Antibacterial activity and physicochemical properties of a sealer containing copaiba oil.

This study aimed to evaluate the antimicrobial activity and physicochemical properties of a novel dual-cure endodontic sealer containing copaiba oil. The copaiba oil was obtained and characterized by gas chromatography (GC), and the minimum inhibitory concentration (MIC) was performed. The experimental sealers were formulated with copaiba oil concentrations of 0, 0.5, 1, and 2%, and the RealSeal™ (Sybron endo, Orange, USA) and AH Plus (Dentsply De Trey Gmbh, Konstanz, Germany) were used as the commercial references. The antimicrobial activity of the sealers was evaluated by the direct contact test for 1h and 24h. To evaluate the physicochemical properties of the sealers, the degree of conversion, setting time, film thickness, dimensional stability, and radiopacity tests were performed. The data were statistically analyzed by one-way ANOVA and Tukey's test (α = 0.05). Concerning the results, the sealers containing copaiba oil showed antimicrobial activity without harming the physicochemical properties.

The effect of prosthetic rehabilitation with or without dietary advice on nutritional status in elderly patients: a systematic review.

BACKGROUND: Elderly people frequently report tooth loss, affecting their nutritional status. There is a gap in the scientific evidence about the influence of prosthodontic rehabilitation on nutritional status. OBJECTIVE: To investigate the influence of prosthodontic rehabilitation combinates or not with dietary advice on nutritional status in elderly patients. METHODS: A systematic literature search was conducted in three electronic databases to identify randomized clinical trials that evaluated the effect of prosthetic rehabilitation on nutritional status in subjects aged 60 years or older, with a follow-up of at least 1 month after prosthesis rehabilitation. RESULTS: Of the 1517 articles identified in the initial search, 12 were selected for the final review. No significant difference between the types of prosthesis were found regarding the chewing by the elderly population. Although patients who received prosthetic treatment had significant improvement in chewing ability, a consistent pattern of improvement in nutritional status was not observed when they did not receive dietary advice. In addition, the association between the condition of the dentition, the masticatory performance and nutritional change of elderly patients has been found. Studies that evaluated simultaneous complete denture treatment and simple dietary advice showed an improvement of nutrient intake in elderly patients. CONCLUSIONS: Isolated prosthetic rehabilitation may not have the effect of exerting a change in nutritional status of edentulous elderly patients. In general, simultaneous dietary consulting and prosthetic treatment in combination may improve dietary habits, since masticatory capacity and efficiency are not the only factors that influence the nutritional status of a patient.

Non-carious cervical lesions (NCCLs) and associated factors: A multilevel analysis in a cohort study in southern Brazil.

AIM: To investigate the prevalence of non-carious cervical lesions (NCCLs) and their association with individual and tooth-related factors in adults from the 1982 Pelotas Birth Cohort. MATERIALS AND METHODS: Participants were interviewed and clinically examined at the age of 31. NCCL was defined as loss of dental tissue without bacterial involvement in the cervical region. Independent variables were the socioeconomic, demographic, behavioural, and clinical characteristics. Associations were tested using a multilevel Poisson regression model. RESULTS: Five-hundred and thirty-nine participants were clinically examined, with a 26% prevalence of NCCLs, which were more prevalent in the maxilla (56.5%) and in premolars (72.9%). In the multilevel analysis, women presented lower prevalence than men [prevalence ratio (PR) 0.59 (0.48-0.73)]; those who reported smoking at both 22 and 30 years of age had more NCCLs than those who never smoked [PR 1.65 (1.31-2.07)]; and high-frequency brushers presented higher prevalence than low-frequency brushers [PR 1.26 (1.03-1.55)]. Gingival recession increased 10 times the prevalence of NCCLs [PR 10.03 (8.15-12.35)], while the presence of periodontal pockets (≥4 mm) reduced the prevalence of NCCLs [PR 0.43 (0.28-0.66)]. CONCLUSIONS: NCCLs were more prevalent in males, smokers, and those with higher frequency of toothbrushing. While the presence of periodontal pockets was associated with a lower prevalence of NCCLs, gingival recession was a strong clinical indicator for the presence of NCCLs.

