduced intact forests had fully recovered to the predrought level. Using random-forest models, we found that the magnitude of AGB losses during the drought was mainly associated with regionally distinct patterns of soil water deficits and soil clay content. For the AGB recovery, we found strong influences of AGB losses during the drought and of [Formula: see text]. [Formula: see text] is a parameter related to canopy structure and is defined as the ratio of two relative height (RH) metrics of Geoscience Laser Altimeter System (GLAS) waveform data-RH25 (25% energy return height) and RH100 (100% energy return height; i.e., top canopy height). A high [Formula: see text] may reflect forests with a tall understory, thick and closed canopy, and/or without degradation. Such forests with a high [Formula: see text] ([Formula: see text] ≥ 0.3) appear to have a stronger capacity to recover than low-[Formula: see text] ones. Our results highlight the importance of forest structure when predicting the consequences of future drought stress in the tropics.

Conductivity-Regulated Bipolar Electrochemiluminescence Sensing Platform for Indicator-Free Homogeneous Bioassay.

Electrochemiluminescence (ECL) sensors have been widely developed because of their high sensitivity and low background. However, most of them suffered from tedious probe modification on the electrode and cross-interferences within the sensing and reporting reactions. The bipolar electrode based ECL (BPE-ECL) can effectively eliminate interference by physically separating the sensing and reporting cells, but there is still a need for exogenous electroactive indicators to transduce the variations between two poles of a BPE. Herein, based on the discovery that conductivity can be regulated in aqueous medium by homogeneous bioreaction, we showed a novel BPE-ECL sensing platform that combined the conductivity-based biosensing technology with ECL reporting system for the first time. Compared to many short nucleic acids, the target induced a hybridization chain reaction to produce the long nucleic acid aggregates, resulting in a conductivity decrease of the sensing cell and finally reducing the ECL response in the reporting cell. The BPE-ECL platform has already been applied to detect microRNA-21 for a demonstration. This innovative system not only separates the target sensing and reporting reactions but also avoids the use of electrochemical indicators for measurement. The BPE-ECL biosensing platform can be developed to detect different targets by changing the probe used.

Electric Double Layer Regulator Design through a Functional Group Assembly Strategy towards Long-Lasting Zinc Metal Batteries.

Regulating the electric double layer (EDL) structure of the zinc metal anode by using electrolyte additives is an efficient way to suppress interface side reactions and facilitate uniform zinc deposition. Nevertheless, there are no reports investigating the proactive design of EDL-regulating additives before the start of experiments. Herein, a functional group assembly strategy is proposed to design electrolyte additives for modulating the EDL, thereby realizing a long-lasting zinc metal anode. Specifically, by screening ten common functional groups, N, N-dimethyl-1H-imidazole-1-sulfonamide (IS) is designed by assembling an imidazole group, characterized by its high adsorption capability on the zinc anode, and a sulfone group, which exhibits strong binding with Zn2+ ions. Benefiting from the adsorption functionalization of the imidazole group, the IS molecules occupy the position of H2O in the inner Helmholtz layer of the EDL, forming a molecular protective layer to inhibit H2O-induced side reactions. Meanwhile, the sulfone group in IS, acting as a binding site to Zn2+, promotes the de-solvation of Zn2+ ions, facilitating compact zinc deposition. Consequently, the utilization of IS significantly extending the cycling stability of Zn||Zn and Zn||NaV3O8 ⋅ 1.5H2O full cell. This study offers an innovative approach to the design of EDL regulators for high-performance zinc metal batteries.

Functional Lignin Building Blocks: Reactive Vinyl Esters with Acrylic Acid.

Introducing vinyl groups onto the backbone of technical lignin provides an opportunity to create highly reactive renewable polymers suitable for radical polymerization. In this work, the chemical modification of softwood kraft lignin was pursued with etherification, followed by direct esterification with acrylic acid (AA). In the first step, phenolic hydroxyl and carboxylic acid groups were derivatized into aliphatic hydroxyl groups using ethylene carbonate and an alkaline catalyst. The lignin was subsequently fractionated using a downward precipitation method to recover lignin of defined molar mass and solubility. After recovery, the resulting material was then esterified with AA, resulting in lignin with vinyl functional groups. The first step resulted in approximately 90% of phenolic hydroxyl groups being converted into aliphatic hydroxyls, while the downward fractionation resulted in three samples of lignin with defined molar masses. For the esterification reaction, the weight ratio of reagents, reaction temperature, and reaction time were evaluated as factors that would influence the modification efficacy. 13C NMR spectroscopy analysis of lignin samples before and after esterification showed that the optimized reaction conditions could reach approximately 40% substitution of aliphatic hydroxyl groups. Both steps only used lignin and the modifying reagent (no solvent), with the possibility of recovery and reuse of the reagent by dilution and distillation. An additional second esterification step of the resulting lignin sample with acetic acid or propionic acid converted 90% of remaining hydroxyl groups into short-chain carbon aliphatic esters, making a hydrophobic material suitable for further copolymerization with synthetic hydrophobic monomers.

