Biomechanical evaluation of different medial column fixation patterns for valgus pilon fractures.

BACKGROUND: The purpose of this study was to perform a biomechanical analysis to compare different medial column fixation patterns for valgus pilon fractures in a case-based model. METHODS: Based on the fracture mapping, 48 valgus pilon fracture models were produced and assigned into four groups with different medial column fixation patterns: no fixation (NF), K-wires (KW), intramedullary screws (IS), and locking compression plate (LCP). Each group contained wedge-in and wedge-out subgroups. After fixing each specimen on the machine, gradually increased axial compressive loads were applied with a load speed of one millimeter per minute. The maximum peak force was set at 1500 N. Load-displacement curves were generated and the axial stiffness was calculated. Five different loads of 200 N, 400 N, 600 N, 800 N, 1000 N were selected for analysis. The specimen failure was defined as resultant loading displacement over 3 mm. RESULTS: For the wedge-out models, Group-IS showed less displacement (p < 0.001), higher axial stiffness (p < 0.01), and higher load to failure (p < 0.001) than Group-NF. Group-KW showed comparable displacement under loads of 200 N, 400 N and 600 N with both Group-IS and Group-LCP. For the wedge-in models, no statistical differences in displacement, axial stiffness, or load to failure were observed among the four groups. Overall, wedge-out models exhibited less axial stiffness than wedge-in models (all p < 0.01). CONCLUSIONS: Functional reduction with stable fixation of the medial column is essential for the biomechanical stability of valgus pilon fractures and medial column fixation provides the enough biomechanical stability for this kind of fracture in the combination of anterolateral fixation. In detail, the K-wires can provide a provisional stability at an early stage. Intramedullary screws are strong enough to provide the medial column stability as a definitive fixation. In future, this technique can be recommended for medial column fixation as a complement for holistic stability in high-energy valgus pilon fractures.

Clinical outcomes and affecting factors of ipsilateral femoral neck and shaft fractures - Multination, multicenter analysis.

BACKGROUND: This study aimed to evaluate the clinical outcomes of ipsilateral femoral neck and shaft fractures and identify the risk factors associated with missed diagnosis of femoral neck fractures and clinical outcomes of this fracture. METHODS: The ipsilateral femoral neck and shaft fractures from seven centers were retrospectively reviewed. Data on injury mechanism, fracture pattern, and fracture classification; surgical factors including fixation method; and timing of detection of femoral neck fracture were analyzed. The clinical outcomes, complications, and the incidence of avascular necrosis of the femoral head (AVNFH) were reviewed. Risk factors for missed femoral neck fracture and complications were analyzed. RESULTS: In total, 74 patients with an average age of 43.6 years were included. Of the femoral shaft fractures, 56.8% were type A, 21.6% were type B, and 21.6% were type C. Sixteen patients had an open fracture of the femoral shaft. Femoral neck fracture was initially missed in 27% patients and the timing of delayed diagnosis was at an average of 11.1 days after injury. For detecting femoral neck fractures, minimal displacement of the femoral neck fracture was a risk factor, whereas computed tomography (CT) was a protective factor. The incidence of AVNFH was 6.8% at an average of 36.8 months after injury. The AVNFH group had more displaced femoral neck fractures at the time of surgery, but there was no difference in the timing of diagnosis compared to non-AVNFH group. The femoral shaft showed considerable healing problems, with an average union time of 29.7 weeks and a 20.2% nonunion rate. CONCLUSION: Ipsilateral femoral neck and shaft fractures had a high rate of missed diagnosis, especially in minimally displaced fractures; however, CT was a protective factor. AVNFH occurred in 6.8% and was related to femoral neck fracture displacement, but not delayed diagnosis. The femur nonunion rate was high, which warrants attention.

Modified posteromedial approach for treatment of posterior pilon variant fracture.