Novel polymethyl methacrylate modified with metal methacrylate monomers: biological, physicomechanical, and optical properties.

This study sought to evaluate the physical and antimicrobial properties of a thermopolymerizable acrylic resin (PMMA) modified with metallic methacrylate monomers -zirconia (ZM), tin (TM), and di-n-butyl (DNTMB) methacrylates. Color stability was evaluated before and after immersion of samples in a staining solution by a digital spectrophotometer. The mechanical brushing test was evaluated by the roughness test. The flexural strength test used a mechanical testing machine. Human keratinocytes were used to assess cell viability and the biofilm formation assay was carried out for 5 days, in a microcosms model after one year of specimen storage. For statistical analysis, the method chosen was based on adherence to the normal distribution model and equality of variances (p < 0.05). The addition of DNTMB to PMMA promoted great antimicrobial action, acceptable cytocompatibility, without hampering the physical-mechanical properties of the commercial material. Therefore, the modified PMMA proved to be a promisor alternative to conventional resins.This study sought to evaluate the physical and antimicrobial properties of a thermopolymerizable acrylic resin (PMMA) modified with metallic methacrylate monomers -zirconia (ZM), tin (TM), and di-n-butyldimethacrylate-tin (DNTMB) methacrylates. Color stability was evaluated before and after immersion of samples in a staining solution using a digital spectrophotometer. The mechanical brushing test was evaluated by the roughness test. The flexural strength test used a mechanical testing machine. Human keratinocytes were used to assess cell viability and the biofilm formation assay was carried out for 5 days in a microcosm model after one year of specimen storage. For statistical analysis, the method chosen was based on adherence to the normal distribution model and equality of variances (p < 0.05). The addition of DNTMB to PMMA promoted great antimicrobial action, acceptable cytocompatibility, without hampering the physical-mechanical properties of the commercial material. Therefore, the modified PMMA proved to be a promising alternative to conventional denture base resins for dental use.

In vitro efficacy of commercial and experimental proteolytic enzyme-based whitening dentifrices on enamel whitening and superficial roughness.

OBJECTIVE: To evaluate the whiteness index (WID ) and surface roughness (Ra) of bovine enamel after simulated tooth brushing with different commercial and experimental whitening dentifrices. MATERIALS AND METHODS: Cylindrical enamel bovine specimens were acid etched, stained, and divided in nine groups (n = 8): Colgate® Optic White®, Crest® Baking Soda and Peroxide, Arm and Hammer® Advanced White™ Extreme Whitening, Rembrandt® Deeply White® + Peroxide, Close up® White Attraction Natural Glow, Hinode Prowhite, and experimental dentifrice containing papain (PP), bromelain (PB), or papain and bromelain (PPB). Ra and WID were obtained initially and after 600, 1200, and 3,600 cycles of simulated tooth brushing. Data were analyzed using two-way analysis of variance test (α = 0.05). RESULTS: Ra was significantly influenced by both dentifrice (p = 0.043) and period of tooth-brushing simulation (p < 0.001). Except for PP and PPB, all groups showed a statistically significant increase in Ra after simulated tooth brushing. After staining and brushing, none of the materials tested increased the initial WID . CONCLUSIONS: The effect of commercial whitening dentifrices may be related to their high abrasiveness. Experimental formulations tested provided a similar effect without undesired wear of enamel. Whitening dentifrices only act through an abrasive effect rather than bleaching the tooth structures. When used, special care must be taken for avoid undesired wear of enamel. Experimental dentifrices provided similar removal of extrinsic stains without undesired abrasiveness; however, this effect may be due to the use of less aggressive abrasives in their formulations.

Anti-biofilm activity of a novel pit and fissure self-adhesive sealant modified with metallic monomers.