Tropical tall forests are more sensitive and vulnerable to drought than short forests.

Our limited understanding of the impacts of drought on tropical forests significantly impedes our ability in accurately predicting the impacts of climate change on this biome. Here, we investigated the impact of drought on the dynamics of forest canopies with different heights using time-series records of remotely sensed Ku-band vegetation optical depth (Ku-VOD), a proxy of top-canopy foliar mass and water content, and separated the signal of Ku-VOD changes into drought-induced reductions and subsequent non-drought gains. Both drought-induced reductions and non-drought increases in Ku-VOD varied significantly with canopy height. Taller tropical forests experienced greater relative Ku-VOD reductions during drought and larger non-drought increases than shorter forests, but the net effect of drought was more negative in the taller forests. Meta-analysis of in situ hydraulic traits supports the hypothesis that taller tropical forests are more vulnerable to drought stress due to smaller xylem-transport safety margins. Additionally, Ku-VOD of taller forests showed larger reductions due to increased atmospheric dryness, as assessed by vapor pressure deficit, and showed larger gains in response to enhanced water supply than shorter forests. Including the height-dependent variation of hydraulic transport in ecosystem models will improve the simulated response of tropical forests to drought.

Revisiting the Molar Mass and Conformation of Derivatized Fractionated Softwood Kraft Lignin.

The limited utilization of reliable tools and standards for determination of the softwood kraft lignin molar mass and the corresponding molecular conformation hampers elucidation of the structure-property relationships of lignin. At issue, conventional size exclusion chromatography (SEC) is unable to robustly measure the molar mass because of a lack of calibration standards with a similar structure to lignin. In the present work, the determination of the absolute molar mass of acetylated technical lignin was revisited utilizing SEC combined with multi-angle light scattering with a band pass filter to suppress the fluorescence. Fractionated lignin isolated using sequential techniques of solvent and membrane methods was used to enhance the clarity of light-scattering profiles by narrowing the molar mass distribution of lignin fractions. Further information on the molecular conformation of derivatized samples was studied utilizing a differential viscometer, and chemical structures were identified by NMR spectroscopy analysis. Through the help of fractionation, intrinsic viscosity values were determined for the different fractions as a function of molecular weight cut-off membranes. The derivatized acetone-soluble lignin was found to possess a lower molecular weight and an extremely compact structure relative to the derivatized acetone-insoluble fraction based on a significantly lower "α" value in the Mark-Houwink-Sakurada plot (0.15 acetone-soluble vs 0.33 acetone-insoluble). The differences in geometry were supported by the linkage analysis from NMR showing the acetone-soluble part containing fewer native linkages. In both of these examples, kraft lignin behaved like a solid sphere, limiting the ability to provide entanglements between molecular chains. From this standpoint, macroscopic properties of lignin are justified with this knowledge of a dense and extremely compact structure.

Synthetic promoter design in Escherichia coli based on a deep generative network.

Promoter design remains one of the most important considerations in metabolic engineering and synthetic biology applications. Theoretically, there are 450 possible sequences for a 50-nt promoter, of which naturally occurring promoters make up only a small subset. To explore the vast number of potential sequences, we report a novel AI-based framework for de novo promoter design in Escherichia coli. The model, which was guided by sequence features learned from natural promoters, could capture interactions between nucleotides at different positions and design novel synthetic promoters in silico. We combined a deep generative model that guides the search for artificial sequences with a predictive model to preselect the most promising promoters. The AI-designed promoters were optimized based on the promoter activity in E. coli and the predictive model. After two rounds of optimization, up to 70.8% of the AI-designed promoters were experimentally demonstrated to be functional, and few of them shared significant sequence similarity with the E. coli genome. Our work provided an end-to-end approach to the de novo design of novel promoter elements, indicating the potential to apply deep learning methods to de novo genetic element design.

Hard Carbons as Anodes in Sodium-Ion Batteries: Sodium Storage Mechanism and Optimization Strategies.