BACKGROUND: Posterior pilon variant fracture is a recently described posterior malleolus fracture characterized by the involvement of both posterolateral and posteromedial malleolar fragment. The associated surgical approach remains controversial. The aim of this study was to present the application of modified posteromedial approach in the treatment for posterior pilon variant fracture. METHODS: Sixteen patients were identified with posterior pilon variant fractures. All fractures were operated via modified posteromedial approach. Fragment length ratio, area ratio and height were measured as morphologic assessments. The clinical outcome was evaluated with American Orthopaedic Foot & Ankle Society ankle-hind foot score and visual analogue scale. Radiological images were evaluated using osteoarthritis-score. RESULTS: According to the radiological measurements, the average fragment length ratio of posteromedial and posterolateral fragment was 25.3 and 31.5 % respectively. All fractures healed within a mean period of 13.1 weeks without malalignment or articular step-off. Fourteen patients were followed up, and all achieved good or excellent ankle function. The average score of American Orthopaedic Foot & Ankle Society and visual analogue scale at rest, motion and weight bearing walking was 85.6 and 0.25, 0.81, 1.31 respectively. CONCLUSION: Modified posteromedial approach provides an alternative surgical treatment for posterior pilon variant fractures, and the short-term outcome was good.

Combined approaches for fixation of Schatzker type II tibial plateau fractures involving the posterolateral column: a prospective observational cohort study.

INTRODUCTION: This study aimed to investigate the surgical techniques and the clinical efficacy of combined approaches for the treatment of Schatzker type II tibial plateau fractures involving the posterolateral column [lateral and posterolateral columns (LPCs) fractures] in a prospective cohort. MATERIALS AND METHODS: From January 2007 through December 2010, a total of 65 patients with LPCs underwent dual-plate fixation via a combined anterior and posterior approach. The anterior and posterior approaches were the conventional anterolateral approach and a posteromedial inverted L-shaped approach, respectively, with the patients in a floating position. RESULTS: Ultimately, 41 patients were followed up for a mean period of 52.5 months. All fractures healed. The mean time to radiographic bony union was 15.2 weeks and the mean time to full weight-bearing was 18.7 weeks. No parameter associated with knee alignment changed significantly between immediately postoperation and 2 years postoperation. No collapse of the reduced articular surface was detected. Two years postoperation, the mean Hospital for Special Surgery score was 92.3; the mean Short Form-36 score was 90.1, and the mean range of knee motion was 1.7°-123.6° (extension-flexion). Two patients suffered dehiscence of the anterolateral incision and another suffered partial necrosis at the margin of the posteromedial incision postoperatively. All healed in response conservative treatment. Another two patients experienced numbness in the posteromedial inferior region of the calf. No implant loosening, breakage, fixation failure, or other complication was observed during follow-up. CONCLUSIONS: LPCs are not uncommon. Careful preoperative analysis of computed tomography images and impeccable preparation are necessary to avoid neglecting a posterolateral column fracture. It is inappropriate to generalize one scenario for all Schatzker type II fractures: a single approach cannot address all subtypes of these fractures. Dual-plate fixation via a combined approach is an effective treatment for LPCs.

Percutaneous drainage of Morel-Lavallée lesions when the diagnosis is delayed.

SUMMARY: Morel-Lavallée lesions are a closed internal degloving, and open débridement can damage the only remaining blood supply to the skin. We performed percutaneous draining and débridement to treat 8 patients in whom the diagnosis of Morel-Lavallée lesions was delayed more than 1 week. Here we discuss our treatment procedures and the outcomes in these 8 patients. We consider percutaneous drainage to be an effective treatment for patients with delayed diagnosis of Morel-Lavallée lesions.

Comparing approaches to expose type C fractures of the distal humerus for ORIF in elderly patients: six years clinical experience with both the triceps-sparing approach and olecranon osteotomy.

