Microsclerotial pellets of Metarhizium spp.: thermotolerance and bioefficacy against the cattle tick.

The cattle tick, Rhipicephalus microplus (Acari: Ixodidae), is a multi-billion dollar ectoparasite of global importance affecting beef and milk production. Submerged cultures of cosmopolitan entomopathogenic fungal species of the genus Metarhizium typically produce microsclerotia that provide both long-term survival and environmental resistance. Microsclerotia hold great potential as an unconventional active propagule to control this tick under laboratory and semi-field conditions. However, heat stress caused especially by elevated temperatures poses a critical environmental constraint for the successful development and efficacy of microsclerotia under tropical conditions. First, we screened six strains of Metarhizium anisopliae, Metarhizium robertsii and Metarhizium humberi for their ability to produce microsclerotia by submerged liquid cultivation. In addition, we assessed the biological fitness and bioefficacy of dried microsclerotial pellets under amenable (27 °C) and heat-stressed (32 °C) incubation against engorged adult females of R. microplus. Microsclerotia in pelletized formulation prepared with carriers based on diatomaceous earth and microcrystalline cellulose exhibited conidial production at different extents according to the fungal strain and the incubation temperature, but most strains displayed reduced sporogenesis when exposed to 32 °C. Engorged tick females exposed to sporulated microsclerotia from pelletized M. anisopliae CG47 or IP 119 had fewer number of hatching larvae in comparison to the control group, irrespective of the incubation temperature tested. The minimum dosage of microsclerotial pellets that effectively reduced hatchability of tick larvae was estimated to be 2 mg per plate (equivalent to 6.0 kg per hectare). Metarhizium microsclerotial pellets exhibited significant tolerance to 32 °C and pronounced acaricidal activity against this economically important ectoparasite of cattle, even under simulated environmental heat stress. KEY POINTS: • Heat stress affects conidial production by microsclerotia of most pelletized Metarhizium strains • Heat stress does not impair the acaricidal performance of pelletized microsclerotia • Pellet formulation of Metarhizium microsclerotia is a promising mycoacaricide.

Development of Lipid Polymer Hybrid Drug Delivery Systems Prepared by Hot-Melt Extrusion.

This study sought to develop polymer-lipid hybrid solid dispersions containing the poorly soluble drug lopinavir (LPV) by hot-melt extrusion (HME). Hence, the lipid and polymeric adjuvants were selected based on miscibility and compatibility studies. Film casting was used to assess the miscibility, whereas thermal, spectroscopic, and chromatographic analyses were employed to evaluate drug-excipient compatibility. Extrudates were obtained and characterized by physicochemical tests, including in vitro LPV dissolution. Preformulation studies led to select the most appropriate materials, i.e., the polymers PVPVA and Soluplus®, the plasticizers polyethylene glycol 400 and Kolliphor® HS15, phosphatidylcholine, and sodium taurodeoxycholate. HME processing did not result in LPV degradation and significantly increased entrapment efficiency (93.8% ± 2.8 for Soluplus® extrudate against 19.8% ± 0.5 of the respective physical mixture). LPV dissolution was also increased from the extrudates compared to the corresponding physical mixtures (p < 0.05). The dissolution improvement was considerably greater for the Soluplus®-based formulation (24.3 and 2.8-fold higher than pure LPV and PVPVA-based extrudate after 120 min, respectively), which can be attributed to the more pronounced effects of HME processing on the average size and LPV solid-state properties in the Soluplus® extrudates. Transmission electron microscopy and chemical microanalysis suggested that the polymer-lipid interactions in Soluplus®-based formulation depended on thermal processing.

Enhanced Skin Permeation of Punicalagin after Topical Application of Pluronic Micelles or Vesicles Loaded with Lafoensia pacari Extract.

