RESUMEN
Given the shift in perception of wastewater treatment plants as water resource recovery facilities, conventional mathematical models need to be updated. The resource recovery perspective should be applied to new processes, technologies and plant layouts. The number and level of models proposed to date give an overview of the complexity of the new plant configurations and provides a wide range of possibilities and process combinations in order to construct plant layouts. This diversity makes the development of standard, modular and flexible tools and model libraries that allow the incorporation of new processes and components in a straightforward way a necessity. In this regard, the plant-wide modelling (PWM) library is a complete model library that includes conventional and advanced technologies and that allows economic and energetic analyses to be carried out in a holistic way. This paper shows the fundamentals of this PWM library that is built upon the above-mentioned premises and the application of the PWM library in three different full-scale case studies.
Asunto(s)
Modelos Teóricos , Aguas del Alcantarillado/química , Aguas Residuales/química , Purificación del Agua/métodos , España , Purificación del Agua/economíaRESUMEN
The increasing costs associated with water supply and the disposal of wastewater has stimulated industries to seek more efficient water management systems. Mathematical modelling and simulation can be a very valuable tool for the study of the multiple alternatives available whilst assessing optimum solutions for water management in industry. This study introduces a new steady state model library able to reproduce industrial water circuits. It has been implemented in a novel software framework for the representation, simulation and optimization of industrial water networks. A water circuit representing a paper mill has been modelled and simulated showing the capability to reproduce real case studies. Alternative scenarios for the water network have also been tested to assess the capability of the models to optimize water circuits minimizing total cost.
Asunto(s)
Residuos Industriales/análisis , Modelos Teóricos , Papel , Eliminación de Residuos Líquidos/economía , Eliminación de Residuos Líquidos/métodos , Contaminantes Químicos del Agua/química , Purificación del AguaRESUMEN
The feasibility to manufacture scaffolds of poly-lactic acid reinforced with Zn particles by fused filament fabrication is demonstrated for the first time. Filaments of 2.85 mm in diameter of PLA reinforced with different weight fractions of µm-sized Zn - 1 wt.% Mg alloy particles (in the range 3.5 to 17.5 wt.%) were manufactured by a double extrusion method in which standard extrusion is followed by precision extrusion in a filament-maker machine. Filaments with constant diameter, negligible porosity and a homogeneous reinforcement distribution were obtained for Zn weight fractions of up to 10.5%. It was found that the presence of Zn particles led to limited changes in the physico-chemical properties of the PLA that did not affect the window temperature for 3D printing nor the melt flow index. Thus, porous scaffolds could be manufactured by fused filament fabrication at 190 °C with poly-lactic acid/Zn composites containing 3.5 and 7 wt.% of Zn and at 170 °C when the Zn content was 10.5 wt.% with excellent dimensional accuracy and mechanical properties.
Asunto(s)
Poliésteres , Andamios del Tejido , Ácido Láctico , Poliésteres/química , Porosidad , Impresión Tridimensional , Andamios del Tejido/química , ZincRESUMEN
The effect of mixing in the modelling of processes based on mass transfer phenomena is commonly ignored in wastewater treatment industry. In this contribution, the effect of the average shear rate in the nucleation and growth rates of struvite is analyzed by combining experimental data with simulation results obtained with a previously presented mass-based discretized population balance model. According to the obtained results, the effect of the average shear rate is identifiable for the selected data and mechanisms. Therefore, it should be considered when a detailed modelling of the process is needed. Consequently, in this contribution, the average shear rate has been decoupled from the kinetic constants. In addition, kinetic rates where it is explicitly included as a power law function have been proposed. The exponents in these power law functions for the primary homogeneous nucleation and growth are 1.3 and 0.3, respectively. Considering shear rate effects allowed to see in the simulation outputs experimentally observed effects: a faster pH decay and smaller particle distribution for increasing mixing intensities.