BACKGROUND: Although open reduction and internal fixation (ORIF) is a standard fracture treatment method, the optimal way to expose a fracture prior to ORIF is debated. We compared the effects of two exposure methods, the triceps-sparing approach and olecranon osteotomy, on the functional outcomes of ORIF-treated type C distal humerus fractures in elderly people. METHODS: From January 2006 to January 2011, 75 elderly patients with type C distal humerus fractures were treated with ORIF, and we retrospectively reviewed their medical records, radiographs, and follow-up charts to identify any complications. Patients' Mayo Elbow Performance Score (MEPS) and range of motion were determined at their final clinic visit. RESULTS: Sixty-seven patients (89 %) attended the final visit. Of these patients, 36 received olecranon osteotomy and 31 received the triceps-sparing approach. For patients with type C1 and C2 fractures, we observed reductions in procedure times, blood loss, complication rates, and MEPS outcomes (all P < 0.01) with the triceps-sparing approach compared with olecranon osteotomy. Except for MEPS outcomes, all of these approach-related improvements were also statistically significantly for type C3 fractures (all P < 0.01). Overall, we did not observe any cases of fracture nonunion, implantation breakage or loosening, or elbow stiffening in our series. CONCLUSIONS: In our study, we found better functional outcomes for type C1 and C2 distal humerus fractures that were exposed using the triceps-sparing approach rather than olecranon osteotomy. Even for the most complex type of fracture, C3 fractures, similar recoveries in elbow function were achieved using either approach. LEVEL OF EVIDENCE: Level III.

Pathoanatomy and incidence of the posterolateral fractures in bicondylar tibial plateau fractures: a clinical computed tomography-based measurement and the associated biomechanical model simulation.

OBJECTIVES: The aim of our study is to evaluate the incidence and pathoanatomy of posterolateral fragments and analyze the associated fracture mechanism in bicondylar tibial plateau fractures. METHODS: From 1.1.2008 to 3.15.2012, all patients suffering bicondylar tibial plateau fractures were identified, scanned and analyzed at the Shanghai Clinical Trauma Center. Furthermore cadaver knees were selected into three groups of 30/60/90 knee flexion to simulate the posterolateral tibial plateau fracture by an impact device. RESULTS: One hundred and sixty-four (44.32 %) bicondylar tibial plateau fractures finally satisfied our requirements. Fifty-three and ninety-four cases were measured eventually in the groups of posterolateral split and depression. The posterolateral articular fragment proportion was 15.43 %. The posterolateral articular fragment angle showed an average of 12.94°. The posterolateral fragment cortical height was on average 2.96 cm. The posterolateral sagittal fragment angle averaged at 72.06°. Ninety-four cases were measured in the posterolateral depression group. The average posterolateral articular depression proportion was 16.74 %. The average posterolateral articular depression height was 2.47 cm. In the biomechanical modeling of such kinds of fracture patterns, posterolateral split fractures in 30° and 60° flexion are significantly more than those in 90° flexion. Posterolateral splits combined with anterolateral depression fractures in 30° flexion are significantly more than those in 90° flexion. CONCLUSION: The incidence of posterolateral fractures is 44.32 % in bicondylar tibial plateau fractures. The morphology of posterolateral area can be referenced for the surgeon in the future clinical work. The information is also helpful for the design of locking plate and fracture modeling in biomechanical test. In addition, that posterolateral split and posterolateral depression might be caused by different injury mechanisms. Different angles of knee flexion under the axial impact loading are possibly the interpretations for these two fracture patterns.

Anatomical evaluation of the modified posterolateral approach for posterolateral tibial plateau fracture.

OBJECTIVE: The study was undertaken to evaluate the efficacy and safety of a posterolateral reversed L-shaped knee joint incision for treating the posterolateral tibial plateau fracture. METHODS: Knee specimens from eight fresh, frozen adult corpses were dissected bilaterally using a posterolateral reversed L-shaped approach. During the dissection, the exposure range was observed, and important parameters of anatomical structure were measured, including the parameters of common peroneal nerve (CPN) to ameliorate the incision and the distances between bifurcation of main vessels and the tibial articular surface to clear risk awareness. RESULTS: The posterolateral aspect of the tibial plateau from the proximal tibiofibular joint to the tibial insertion of the posterior cruciate ligament was exposed completely. There was no additional damage to other vital structures and no evidence of fibular osteotomy or posterolateral corner complex injury. The mean length of the exposed CPN was 56.48 mm. The CPN sloped at a mean angle of 14.7° toward the axis of the fibula. It surrounded the neck of the fibula an average of 42.18 mm from the joint line. The mean distance between the opening of the interosseous membrane and the joint line was 48.78 mm. The divergence of the fibular artery from the posterior tibial artery was on average 76.46 mm from articular surface. CONCLUSIONS: This study confirmed that posterolateral reversed L-shaped approach could meet the requirements of anatomical reduction and buttress fixation for posterolateral tibial plateau fracture. Exposure of the CPN can be minimized or even avoided by modifying the skin incision. Care is needed to dissect distally and deep through the approach as vital vascular bifurcations are concentrated in this region. Placement of a posterior buttressing plate carries a high vascular risk when the plate is implanted beneath these vessels.