Punicalagin, the principal ellagitannin of Lafoensia pacari leaves, has proven antioxidant activity, and standardized extracts of L. pacari can be topically used for skin aging management. We hypothesized that Pluronic nanomicelles or vesicles could solubilize sufficiently large amounts of the standardized extracts of L. pacari and provide chemical stability to punicalagin. The standardized extracts of L. pacari were obtained with an optimized extraction procedure, and the antioxidant activity was characterized. Formulations containing Pluronic at 25% and 35% were obtained with or without Span 80. They were characterized by average diameter, polydispersity index, punicalagin content, physicochemical stability, and rheology. A release and skin permeation study was carried out in vertical diffusion cells. The extraction procedure allowed quantifying high punicalagin content (i.e., 141.61 ± 3.87 mg/g). The standardized extracts of L. pacari showed antioxidant activity for all evaluated methods. Pluronic at 25 and Pluronic at 35 with standardized extracts of L. pacari showed an average diameter of about 25 nm. The addition of Span 80 significantly increased the mean diameter by 15-fold (p < 0.05), indicating the spontaneous formation of vesicles. Pluronic formulations significantly protected punicalagin from chemical degradation (p < 0.05). Pluronic at 25 formulations presented as free-flowing liquid-like systems, while Pluronic at 35 resulted in an increase of about 44-fold in |ƞ*|. The addition of Span 80 significantly reduced the Pluronic sol-gel transition temperature (p < 0.05), indicating the formation of vesicles. Formulations with Span 80 significantly enhanced punicalagin skin permeation compared to formulations without Span 80 (p < 0.05). Formulations with Span 80 were demonstrated to be the most promising formulations, as they allowed significant permeation of punicalagin (about 80 to 315 µg/cm2), which has been shown to have antioxidant activity.

Relative humidity impacts development and activity against Aedes aegypti adults by granular formulations of Metarhizium humberi microsclerotia.

The impact of ambient relative humidity (RH) on conidial production of Metarhizium humberi IP 46 microsclerotia (MS) formulated in pellets or granules was investigated, and a promising granular formulation was tested against Aedes aegypti adults to confirm its efficacy. Microcrystalline cellulose (MC) and diatomaceous earth (DE) or a combination of vermiculite (VE), DE and silicon dioxide (SD) were tested as carriers in granular formulations containing MS. A range of 93-96.5% RH was critical for fungal development, and at least 96.5-98.5% RH was required for high conidial production on pellets or granules. Conidial production was clearly higher on pellets and granules prepared with VE than MC as the main carrier. VE granules containing MS were highly active against A. aegypti adults. Most mosquitoes were killed within 6 days after treatment regardless of the exposure time of adults to the formulation (1 min-24 h) or ambient humidity (75 or >98%). Production of conidia on dead adults varied between 7.3 × 106 and 2.2 × 107 conidia/individual, when exposed to MS granules for 12 h and 1 min, respectively. Granular formulations containing VE as the main carrier and MS as the active ingredient of M. humberi have strong potential for use against A. aegypti. KEY POINTS: • High conidial production on granular microsclerotial formulations at >96.5% RH • Vermiculite is more appropriate as a carrier than microcrystalline cellulose • Granules with IP 46 microsclerotia are highly active against Aedes aegypti adults.

Inorganic pellets containing microsclerotia of Metarhizium anisopliae: a new technological platform for the biological control of the cattle tick Rhipicephalus microplus.

This study was sought to devise pellets containing inorganic materials and microsclerotia of Metarhizium anisopliae strain IP 119 for biological control of Rhipicephalus microplus, the most economically important tick in Brazilian cattle industry. In addition, we evaluated the storage stability of the pellets, their tolerance to ultraviolet radiation (UV-B), and efficacy against ticks under laboratory conditions. Fungal microsclerotia were produced by liquid culture fermentation and mixed with pre-selected inorganic matrices: vermiculite powder, diatomaceous earth, and colloidal silicon dioxide (78:20:2, w/w/w). The microsclerotial pellets were then prepared by a two-stage process involving extrusion and spheronization. Pellet size averaged 525.53 ± 7.74 µm, with a sphericity index of 0.72 ± 0.01, while biomass constituents did not affect the wet mass properties. Conidial production from microsclerotial pellets upon rehydration ranged from 1.85 × 109 to 1.97 × 109 conidia g-1 with conidial viability ≥ 93%. Conidial production from pellets stored at 4 °C was invariable for up to 21 days. Unformulated microsclerotia and microsclerotial pellets were extremely tolerant to UV-B compared with aerial conidia. Engorged tick females exposed to conidia from sporulated pellets applied to soil samples and upon optimal rehydration exhibited shorter oviposition time length, shorter life span, and reduced number of hatched larvae. In summary, microsclerotial pellets of M. anisopliae IP 119 effectively suppressed R. microplus and showed outstanding UV-B tolerance in laboratory tests. Prospectively, this formulation prototype is promising for targeting the non-parasitic stage of this tick on outdoor pasture fields and may offer a novel mycoacaricide for its sustainable management. KEY POINTS: • Pellets with microsclerotia and inorganic materials are innovative for tick control. • Metarhizium microsclerotia show superior UV-B tolerance in relation to conidia. • Pellets of Metarhizium microsclerotia produce infective conidia against ticks.

