Structural Characterization of Lactone-Containing MW 212 Organosulfates Originating from Isoprene Oxidation in Ambient Fine Aerosol.

Isoprene (C5H8) is the main non-methane hydrocarbon emitted into the global atmosphere. Despite intense research, atmospheric transformations of isoprene leading to secondary organic aerosol (SOA) are still not fully understood, including its multiphase chemical reactions. Herein, we report on the detailed structural characterization of atmospherically relevant isoprene-derived organosulfates (OSs) with a molecular weight (MW) of 212 (C5H8SO7), which are abundantly present in both ambient fine aerosol (PM2.5) and laboratory-generated isoprene SOA. The results obtained from smog chamber-generated isoprene SOA and aqueous-phase laboratory experiments coupled to the S(IV)-autooxidation chemistry of isoprene, 3-methyl-2(5H)-furanone, and 4-methyl-2(5H)-furanone, allowed us for the first time to fully elucidate the isomeric structures of the MW 212 OSs. By applying liquid chromatography interfaced to electrospray ionization high-resolution mass spectrometry, we firmly confirmed six positional isomers of the MW 212 OSs in PM2.5 collected from different sites in Europe and the United States. Our results also show that despite the low solubility of isoprene in water, aqueous-phase or multiphase chemistry can play an important role in the formation of OSs from isoprene. Possible formation mechanisms for the MW 212 OSs are also tentatively proposed.

Characterization of polar organosulfates in secondary organic aerosol from the green leaf volatile 3-Z-hexenal.

Evidence is provided that the green leaf volatile 3-Z-hexenal serves as a precursor for biogenic secondary organic aerosol through the formation of polar organosulfates (OSs) with molecular weight (MW) 226. The MW 226 C6-OSs were chemically elucidated, along with structurally similar MW 212 C5-OSs, whose biogenic precursor is likely related to 3-Z-hexenal but still remains unknown. The MW 226 and 212 OSs have a substantial abundance in ambient fine aerosol from K-puszta, Hungary, which is comparable to that of the isoprene-related MW 216 OSs, known to be formed through sulfation of C5-epoxydiols, second-generation gas-phase photooxidation products of isoprene. Using detailed interpretation of negative-ion electrospray ionization mass spectral data, the MW 226 compounds are assigned to isomeric sulfate esters of 3,4-dihydroxyhex-5-enoic acid with the sulfate group located at the C-3 or C-4 position. Two MW 212 compounds present in ambient fine aerosol are attributed to isomeric sulfate esters of 2,3-dihydroxypent-4-enoic acid, of which two are sulfated at C-3 and one is sulfated at C-2. The formation of the MW 226 OSs is tentatively explained through photooxidation of 3-Z-hexenal in the gas phase, resulting in an alkoxy radical, followed by a rearrangement and subsequent sulfation of the epoxy group in the particle phase.

2-hydroxyterpenylic acid: an oxygenated marker compound for α-pinene secondary organic aerosol in ambient fine aerosol.

An oxygenated MW 188 compound is commonly observed in substantial abundance in atmospheric aerosol samples and was proposed in previous studies as an α-pinene-related marker compound that is associated with aging processes. Owing to difficulties in producing this compound in sufficient amounts in laboratory studies and the occurrence of isobaric isomers, a complete assignment for individual MW 188 compounds could not be achieved in these studies. Results from a comprehensive mass spectrometric analysis are presented here to corroborate the proposed structure of the most abundant MW 188 compound as a 2-hydroxyterpenylic acid diastereoisomer with 2R,3R configuration. The application of collision-induced dissociation with liquid chromatography/electrospray ionization-ion trap mass spectrometry in both negative and positive ion modes, as well as chemical derivatization to methyl ester derivatives and analysis by the latter technique and gas chromatography/electron ionization mass spectrometry, enabled a comprehensive characterization of MW 188 isomers, including a detailed study of the fragmentation behavior using both mass spectrometric techniques. Furthermore, a MW 188 positional isomer, 4-hydroxyterpenylic acid, was tentatively identified, which also is of atmospheric relevance as it could be detected in ambient fine aerosol. Quantum chemical calculations were performed to support the diastereoisomeric assignment of the 2-hydroxyterpenylic acid isomers. Results from a time-resolved α-pinene photooxidation experiment show that the 2-hydroxyterpenylic acid 2R,3R diastereoisomer has a time profile distinctly different from that of 3-methyl-1,2,3-butanetricarboxylic acid, a marker for oxygenated (aged) secondary organic aerosol. This study presents a comprehensive chemical data set for a more complete structural characterization of hydroxyterpenylic acids in ambient fine aerosol, which sets the foundation to better understand the atmospheric fate of α-pinene in future studies.