Dental plaque is a biofilm composed of a complex oral microbial community. The accumulation of plaque in the pit and fissures of dental elements often leads to the development of tooth decay (dental caries). Here, potent anti-biofilm materials were developed by incorporating zinc methacrylates or di-n-butyl-dimethacrylate-tin into the light-curable sealant and their physical, mechanical, and biological properties were evaluated. The data revealed that 5% di-n-butyl-dimethacrylate-tin (SnM 5%) incorporated sealant showed strong anti-biofilm efficacy against various single-species (Streptococcus mutans or Streptococcus oralis or Candida albicans) and S. mutans-C. albicans cross-kingdom dual-species biofilms without either impairing the mechanical properties of the sealant or causing cytotoxicities against mouse fibroblasts. The findings indicate that the incorporation of SnM 5% in the experimental pit and fissure self-adhesive sealant may have the potential to be part of current chemotherapeutic strategies to prevent the formation of cariogenic oral biofilms that cause dental caries.

Physico-chemical and antimicrobial properties and the shelf life of experimental endodontic sealers containing metal methacrylates.

The objective of this study was to evaluate the physico-chemical and antimicrobial properties of a dual polymerization experimental endodontic sealer (E) and experimental sealers containing dibutyltin methacrylate (Sn2+) (ETs) or calcium methacrylate (Ca2+) (ECs). The pH and ion release levels of the sealers were measured. The dimensional stability was evaluated in accordance with ISO 6876. Biofilm growth inhibition was evaluated using confocal laser scanning microscopy (CLSM). Biofilm viability analysis was performed using the SYTO 9 technique. The shelf life was evaluated through the degree of conversion and film thickness tests after the sealers had been stored for different periods of time. For statistical analysis, ANOVA and Tukey's post hoc test were used, with a significance level of 5%. ETs revealed better anti-biofilm potential after 15 days than that of the controls. The degree of conversion was reduced after the shelf-life period. The addition of calcium and dibutyltin methacrylate improved the anti-biofilm properties of the experimental endodontic sealer without impairing their physico-chemical properties.

Efficacy of natural, peroxide-free tooth-bleaching agents: A systematic review, meta-analysis, and technological prospecting.

The aim of this study is to analyze the efficacy of natural bleaching agents and the current technological development in this research field. Two reviewers performed a literature search up to July 2019 in 15 databases. Five laboratory studies and 25 patents were included. Data regarding natural bleaching agent used, application protocol, and the main findings of studies were analyzed. Laboratory studies that evaluated natural bleaching agents' peroxide-free or associated to peroxides and patents related to natural bleaching agents were included. The studies evaluated papain, bromelain, chlorine dioxide, sodium chloride plus vinegar and sodium bicarbonate as peroxide-free agents; and sweet potato extract, lactoperoxidase, and peroxidase associated to peroxide used were included. Twenty-five patents were included; among the most cited are the papain and the chlorine. The addition of non-peroxide agents into peroxide showed improvement in bleaching effect with the incorporation of these non-peroxide agents (p < .05). On the other hand, peroxide-free agents did not show an improvement in bleaching effect (p < .05). The evidence in literature suggested that natural bleaching agents incorporated to peroxide may improve the bleaching. Therefore, the current literature does not support the use of natural agents as dental bleaching.

Bonding Performance of Universal Adhesives: An Updated Systematic Review and Meta-Analysis.

PURPOSE: To evaluate through a systematic review and meta-analysis whether the immediate and long-term bonding performance of universal adhesives would be improved by prior acid etching. MATERIALS AND METHODS: Two reviewers performed a literature search up to April 2018 in eight databases: PubMed, Web of Science, Cochrane Library, SciELO, Scopus, LILACS, IBECS, and BBO. Only studies that evaluated the dentin or enamel bond strength of universal adhesives using a self-etch or etch-and-rinse strategy were included. Analyses were carried out using RevMan 5.3.5 (The Nordic Cochrane Centre, The Cochrane Collaboration, Copenhagen, Denmark). A global analysis comparing self-etch or etch-and-rinse strategies and the influence of aging on bonding performance was performed with random-effects models at a significance level of p < 0.05. RESULTS: A total of 59 in vitro studies were included in the meta-analysis. The enamel bond strength of universal adhesives was improved by the etch-and-rinse approach (p < 0.05). In dentin, this effect was observed for ultra-mild and intermediately strong universal adhesives (p < 0.05). Irrespective of the strategy employed, intermediately strong adhesives showed a decrease in bond strength after all types of aging. This effect was also observed for ultra--mild universal adhesives used in the etch-and-rinse approach (p < 0.05). Mild universal adhesives showed bond strength stability in both strategies (p > 0.05). CONCLUSIONS: The in vitro evidence suggests that bonding performance of mild universal adhesives can be improved by using the selective enamel-etch strategy. Mild universal adhesives seem to be the more stable materials, in both etch-and-rinse or self-etch strategies.