Development of carvedilol-loaded lipid nanoparticles with compatible lipids and enhanced skin permeation in different skin models.

The study aimed to develop lipid nanoparticles using excipients compatible with carvedilol (CARV) for enhanced transdermal drug delivery. Nanostructured lipid carriers (NLC) were successfully obtained and fully characterised. Franz diffusion cells were used for release and in vitro permeation studies in the porcine epidermis (EP) and full-thickness rat skin. NLC4 and NLC5 (0.5 mg/mL of CARV) presented small size (80.58 ± 1.70 and 116.80 ± 12.23 nm, respectively) and entrapment efficiency of 98.14 ± 0.79 and 98.27 ± 0.99%, respectively. CARV-loaded NLC4 and NLC5 controlled drug release. NLC4 allowed CAR permeation through porcine EP in greater amounts than NLC5, i.e. 11.83 ± 4.71 µg/cm2 compared to 3.06 ± 0.79 µg/cm2. NLC4 increased CARV permeation by 2.5-fold compared to the unloaded drug in rat skin studies (13.73 ± 4.12 versus 5.31 ± 1.56 µg/cm2). NLC4 seems to be a promising carrier for the transdermal delivery of CARV.

In Silico Study, Physicochemical, and In Vitro Lipase Inhibitory Activity of α,ß-Amyrenone Inclusion Complexes with Cyclodextrins.

α,ß-amyrenone (ABAME) is a triterpene derivative with many biological activities; however, its potential pharmacological use is hindered by its low solubility in water. In this context, the present work aimed to develop inclusion complexes (ICs) of ABAME with γ- and ß-cyclodextrins (CD), which were systematically characterized through molecular modeling studies as well as FTIR, XRD, DSC, TGA, and SEM analyses. In vitro analyses of lipase activity were performed to evaluate possible anti-obesity properties. Molecular modeling studies indicated that the CD:ABAME ICs prepared at a 2:1 molar ratio would be more stable to the complexation process than those prepared at a 1:1 molar ratio. The physicochemical characterization showed strong evidence that corroborates with the in silico results, and the formation of ICs with CD was capable of inducing changes in ABAME physicochemical properties. ICs was shown to be a stronger inhibitor of lipase activity than Orlistat and to potentiate the inhibitory effects of ABAME on porcine pancreatic enzymes. In conclusion, a new pharmaceutical preparation with potentially improved physicochemical characteristics and inhibitory activity toward lipases was developed in this study, which could prove to be a promising ingredient for future formulations.

Effects of Formulation and Manufacturing Process on Drug Release from Solid Self-emulsifying Drug Delivery Systems Prepared by High Shear Mixing.

This study sought to investigate the influence of formulation and process factors of the high shear mixing (HSM) on the properties of solid self-emulsifying drug delivery systems (S-SEDDS) containing the model drug carvedilol (CAR). Firstly, liquid SEDDS (L-SEDDS) were prepared by mixing castor oil with different proportions of surfactant (Solutol or Kolliphor RH40) and cosolvent (Transcutol or PEG400). A miscible L-SEDDS with high drug solubility (124.3 mg/g) was selected and gave rise to 10% (m/m) CAR loaded-emulsion with reduced particle size. Then, a factorial experimental design involving five component's concentration and two process factors was used to study the solidification of the selected L-SEDDS by HSM. CAR content, diffractometric profile, and in vitro dissolution were determined. Morphological and flow analyses were also performed. Porous and spherical particles with mean sizes ranging from 160 to 210 µm were obtained. Particle size was not affected by any formulation factor studied. Powder flowability, in turn, was influenced by L-SEDDS and crospovidone concentration. CAR in vitro dissolution from S-SEDDS was significantly increased compared to the drug as supplied and was equal (pH 1.2) or lower (pH 6.8) than that determined for L-SEDDS. Colloidal silicon dioxide decreased drug dissolution, whereas an increase in water-soluble diluent lactose and L-SEDDS concentration increased CAR dissolution. The proper selection of liquid and solid constituents proved to be crucial to developing an S-SEDDS by HSM. Indeed, the results obtained here using experimental design contribute to the production of S-SEDDS using an industrially viable process.

Preformulation Studies to Guide the Production of Medicines by Fused Deposition Modeling 3D Printing.