Mass spectrometric characterization of organosulfates related to secondary organic aerosol from isoprene.

RATIONALE: A considerable fraction of atmospheric particulate fine matter consists of organosulfates, with some of the most polar ones originating from the oxidation of isoprene. Their structural characterization provides insights into the nature of gas-phase precursors as well as into formation pathways. METHODS: The structures of unknown polar organosulfates present in ambient particulate fine matter were characterized using liquid chromatography/(-)electrospray ionization mass spectrometry (LC/(-)ESI-MS), including ion trap MS(n) and accurate mass measurements, derivatization of the carbonyl group into 2,4-dinitrophenylhydrazones, detailed interpretation of the MS data, and in a selected case comparison of their LC and MS behavior with that of synthesized reference compounds. RESULTS: Polar organosulfates with molecular weights (MWs) of 156, 170, 184 and 200 were attributed to/or confirmed as derivatives of glycolic acid (156), lactic acid (170), 1,2-dihydroxy-3-butanone (184), glycolic acid glycolate (200), 2-methylglyceric acid (200), and 2,3-dihydroxybutanoic acid (200). In the case of the MW 184 compound an unambiguous assignment was obtained through synthesis of reference compounds. CONCLUSIONS: A more complete structural characterization of polar organosulfates that originate from isoprene secondary organic aerosol was achieved. An important atmospheric finding is the presence of an organosulfate that is related to methyl vinyl ketone, a major gas-phase oxidation product of isoprene. In addition, minor polar organosulfates related to crotonaldehyde were identified.

Molecular composition of boreal forest aerosol from Hyytiälä, Finland, using ultrahigh resolution mass spectrometry.

Organic compounds are important constituents of fine particulate matter (PM) in the troposphere. In this study, we applied direct infusion nanoelectrospray (nanoESI) ultrahigh resolution mass spectrometry (UHR-MS) and liquid chromatography LC/ESI-UHR-MS for the analysis of the organic fraction of PM1 aerosol samples collected over a two week period at a boreal forest site (Hyytiälä), southern Finland. Elemental formulas (460-730 in total) were identified with nanoESI-UHR-MS in the negative ionization mode and attributed to organic compounds with a molecular weight below 400. Kendrick Mass Defect and Van Krevelen approaches were used to identify compound classes and mass distributions of the detected species. The molecular composition of the aerosols strongly varied between samples with different air mass histories. An increased number of nitrogen, sulfur, and highly oxygenated organic compounds was observed during the days associated with continental air masses. However, the samples with Atlantic air mass history were marked by a presence of homologous series of unsaturated and saturated C12-C20 fatty acids suggesting their marine origin. To our knowledge, we show for the first time that the highly detailed chemical composition obtained from UHR-MS analyses can be clearly linked to meteorological parameters and trace gases concentrations that are relevant to atmospheric oxidation processes. The additional LC/ESI-UHR-MS analysis revealed 29 species, which were mainly attributed to oxidation products of biogenic volatile compounds BVOCs (i.e., α,ß-pinene, Δ3-carene, limonene, and isoprene) supporting the results from the direct infusion analysis.

Earth, Wind, Fire, and Pollution: Aerosol Nutrient Sources and Impacts on Ocean Biogeochemistry.

