RESUMEN
OBJECTIVES: To investigate microvascular alterations in the Glisson system of biliary atresia (BA) patients after Kasai portoenterostomy (KP) using three-dimensional (3D) virtual histopathology based on X-ray phase-contrast CT (PCCT). METHODS: Liver explants from BA patients were imaged using PCCT, and 32 subjects were included and divided into two groups: KP (n = 16) and non-KP (n = 16). Combined with histological analysis and 3D visualization technology, 3D virtual histopathological assessment of the biliary, arterial, and portal venous systems was performed. According to loop volume ratio, 3D spatial density, relative surface area, tortuosity, and other parameters, pathological changes of microvasculature in the Glisson system were investigated. RESULTS: In the non-KP group, bile ducts mostly manifested as radial multifurcated hyperplasia and twisted into loops. In the KP group, the bile duct hyperplasia was less, and the loop volume ratio of bile ducts decreased by 13.89%. Simultaneously, the arterial and portal venous systems presented adaptive alterations in response to degrees of bile duct hyperplasia. Compared with the non-KP group, the 3D spatial density of arteries in the KP group decreased by 3.53%, and the relative surface area decreased from 0.088 ± 0.035 to 0.039 ± 0.015 (p < .01). Deformed portal branches gradually recovered after KP, with a 2.93% increase in 3D spatial density and a decrease in tortuosity from 1.17 ± 0.06 to 1.14 ± 0.04 (p < .01) compared to the non-KP group. CONCLUSION: 3D virtual histopathology via PCCT clearly reveals the microvascular structures in the Glisson system of BA patients and provides key insights into the morphological mechanism of microvascular adaptation induced by biliary tract dredging after KP in BA disease. KEY POINTS: ⢠3D virtual histopathology via X-ray phase-contrast computed tomography clearly presented the morphological structures and pathological changes of microvasculature in the Glisson system of biliary atresia patients. ⢠The morphological alterations of microvasculature in the Glisson system followed the competitive occupancy mechanism in the process of biliary atresia.
Asunto(s)
Atresia Biliar , Humanos , Lactante , Atresia Biliar/diagnóstico por imagen , Atresia Biliar/cirugía , Portoenterostomía Hepática/métodos , Hiperplasia , Rayos X , Tomografía Computarizada por Rayos XRESUMEN
PURPOSE: To explore whether the efficacy of fovea-sparing internal limiting membrane peeling (FS-ILMP) is better than that of complete internal limiting membrane peeling (ILMP). METHODS: This retrospective clinical study included 34 cases (34 eyes) with myopic traction maculopathy collected from June 2017 to February 2019. Twenty-three-gauge (23-G) pars plana vitrectomy (23G PPV) was performed on all patients. In the FS-ILMP group, 18 eyes retained the internal limiting membrane (ILM) of about 1 to 1.5 papillary diameter centered on fovea centralis, while in the standard ILMP group, the ILM was completely removed from 16 eyes. The best corrected visual acuity (BCVA), central foveal thickness (CFT), and other indexes were collected before and 6 months after surgery. RESULTS: There was no significant difference in baseline clinical characteristics between the two groups. CFT and BCVA were significantly improved in both FS-ILMP and standard ILMP group, but the postoperative BCVA of the FS-ILMP group was significantly better than that of the standard ILMP group (P < 0.001). Two cases of subretinal effusion in macula were recorded in the FS-ILMP group, and three eyes in the standard ILMP group developed macular holes after surgery. Although both treatments relieved the mechanical traction of macular fovea, the patients in the FS-ILMP group showed better clinical outcomes in various aspects. CONCLUSION: These results improved our understanding of the clinical application of vitrectomy combined with preservation of ILM upon the fovea centralis, which might lay a foundation for in-depth study on the treatment of myopic traction maculopathy.
