RESUMEN
Two-dimensional covalent organic frameworks (COFs) are an emerging class of photocatalytic materials for solar energy conversion. In this work, we report a pair of structurally isomeric COFs with reversed imine bond directions, which leads to drastic differences in their physical properties, photophysical behaviors, and photocatalytic CO2 reduction performance after incorporating a Re(bpy)(CO)3Cl molecular catalyst through bipyridyl units on the COF backbone (Re-COF). Using the combination of ultrafast spectroscopy and theory, we attributed these differences to the polarized nature of the imine bond that imparts a preferential direction to intramolecular charge transfer (ICT) upon photoexcitation, where the bipyridyl unit acts as an electron acceptor in the forward imine case (f-COF) and as an electron donor in the reverse imine case (r-COF). These interactions ultimately lead the Re-f-COF isomer to function as an efficient CO2 reduction photocatalyst, while the Re-r-COF isomer shows minimal photocatalytic activity. These findings not only reveal the essential role linker chemistry plays in COF photophysical and photocatalytic properties but also offer a unique opportunity to design photosensitizers that can selectively direct charges.
RESUMEN
ConspectusMetal chalcogenide quantum dots (QDs) are prized for their unique and functional properties, associated with both intrinsic (quantum confinement) and extrinsic (high surface area) effects, as dictated by their size, shape, and surface characteristics. Thus, they have considerable promise for diverse applications, including energy conversion (thermoelectrics and photovoltaics), photocatalysis, and sensing. QD gels are macroscopic porous structures consisting of interconnected QDs and pore networks in which the pores may be filled with solvent (i.e., wet gels) or air (i.e., aerogels). QD gels are unique because they can be prepared as macroscale objects while fully retaining the size-specific quantum-confined properties of the initial QD building blocks. The extensive porosity of the gels also ensures that each QD in the gel network is accessible to the ambient, leading to high performance in applications that require high surface areas, such as (photo)catalysis and sensing.Metal chalcogenide QD gels are conventionally prepared by chemical approaches. We recently expanded the toolbox for QD gel synthesis by developing electrochemical gelation methods. Relative to conventional chemical oxidation approaches, electrochemical assembly of QDs (1) enables the use of two additional levers for tuning the QD assembly process and gel structure: electrode material and potential, and (2) allows direct gel formation on device substrates to simplify device fabrication and improve reproducibility. We have discovered two distinct electrochemical gelation methods, each of which enables the direct writing of gels on an active electrode surface or the formation of free-standing monoliths. Oxidative electrogelation of QDs leads to assemblies bridged by dichalcogenide (covalent) linkers, whereas metal-mediated electrogelation proceeds via electrodissolution of active metal electrodes to produce free ions that link QDs by binding to pendant carboxylate functionalities on surface ligands (non-covalent linkers). We further demonstrated that the electrogel composition produced from the covalent assembly could be modified by controlled ion exchange to form single-ion decorated bimetallic QD gels, a new category of materials. The QD gels exhibit unprecedented performance for NO2 gas sensing and unique photocatalytic reactivities (e.g., the "cyano dance" isomerization and the reductive ring-opening arylation). The chemistry unveiled during the development of electrochemical gelation pathways for QDs and their post-modification has broad implications for guiding the design of new nanoparticle assembly strategies and QD gel-based gas sensors and catalysts.
RESUMEN
This report benchmarks a tris(amino)cyclopropenium (TAC) salt as an electron-transfer mediator for anodic oxidation reactions in comparison to two known mediators: a triarylamine and a triarylimidazole derivative. The three mediators have redox potentials, diffusion coefficients, and heterogeneous electron transfer rates similar to those of glassy carbon electrodes in acetonitrile/KPF6. However, they differ significantly in their performance in two electro-organic reactions: anodic fluorination of a dithiane and anodic oxidation of 4-methoxybenzyl alcohol. These differences are rationalized based on variable stability in the presence of reaction components (e.g., NEt3·3HF, lutidine, and Cs2CO3) as well as very different rates of electron transfer with the organic substrate. Overall, this work highlights the advantages and disadvantages of each mediator and provides a foundation for expanding the applications of TACs in electro-organic synthesis moving forward.