Biomechanical study of a new rim plate fixation strategy for two kinds of posterolateral depression patterns of tibial plateau fractures: a finite element analysis.

PURPOSE: The biomechanical capacity of "Barrel Hoop Plate (BHP)" in the treatment of the posterolateral tibial plateau (PL) depression fractures remains unknown. In this study, two kinds of posterolateral tibial plateau depression models involving mild slope-type depression fracture (MSDF) and local sink hole-type depression fracture (LSDF) were created to test and compare the biomechanical capacities of BHP with the other two conventional fixations (Anterolateral Plate and Posterolateral Plate, ALP and PLP) by finite element analysis. METHODS: The 3D models of three kinds of plate-screw systems and the two kinds of PL-depression models (MSDF and LSDF) were created. An axial force of 400N was applied from the distal femur to the tibial plateau. The maximal displacements of the posterolateral fractures (PLFs), the distribution on the PLFs articular surface and key points displacements were measured. Stresses in the fixation complex including the maximal Equivalent (von-Mises) Stress of implants, the max shear stress of PLFs and stiffness of the fixation were calculated. RESULTS: The maximal displacement of MSDF was least in Group BHP. The maximal displacement of LSDF was least in Group ALP. In MSDF, BHP showed the best rim fix effect in MSDF, but unsatisfactory results in LSDF. In both MSDF and LSDF, the greatest max Equivalent Stress of the plate and the screw occurred in the PLP system. ALP and BHP showed a comparable stiffness in MSDF and ALP had the strongest stiffness in the fixation of LSDF. CONCLUSIONS: In MSDF, the BHP has the best biomechanical capacity, especially in displacements of key points such as the PL rim, fracture line, and depression center. In LSDF, the ALP system shows the best biomechanical effect. Although the PLP has the best fixation effect on the posterior wall, it is not suitable for PL-depression fracture fixation.

Minimally invasive fluoro-navigation screw fixation for the treatment of pelvic ring injuries.

Intensive use of intraoperative fluoroscopy is mandatory to achieve good accuracy and avoid neural or vascular injury and may prolong surgical time and increase exposure-related hazards. New methods of percutaneous treatment in conjunction with innovative fluoroscopy-based computerized navigation have evolved in an attempt to overcome the existing difficulties. This report described our experience in applying fluoroscopic surgical navigation technique and evaluated its clinical application to pelvic ring injuries, including its feasibility, merits and limitations. Twenty-two patients with pelvic ring injuries were treated with percutaneous pubic ramus screw and sacroiliac screw techniques under the guidance of a fluoroscopy-based navigation system. A total of forty-four screws were inserted, including twenty-seven pubic ramus screws and seventeen sacroiliac screws. The average operation time and the average fluoroscopy time per screw were 23.6 minutes and 22.2 seconds respectively. Compared to the final position of the screw, the average deviated distance of wire tip was 2.8 mm and the average trajectory difference was 2.6°. A ventral cortex perforation of the sacrum was found in one sacroiliac screw without any clinical symptoms. No superficial or deep infection occurred. No patient sustained recognized neurologic, vascular, or urologic injury as a result of percutaneous screw fixation of pubic ramus fractures, sacroiliac disruptions, or sacral fractures. Our results showed that fluoroscopy-based navigation technique for the pelvic ring injuries could become a safe and effective alterative method for the treatment of pelvic ring injuries in some selected patients.