Asunto(s)
Membrana Epirretinal , Degeneración Macular , Miopía Degenerativa , Membrana Basal/cirugía , Membrana Epirretinal/cirugía , Fóvea Central , Humanos , Miopía Degenerativa/complicaciones , Miopía Degenerativa/diagnóstico , Miopía Degenerativa/cirugía , Estudios Retrospectivos , Tomografía de Coherencia Óptica , Tracción , Agudeza Visual , VitrectomíaRESUMEN
Background Biliary obstruction leads to an increase in biliary pressure within the biliary system, which induces the morphologic adaptation of the biliary tree. Purpose To observe and to quantify the morphologic characteristics of the adaptation in a bile duct ligation rat model and verify it in patients with biliary atresia in a three-dimensional (3D) manner using x-ray phase-contrast CT. Materials and Methods A bile duct ligation model was induced in 40 male Sprague-Dawley rats, which were divided into five groups: the control group (no ligation) and groups 2, 4, 6, and 8 weeks after bile duct ligation (eight animals in each group). Liver tissue samples (approximately 1.8 cm in length and 1.3 cm in height) were imaged by using phase-contrast CT and compared with histologic analysis. With a combination of phase-contrast CT and 3D visualization technology, the entire biliary system and the intrahepatic vascular system were quantitatively analyzed according to downstream, midstream, and upstream domains based on bile duct volume, surface area, and other parameters. Additionally, liver explant tissues from 28 patients with biliary atresia were studied to determine the impact of biliary tract reconstruction. Results To offset the increased biliary pressure within the biliary system, the ductular reaction in the downstream, midstream, and upstream domains manifested as dilatation, spiderweb-like looping, and interconnected honeycomb-like patterns, respectively. The most severe ductular reaction occurred in the upstream domain, and the relative surface area (mean, 0.02 µm-1 ± 0.01, 0.04 µm-1 ± 0.01, 0.07 µm-1 ± 0.02, and 0.10 µm-1 ± 0.02 for the 2-8-week groups, respectively; P < .01 among the groups) and volume fraction of ductules (mean, 16.54% ± 4.62, 19.69% ± 6.41, 26.92% ± 5.82, and 38.34% ± 10.36 for the 2-8-week groups, respectively; P < .01 among the groups except between the 2- and 4-week groups [P = .062]) significantly increased over time. In patients with biliary atresia, it was observed that both fibrosis and proliferative ductules regressed after successful biliary tract reconstruction following Kasai portoenterostomy. Furthermore, ductular reaction was accompanied by a progressive increase in the arterial supply but a loss of portal blood supply. Conclusion X-ray phase-contrast CT with three-dimensional rendering of the biliary system in a bile duct ligation rat model provides key insights into ductular reaction or biliary self-adaptation triggered by increased biliary pressure. © RSNA, 2021 Online supplemental material is available for this article. See also the editorial by Vannier and Wang in this issue.
Asunto(s)
Colestasis/diagnóstico por imagen , Colestasis/patología , Imagenología Tridimensional/métodos , Hígado/diagnóstico por imagen , Hígado/patología , Tomografía Computarizada por Rayos X/métodos , Animales , Sistema Biliar/diagnóstico por imagen , Modelos Animales de Enfermedad , Ligadura , Hígado/irrigación sanguínea , Masculino , Ratas , Ratas Sprague-DawleyRESUMEN
Prediction of pEC50 values of dioxins binding with the aryl hydrocarbon receptor (AhR) is of great significance for exploring how dioxins induce toxicity in human body and evaluating their environmental behaviors and risks. To reveal the factors that influence the toxicity of dioxins, provide more accurate mathematical models for predicting the pEC50 values of dioxins, and supplement the toxicity database of persistent organic pollutants, qualitative structure-activity relationship (SAR) and two-dimensional quantitative structure-activity relationship (2D-QSAR) were used in this study. The research objects in this study were 60 organic compounds with pEC50 values and 162 compounds without pEC50 values, which included polychlorinated dibenzofurans (PCDFs), polychlorinated dibenzo-p-dioxins (PCDDs), and polybrominated dibenzo-p-dioxins (PBDDs). The qualitative structure-activity relationship (SAR) was performed first and concluded that halogen substitutions at any of the 2, 3, 7, and 8 sites increased the pEC50 value of the compound. Moreover, two-dimensional quantitative structure-activity relationship (2D-QSAR) models were established by employing multiple linear regression (MLR) method and artificial neural network (ANN) algorithm to investigate the factors affecting the pEC50 values of dioxins molecules. MLR was used to establish the well-understood linear model and ANN was used to establish a more accurate non-linear model. Both models have good fitting, robustness, and predictive ability. Importantly, the ability of dioxins binding to AhR is mainly determined by molecular descriptors including E1m, SM09_AEA (dm), RDF065u, F05 [Cl-Cl], and Neoplastic-80. In addition, the pEC50 values of the 162 dioxins without toxicity data were predicted by MLR and ANN models, respectively.
Asunto(s)
Dioxinas , Contaminantes Ambientales , Modelos Teóricos , Relación Estructura-Actividad Cuantitativa , Algoritmos , Dioxinas/química , Dioxinas/toxicidad , Contaminantes Ambientales/química , Contaminantes Ambientales/toxicidad , Modelos Lineales , Redes Neurales de la Computación , Unión Proteica , Receptores de Hidrocarburo de Aril/químicaRESUMEN
In recent years, deep neural networks have begun to receive much attention, which has obvious advantages in feature extraction and modeling. However, in the using of deep neural networks for the QSAR modeling process, the selection of various parameters (number of neurons, hidden layers, transfer functions, data set partitioning, number of iterations, etc.) becomes difficult. Thus, we proposed a new and easy method for optimizing the model and selecting Deep Neural Networks (DNN) parameters through uniform design ideas and orthogonal design methods. By using this approach, 222 chloroquine (CQ) derivatives with half maximal inhibitory concentration values reported in different kinds of literature were selected to establish DNN models and a total number of 128,000 DNN models were built to determine the optimized parameters for selecting the better models. Comparing with linear and Artificial Neural Network (ANN) models, we found that DNN models showed better performance.Communicated by Ramaswamy H. Sarma.