RESUMEN
Here, we report a proof-of-concept resistive pulse method for analyzing chiral amino acids utilizing metal-amino acid crystallization differences. This method involves introducing an amino acid sample solution into a micropipette through a pressure-driven flow. The sample then mixes with a metal ion solution inside the pipette, forming metal-amino acid crystals. The crystal size depends on the enantiomeric excess (x) of chiral amino acid samples. Large x values lead to large crystals. The crystal size difference is then reflected in the resistive pulse size as they block the ionic transport in a micropipette to different extents. We used Cd-cystine crystallization as a model system and found approximately five times the mean current pulse size difference for racemic (x = 0) and L-only (x = +1) cystine samples. A similar result was observed for aspartate. Our discovery opens up new opportunities for micro/nanoscopic chiral amino acid analysis, which can potentially be used in single-cell analysis.
Asunto(s)
Aminoácidos , Cristalización , Estereoisomerismo , Aminoácidos/química , Cistina/química , Cadmio/química , Ácido Aspártico/química , Metales/químicaRESUMEN
OBJECTIVE: The purpose of this study is to compare the clinical efficacy of oral dydrogesterone and micronized vaginal progesterone (MVP) gel during the first HRT-FET cycle. METHODS: A retrospective cohort study based on a total of 344 women undergoing their first HRT-FET cycles without Gonadotropin-Releasing Hormone agonist (GnRH-a) pretreatment was conducted. All the cycles were allocated to two groups in the reproductive medical center at the University of Hong Kong-Shenzhen Hospital. One group (n = 193) received oral dydrogesterone 30 mg/d before embryo transfer, while the other group (n = 151) received MVP gel 180 mg/d. RESULTS: The demographics and baseline characteristics of two groups were comparable. We found no statistically significant difference in live birth rate (24.35% vs. 31.13%, P = 0.16), clinical pregnancy rate (34.72% vs. 36.42%, P = 0.74), embryo implantation rate (25.09% vs. 28.36%, P = 0.43), positive pregnancy rate (42.49% vs 38.41%, P = 0.45), miscarriage rate (9.33% vs 3.97%, P = 0.05), or ectopic pregnancy rate (0.52% vs. 0.66%, P = 0.86) between the oral dydrogesterone group and MVP gel group. In the multivariate logistic regression analysis for covariates, medication used for luteal support was not associated with live birth rate (OR = 0.73, 95% CI: 0.32-1.57, P = 0.45). And the different luteal support medication did not have a significant positive association with the live birth rate in the cycles with day 2 embryo transferred (OR = 1.39, 95% CI:0.66-2.39, P = 0.39) and blastocyst transferred (OR = 1.31 95% CI:0.64-2.69, P = 0.46). CONCLUSION: 30 mg/d oral dydrogesterone and 180 mg/d MVP gel revealed similar reproductive outcomes in HRT-FET cycles in the study.