Fused deposition modeling (FDM) 3D printing has demonstrated high potential for the production of personalized medicines. However, the heating at high temperatures inherent to this process causes unknown risks to the drug product's stability. The present study aimed to assess the use of a tailored preformulation protocol involving physicochemical assessments, including the rheological profiles of the samples, to guide the development of medicines by FDM 3D printing. For this, polymers commonly used in FDM printing, i.e., high impact polystyrene (HIPS), polylactic acid (PLA), and polyvinyl alcohol (PVA), and their common plasticizers (mineral oil, triethyl citrate, and glycerol, respectively) were evaluated using the thermolabile model drug isoniazid (INH). Samples were analyzed by chemical and physical assays. The results showed that although the drug could produce polymorphs under thermal processing, the polymeric matrix can be a protective element, and no polymorphic transformation was observed. However, incompatibilities between materials might impact their chemical, thermal, and rheological performances. In fact, ternary mixtures of INH, PLA, and TEC showed a major alteration in their viscoelastic behavior besides the chemical changes. On the other hand, the use of plasticizers for HIPS and PVA exhibited positive consequences in drug solubility and rheologic behavior, probably improving sample printability. Thus, the optimization of the FDM 3D printing based on preformulation studies can assist the choice of compatible components and seek suitable processing conditions to obtain pharmaceutical products.

Mucoadhesive formulation containing Curcuma longa L. reduces oral mucositis induced by 5-fluorouracil in hamsters.

We explored the effects of a mucoadhesive formulation containing curcuminoid (MFC) from Curcuma longa L. extract on oral mucositis (OM) induced by 5-fluorouracil (5-FU) in hamsters. Seventy-two golden Syrian hamsters were randomly allocated into four groups: control, placebo, chamomilla, and MFC. Animals received an intraperitoneal injection of 5-FU at Days 0 and 2. On Days 3 and 4, the buccal mucosa was scratched. Therapy was initiated on Day 5. Animals received two applications of the substances per day according to the experimental group. Six animals were euthanized on Days 8, 10, and 14. Clinical analysis were performed using photography and histopathological sections of 3 µm were stained by hematoxylin-eosin for semiquantitative analysis of re-epithelization and inflammation. Immunohistochemistry was used for angiogenesis (CD31) and transforming growth factor beta 1 (TGF-ß1) analysis. On Day 5, all groups exhibited OM. Clinical and histopathological findings revealed that on Day 8, both MFC and chamomilla groups exhibited better wound healing. In addition, the MFC group demonstrated lower angiogenesis and TGF-ß1 levels on Day 8 compared with placebo and control groups. Collectively, these findings suggest that MFC has a therapeutic effect on OM, accelerating wound healing through re-epithelization and anti-inflammatory action as modulation of angiogenesis and TGF-ß1 expression.

Microencapsulation of fish oil by casein-pectin complexes and gum arabic microparticles: oxidative stabilisation.

This study was aimed to microencapsulate fish oil (FO) in two biocompatible polymeric blends: gum arabic (GA)-maltodextrin (MD) and casein-pectin (CP)-MD. GA-MD microparticles and CP-MD microparticles were produced by spray-drying and complex coacervation and spray-drying, respectively. Encapsulation efficiency, particle size, moisture content, oxidative stability, and morphological properties were analysed. Encapsulation efficiencies of 51.2-56.8% (w/v) for GA and 64.7-67.9% (w/v) for CP preparations were found. GA particle sizes varied from 2 to 100 µm and from 2 to 120 µm for CP microparticles. Spherical forms with depressions in the topography of both systems were evidenced by scanning electron microscopy. Confocal microscopy evidenced surface oil on GA microparticles, corroborating encapsulation efficiency. CP was more efficient than GA to reduce oxidation, with maximum peroxide values (PVs) of 17.40 mmol/kg oil after 28 d at 40 °C/75% relative humidity (RH). Thus, CP is a promising biopolymeric blend for encapsulation of FO that provides protection against lipid oxidation.

The Effects of Fillers and Binders on the Accuracy of Tablet Subdivision.