Sodium-ion batteries (SIBs) are regarded as promising alternatives to lithium-ion batteries (LIBs) in the field of energy, especially in large-scale energy storage systems. Tremendous effort has been put into the electrode research of SIBs, and hard carbon (HC) stands out among the anode materials due to its advantages in cost, resource, industrial processes, and safety. However, different from the application of graphite in LIBs, HC, as a disordered carbon material, leaves more to be completely comprehended about its sodium storage mechanism, and there is still plenty of room for improvement in its capacity, rate performance and cycling performance. This paper reviews the research reports on HC materials in recent years, especially the research process of the sodium storage mechanism and the modification and optimization of HC materials. Finally, the review summarizes the sterling achievements and the challenges on the basis of recent progress, as well as the prospects on the development of HC anode materials in SIBs.

Screening, cloning, enzymatic properties of a novel thermostable cellulase enzyme, and its potential application on water hyacinth utilization.

Cellulose is the cheapest, natural, renewable organic substance that is used as a carbon source in various fields. Water hyacinth, an aquatic plant rich in cellulose, is often used as a raw material in fuel production. However, natural cellulase can be hardly used in industrial production on account of its low thermal stability and activity. In this study, a metagenomic library was constructed. Then, a new cellulase gene, cel1029, was screened by Congo red staining and expressed in the prokaryotic system. Enzymatic properties of Cel1029 were explored, including optimum temperature and pH, thermal and pH stability, and tolerance against organic solvents, metal ions, and salt solutions. Finally, its ability of degrading water hyacinth was identified and evaluated. Cel1029 displayed high homology with endoglucanase in the glycoside hydrolase family 5 (GH5) and had high stability across a broad temperature range. More than 86% of its enzymatic activities were retained between 4 and 60 °C after 24 h of incubation. Single-factor analysis and orthogonal design were further conducted to determine the optimal conditions for the highest reducing sugar yield of water hyacinth. Interestingly, Cel1029 efficiently transformed water hyacinth with a reducing sugar yield of 430.39 mg/g in 22 h. These findings may open the door for significant industrial applications of a novel GH5 cellulase (NCBI Reference Sequence: MK051001, Cel1029) and help identify more efficient methods to degrade cellulose-rich plants.

Dynamic transcriptome profiling in DNA damage-induced cellular senescence and transient cell-cycle arrest.

Cellular senescence is an irreversible cell cycle arrest process associated with aging and senescence-related diseases. DNA damage is an extensive feature of cellular senescence and aging. Different levels of DNA damage could lead to cellular senescence or transient cell-cycle arrest, but the genetic regulatory mechanisms determining cell fate are still not clear. In this work, high-resolution time course analysis of gene expression in DNA damage-induced cellular senescence and transient cell-cycle arrest was used to explore the transcriptomic differences between different cell fates after DNA damage response and to investigate the key regulatory factors affecting senescent cell fates. Pathways such as the cell cycle, DNA repair and cholesterol metabolism showed characteristic differential response. A number of key transcription factors were predicted to regulating cell cycle and DNA repair. Our study provides genome-wide insights into the molecular-level mechanisms of senescent cell fate decisions after DNA damage response.

Colorimetric sensing of selenocystine using gold nanoparticles.

We present a highly selective and sensitive colorimetric method for the detection of selenocystine (SeCys) coexisting with other amino acids, especially cysteine (Cys) using the gold nanoparticles (AuNPs). Firstly, Cys was oxidized to cystine (Cys-Cys) by dissolved oxygen under Cu2+ catalysis in the pre-reaction, which eliminated the interference of Cys in the SeCys sensing process. Then SeCys induced the rapid aggregation of AuNPs through Au-Se bond and complex formation of Cu2+-SeCys in the colorimetric reaction, in which the color change of AuNPs from red to blue or purple with the naked eye detection or with a UV-vis spectrophotometric determination. The concentration of SeCys was quantified by the value at 670 nm from the second-derivative SPR absorbance spectrum. The linear range was from 2 µM to 14 µM with correlation coefficient of 0.999 and a detection limit (LOD) was 0.14 µM. Moreover, the colorimetric response of AuNPs exhibited remarkable specificity to SeCys coexisting with 18 amino acids in a simulation sample, in which the total concentration of Cys and Cys-Cys was less than 15 µM and the each concentration of other 16 common amino acids was 10 µM.

Is reduction better than arthrodesis in situ in surgical management of low-grade spondylolisthesis? A system review and meta analysis.