Asunto(s)
Didrogesterona , Progesterona , Embarazo , Femenino , Humanos , Progesterona/uso terapéutico , Estudios Retrospectivos , Índice de Embarazo , Transferencia de Embrión , LuteínaRESUMEN
INTRODUCTION: The root of Bupleurum scorzonerifolium Willd. (BS) is officially recognized in the Chinese Pharmacopoeia. In contrast, the aerial part of BS (ABS), accounting for 80% of BS, is typically discarded, causing potential waste of medicinal resources. ABS has shown benefits in the treatment of inflammation-related diseases in China and Spain, and the material basis underlying its anti-inflammatory effects must be systematically elucidated for the rational use of ABS. OBJECTIVE: We aimed to screen and validate the anti-inflammatory quality markers (Q-markers) of ABS and to confirm the ideal time for ABS harvesting. METHODS: The chemical components and anti-inflammatory effects of ABS from 10 extracted parts were analyzed by UPLC-Q-TOF-MS/MS and in a lipopolysaccharide (LPS)-induced cell model. Anti-inflammatory substances were screened by Pearson bivariate analysis and gray correlation analysis, and the anti-inflammatory effects were verified in a zebrafish tail-cutting inflammation model. HPLC was applied to measure the Q-marker contents of ABS in different harvesting periods. RESULTS: Ten ABS extracts effectively alleviated the increase in LPS-induced proinflammatory cytokines in RAW 264.7 cells. Forty components were identified from them, among which 27 were common components. Eight components were correlated with anti-inflammatory effects, which were confirmed to reverse the expression of proinflammatory and anti-inflammatory factors in a zebrafish model. Chlorogenic acid, hypericin, rutin, quercetin, and isorhamnetin can be detected by HPLC, and the maximum contents of these five Q-markers were obtained in the sample harvested in August. CONCLUSION: The anti-inflammatory Q-markers of ABS were elucidated by chromatographic-pharmacodynamic-stoichiometric analysis, which served as a crucial basis for ABS quality control.
Asunto(s)
Bupleurum , Espectrometría de Masas en Tándem , Ratones , Animales , Pez Cebra , Cromatografía Líquida de Alta Presión , Bupleurum/química , Células RAW 264.7 , Lipopolisacáridos/farmacología , Antiinflamatorios/farmacología , Antiinflamatorios/análisis , Inflamación/tratamiento farmacológico , Componentes Aéreos de las Plantas/químicaRESUMEN
Here, we report CdS quantum dot (QD) gels, a three-dimensional network of interconnected CdS QDs, as a new type of direct hydrogen atom transfer (d-HAT) photocatalyst for C-H activation. We discovered that the photoexcited CdS QD gel could generate various neutral radicals, including α-amido, heterocyclic, acyl, and benzylic radicals, from their corresponding stable molecular substrates, including amides, thio/ethers, aldehydes, and benzylic compounds. Its C-H activation ability imparts a broad substrate and reaction scope. The mechanistic study reveals that this reactivity is intrinsic to CdS materials, and the neutral radical generation did not proceed via the conventional sequential electron transfer and proton transfer pathway. Instead, the C-H bonds are activated by the photoexcited CdS QD gel via a d-HAT mechanism. This d-HAT mechanism is supported by the linear correlation between the logarithm of the C-H bond activation rate constant and the C-H bond dissociation energy (BDE) with a Brønsted slope α=0.5. Our findings expand the currently limited direct hydrogen atom transfer photocatalysis toolbox and provide new possibilities for photocatalytic C-H activation.
RESUMEN
The functional group compatibility of an electrosynthetic method is typically limited by its potential reaction window. Here, we report that alternating current (AC) electrolysis can overcome such potential window-limited functional group compatibility. Using alkene heterodifunctionalization as a model system, we design and demonstrate a series of AC-driven reactions that add two functional groups sequentially and separately under the cathodic and anodic pulses, including chloro- and bromotrilfuoromethylation as well as chlorosulfonylation. We discovered that the oscillating redox environment during AC electrolysis allows the regeneration of the redox-active functional groups after their oxidation or reduction in the preceding step. As a result, even though redox labile functional groups such as pyrrole, quinone, and aryl thioether fall in the reaction potential window, they are tolerated under AC electrolysis conditions, leading to synthetically useful yields. The cyclic voltammetric study has confirmed that the product yield is limited by the extent of starting material regeneration during the redox cycling. Our findings open a new avenue for improving functional group compatibility in electrosynthesis and show the possibility of predicting the product yield under AC electrolysis from voltammogram features.