Efficacy of antimicrobial agents incorporated in orthodontic bonding systems: a systematic review and meta-analysis.

AIMS: The purpose of this study was to evaluate the efficacy of orthodontic bonding systems containing different antimicrobial agents, as well as the influence of antimicrobial agent incorporation in the bonding properties of these materials. METHODS: Eight databases were searched: PubMed (Medline), Web of Science, Scopus, Lilacs, Ibecs, BBO, Scielo and Google Scholar. Any study that evaluated antimicrobial activity in experimental or commercial orthodontic bonding systems was included. DATA EXTRACTION: Data were tabulated independently and in duplicated by two authors on pre-designed data collection form. DATA SYNTHESIS: The global analysis was carried out using a random-effects model, and pooled-effect estimates were obtained by comparing the standardised mean difference of each antimicrobial orthodontic adhesive with the respective control group. A p-value < .05 was considered as statistically significant. RESULTS: Thirty-two studies were included in the qualitative analysis; of these, 22 studies were included in the meta-analysis. Antimicrobial agents such as silver nanoparticles, benzalkonium chloride, chlorhexidine, triclosan, cetylpyridinium chloride, Galla chinensis extract, acid ursolic, dimethylaminododecyl methacrylate, dimethylaminohexadecyl methacrylate, 2-methacryloyloxyethyl phosphorylcholine, 1,3,5-triacryloylhexahydro-1,3,5-triazine, zinc oxide and titanium oxide have been incorporated into orthodontic bonding systems. The antimicrobial agent incorporation in orthodontic bonding systems showed higher antimicrobial activity than the control group in agar diffusion (overall standardised mean difference: 3.71; 95% CI 2.98 to 4.43) and optical density tests (0.41; 95% CI -0.05 to 0.86) (p < .05). However, for biofilm, the materials did not present antimicrobial activity (6.78; 95% CI 4.78 to 8.77). Regarding bond strength, the global analysis showed antimicrobial orthodontic bonding systems were statistically similar to the control. CONCLUSIONS: Although there is evidence of antibacterial activity from in vitro studies, clinical and long-term studies are still necessary to confirm the effectiveness of antibacterial orthodontic bonding systems in preventing caries disease.

The Phytochemistry and Pharmacology of Butia sp.: A Systematic Review and an Overview of the Technological Monitoring Process.

The Butia sp. are native South America trees, whose fruits are consumed in natura and have significant biological properties; however, trees of this genus plant are in danger of extinction. A systematic review of the literature and a technological overview were carried out to summarize the available evidence on the therapeutic uses and the phytochemical compounds of Butia sp. The following electronic databases were researched: MedLine (PubMed), Web of Science, Scopus, Scielo, and the gray literature. Furthermore, the online system such as the US Patent and Trademark Office, Espacenet, National Institute of Industrial Property, and Google Patents were accessed to obtain patent data. The inclusion criteria were articles that describe either the therapeutic uses of Butia sp. (antimicrobial activity, antioxidant activity, anti-inflammatory activity, antineoplastic activity) or studies describing phytochemical compounds of Butia sp. A limited amount of manual search was also undertaken. Reference lists were scanned to identify other relevant studies, and requests for unpublished data were conducted to people working in the field. Among 12 papers and 14 patents, 9 complete texts of scientific articles and 1 patent were scrutinised by two reviewers. We concluded that Butia has shown some antioxidant, anti-inflammatory, and antimicrobial activity, and its use could have important implications for future therapeutic uses. Although there is evidence of pharmacological potential from in vitro studies, clinical studies must be conducted to confirm the effectiveness of Butia sp. The evidence of its therapeutic uses has not been extensively studied yet, and the available evidence still needs further confirmation. Copyright © 2017 John Wiley & Sons, Ltd.