A key Earth system science question is the role of atmospheric deposition in supplying vital nutrients to the phytoplankton that form the base of marine food webs. Industrial and vehicular pollution, wildfires, volcanoes, biogenic debris, and desert dust all carry nutrients within their plumes throughout the globe. In remote ocean ecosystems, aerosol deposition represents an essential new source of nutrients for primary production. The large spatiotemporal variability in aerosols from myriad sources combined with the differential responses of marine biota to changing fluxes makes it crucially important to understand where, when, and how much nutrients from the atmosphere enter marine ecosystems. This review brings together existing literature, experimental evidence of impacts, and new atmospheric nutrient observations that can be compared with atmospheric and ocean biogeochemistry modeling. We evaluate the contribution and spatiotemporal variability of nutrient-bearing aerosols from desert dust, wildfire, volcanic, and anthropogenic sources, including the organic component, deposition fluxes, and oceanic impacts.

Levels and sources of hourly PM2.5-related elements during the control period of the COVID-19 pandemic at a rural site between Beijing and Tianjin.

To control the spread of the novel coronavirus disease 2019 (COVID-19) in China, many anthropogenic activities were reduced and even closed on the national scale. To study the impact of this reduction and closing down, hourly concentrations of PM2.5-related elements were measured at a rural site before (12-25 January 2020), during (26 January-9 February 2020) and after (22 March-2 April 2020) the control period when all people remained socially isolated in their homes and could not return to economic zones for work. Nine major sources were identified by the positive matrix factorization model, including fireworks burning, coal combustion, vehicle emissions, dust, Cr industry, oil combustion, Se industry, Zn smelter, and iron and steel industry. Before the control period, K, Fe, Ca, Zn, Ba and Cu were the main elements, and fireworks burning, Zn smelter and vehicle emissions provided the highest contributions to the total element mass with 55%, 12.1% and 10.3%, respectively. During the control period, K, Fe, Ba, Cu and Zn were the dominating elements, and fireworks burning and vehicle emissions contributed 55% and 27% of the total element mass. After the control period, Fe, K, Ca, Zn and Ba were the main elements, and dust and iron and steel industry were responsible for 56% and 21% of the total element mass. The increased contribution from vehicle emissions during the control period could be attributed to our sampling site being near a town hospital and the fact that the vehicle activities were not restricted. The source apportionment results were also related to air mass backward trajectories. The largest reductions of dust, coal combustion, and the industrial sources (Cr industry, Zn smelter, Se industry, iron and steel industry) were distinctly seen for northwest transport (Ulanqab) and were least significant for northeast transport (Tangshan and Tianjin).

The carbonaceous aerosol levels still remain a challenge in the Beijing-Tianjin-Hebei region of China: Insights from continuous high temporal resolution measurements in multiple cities.

Carbonaceous aerosols in high emission areas attract worldwide attention of the scientific community and the public due to their adverse impacts on the environment, human health and climate. However, long-term continuous hourly measurements are scarce on the regional scale. In this study, a one-year hourly measurement (from December 1, 2016 to November 30, 2017) of organic carbon (OC) and elemental carbon (EC) in airborne fine particles was performed using semi-continuous OC/EC analyzers in Beijing, Tianjin, Shijiazhuang and Tangshan in the Beijing-Tianjin-Hebei (BTH) region in China, which is one of high emission areas in China, even in the world. Marked spatiotemporal variations were observed. The highest concentrations of OC (22.8 ±â€¯30.6 µg/m3) and EC (5.4 ±â€¯6.5 µg/m3) occurred in Shijiangzhuang while the lowest concentrations of OC (11.0 ±â€¯10.7 µg/m3) and EC (3.1 ±â€¯3.6 µg/m3) were obtained in Beijing and Tianjin, respectively. Pronounced monthly, seasonal and diurnal variations of OC and EC were recorded. Compared to published data from the past two decades for the BTH region, our OC and EC levels were lower, implying some effect of recent measures for improving the air quality. Significant correlations of OC versus EC (p < 0.001) were found throughout the study period with high slopes and correlation coefficients in winter, but low slopes and correlation coefficients in summer. The estimated secondary OC (SOC), based on the minimum R squared (MRS) method, represented 29%, 47%, 38% and 48% of the OC for Beijing, Tianjin, Shijiazhuang and Tangshan, respectively. These percentages are larger than previous ones obtained for the BTH region in the past decade. There were obvious differences in the potential source regions of OC and EC among the four cities. Obvious prominent potential source areas of OC and EC were observed for Beijing, which were mainly located in the central and western areas of Inner Mongolia and even extended to the Mongolian regions, which is different from the findings in previous studies. For all sites, adjacent areas of the main provinces in northern China were found to be important potential source areas.