RESUMEN
Here, we report an electrochemical protocol for hydrogen isotope exchange (HIE) at α-C(sp3)-H amine sites. Tetrahydroisoquinoline and pyrrolidine are selected as two model substrates because of their different proton transfer (PT) and hydrogen atom transfer (HAT) kinetics at the α-C(sp3)-H amine sites, which are utilized to control the HIE reaction outcome at different applied alternating current (AC) frequencies. We found the highest deuterium incorporation for tetrahydroisoquinolines at 0 Hz (i.e., under direct current (DC) electrolysis conditions) and pyrrolidines at 0.5 Hz. Analysis of the product distribution and D isotope incorporation at different frequencies reveals that the HIE of tetrahydroisoquinolines is limited by its slow HAT, whereas the HIE of pyrrolidines is limited by the overoxidation of its α-amino radical intermediates. The AC-frequency-dependent HIE of amines can be potentially used to achieve selective labeling of α-amine sites in one drug molecule, which will significantly impact the pharmaceutical industry.
RESUMEN
Here we report a highly efficient PFAS preconcentration method that uses anodically generated shrinking gas bubbles to preconcentrate PFAS via aerosol formation, achieving ~ 1400-fold enrichment of PFOS and PFOA-the two most common PFAS-in 20 min. This new method improves the enrichment factor by 15 to 105% relative to the previous method that uses cathodically generated H2 bubbles. The shrinking gas bubbles are in situ electrogenerated by oxidizing water in an NH4HCO3 solution. H+ produced by water oxidation reacts with HCO3- to generate CO2 gas, forming gas bubbles containing a mixture of O2 and CO2. Due to the high solubility of CO2 in aqueous solutions, the CO2/O2 bubbles start shrinking when they leave the electrode surface region. A mechanistic study reveals two reasons for the improvement: (1) shrinking bubbles increase the enrichment rate, and (2) the attractive interactions between the positively charged anode and negatively charged PFAS provide high enrichment at zero bubble path length. Based on this preconcentration method, we demonstrate the detection of ≥ 70 ng/L PFOA and PFOS in water in ~ 20 min by coupling it with our bubble-nucleation-based detection method, fulfilling the need of the US Environmental Protection Agency.
Asunto(s)
Ácidos Alcanesulfónicos , Fluorocarburos , Contaminantes Químicos del Agua , Estados Unidos , Dióxido de Carbono , Fluorocarburos/análisis , Contaminantes Químicos del Agua/análisis , Agua , United States Environmental Protection AgencyRESUMEN
Here, we report a unique electrosynthetic method that enables the selective one-electron oxidation of tertiary amines to generate α-amino radical intermediates over two-electron oxidation to iminium cations, providing easy access to arylation products by simply applying an optimal alternating current (AC) frequency. More importantly, we have discovered an electrochemical descriptor from cyclic voltammetry studies to predict the optimal AC frequency for various amine substrates, circumventing the time-consuming trial-and-error methods for optimizing reaction conditions. This new development in AC electrolysis provides an alternative strategy to solving challenging chemoselectivity problems in synthetic organic chemistry.
Asunto(s)
Aminas , Electrones , Cationes , Electrólisis , Oxidación-ReducciónRESUMEN
Crown roots (CRs) are major components of the rice root system. They form at the basal node of the shoot, and their development is greatly influenced by environmental factors. Ammonium nitrogen is known to impact plant root development through ammonium transporters (AMTs), but it remains unclear whether ammonium and AMTs play roles in rice CR formation. In this study, we revealed a significant role of ammonium, rather than nitrate, in regulating rice CR development. High ammonium supply increases CR formation but inhibits CR elongation. Genetic evidence showed that ammonium regulation of CR development relies on ammonium uptake mediated jointly by ammonium transporters OsAMT1;1, OsAMT1;2; OsAMT1;3, and OsAMT2;1, but not on root acidification which was the result of ammonium uptake. OsAMTs are also needed for glutamine-induced CR formation. Furthermore, we showed that polar auxin transport dependent on the PIN auxin efflux carriers acts downstream of ammonium uptake and assimilation to activate local auxin signaling at CR primordia, in turn promoting CR formation. Taken together, our results highlight a critical role for OsAMTs in cooperatively regulating CR formation through regulating auxin transport under nitrogen-rich conditions.