In situ evaluation of color stability and hardness' decrease of resin-based composites.

OBJECTIVE: To determine the color stability (CS) and hardness' decrease (HD) of two commercial resin-based composites (RBCs), after in situ staining conditions (SC). METHODS: Six disc-shaped specimens (6 × 2 mm) of two RBCs-Filtek Z350 XT (FZX) and IPS Empress Direct (IED)-were randomly distributed into palatal devices. Eight volunteers (aged 20-30 years) participated in this study. The in situ SC consisted of 400 mL consumption (2 × 200 mL/day) of water, orange juice, cola soda, and coffee and 140 mL consumption of red wine, 10 days each. CS was obtained by CIELAB color difference (ΔE*) and HD (in %) by the Knoop method (50 g for 15 s), after curing (baseline) and after the in situ SC. Data were statistically analyzed at α = 0.05 significance level. RESULTS: For both RBCs, the coffee (5.7 ± 0.5 for FZX; 5.9 ± 1.3 for IED) and red wine (6.1 ± 1.1 for FZX; 6.2 ± 1.6 for IED) groups showed the highest ΔE* while water the lowest (1.6 ± 0.6 for FZX; 1.8 ± 0.2 for IED). The highest HD was induced by red wine group for FZX (40.7 ± 5.4) and by cola soda for IED (40.6 ± 3.2) while the water groups (8.3 ± 1.7 for FZX; 7.8 ± 2.1 for IED) presented the lowest values for both RBCs. CONCLUSION: Both RBCs were affected by the in situ SC, but no significant differences for CS and HD were observed between them. Red wine and coffee showed higher discoloration potential. CLINICAL SIGNIFICANCE: This in situ study suggests that color stability and hardness' decrease of resin-based composites were dependent on the type of consumed beverage and materials' composition. Patients with esthetic direct restorations should be aware of the degradative potential of them.

(7-Chloroquinolin-4-yl)arylhydrazones: Candida albicans enzymatic repression and cytotoxicity evaluation, Part 2.

OBJECTIVE: This work describes the anti-enzymatic activity of (7-chloroquinolin-4-yl)arylhydrazones against Candida albicans and examines their cytotoxicity. MATERIAL AND METHODS: Ten C. albicans strains [nine isolates and one azole-resistant standard strain (ATCC 62342)] were used to assess the anti-enzymatic activity. Fifteen compounds at sub-antifungal concentrations ranging from 12.5 to 100 µg/ml were assessed after a 30-min exposure. The strains were seeded onto petri dishes with selective agar media for aspartyl proteases (Saps) and phospholipases (PLs). Enzymatic inhibition was measured by the reduction of the precipitation zone (Pz) against untreated strains (positive control). A colorimetric MTT assay was used with 3T3/NIH mouse fibroblasts to evaluate cytotoxicity. Cells were exposed to 15 compounds in concentrations from 6.25 to 100 µg/ml for 24 and 48 h. RESULTS: Four hydrazones showed enzymatic repression values over 40% to Pl and three over 20% to Saps. The cell viability was over 50% at hydrazone concentrations of 25-100 µg/ml. CONCLUSION: These results revealed that select (7-chloroquinolin-4-yl)arylhydrazones may be potential antifungal agents for the control of C. albicans infections.

Enhanced Antibacterial Properties of Titanium Surfaces through Diversified Ion Plating with Silver Atom Deposition.