Characterization of organosulfates from the photooxidation of isoprene and unsaturated fatty acids in ambient aerosol using liquid chromatography/(-) electrospray ionization mass spectrometry.

In the present study, we have characterized in detail the MS(2) and MS(3) fragmentation behaviors, using electrospray ionization (ESI) in the negative ion mode, of previously identified sulfated isoprene secondary organic aerosol compounds, including 2-methyltetrols, 2-methylglyceric acid, 2-methyltetrol mononitrate derivatives, glyoxal and methylglyoxal. A major fragmentation pathway for the deprotonated molecules of the sulfate esters of 2-methyltetrols and 2-methylglyceric acid and of the sulfate derivatives of glyoxal and methylglyoxal is the formation of the bisulfate [HSO(4)](-) anion, while the deprotonated sulfate esters of 2-methyltetrol mononitrate derivatives preferentially fragment through loss of nitric acid. Rational interpretation of MS(2), MS(3) and accurate mass data led to the structural characterization of unknown polar compounds in K-puszta fine aerosol as organosulfate derivatives of photooxidation products of unsaturated fatty acids, i.e. 2-hydroxy-1,4-butanedialdehyde, 4,5- and 2,3-dihydroxypentanoic acids, and 2-hydroxyglutaric acid, and of alpha-pinene, i.e. 3-hydroxyglutaric acid. The deprotonated molecules of the sulfated hydroxyacids, 2-methylglyceric acid, 4,5- and 2,3-dihydroxypentanoic acid, and 2- and 3-hydroxyglutaric acids, showed in addition to the [HSO(4)](-) ion (m/z 97) neutral losses of water, CO(2) and/or SO(3), features that are characteristic of humic-like substances. The polar organosulfates characterized in the present work are of climatic relevance because they may contribute to the hydrophilic properties of fine ambient aerosol. In addition, these compounds probably serve as ambient tracer compounds for the occurrence of secondary organic aerosol formation under acidic conditions.

Organosulfate formation in biogenic secondary organic aerosol.

Organosulfates of isoprene, alpha-pinene, and beta-pinene have recently been identified in both laboratory-generated and ambient secondary organic aerosol (SOA). In this study, the mechanism and ubiquity of organosulfate formation in biogenic SOA is investigated by a comprehensive series of laboratory photooxidation (i.e., OH-initiated oxidation) and nighttime oxidation (i.e., NO3-initiated oxidation under dark conditions) experiments using nine monoterpenes (alpha-pinene, beta-pinene, d-limonene, l-limonene, alpha-terpinene, gamma-terpinene, terpinolene, Delta(3)-carene, and beta-phellandrene) and three monoterpenes (alpha-pinene, d-limonene, and l-limonene), respectively. Organosulfates were characterized using liquid chromatographic techniques coupled to electrospray ionization combined with both linear ion trap and high-resolution time-of-flight mass spectrometry. Organosulfates are formed only when monoterpenes are oxidized in the presence of acidified sulfate seed aerosol, a result consistent with prior work. Archived laboratory-generated isoprene SOA and ambient filter samples collected from the southeastern U.S. were reexamined for organosulfates. By comparing the tandem mass spectrometric and accurate mass measurements collected for both the laboratory-generated and ambient aerosol, previously uncharacterized ambient organic aerosol components are found to be organosulfates of isoprene, alpha-pinene, beta-pinene, and limonene-like monoterpenes (e.g., myrcene), demonstrating the ubiquity of organosulfate formation in ambient SOA. Several of the organosulfates of isoprene and of the monoterpenes characterized in this study are ambient tracer compounds for the occurrence of biogenic SOA formation under acidic conditions. Furthermore, the nighttime oxidation experiments conducted under highly acidic conditions reveal a viable mechanism for the formation of previously identified nitrooxy organosulfates found in ambient nighttime aerosol samples. We estimate that the organosulfate contribution to the total organic mass fraction of ambient aerosol collected from K-puszta, Hungary, a field site with a similar organosulfate composition as that found in the present study for the southeastern U.S., can be as high as 30%.