Asunto(s)
Compuestos de Amonio , Proteínas de Transporte de Catión , Oryza , Compuestos de Amonio/metabolismo , Proteínas de Transporte de Catión/genética , Proteínas de Transporte de Catión/metabolismo , Regulación de la Expresión Génica de las Plantas , Ácidos Indolacéticos , Nitrógeno/metabolismo , Oryza/fisiología , Proteínas de Plantas/genética , Proteínas de Plantas/metabolismo , Raíces de Plantas/metabolismoRESUMEN
High levels of ammonium nutrition reduce plant growth and different plant species have developed distinct strategies to maximize ammonium acquisition while alleviating ammonium toxicity through modulating root growth. To date, the mechanisms underlying plant tolerance or sensitivity towards ammonium remain unclear. Rice (Oryza sativa) uses ammonium as its main N source. Here we show that ammonium supply restricts rice root elongation and induces a helical growth pattern, which is attributed to root acidification resulting from ammonium uptake. Ammonium-induced low pH triggers the asymmetric distribution of auxin in rice root tips through changes in auxin signaling, thereby inducing a helical growth response. Blocking auxin signaling completely inhibited this root response. In contrast, this root response is not activated in ammonium-treated Arabidopsis. Acidification of Arabidopsis roots leads to the protonation of indole-3-acetic acid and dampening of the intracellular auxin signaling levels that are required for maintaining root growth. Our study suggests a different mode of action by ammonium on the root pattern and auxin response machinery in rice versus Arabidopsis, and the rice-specific helical root response towards ammonium is an expression of the ability of rice to moderate auxin signaling and root growth to utilize ammonium while confronting acidic stress.
Asunto(s)
Compuestos de Amonio/metabolismo , Oryza/fisiología , Reguladores del Crecimiento de las Plantas/metabolismo , Transducción de Señal , Arabidopsis/fisiología , Ácidos Indolacéticos/metabolismo , Nitrógeno/metabolismo , Oryza/crecimiento & desarrollo , Raíces de Plantas/crecimiento & desarrollo , Raíces de Plantas/fisiología , Estrés FisiológicoRESUMEN
Gas bubbles are easily accessible and offer many unique characteristic properties of a gas/liquid two-phase system for developing new analytical methods. In this minireview, we discuss the newly developed analytical strategies that harness the behaviors of bubbles. Recent advancements include the utilization of the gas/liquid interfacial activity of bubbles for detection and preconcentration of surface-active compounds; the employment of the gas phase properties of bubbles for acoustic imaging and detection, microfluidic analysis, electrochemical sensing, and emission spectroscopy; and the application of the mass transport behaviors at the gas/liquid interface in gas sensing, biosensing, and nanofluidics. These studies have demonstrated the versatility of gas bubbles as a platform for developing new analytical strategies.
RESUMEN
The d-band model has proven to be effective for understanding trends in the chemisorption of various adsorbates on transition metal surfaces. However, hydrogen adsorption at the atop site of transition metals and their bimetallic alloy surfaces do not always correlate well with the d-band center of the adsorption site. Additionally, the d-band model cannot explain the disappearance of the local minima for H adsorption at the hollow site on the potential energy surface of 5d single-atom element doped Au and Ag(111) surfaces. Here, we use a simple model with factors, including the d-band center, filling of the d-band, renormalized adsorbate states, coupling matrix elements, and surface-adsorbate bond lengths, to correlate with the density functional theory calculated H binding energies on both mono- and bimetallic (111) surfaces. Our results suggest that H adsorption at metal-atop sites is determined by all these factors, not only by the d-band center. The strong adsorption of H at the atop sites of 5d metal surfaces can be explained by their lower repulsive contribution.