In this study, we investigate the antibacterial effect of silver atoms implanted into a thin surface layer of titanium at low energies using an alternative ion plating technology called Diversified Ion Plating. Silver atoms were incorporated into titanium samples using reactive low-voltage ion plating at 2 keV and 4 keV. Surface modifications and morphology were evaluated using wettability, profilometry measurements, and energy-dispersive spectroscopy. For a precise determination of the quantity and depth of implanted silver atoms on titanium surfaces, a combination of experimental techniques such as Rutherford Backscattering Spectrometry along with Monte Carlo simulations were utilized. To assess the antibacterial effects of the silver atoms incorporated into pure titanium surfaces, bacterial suspension immersion tests were performed with a standard strain of Staphylococcus aureus (ATCC 12600). The outcomes indicate that titanium surfaces implanted with silver atoms were more effective in inhibiting the growth of Staphylococcus aureus than pure titanium surfaces. Better results were found when the deposition was performed at 4 keV, indicating that a deeper implantation of silver, spanning a few nanometers, can result in a longer and more effective release of silver atoms. These findings suggest the potential for the development of new, cost-effective biomaterials, paving the way for improved implant materials in various health-related applications.

Clinical evaluation of two desensitizing treatments in southern Brazil: A 3-month follow-up.

OBJECTIVE: This study aimed to evaluate and compare the effectiveness of two treatments for dentin hypersensitivity in vivo during 90 days of follow-up. MATERIALS AND METHODS: The sample consisted of 117 teeth (13 patients) that were divided into three groups: control with carbomer 940 gel (n = 32) (placebo treatment), 2% sodium fluoride gel (n = 31) and low-level infrared diode laser (n = 54). Prior to the desensitizing treatment, the dentin hypersensitivity status of each tooth was assessed by an evaporative stimulus; the patient's response was evaluated using the Visual Analogue Scale (VAS) and by counting the Exposure Time to Air Blast (ETAB) with a dental air syringe. Re-evaluations of the treatments occurred after 5 min, 7, 15, 30 and 90 days. The statistical analysis was performed using the Kruskal-Wallis test, Friedman test, one-way ANOVA, Tukey's test and Spearman's rank correlation (α = 5%). RESULTS: No significant differences were observed among the low-level laser, 2% topical fluoride and carbomer 940 gel applications. When the methods of evaluation (VAS and ETAB) were compared, there was no difference among the groups with respect to the values for every period of evaluation (p < 0.001), verifying that the scores obtained with the VAS decreased at the same proportion as the remaining time of ETAB increased. CONCLUSIONS: This study showed that both tested therapies were efficacious in controlling painful symptoms associated with dentin hypersensitivity over the entire 90-day follow-up period. The treatments were able to reduce the painful symptoms caused by dentin hypersensitivity, including placebo.

MicroRNAs expressed during normal wound healing and their associated pathways: A systematic review and bioinformatics analysis.

MicroRNAs (miRNAs) are responsible for regulating gene expression post-transcriptionally. Are involved in several biological processes, such as wound healing. Understanding the miRNAs involved in this process is fundamental for the development of new therapies. So, due to the need to understand the role of these molecules, we aimed systematically review the literature in order to identify which miRNAs are involved in the wound healing and determine, through bioinformatics analysis, which signaling pathways are associated with these miRNAs. An electronic search was performed in the following databases: National Library of Medicine National Institutes of Health (PubMed), Science Direct, Scifinder, Scopus and Web of Science, using the descriptors: "(microRNA [MeSH])" and "(skin [MeSH])" and "(wound healing [MeSH])". After the search, two independent and previously calibrated reviewers selected the articles that analyzed the expression pattern of miRNAs in wound healing in in vivo studies, using the software Zotero bibliography manager. Following, bioinformatic analysis was performed using the software DIANA Tools, mirPath v.3 and the data was interpreted. The bioinformatics analysis revealed that on the day 1 there were 13 union pathways, eight of which were statistically significant. Still on the day 1, among the miRNAs that had a decrease in their expression, 12 of 17 union pathways found were statistically significant. On the day 5, among the miRNAs with an increase in expression, 16 union pathways were found, 12 of which were statistically significant. Finally, among the miRNAs with decreased expression, 11 of 15 union pathways found were statistically significant. Although it has been found substantial heterogeneity in the studies, with this systematic review, it was possible to study the panorama of miRNAs that may be altered in the wound healing. The present review summarizes existing evidence of miRNAs associated to wound healing, and these findings can contribute to new therapeutic approaches.