Characterization and source identification of fine particulate matter in urban Beijing during the 2015 Spring Festival.

The Spring Festival (SF) is the most important holiday in China for family reunion and tourism. During the 2015 SF an intensive observation campaign of air quality was conducted to study the impact of the anthropogenic activities and the dynamic characteristics of the sources. During the study period, pollution episodes frequently occurred with 12days exceeding the Chinese Ambient Air Quality Standards for 24-h average PM2.5 (75µg/m3), even 8days with exceeding 150µg/m3. The daily maximum PM2.5 concentration reached 350µg/m3 while the hourly minimum visibility was <0.8km. Three pollution episodes were selected for detailed analysis including chemical characterization and diurnal variation of the PM2.5 and its chemical composition, and sources were identified using the Positive Matrix Factorization model. The first episode occurring before the SF was characterized by more formation of SO42- and NO3- and high crustal enrichment factors for Ag, As, Cd, Cu, Hg, Pb, Se and Zn and seven categories of pollution sources were identified, whereby vehicle emission contributed 38% to the PM2.5. The second episode occurring during the SF was affected heavily by large-scale firework emissions, which led to a significant increase in SO42-, Cl-, OC, K and Ba; these emissions were the largest contributor to the PM2.5 accounting for 36%. During the third episode occurring after the SF, SO42-, NO3-, NH4+ and OC were the major constituents of the PM2.5 and the secondary source was the dominant source with a contribution of 46%. The results provide a detailed understanding on the variation in occurrence, chemical composition and sources of the PM2.5 as well as of the gaseous pollutants affected by the change in anthropogenic activities in Beijing throughout the SF. They highlight the need for limiting the firework emissions during China's most important traditional festival.

Changes in elemental composition and mass of atmospheric aerosol pollution between 1996 and 2002 in a Central European city.

Median atmospheric concentrations of Pb, Br, S, As, Se, and particulate matter (PM) decreased, and median concentrations of Sb, Cu, Zn, Fe, Ca, Cr and Ba increased in urban aerosol in downtown Budapest between 1996 and 2002. The changes in Pb and Br concentrations were unambiguously attributed to the phasing out of leaded gasoline. The increments were mainly related to and explained by non-exhaust vehicular emissions. The mechanical wear of asbestos-free brake linings of road vehicles contributed to the concentration of Cu and Sb on average by 69% and 66%, respectively in the PM10 size fraction. Tire rubber abrasion was a major source for atmospheric Zn; on average, non-crustal sources accounted for 67% of Zn in the PM10 size fraction. Contribution of the tire wear component to the PM10 mass was estimated to be 6% at most, while its contribution to organic aerosol was of the order of 15%.

Sources of the PM10 aerosol in Flanders, Belgium, and re-assessment of the contribution from wood burning.

From 30 June 2011 to 2 July 2012 PM10 aerosol samples were simultaneously taken every 4th day at four urban background sites in Flanders, Belgium. The sites were in Antwerpen, Gent, Brugge, and Oostende. The PM10 mass concentration was determined by weighing; organic and elemental carbon (OC and EC) were measured by thermal-optical analysis, the wood burning tracers levoglucosan, mannosan and galactosan were determined by gas chromatography/mass spectrometry, 8 water-soluble ions were measured by ion chromatography, and 15 elements were determined by a combination of inductively coupled plasma atomic emission spectrometry and mass spectrometry. The multi-species dataset was subjected to receptor modeling by PMF. The 10 retained factors (with their overall average percentage contributions to the experimental PM10 mass) were wood burning (9.5%), secondary nitrate (24%), secondary sulfate (12.6%), sea salt (10.0%), aged sea salt (19.2%), crustal matter (9.7%), non-ferrous metals (1.81%), traffic (10.3%), non-exhaust traffic (0.52%), and heavy oil burning (3.0%). The average contributions of wood smoke for the four sites were quite substantial in winter and ranged from 12.5 to 20% for the PM10 mass and from 47 to 64% for PM10 OC. Wood burning appeared to be also a notable source of As, Cd, and Pb. The contribution from wood burning to the PM10 mass and OC was also assessed by making use of levoglucosan as single marker compound and the conversion factors of Schmidl et al. (2008), as done in our previous study on wood burning in Flanders (Maenhaut et al., 2012). However, the apportionments were much lower than those deduced from PMF. It seems that the conversion factors of Schmidl et al. (2008) may not be applicable to wood burning in Flanders. From scatter plots of the PMF-derived wood smoke OC and PM versus levoglucosan, we arrived at conversion factors of 9.7 and 22.6, respectively.

