RESUMEN
Nickel-rich layered oxides are currently considered the most practical candidates for realizing high-energy-density lithium metal batteries (LMBs) because of their relatively high capacities. However, undesired nickel-rich cathode-electrolyte interactions hinder their applicability. Here, we report a satisfactory combination of an antioxidant fluorinated ether solvent and an ionic additive that can form a stable, robust interfacial structure on the nickel-rich cathode in ether-based electrolytes. The fluorinated ether 1,1,2,2-tetrafluoroethyl-1H,1H,5H-octafluoropentyl ether (TFOFE) introduced as a cosolvent into ether-based electrolytes stabilizes the electrolytes against oxidation at the LiNi0.8Mn0.1Co0.1O2 (NCM811) cathode while simultaneously preserving the electrochemical performance of the Li metal anode. Lithium difluoro(bisoxalato)phosphate (LiDFBP) forms a uniform cathode-electrolyte interphase that limits the generation of microcracks inside secondary particles and undesired dissolution of transition metal ions such as nickel, cobalt, and manganese from the cathode into the electrolyte. Using TFOFE and LiDFBP in ether-based electrolytes provides an excellent capacity retention of 94.5% in a Li|NCM811 cell after 100 cycles and enables the delivery of significantly increased capacity at high charge and discharge rates by manipulating the interfaces of both electrodes. This research provides insights into advancing electrolyte technologies to resolve the interfacial instability of nickel-rich cathodes in LMBs.
RESUMEN
Despite the advantage of high capacity, the practical use of the silicon anode is still hindered by large volume expansion during the severe pulverization lithiation process, which results in electrical contact loss and rapid capacity fading. Here, a combined electrochemical and computational study on the factor for accommodating volume expansion of silicon-based anodes is shown. 1D silicon-based nanostructures with different internal spaces to explore the effect of spatial ratio of voids and their distribution degree inside the fibers on structural stability are designed. Notably, lotus-root-type silicon nanowires with locally distributed void spaces can improve capacity retention and structural integrity with minimum silicon pulverization during lithium insertion and extraction. The findings of this study indicate that the distribution of buffer spaces, electrochemical surface area, as well as Li diffusion property significantly influence cycle performance and rate capability of the battery, which can be extended to other silicon-based anodes to overcome large volume expansion.
RESUMEN
The layered nickel-rich materials have attracted extensive attention as a promising cathode candidate for high-energy density lithium-ion batteries (LIBs). However, they have been suffering from inherent structural and electrochemical degradation including severe capacity loss at high electrode loading density (>3.0 g cm-3 ) and high temperature cycling (>60 °C). In this study, an effective and viable way of creating an artificial solid-electrolyte interphase (SEI) layer on the cathode surface by a simple, one-step approach is reported. It is found that the initial artificial SEI compounds on the cathode surface can electrochemically grow along grain boundaries by reacting with the by-products during battery cycling. The developed nickel-rich cathode demonstrates exceptional capacity retention and structural integrity under industrial electrode fabricating conditions with the electrode loading level of ≈12 mg cm-2 and density of ≈3.3 g cm-3 . This finding could be a breakthrough for the LIB technology, providing a rational approach for the development of advanced cathode materials.