The Role of Plant Lectins in the Cellular and Molecular Processes of Skin Wound Repair: An Overview.

There is increasing pressure for innovative methods to treat compromised and difficult-to-heal wounds. Consequently, new strategies are needed for faster healing, reducing infection, hydrating the wound, stimulating healing mechanisms, accelerating wound closure, and reducing scar formation. In this scenario, lectins present as good candidates for healing agents. Lectins are a structurally heterogeneous group of glycosylated or non-glycosylated proteins of non-immune origin, which can recognize at least one specific monosaccharide or oligosaccharide specific for the reversible binding site. Cell surfaces are rich in glycoproteins (glycosidic receptors) that potentially interact with lectins through the number of carbohydrates reached. This lectin-cell interaction is the molecular basis for triggering various changes in biological organisms, including healing mechanisms. In this context, this review aimed to (i) provide a comprehensive overview of relevant research on the potential of vegetable lectins for wound healing and tissue regeneration processes and (ii) discuss future perspectives.

Correction: MicroRNAs expressed during normal wound healing and their associated pathways: A systematic review and bioinformatics analysis.

[This corrects the article DOI: 10.1371/journal.pone.0281913.].

Propolis Controlled Delivery Systems for Oral Therapeutics in Dental Medicine: A Systematic Review.

This systematic review synthesizes the existing evidence in the literature regarding the association of propolis with controlled delivery systems (DDSs) and its potential therapeutic action in dental medicine. Two independent reviewers performed a literature search up to 1 June 2023 in five databases: PubMed/Medline, Web of Science, Cochrane Library, Scopus, and Embase, to identify the eligible studies. Clinical, in situ, and in vitro studies that investigated the incorporation of propolis as the main agent in DDSs for dental medicine were included in this study. Review articles, clinical cases, theses, dissertations, conference abstracts, and studies that had no application in dentistry were excluded. A total of 2019 records were initially identified. After carefully examining 21 full-text articles, 12 in vitro studies, 4 clinical, 1 animal model, and 3 in vivo and in vitro studies were included (n = 21). Relevant data were extracted from the included studies and analyzed qualitatively. The use of propolis has been reported in cariology, endodontics, periodontics, stomatology, and dental implants. Propolis has shown non-cytotoxic, osteoinductive, antimicrobial, and anti-inflammatory properties. Moreover, propolis can be released from DDS for prolonged periods, presenting biocompatibility, safety, and potential advantage for applications in dental medicine.

Advancements in additive manufacturing for video laryngoscopes: a comprehensive scoping and technological review.

The global healthcare crisis with the COVID-19 pandemic has placed a significant overwhelming demand for intubation procedures and the need for reliable and accessible video laryngoscopes. The purpose of this scoping and technological review is to provide a comprehensive overview of the current state of the art, covering the period from 2007 to 2022, pertaining to the manufacturing process, characteristics, and validation of video laryngoscopes produced using additive manufacturing techniques. Following the guidelines outlined in the Preferred Reporting Items for Systematic Reviews and Meta-Analyses extension for Scoping Reviews (PRISMA-ScR), an exhaustive search was conducted across nine prominent databases (PubMed, Web of Science, Scopus, Cochrane, Prospero, Scielo, Embase, Lilacs, Virtual Health Libraries-VHL) and four patent databases (EPO/ESPACENET, WIPO/PATENTSCOPE, National Institute of Industrial Property (INPI), Google Patents). The main materials utilized for the impression, as well as the physical characteristics of the device are introduced at first. Crucial aspects to facilitate proper visualization of the anatomical structures during endotracheal intubation as the optimal angulation of the blade, the mechanical resistance of the device, traction force on the jaw, intubation time, and the experimental methods employed to validate its performance were reviewed in terms of their recent advances.