RESUMEN
The ability to dictate the assembly of quantum dots (QDs) is critical for their integration into solid-state electronic and optoelectronic devices. However, assembly methods that enable efficient electronic communication between QDs, facilitate access to the reactive surface, and retain the native quantum confinement characteristics of the QD are lacking. Here we introduce a universal and facile electrochemical gelation method for assembling metal chalcogenide QDs (as demonstrated for CdS, ZnS, and CdSe) into macroscale 3-D connected pore-matter nanoarchitectures that remain quantum confined and in which each QD is accessible to the ambient. Because of the redox-active nature of the bonding between QD building blocks in the gel network, the electrogelation process is reversible. We further demonstrate the application of this electrogelation method for a one-step fabrication of CdS gel gas sensors, producing devices with exceptional performance for NO2 gas sensing at room temperature, thereby enabling the development of low-cost, sensitive, and reliable devices for air quality monitoring.
Asunto(s)
Compuestos de Cadmio/síntesis química , Técnicas Electroquímicas , Puntos Cuánticos/química , Compuestos de Selenio/síntesis química , Sulfuros/síntesis química , Compuestos de Zinc/síntesis química , Compuestos de Cadmio/química , Geles/síntesis química , Geles/química , Tamaño de la Partícula , Compuestos de Selenio/química , Sulfuros/química , Propiedades de Superficie , Compuestos de Zinc/químicaRESUMEN
BACKGROUND: Farnesoid X receptor (FXR) is a nuclear receptor that plays a critical role in controlling cell apoptosis in diverse diseases. Previous studies have shown that knocking out FXR improved cardiac function by reducing cardiomyocyte apoptosis in myocardial ischemic mice. However, the role of FXR after cerebral ischemia remains unknown. In this study, we explored the effects and mechanisms of FXR knockout (KO) on the functional recovery of mice post cerebral ischemia-reperfusion. METHODS: Adult male C57BL/6 wild type and FXR KO mice were subjected to 90-min transient middle cerebral artery occlusion (tMCAO). The mice were divided into five groups: sham, wild-type tMCAO, FXR KO tMCAO, wild-type tMCAO treated with calcium agonist Bayk8644, and FXR KO tMCAO treated with Bayk8644. FXR expression was examined using immunohistochemistry and Western blot. Brain infarct and brain atrophy volume were examined at 3 and 14 days after stroke respectively. Neurobehavioral tests were conducted up to 14 days after stroke. The protein levels of apoptotic factors (Bcl-2, Bax, and Cleaved caspase-3) and mRNA levels of pro-inflammatory factors (TNF-α, IL-6, IL-1ß, IL-17, and IL-18) were examined using Western blot and RT-PCR. TUNEL staining and calcium imaging were obtained using confocal and two-photon microscopy. RESULTS: The expression of FXR was upregulated after ischemic stroke, which is located in the nucleus of the neurons. FXR KO was found to reduce infarct volume and promote neurobehavioral recovery following tMCAO compared to the vehicle. The expression of apoptotic and pro-inflammatory factors decreased in FXR KO mice compared to the control. The number of NeuN+/TUNEL+ cells declined in the peri-infarct area of FXR KO mice compared to the vehicle. We further demonstrated that inhibition of FXR reduced calcium overload and addition of ionomycin could reverse this neuroprotective effect in vitro. What is more, in vivo results showed that enhancement of intracellular calcium concentrations could aggravate ischemic injury and reverse the neuroprotective effect of FXR KO in mice. CONCLUSIONS: FXR KO can promote neurobehavioral recovery and attenuate ischemic brain injury, inflammatory release, and neuronal apoptosis via reducing calcium influx, suggesting its role as a therapeutic target for stroke treatments.