Stable isotopes measurements reveal dual carbon pools contributing to organic matter enrichment in marine aerosol.

Stable carbon isotope ratios in marine aerosol collected over the Southern Indian Ocean revealed δ13C values ranging from -20.0‰ to -28.2‰. The isotope ratios exhibited a strong correlation with the fractional organic matter (OM) enrichment in sea spray aerosol. The base-level isotope ratio of -20.0‰ is characteristic of an aged Dissolved Organic Matter (DOM) pool contributing a relatively homogeneous background level of DOM to oceanic waters. The range of isotope ratios, extending down to -28.2‰, is characteristic of more variable, stronger, and fresher Particulate Organic Matter (POM) pool driven by trophic level interactions. We present a conceptual dual-pool POM-DOM model which comprises a 'young' and variable POM pool which dominates enrichment in sea-spray and an 'aged' but invariant DOM pool which is, ultimately, an aged end-product of processed 'fresh' POM. This model is harmonious with the preferential enrichment of fresh colloidal and nano-gel lipid-like particulate matter in sea spray particles and the observed depleted δ13C ratio resulting from isotope equilibrium fractionation coupled with enhanced plankton photosynthesis in cold water (-2 °C to +8 °C). These results re-assert the hypothesis that OM enrichment in sea-spray is directly linked to primary production and, consequently, can have implications for climate-aerosol-cloud feedback systems.

Enhanced Volatile Organic Compounds emissions and organic aerosol mass increase the oligomer content of atmospheric aerosols.

Secondary organic aerosol (SOA) accounts for a dominant fraction of the submicron atmospheric particle mass, but knowledge of the formation, composition and climate effects of SOA is incomplete and limits our understanding of overall aerosol effects in the atmosphere. Organic oligomers were discovered as dominant components in SOA over a decade ago in laboratory experiments and have since been proposed to play a dominant role in many aerosol processes. However, it remains unclear whether oligomers are relevant under ambient atmospheric conditions because they are often not clearly observed in field samples. Here we resolve this long-standing discrepancy by showing that elevated SOA mass is one of the key drivers of oligomer formation in the ambient atmosphere and laboratory experiments. We show for the first time that a specific organic compound class in aerosols, oligomers, is strongly correlated with cloud condensation nuclei (CCN) activities of SOA particles. These findings might have important implications for future climate scenarios where increased temperatures cause higher biogenic volatile organic compound (VOC) emissions, which in turn lead to higher SOA mass formation and significant changes in SOA composition. Such processes would need to be considered in climate models for a realistic representation of future aerosol-climate-biosphere feedbacks.

Development of a gas chromatographic/ion trap mass spectrometric method for the determination of levoglucosan and saccharidic compounds in atmospheric aerosols. Application to urban aerosols.