Novel Rim Plating Technique for Treatment of the Inferior Pole Fracture of the Patella.

To aim of the present paper was to introduce a novel fixation technique for the treatment of inferior pole fracture of the patella. We performed a prospective observational study of consecutive cases of inferior pole fracture of the patella that were treated at our institution between January 2018 and June 2019. The patients include three men and one woman, with an average age of 47 years (range: 42-59 years). All patients were treated with the novel rim plating fixation technique for preserving the inferior pole of the patella. During the surgery, a 2.4 mm straight locking compression plate was contoured to adapt to the arc of the lower half of the patella as the rim plate. After reduction of the fracture, the rim plate was fixed to the proximal fragment of the patella through multiple locking screws, against the continuous pull of the patellar tendon. The rim plate encircles and constricts the inferior pole fragments, functioning as a compression and blocking construct. If necessary, an additional anterior tension band or mini locking plate can be used to further prevent anterior displacement of the inferior pole fragments. Under this rigid fixation, motion of the knee and full weight-bearing were encouraged postoperatively. The patients were followed up monthly until 12 months after surgery. The time to achieve 90°pain-free, full range of motion of the knee, and fracture healing, were recorded. Related complications were monitored, including infection, loss of reduction, fixation failure, anterior knee pain, and soft-tissue irritation. The modified Cincinnati knee rating system was used for knee function assessment. The average operative time was 58.8 min (range: 52-63 min). The average blood loss was 59.8 mL (range: 45-71 mL). For all patients, pain-free 90° range of motion was restored in 2-4 weeks, and the full range of motion was restored in 8-11 weeks. All patients achieved bone union in 6-9 weeks with no displacement of the fragments or breakage of the implant. No patient complained of anterior knee pain or soft-tissue irritation. The modified Cincinnati score at 12-month follow up demonstrated excellent outcomes in all four patients. The rim plating technique may be a feasible option for the treatment of the inferior pole fracture of the patella.

Patient expectations predict outcomes following distal radius fracture: a prospective cohort study using the TEFTOM questionnaire.

INTRODUCTION: The relationship between patient expectations and clinical outcomes has recently been of increasing interest in the field of orthopaedics. The objective of this study was to evaluate the relationships between (1) patient pre-treatment expectations and post-treatment clinical outcomes, and (2) fulfillment of expectations and patient satisfaction, following distal radius fracture. METHODS: This was a prospective multicenter cohort study conducted across three hospitals. A total of 133 patients admitted to hospital between 2016 and 2018 with a distal radius fracture were recruited. Patients were administered the Trauma Expectation Factor (TEF) at baseline to measure expectations of pain and functioning at one-year post-injury. Patients were followed up at 6 and 12 months post-injury and outcomes were measured using the Trauma Outcome Measure (TOM), Shortened Disabilities of the Arm, Shoulder and Hand (QuickDASH) questionnaire, and Short-Form 12-item (SF-12) health survey. Fulfillment of expectations was measured as TEF score minus TOM score at each time point. Patient satisfaction was also measured using the Patient Satisfaction Questionnaire Short Form (PSQ-18). Multivariate regression models were created to evaluate the effect of expectations on outcomes. RESULTS: Patient expectations correlated moderately with outcomes at 6 and 12 months post-injury. In the multivariate analysis, patient expectations were predictive of better outcomes at 6 and 12 months. Injury severity, age, mechanism of injury, and whether the injury occurred on duty also contributed significantly to one or more regression models. Patient satisfaction correlated weakly with fulfillment of expectations at 6 months, but moderately with all outcome scores. At 12 months, satisfaction did not correlate significantly with expectations fulfillment but correlated moderately to highly with all outcome scores. CONCLUSION: Patient expectations independently predicted outcomes at 6 and 12 months post-injury. Standardized assessment and management of patient expectations may be relevant to future clinical practice and research to best quantify and optimize patient outcomes.