Asunto(s)
Apoptosis/fisiología , Isquemia Encefálica/patología , Encéfalo/patología , Neuronas/patología , Receptores Citoplasmáticos y Nucleares/metabolismo , Animales , Encéfalo/metabolismo , Isquemia Encefálica/metabolismo , Masculino , Ratones , Ratones Endogámicos C57BL , Ratones Noqueados , Neuronas/metabolismo , Daño por Reperfusión/metabolismo , Daño por Reperfusión/patologíaRESUMEN
We have recently described a new potential use for Langmuir-Blodgett films of surfactants containing redox-inert metal ions in the inhibition of corrosion and have shown good qualitative results for both iron and aluminum surfaces. In this study we proceed to quantify electrochemically the viability of gallium(III)- and zinc(II)-containing metallosurfactants [GaIII(LN2O3)] (1) and [ZnII(LN2O2)H2O] (2) as mitigators for iron corrosion in saline and acidic media. We evaluate their charge transfer suppression and then focus on potentiodynamic polarization and impedance spectroscopy studies, including detailed SEM data to interrogate their metal dissolution/oxygen reduction rate mitigation abilities. Both complexes show some degree of mitigation, with a more pronounced activity in saline than in acidic medium.
RESUMEN
We present the first bubble-nucleation-based electrochemical method for the selective and sensitive detection of surfactants. Our method takes advantage of the high surface activity of surfactant analyte to affect the electrochemical bubble nucleation and then transduces the change in nucleation condition to electrochemical signal for determining the surfactant concentration. Using this method, we demonstrate the quantitation of perfluorinated surfactants in water, a group of emerging environmental contaminants, with a remarkable limit of detection (LOD) down to 30 µg/L and a linear dynamic range of over 3 orders of magnitude. With the addition of a preconcentration step, we have achieved the LOD: 70 ng/L, the health advisory for perfluorooctanesulfonate (PFOS) and perfluorooctanoic acid (PFOA) in drinking water established by the U.S. Environmental Protection Agency. The experimental results are in quantitative agreement with our theoretical model derived from classical nucleation theory. Our method also exhibits an exceptional specificity for the surfactant analytes even in the presence of 1000-fold excess of nonsurfactant interference. This method has the potential to be further developed into a universal electrochemical detector for surfactant analysis because of its simplicity and the surface-activity-based detection mechanism.
Asunto(s)
Técnicas Electroquímicas/métodos , Tensoactivos/análisis , Ácidos Alcanesulfónicos/análisis , Ácidos Alcanesulfónicos/aislamiento & purificación , Caprilatos/análisis , Caprilatos/aislamiento & purificación , Electrodos , Fluorocarburos/análisis , Fluorocarburos/aislamiento & purificación , Agua Dulce/análisis , Límite de Detección , Extracción en Fase Sólida , Tensoactivos/aislamiento & purificaciónRESUMEN
We present a simple and efficient method for preconcentrating per- and polyfluorinated alkyl substances (PFAS) in water. Our method was inspired by the sea-spray aerosol enrichment in nature. Gas bubbles in the ocean serve to scavenge surface active material, carrying it to the air-ocean interface, where the bubbles burst and form a sea-spray aerosol. These aerosol particles are enriched in surface-active organic compounds such as free fatty acids and anionic surfactants. In our method, we in situ generate H2 microbubbles by electrochemical water reduction using a porous Ni foam electrode. These H2 bubbles pick up PFAS as they rise through the water column that contains low concentration PFAS. When these bubbles reach the water surface, they burst and produce aerosol droplets that are enriched in PFAS. Using this method, we demonstrated â¼1000-fold preconcentration for ten common PFAS in the concentration range from 1 pM to 1 nM (or â¼0.5 ng/L to 500 ng/L) in 10 min. We also developed a diffusion-limited adsorption model that is in quantitative agreement with the experimental data. In addition, we demonstrated using this method to preconcentrate PFAS in tap water, indicating its potential use for quantitative analysis of PFAS in real-world water samples.