The effects of excipients on the accuracy of tablet subdivision are severely underinvestigated. In this study, placebo tablets were prepared using a combined mixture design of fillers and binders to evaluate the effect of these excipients on subdivision accuracy. The responses assessed were mass loss, mass variation, tablet fragmentation, and increased friability. Dicalcium phosphate dihydrate (DCP) gave rise to more uniform and denser tablets than microcrystalline cellulose (MCC), thus resulting in greater subdivision accuracy. The binder type, hydroxypropylcellulose (HPC) or polyvinylpyrrolidone (PVP), did not affect the subdivision of DCP tablets. On the contrary, the structural similarity between HPC and MCC led to improved subdivision accuracy for MCC tablets. A less accurate subdivision was observed in tablets prepared with a DCP-MCC combination; this finding could be attributed to irregular binder distribution in this matrix. An optimized response was built using desirability analysis. This study helps to illuminate the relationship between fillers and binders to guide formulation scientists in the development of tablets with better subdivision performance.

Development of a High-Performance Liquid Chromatographic Method for Asiaticoside Quantification in Different Skin Layers after Topical Application of a Centella asiatica Extract.

The topical application of Centella asiatica extract has been commonly used for many different purposes but especially for cosmetic use in the treatment of gynoid lipodystrophy. Asiaticoside, the most active component in this extract, is responsible for its therapeutic activities. However, little is known to date about asiaticoside skin penetration. Thus, an analytical method for asiaticoside quantification in different skin layers after the topical application of C. asiatica extract was developed and skin permeation studies were performed with the plant extract to apply the analytical method developed. An extraction procedure to recover asiaticoside from the biological matrix was also developed. Asiaticoside was assayed by HPLC/UV (high-performance liquid chromatography-ultraviolet detection) using a gradient of ACN (acetonitrile) and 0.2% phosphoric acid (flow rate of 1.0 mL/min). The analytical procedure was validated according to U. S. Food and Drug Administration guidelines. Selectivity was shown, as endogenous skin components did not interfere with the asiaticoside peak. Analytical curve was linear (3 to 60 µg/mL) and the lower limit of quantification was determined (3 µg/mL). Asiaticoside recoveries from skin samples were 95.1% and 66.7% for the stratum corneum and remaining skin, respectively. After 48 h of in vitro permeation studies, a substantial amount of asiaticoside was quantified in the skin layers. The presence of asiaticoside was also detected in the receptor solution of Franz diffusion cells after 48 h (5.81 ± 1.00 µg/mL). The method was reliable and reproducible for asiaticoside quantification in skin samples, thereby making it possible to determine the cutaneous penetration profile of this drug in permeation studies.

Compacted Multiparticulate Systems for Colon-Specific Delivery of Ketoprofen.

Pellet-containing tablets for colon-specific drug delivery present higher targeting efficiency and lower costs when compared with monolithic tablets and pellet-filled capsules, respectively. In this study, pellets containing ketoprofen were coated with different acrylic polymers and submitted to compaction. The influence of formulation and process factors on film integrity was then evaluated. Pellets were prepared via extrusion-spheronization and coated using two acrylic polymers (Eudragit® FS 30 D and Opadry® 94 k28327, PMMA and PMA, respectively). The resulting pellets were mixed with placebo granules and compressed in a hydraulic press. Multiple regression showed that ketoprofen release from pellet-containing tablets is predominantly influenced by pellet content, hardness, friability, and disintegration time. PMA-containing tablets prepared under low compaction force or with low pellet content showed rapid disintegration (<1 min) and ketoprofen release similar to those of uncompressed coated pellets (∼30% at 360 min of experiment). On the other hand, PMMA-containing tablets showed a higher rupture level, and those prepared with higher pellet content gave rise to a non-disintegrating matrix. Coated pellets were shown to be able to target ketoprofen to the colonic region. Targeting capacity was dependent on the physicochemical characteristics of the tablets.

Improvement of enalapril maleate chemical stability by high shear melting granulation.

Enalapril maleate is a widely used drug, which is chemically unstable when mixed with excipients resulting in enalaprilat and diketopiperazine as the main degradation products. The preparation of enalapril sodium salt has been used to improve drug stability in solid dosage forms; however, product rejection is observed when the chemical reaction for obtaining the sodium salt is not completely finished before packaging. In this study, granules were prepared by melting granulation using stearic acid or glyceryl monostearate, with a view to developing more stable enalapril maleate solid dosage forms. The granules were prepared in a laboratory-scale high shear mixer and compressed in a rotary machine. Size distribution, flow properties, in vitro drug release and enalapril maleate chemical stability were evaluated and compared with data obtained from tablets prepared without hydrophobic binders. All formulations showed good physical properties and immediate drug release. The greatest improvement in the enalapril maleate stability was observed in formulations containing stearic acid. This study showed that hot melting granulation could be successfully used to prepare enalapril maleate granules which could substitute the in situ formation of enalapril sodium salt, since they provided better enalapril stability in solid dosage forms.