PURPOSE: To compare the clinical and radiographic outcomes of arthrodesis in situ with arthrodesis after reduction in low-grade spondylolisthesis. METHODS: We performed a comprehensive search of both observational and randomized clinical trials published up to April 2016 in PubMed, MEDLINE, Cochrane Library, and Embase databases. The outcomes included age, sex, operative time, blood loss, and at least 2 years clinical results of Oswestry disability index (ODI), visual analogue scale (VAS), lumbar lordosis, slippage, fusion rate, the rate of good and excellent and the complication rate. Two authors independently extracted the articles and the predefined data. RESULTS: Seven eligible studies, involving four RCTs and three cohort studies were included in this systematic review and meta-analysis. Patients who underwent reduction did achieved better slippage correction comparing with arthrodesis in situ (P < 0.00001). However, there was no significant difference in the case of operative time, blood loss, VAS (P = 0.36), ODI (P = 0.50), lumbar lordosis (P = 0.47), the rate of good and excellent (P = 0.84), fusion rate (P = 0.083) and complication rate (P = 0.33) between the arthrodesis in situ group and the reduction group. CONCLUSIONS: On the basis on this review, arthrodesis after reduction of low-grade spondylolisthesis potentially reduced vertebral slippage. Reduction was neither associated with a longer operative time nor more blood loss. There was no significant difference in the outcomes between reduction and arthrodesis in situ group. Both procedures could be expected to achieve good clinical result. LEVEL OF EVIDENCE: Therapeutic Level IIa.

Synthesis of Metal-Organic Zeolites with Homochirality and High Porosity for Enantioselective Separation.

Using lactic acid derivatives as chiral ligands, a pair of unprecedented homochiral metal-organic zeolites have been synthesized that feature zeotype CAN topology and have high porosity for enantioselective separation of racemates.

Interpenetrated Three-Dimensional Copper-Iodine Cluster-Based Framework with Enantiopure Porphyrin-like Templates.

Presented here is an interpenetrated three-dimensional copper-iodine cluster-based framework with dia topology based on two different kinds of Cu4I4 subunits that is templated by an enantiopure porphyrin-like Cu(I)(5-eatz)2 unit and shows excellent photocatalytic activity to degrade methylene blue under visible light.

Molecular and clinical support for a four-tiered grading system for bladder cancer based on the WHO 1973 and 2004 classifications.

Currently, the use of two classification systems for bladder cancer grade is advocated in clinical guidelines because the WHO2004 classification has not been sufficiently validated with biological markers and follow-up. The slides of 325 primary non-muscle invasive bladder cancers from three hospitals were reviewed by one uro-pathologist in two separate sessions for the WHO1973 (G1, G2 and G3) and 2004 (papillary urothelial neoplasm of low malignant potential (LMP), low-grade (LG) and high-grade (HG)) classifications. FGFR3 status was examined with PCR-SNaPshot analysis. Expression of Ki-67, P53 and P27 was analyzed by immuno-histochemistry. Clinical recurrence and progression were determined. We performed validation and cross-validation of the two systems for grade with molecular markers and clinical outcome. Multivariable analyses were done to predict prognosis and pT1 bladder cancer. Grade review resulted in 88 G1, 149 G2 and 88 G3 lesions (WHO1973) and 79 LMP, 101 LG and 145 HG lesions (WHO2004). Molecular validation of both grading systems showed that FGFR3 mutations were associated with lower grades whereas altered expression (Ki-67, P53 and P27) was found in higher grades. Clinical validation showed that the two classification systems were both significant predictors for progression but not for recurrence. Cross-validation of both WHO systems showed a significant stepwise increase in biological (molecular markers) and clinical (progression) potential along the line: G1-LG-G2-HG-G3. The LMP and G1 categories had a similar clinical and molecular profile. On the basis of molecular biology and multivariable clinical data, our results support a four-tiered grading system using the 1973 and 2004 WHO classifications with one low-grade (LMP/LG/G1) category that includes LMP, two intermediate grade (LG/G2 and HG/G2) categories and one high-grade (HG/G3) category.

Exome sequencing identifies a novel frameshift mutation of MYO6 as the cause of autosomal dominant nonsyndromic hearing loss in a Chinese family.

Autosomal dominant types of nonsyndromic hearing loss (ADNSHL) are typically postlingual in onset and progressive. High genetic heterogeneity, late onset age, and possible confounding due to nongenetic factors hinder the timely molecular diagnoses for most patients. In this study, exome sequencing was applied to investigate a large Chinese family segregating ADNSHL in which we initially failed to find strong evidence of linkage to any locus by whole-genome linkage analysis. Two affected family members were selected for sequencing. We identified two novel mutations disrupting known ADNSHL genes and shared by the sequenced samples: c.328C>A in COCH (DFNA9) resulting in a p.Q110K substitution and a deletion c. 2814_2815delAA in MYO6 (DFNA22) causing a frameshift alteration p.R939Tfs*2. The pathogenicity of novel coding variants in ADNSHL genes was carefully evaluated by analysis of co-segregation with phenotype in the pedigree and in light of established genotype-phenotype correlations. The frameshift deletion in MYO6 was confirmed as the causative variant for this pedigree, whereas the missense mutation in COCH had no clinical significance. The results allowed us to retrospectively identify the phenocopy in one patient that contributed to the negative finding in the linkage scan. Our clinical data also supported the emerging genotype-phenotype correlation for DFNA22.