Biomechanical analysis of "Barrel hoop plate" technique for the posterolateral fragments of tibial plateau fractures with different displacement tendency.

OBJECTIVES: The purpose of our study is to evaluate the three-dimensional biomechanical properties of "Barrel Hoop plate" in two kinds of artificial posterolateral tibial plateau fracture fragment (PLF) by using of synthetic models, each of which has an initial amplifying displacement tendency. MATERIAL AND METHODS: Thirty-six tibiae models were randomly assigned into two groups with different displacement tendencies: posterior displacement (PD) and lateral displacement (LD). Each model was then fixed with three patterns: Anterolateral plate (AP), Posterolateral plate (PP), and "Barrel Hoop plate" (BHP). Displacement in three axes of vertical, sagittal and horizontal axis was captured by Optotrak Certus motion analysis system. Bluehill 2 software was used for load control and data collection. RESULTS: In Model-PD, when the load was over 1000 N, the posterior displacement of Group-PP and Group-BHP were less than Group-AP (P<0.01). The inferior displacement in the vertical axis of Group-PP was larger than both Group-AP and Group-BHP in all the loading set (P<0.01). In Model-LD, both of the lateral displacement in Group-AP and Group-BHP was less than that of Group-PP when the load was over 1000 N (P<0.01). The inferior displacement of Group-AP was less than that of Group-PP in the load of 1500 N (P<0.01). Both of the posterior displacement of Group-AP and Group-BHP was less than that of Group-PP when the loading was 1500 N (P<0.01). The stiffness of Group PP was less than that of Group AP (P<0.01). CONCLUSIONS: The results demonstrated that the 2.7 mm "Barrel Hoop plate" had a greater capacity of anti-three-dimension axes displacement of PLF. The 3.5 mm Anterolateral plate had the advantage in anti-lateral displacement and anti-inferior displacement but was weak at anti-posterior displacement of PLF. The 2.7 mm Posterolateral plate was stronger in anti-posterior, however, weak in anti-inferior displacement capacity.

Evaluation of an expectation and outcome measurement questionnaire in ankle fracture patients: The Trauma Expectation Factor Trauma Outcomes Measure (TEFTOM) Eurasia study.

BACKGROUND: The Trauma Expectation Factor Trauma Outcomes Measure (TEFTOM) questionnaire is a self-administered, patient-rated outcome measurement questionnaire designed to measure both 'expectation' and 'outcome' in orthopaedic trauma patients using two subsets of 10 items. We aimed to validate this instrument in a culturally diverse cohort of patients recruited from Asian and European regions. METHODS: A total of 193 adult patients with surgically treated AO Foundation/Orthopaedic Trauma Association types 43 and 44 ankle malleolar and distal tibia fractures were recruited with 158 followed up till 1 year. Expectations were assessed prior to surgery, at 2 weeks and after 6 months using the trauma expectation factor (TEF) score. Outcomes were evaluated at 2 weeks, 6 and 12 months using the trauma outcome measure (TOM), American Academy of Orthopaedic Surgeons (AAOS), foot and ankle outcome score (FAOS) and short form-36 (SF-36) questionnaires. Psychometric properties of TEFTOM were assessed. RESULTS: TEF and TOM demonstrated good internal consistency (Cronbach's α > 0.87) and reliability at all time points (intra-class correlation coefficients > 0.90). TOM showed strong correlations (R2 ≥ 0.60) with the AAOS foot and ankle score, all FAOS subscales, except 'symptoms' and SF-36 physical functioning, role physical, bodily pain, social functioning and the physical component summary at 6 and 12 months. Effect sizes for TOM were 2.30 and 0.74 from 2 weeks to 6 months and from 6 months to 12 months, respectively. The baseline patient TEF was predictive for the 1-year TOM score. CONCLUSIONS: TEFTOM demonstrated good psychometric properties in this cohort of patients with ankle fractures. The TEF 'expectation' score was predictive of the TOM 'outcome' score. We recommend researchers and clinicians to utilize TEFTOM when patient expectation measurement is concerned for orthopaedic trauma patients.