Asunto(s)
Compuestos de Magnesio , Fosfatos , Precipitación Química , Cinética , EstruvitaRESUMEN
Ammonia ion removal and recovery via an ion-exchange process using zeolites is a promising alternative to traditional biological treatments. The analysis of its efficiency is not straightforward as it depends on various factors, such as the cation exchange capacity of the zeolite, amount of zeolite available, initial ammonia concentration, contact time, ammonia speciation depending on pH or the presence of competing ions. Mathematical modelling and simulation tools are very useful to analyse the effect of different operational conditions on the efficiency and optimal operation of the process. This paper experimentally analyses the effect that the presence of competing ions has on the efficiency of ammonia removal. This experimental work has shown a reduction of around 21% of ammonia removal efficiency in the presence of competing ions. The main contribution of this paper is the development new mathematical model able to describe the ion-exchange process in the presence of competing ions. The mathematical model developed is able to analyse the performance of the IEX process under different empty bed contact times, influent loads, pH and concentrations of competing ions. The capability of the model to reproduce real data has been proven comparing the experimental and simulation results. Finally, an exploration by simulation has been undertaken to show the potential of the mathematical model developed.
Asunto(s)
Amoníaco , Zeolitas , Adsorción , Calibración , Intercambio Iónico , Iones , Modelos TeóricosRESUMEN
Phosphorus has been considered as a pollutant to be removed from the wastewater. In the last years, however, it has been considered a valuable asset that needs to be recovered due to its shortage in nature. The study of optimum phosphorus management in wastewater treatment plants is not straightforward, due to the complexity of technologies and configurations that may be applied for phosphorus removal and recovery. In this context, plant-wide mathematical modelling and simulation tools are very useful for carrying out these studies. This paper introduces a study carried out at the Sur WWTP (Madrid) to assess optimum phosphorus management strategies based on the PWM. The mathematical model made it possible to describe the phosphorus flux and its characterization throughout the plant. Finally, an exploration by simulation with WEST™ was carried out to analyse different plant configurations and different operational strategies to optimize phosphorus management strategies in the Sur WWTP.
Asunto(s)
Fósforo , Eliminación de Residuos Líquidos , Modelos Teóricos , Aguas del Alcantarillado , Aguas ResidualesRESUMEN
Mathematical models describing precipitation processes in one step need to be upgraded. Particle size distribution is a crucial variable and its inclusion in the modelling libraries is necessary if the technology wants to be optimized through simulation. With this objective, a mass based population balance model is presented in this contribution. The model has been constructed using a stoichiometric matrix and a kinetic vector and using mass as the internal coordinate, as it is usually done in wastewater treatment modelling. Identifiability of the parameters of the model was evaluated using a sensitivity and a collinearity analysis for six simulation case studies of struvite precipitation. In addition, parameters in the model were calibrated to represent data from two batch tests in the laboratory. The results of the analysis showed that the identifiability of the parameters depends on the available experimental data and explored scenarios. Identifiability of the parameters could be the reason behind the shifting parameter values describing mechanisms of precipitation in the literature. This contribution helps to understand the possibilities and limitations that the population balance model approach offer.
Asunto(s)
Modelos Teóricos , Aguas Residuales , Precipitación Química , Cinética , Fosfatos , EstruvitaRESUMEN
This paper introduces a new mathematical model built under the PC-PWM methodology to describe the aeration process in a full-scale WWTP. This methodology enables a systematic and rigorous incorporation of chemical and physico-chemical transformations into biochemical process models, particularly for the description of liquid-gas transfer to describe the aeration process. The mathematical model constructed is able to reproduce biological COD and nitrogen removal, liquid-gas transfer and chemical reactions. The capability of the model to describe the liquid-gas mass transfer has been tested by comparing simulated and experimental results in a full-scale WWTP. Finally, an exploration by simulation has been undertaken to show the potential of the mathematical model.