Resolving the genetic heterogeneity of prelingual hearing loss within one family: Performance comparison and application of two targeted next generation sequencing approaches.

Here, we report an unconventional Chinese pedigree consisting of three branches all segregating prelingual hearing loss (HL) with unclear inheritance pattern. After identifying the cause of one branch as maternally inherited aminoglycoside-induced HL, targeted next generation sequencing (NGS) was applied to identify the genetic causes for the other two branches. One affected subject from each branch was subject to targeted NGS whose genomic DNA was enriched either by whole-exome capture (Agilent SureSelect All Exon 50 Mb) or by candidate genes capture (Agilent SureSelect custom kit). By NGS analysis, we identified that patients from Branch A were compound heterozygous for p.E1006K and p.D1663V in the CDH23 (DFNB12) gene; and patients from Branch B were homozygous for IVS7-2A>G in the SLC26A4 (DFNB4) gene. Both CDH23 mutations altered conserved calcium binding sites of the extracellular cadherin domains. The co-occurrence of three different genetic causes in this family was exceedingly rare but fully compatible with the mutation spectrum of HL. Our study has also raised several technical and analytical issues when applying the NGS technique to genetic testing.

Thalidomide suppresses migration and invasion of colorectal cancer cells by inhibiting HOXB7-mediated activation of the Wnt/ß-catenin signaling pathway.

Heaps of studies have verified the effects of thalidomide (THA) on colorectal cancer (CRC). Howbeit, the corresponding mechanism awaits illustration, which is the foothold of this study. Following the treatment of 0, 1.94, 7.75, or 19.36 µM THA, CRC cell viability, apoptosis, migration, and invasion were evaluated by methyl tetrazolium, flow cytometry, wound-healing, and transwell assays. Homeobox B7 (HOXB7) expression in CRC was analyzed and detected by bioinformatics analysis, quantitative real-time PCR or western blot. After the corresponding transfection or treatment with inhibitor of catenin-responsive transcription-3 (iCRT-3), abovementioned CRC cell biological behaviors as well as expression levels of HOXB7 and ß-catenin were evaluated. 7.75 and 19.36 µM THA dwindled CRC cell viability, migration, and invasion, and facilitated apoptosis. HOXB7 upregulation was detected in CRC cells, which promoted the viability, migration, invasion, and ß-catenin expression, and weakened the apoptosis of CRC cells. Also, HOXB7 upregulation counteracted the effects of THA on CRC cells. iCRT-3 restrained ß-catenin expression, viability, migration, and invasion, whereas promoting the apoptosis of CRC cells. In addition, iCRT-3 antagonized the effects of overexpressed HOXB7 on CRC cells. THA inhibits the migration and invasion of CRC cells, which is achieved by suppressing HOXB7-mediated activation of Wnt/ß-catenin signaling pathway.

Preparation, physicochemical and biological evaluation of chitosan Pleurotus ostreatus polysaccharides active films for food packaging.

The aim of this study was to create CS-POP composite films by blending Pleurotus ostreatus stalk polysaccharides (POP) and chitosan (CS). The effects of adding different concentrations (0 %, 0.25 %, 0.5 %, 0.75 %, and 1 %) of POP on the mechanical, barrier, and optical properties of the CS films were investigated. When the POP content is at 0.5 %, the tensile strength of the composite film reaches its maximum value at 13.691 MPa, showing a significant improvement compared to the tensile strength of the pure CS film. The structure of the CS and CS-POP composite films was characterized by FT-IR spectroscopy, XRD, TGA and SEM. The results indicate that due to the interaction between the two types of CS and POP, the formation of Schiff base, and the intermolecular hydrogen bonds between CS and POP, the addition of POP to CS films can result in a smoother and more stable crystalline structure in the composite film. The CS-POP composite films exhibited enhanced antioxidant and antibacterial activity compared to the CS films alone, with the highest DPPH scavenging activity of 72.43 %. The composite films also showed significant inhibitory effects on the growth of E. coli.