Fractures of the distal tibia treated with polyaxial locking plating.

We evaluated the healing rate, complications, and functional outcomes in 32 adult patients with very short metaphyseal fragments in fractures of the distal tibia treated with a polyaxial locking system. The average distance from the distal extent of the fracture to the tibial plafond was 11 mm. All fractures healed and the average time to union was 14 weeks. Six patients (19%) reported occasional local disturbance over the medial malleolus. There were two cases of postoperative superficial infections and evidence of delayed wound healing. Using the American Orthopaedic Foot and Ankle Society ankle score, the average functional score was 87.3 points (of 100 total possible points). Our results show the polyaxial locking plates, which offer more fixation versatility, may be a reasonable treatment option for distal tibia fractures with very short metaphyseal segments.

Initiatory biomechanical study on humeral head migration after coracoacromial ligament cut.

OBJECT: To design and evaluate the strength of muscles in preventing humeral head migration after acromioplasty by biomechanical research on cadaver models. METHODS: Six fresh shoulder cadavers were studied. The coracoacromial ligament cut model was prepared in five shoulders for the study. Different forces were applied to the head of humerus with designed strengthened force on rotator cuff muscles. The results were calculated with SPSS software. RESULTS: The anterior and superior pulling force caused obvious migration of humeral head in coracoacromial ligament cut model; after strengthening the rotator cuff muscles, especially the supraspinatus and subscapular muscle, the humeral head migration was reduced. CONCLUSION: Modified acromioplasty with supraspinatus and subscapular muscle, strengthened in our experiment, helped to control the migration of humeral head.

Interlocking Intramedullary Nailing Versus Locked Dual-Plating Fixation for Femoral Shaft Fractures in Patients with Multiple Injuries: A Retrospective Comparative Study.

PURPOSE: Intramedullary nailing (IMN) is a popular method in the management of femoral shaft fractures (FSFs). However, whether the association of IMN with pulmonary fat emboli can compromise the pulmonary and nervous systems is debatable. The purpose of this study is to compare IMN with the locked dual plating (LDP) method by assessing the clinical outcomes of FSF patients with head or chest injury. METHOD: A total of 126 FSF patients were included in this study between January 2010 and July 2016 and divided into LDP and IMN groups. Patient demographic characteristics, operative time, blood loss, Harris Hip Score, Lysholm Knee Score, radiological outcomes, and systemic complications were collected and compared between the two treatment groups. Patients were followed up for at least 12 months. RESULTS: The LDP group performed better than IMN in terms of operative time, estimated blood loss amount, and malunion rate. Differences in function scores, fracture union rate, overall pulmonary complication rate, and in-hospital mortality between the two groups were not significant. Average radiographic union time was significantly longer in the LDP group (36.3 weeks) than in the IMN group (32.5 weeks). One case of fixation failure occurred postoperatively in the LDP group, whereas one case of fracture nonunion took place in the IMN group. CONCLUSION: Our findings suggest that dual-plating fixation is a promising method for FSFs with multiple injuries. However, the retrospective nature of this study necessitates high-quality trials to be performed to assess the clinical efficiency of dual plating.

Medial Open-wedge Osteotomy with Double-plate Fixation for Varus Malunion of the Distal Femur.