Asunto(s)
Cloroquina , Redes Neurales de la Computación , Cloroquina/farmacologíaRESUMEN
AIM: As a specialized intraparenchymal vascular conduit, hepatic sinusoids play a key role in liver microcirculation. This study aimed to explore the three-dimensional (3D) morphological changes of cirrhotic sinusoids by serial histological sections. METHODS: Cirrhosis was induced by tail vein injection of albumin in Wistar rats with a positive antibody. A total of 356 serial histological sections were prepared from liver tissue blocks of normal and cirrhotic rats. The optical microscope images were registered and reconstructed, and 3D reconstructions of the fine structures of fibrous tissues and sinusoids were subsequently visualized. RESULTS: The fibrosis area of the cirrhotic sample was 6-16 times that of the normal sample (P<0.001). Cirrhosis led to obvious changes in the distribution and morphology of sinusoids, which were mainly manifested as dilation, increased quantity and disordered distribution. Compared with normal liver, cirrhotic liver has a significantly increased volume ratio, number and volume of sinusoids (1.63-, 0.53-, and 1.75-fold, respectively, P<0.001). Furthermore, the samples were further divided into three zones according to the oxygen supply, and there were significant differences in the morphology of the sinusoids in the normal and cirrhotic samples (P<0.05). In particular, morphological parameters of the cirrhotic sinusoids near the portal area were obviously greater than those in the normal liver (P<0.05). CONCLUSION: 3D morphological structures of hepatic sinusoids were reconstructed, and the adaptive microstructure changes of cirrhotic sinusoids were accurately measured, which has an important implications for the study of hepatic microcirculation and pathological changes of cirrhosis.
Asunto(s)
Venas Hepáticas , Imagenología Tridimensional/métodos , Cirrosis Hepática/patología , Animales , Venas Hepáticas/anatomía & histología , Venas Hepáticas/patología , Hígado/patología , Cirrosis Hepática Experimental/inducido químicamente , Microcirculación , Ratas , Ratas WistarRESUMEN
The popularity of novel nanoparticles coated capillary column has aroused widespread attention of researchers. Metal organic frameworks (MOFs) with special structure and chemical properties have received great interest in separation sciences. This work presents the investigation of HKUST-1 (Hong Kong University of Science and Technology-1, called Cu3(BTC)2 or MOF-199) nanoparticles as a new type of coating material for capillary electrochromatography. For the first time, three layers coating (3-LC), five layers coating (5-LC), ten layers coating (10-LC), fifteen layers coating (15-LC), twenty layers coating(20-LC) and twenty-five layers coating (25-LC) capillary columns coated with HKUST-1 nanoparticles were synthesized by covalent bond with in situ, layer-by-layer self-assembly approach. The results of scanning electron microscopy (SEM), X-ray diffraction (XRD) and plasma atomic emission spectrometry (ICP-AES) indicated that HKUST-1 was successfully grafted on the inner wall of the capillary. The separating performances of 3-LC, 5-LC, 10-LC, 15-LC, 20-LC and 25-LC open tubular (OT) capillary columns were studied with some neutral small organic molecules. The results indicated that the neutral small organic molecules were separated successfully with 10-LC, 15-LC and 20-LC OT capillary columns because of the size selectivity of lattice aperture and hydrophobicity of organic ligands. In addition, 10-LC and 15-LC OT capillary columns showed better performance for the separation of certain phenolic compounds. Furthermore, 10-LC, 15-LC and 20-LC OT capillary columns exhibited good intra-day repeatability with the relative standard deviations (RSDs; %) of migration time and peak areas lying in the range of 0.3-1.2% and 0.5-4.2%, respectively. For inter-day reproducibility, the RSDs of the three OT capillary columns were found to be lying in the range of 0.3-5.5% and 0.3-4.5% for migration time and peak area, respectively. The RSDs of retention times for column-to-column for three batches of 10-LC, 15-LC and 20-LC OT capillary columns were in the range from 2.3% to 7.2%. Moreover, the fabricated 10-LC, 15-LC and 20-LC OT capillary columns exhibited good repeatability and stability for separation, which could be used successively for more than 120 runs with no observable changes on the separation efficiency.