We developed and validated a gas chromatographic/ion trap mass spectrometric method for the determination of levoglucosan and the related monosaccharide anhydrides, mannosan, galactosan and 1,6-anhydro-beta-D-glucofuranose in urban atmospheric aerosols collected on quartz fiber filters. The method is based on extraction with dichloromethane-methanol (80 : 20, v/v), trimethylsilylation, multiple reaction monitoring in the tandem mass spectrometric mode using the ion at m/z 217, and the use of an internal standard calibration procedure with the structurally related compound methyl beta-L-arabinopyranoside. In addition, the method allows the quantification of other saccharidic compounds, arabitol, mannitol, glucose, fructose, inositol and sucrose, which were found to be important in summer aerosols. The recovery of levoglucosan was estimated by spiking blank filters and was better than 90%. The precision evaluated by analyzing parts of the same filters was about 2% for the monosaccharide anhydrides and 7% for the other saccharidic compounds in the case of a winter aerosol sample, and the corresponding values for a summer aerosol sample were 5% and 8%. The method was applied to urban PM(10) (particulate matter of <10 microm aerodynamic diameter) aerosols collected at Ghent, Belgium, during a 2000-2001 winter and a 2001 summer episode and revealed interesting seasonal variations. While monosaccharide anhydrides were relatively more important during the winter season owing to wood burning, the other saccharidic compounds were more prevalent during the summer season, with some of them, if not all, originating from the vegetation.

Formation of secondary organic aerosol marker compounds from the photooxidation of isoprene and isoprene-derived alkene diols under low-NO(x) conditions.

In the present work, we have evaluated whether isomeric C5-alkene diols (1,2-dihydroxy-2-methyl-3-butene, 1,2-dihydroxy-3-methyl-3-butene, and 1,4-dihydroxy-2-methyl-2-butene (cis + trans)), which have first been detected upon photooxidation of isoprene in the absence of NO and are known to be formed in the ambient atmosphere, can serve as precursors for the 2-methyltetrols, C5-alkene triols, and 2-methylglyceric acid under low-NO(x) conditions. The C5-alkene diols were prepared following published synthesis procedures. It is shown that under the applied chamber conditions the isomeric C5-alkene diols give rise to 2-methyltetrols with different threo/erythro abundance ratios and that certain diols produce 2-methylglyceric acid, but that they do not form C5-alkene triols. Furthermore, it is shown that the photooxidation of isoprene under the applied chamber conditions employing photolysis of H2O2 under dry conditions yields relatively small amounts of C5-alkene triols compared to those of the 2-methyltetrols, unlike under ambient conditions. It is argued that the chamber conditions are not optimal for the formation of C5-epoxydiols, which serve as gas-phase precursors for the C5-alkene triols, and likely as in some previous studies favor the formation of C5-alkene diols as a result of RO2 + RO2 reactions.

Liquid chromatography tandem mass spectrometry method for characterization of monoaromatic nitro-compounds in atmospheric particulate matter.

Nitrogen-containing organic compounds in the atmosphere have drawn attention owing to their impact on aerosol chemistry and physics and their potential adverse effects on the biosphere. Among them, nitrocatechols and their homologs have recently been associated with biomass burning. In the present study, nitrocatechols, nitrophenols, nitroguaiacols and nitrosalicylic acids (NSAs) were simultaneously quantified for the first time by using a new analytical method based on liquid chromatography/tandem mass spectrometry, which was systematically optimized and validated. Several analyte specific issues regarding the sample preparation and chromatographic analysis were addressed in order to ensure method sensitivity, precision, and accuracy. Sample matrix effects were thoroughly investigated in order to ensure method specificity. The method was found to be sensitive with limits of detection ranging from 0.1 to 1.0 µg L(-1), and with accuracy generally between 90 and 104%. The relative standard deviations for repeatability and intermediate precision were better than 4% and 9%, respectively. The method was applied to the analysis of winter and summer PM(10) samples from the city of Ljubljana, Slovenia. Aerosol concentrations as high as 152 and 134 ng m(-3) were obtained for the major aerosol nitro-aromatics: 4-nitrocatechol (4NC) and methyl-nitrocatechols (MNCs), respectively. Up to 500-times higher concentrations of 4NC and MNCs were found in winter compared to summer aerosols. The correlation analysis for winter samples showed that 4NC, MNCs, and NSAs are strongly inter-correlated (R(2)=0.84-0.96). Significant correlations between these analytes and anhydrosugars support their proposed origin from biomass burning. The studied nitro-aromatics were found to constitute a non-negligible fraction (around 1%) of the organic carbon.