OBJECTIVE: To present our clinical experience of treating varus malunion of the distal femur through a medial open-wedge osteotomy with double-plate fixation. METHODS: A prospective cohort study was performed. From January 2005 to February 2015, 15 consecutive patients with varus malunion following distal femur fractures were surgically treated at a single level I trauma center. The coronal and sagittal deformity were corrected by a medial open-wedge osteotomy of the distal femur. A medial buttress plate was used to maintain the realignment. A lateral locking plate was additionally used as a protection plate. The mean age of patients at the time of the surgery was 35.5 years (range, 22-58 years). The radiographical evaluation included the mechanical femorotibial angle, the mechanical lateral distal femoral angle, the anatomic posterior distal femoral angle, and the leg length discrepancy. Clinical outcome evaluation consisted of the range of motion (ROM) and Hospital for Special Surgery (HSS) score. RESULTS: Mean follow-up was 7.4 years (range, 4-11.5 years). Varus and flexion malalignment and limb discrepancy were adequately corrected in all patients. The mechanical femorotibial angle, the mechanical lateral distal femoral angle, and the anatomic posterior distal femoral angle were restored from 17.5° (range, 13°-25°) to 2.3° (range, - 2°-7°), 102.3° (range, 95°-112°) to 85.2° (range, 81°-92°), and 77.1° (range, 65°-87°) to 82.7° (range, 76°-88°), respectively. The leg length discrepancy was diminished from 3.4 cm (range, 2.4-4.5 cm) to 0.8 cm (range, 0-1.7 cm). The average bone healing time was 4.1 months (range, 2.5-6 months). The average ROM of the affected knees at 24-month follow-up was 3.4°-112.55°. The score of HSS at 4-years follow-up was 76.1 (range, 64-88). No internal fixation failure or secondary operation was noted until the last follow-up. CONCLUSION: Medial open-wedge osteotomy can adequately correct the posttraumatic varus malunion of the distal femur. With fixation of the double plate, non-displaced bone healing and good functional outcome are expected.

Biomechanical evaluation of different fixation methods for fracture dislocation involving the proximal tibia.

BACKGROUND: Fracture dislocations of the knee involving the proximal tibia are difficult to treat because of the operative approach that maybe required and the instability of the construct. The optimal fixation method of these fractures remains controversial, improper fixations usually lead to an unsatisfactory prognosis. The purpose of this study was to compare the mechanical strength of four different fixation constructs for this kind of fracture. METHODS: Twenty-eight Synbone simulated fracture models were created, reduced, and instrumented with one of four constructs: medial single plate, medial double plates, bilateral double plates, or lateral locked plate. Biomechanical testing was done to determine the postfixation construct stiffness, the maximum load to failure, and the medial condylar displacement for each of the four constructs. FINDINGS: The medial double plates construct was shown to provide the highest overall construct stiffness and the least medial condylar displacement than each of the other three constructs (both P=0.000); The lateral locked plate construct was shown to provide the lowest overall construct stiffness and the largest medial condylar displacement than each of the other three constructs (both P=0.000); There was no significant difference measured between the medial single plate construct and the bilateral double plates construct for overall construct stiffness and medial condylar displacement. INTERPRETATION: This study suggests that the medial double plates technique is biomechanically the best fixation method for fracture dislocations involving the proximal tibia, while lateral locked plate technique is not indicated to this kind of fracture due to its insufficient stability.

A comparative study of Less Invasive Stabilization System (LISS) fixation and two-incision double plating for the treatment of bicondylar tibial plateau fractures.

The present investigation is a prospective study comparing the use of locked plates and classic double plates for the repair of bicondylar tibial plateau fractures. Eighty-four patients with bicondylar tibial plateau fractures were treated with plate fixation by either a locked plate (Less Invasive Stabilization System, LISS) or classic double plates (DP). All patients were followed for a minimum of 24 months. Outcomes were assessed by recording the surgical experience with each approach, post-operative complications and improvements in knee function as measured by the Hospital for Special Surgery (HSS) score. For all patients, no differences in the mechanisms of injury, fracture type, open fracture grade, mean age, gender distribution, associated medical conditions, pre-surgical stay, surgical time, bony union rate or radiographic healing times were observed between the two groups. Also, the HSS score and incidences of infection, seroma, hematoma, deep venous thrombosis, loss of reduction, loss of alignment, hardware failure and overall post-operative complications were all similar in both groups (P>0.05). Wound size and blood loss were significantly less in the LISS group than in the DP group (both P<0.05). A significantly higher incidence of post-operative malalignment of the proximal tibia (P=0.041) and a trend toward significance of a higher incidence of symptomatic hardware irritation (P=0.057) were observed in the LISS group compared to the DP group. In conclusion, LISS provides an alternative treatment for bicondylar tibial plateau fractures, but it may not replace the conventional two-incision double plating technique as the standard of care.