Asunto(s)
Modelos Teóricos , Transición de Fase , Purificación del Agua , Nitrógeno , Aguas del AlcantarilladoRESUMEN
The growing development of technologies and processes for resource treatment and recovery is offering endless possibilities for creating new plant-wide configurations or modifying existing ones. However, the configurations' complexity, the interrelation between technologies and the influent characteristics turn decision-making into a complex or unobvious process. In this frame, the Plant-Wide Modelling (PWM) library presented in this paper allows a thorough, comprehensive and refined analysis of different plant configurations that are basic aspects in decision-making from an energy and resource recovery perspective. In order to demonstrate the potential of the library and the need to run simulation analyses, this paper carries out a comparative analysis of WWTPs, from a techno-economic point of view. The selected layouts were (1) a conventional WWTP based on a modified version of the Benchmark Simulation Model No. 2, (2) an upgraded or retrofitted WWTP, and (3) a new Wastewater Resource Recovery Facilities (WRRF) concept denominated as C/N/P decoupling WWTP. The study was based on a preliminary analysis of the organic matter and nutrient energy use and recovery options, a comprehensive mass and energy flux distribution analysis in each configuration in order to compare and identify areas for improvement, and a cost analysis of each plant for different influent COD/TN/TP ratios. Analysing the plants from a standpoint of resources and energy utilization, a low utilization of the energy content of the components could be observed in all configurations. In the conventional plant, the COD used to produce biogas was around 29%, the upgraded plant was around 36%, and 34% in the C/N/P decoupling WWTP. With regard to the self-sufficiency of plants, achieving self-sufficiency was not possible in the conventional plant, in the upgraded plant it depended on the influent C/N ratio, and in the C/N/P decoupling WWTP layout self-sufficiency was feasible for almost all influents, especially at high COD concentrations. The plant layouts proposed in this paper are just a sample of the possibilities offered by current technologies. Even so, the library presented here is generic and can be used to construct any other plant layout, provided that a model is available.
Asunto(s)
Aguas Residuales , Purificación del Agua/instrumentación , Aguas del Alcantarillado , Eliminación de Residuos LíquidosRESUMEN
This paper introduces a new general methodology for incorporating physico-chemical and chemical transformations into multi-phase wastewater treatment process models in a systematic and rigorous way under a Plant-Wide modelling (PWM) framework. The methodology presented in this paper requires the selection of the relevant biochemical, chemical and physico-chemical transformations taking place and the definition of the mass transport for the co-existing phases. As an example a mathematical model has been constructed to describe a system for biological COD, nitrogen and phosphorus removal, liquid-gas transfer, precipitation processes, and chemical reactions. The capability of the model has been tested by comparing simulated and experimental results for a nutrient removal system with sludge digestion. Finally, a scenario analysis has been undertaken to show the potential of the obtained mathematical model to study phosphorus recovery.
Asunto(s)
Modelos Teóricos , Nitrógeno/química , Fósforo/química , Aguas del Alcantarillado/química , Eliminación de Residuos Líquidos/métodos , Análisis de la Demanda Biológica de Oxígeno , Concentración de Iones de Hidrógeno , Eliminación de Residuos Líquidos/economía , Aguas Residuales/químicaRESUMEN
This paper presents a new modelling methodology for dynamically predicting the heat produced or consumed in the transformations of any biological reactor using Hess's law. Starting from a complete description of model components stoichiometry and formation enthalpies, the proposed modelling methodology has integrated successfully the simultaneous calculation of both the conventional mass balances and the enthalpy change of reaction in an expandable multi-phase matrix structure, which facilitates a detailed prediction of the main heat fluxes in the biochemical reactors. The methodology has been implemented in a plant-wide modelling methodology in order to facilitate the dynamic description of mass and heat throughout the plant. After validation with literature data, as illustrative examples of the capability of the methodology, two case studies have been described. In the first one, a predenitrification-nitrification dynamic process has been analysed, with the aim of demonstrating the easy integration of the methodology in any system. In the second case study, the simulation of a thermal model for an ATAD has shown the potential of the proposed methodology for analysing the effect of ventilation and influent characterization.