Supercritical fluid (SCF)-assisted preparation of cyclodextrin-based poly(pseudo)rotaxanes for transdermal purposes.

This study aims to investigate the effect of the preparation of solid dispersions using supercritical CO2 (scCO2) on the physicochemical properties and the performance of supramolecular gels based on polymer-cyclodextrin (CD) interactions (named poly(pseudo)rotaxanes, PPR) envisaging a transdermal administration. Solid dispersions containing Soluplus®, the antihypertensive drug carvedilol (CAR), and CD (αCD or HPßCD) were prepared and characterized by HPLC, XRPD, FTIR, and DSC. PPRs prepared from solid dispersions (SCF gels) and the corresponding physical mixtures (PM gels) were analyzed regarding rheology, morphology, in vitro drug diffusion, and ex vivo drug skin permeation. The application of scCO2 led to the loss of the crystalline lattice of CAR while preserving its chemical identity. On the contrary, αCD crystals were still present in the SCF solid dispersions. SCF gels were more uniform than their corresponding PM, and the supercritical treatment resulted in changes in the rheological behavior, reducing the viscosity. CAR in vitro diffusion was significantly higher (p < 0.05) for the αCD-based SCF gel than its corresponding PM gel. Drug skin permeation showed a significant increase in drug flux from CD-based SCF gels (containing αCD or HPßCD) compared to corresponding PM gels. Additionally, the pretreatment of the skin with αCD exhibited increased CAR permeation, suggesting an interaction between αCD and the skin membrane. Results evidenced that SCF processing decisively modified the properties of the supramolecular gels, particularly those prepared with αCD.

Cyclodextrin inclusion complex of a multi-component natural product by hot-melt extrusion.

This study aimed to investigate whether hot-melt extrusion (HME) processing can promote molecular encapsulation of a multi-component natural product composed of volatile and pungent hydrophobic substances (ginger oleoresin (OR)) with cyclodextrins. 6-Gingerol and 6-shogaol, the biomarkers of ginger OR, were quantified by HPLC. Phase-solubility studies were performed using ß-cyclodextrin (ßCD) and hydroxypropyl-ß-cyclodextrin (HPßCD) for ginger OR complexation. Solid complexes were then prepared by thermal (HME)- and solvent (slurry (SL))-based methods. Morphology, thermal behavior, solubility, in vitro dissolution, and in vivo anti-inflammatory activity were evaluated. HPßCD gave rise to AL-type complexes with ginger OR, whereas ßCD led to materials with limited solubility. Ginger OR was complexed with HPßCD by HME without significant change in gingerol and shogaol content. Additionally, thermogravimetric analysis (TGA) suggested higher volatile retention in HME complexes than in SL ones. Shogaol and gingerol solubility and dissolution significantly increased from SL and HME complexes compared with ginger OR. In turn, 1:2 OR/HPßCD HME complex showed higher 6-shogaol solubility than SL, associated with a gradual release. The carrageenan-induced pleurisy test showed that the anti-inflammatory activity of ginger OR was maintained after complexation with HPßCD. The complexes significantly decrease the levels of IL-1ß and inhibit cell migration. HME complex showed performance equivalent to the positive control and superior to the SL material. Taken together, these results indicate that HME can be useful for promoting the molecular encapsulation of complex natural products that contain volatile and thermolabile substances. HME complexes showed better in vivo and in vitro performance than complexes prepared using the solvent-based method.

Poly(pseudo)rotaxanes formed by mixed micelles and α-cyclodextrin enhance terbinafine nail permeation to deeper layers.

This work aimed to develop water-based formulations for onychomycosis topical treatment using micelles of small pegylated surfactants associated with α-cyclodextrin (αCD) to deliver terbinafine to the nail. Kolliphor® RH40 (RH40) and Gelucire® 48/16 (GEL) single and mixed micelles (RH40:GEL 1:1) were prepared. αCD was added to the surfactants dispersions to form poly(pseudo)rotaxanes (PPR). Formulations were characterized in terms of drug solubilization (3 to 34-fold increase), particle size (9-11 nm) and Z-potential (+0.3 - +1.96 mV), blood compatibility (non-hemolytic), rheological behavior (solid-like viscoelastic properties after 5-10% αCD addition), drug release and interaction with the nail plate. GEL micelles and surfactant-10% αCD PPRs notably hydrated the nail plate. The high viscosity of PPR led to a slower drug release, except for RH40:GEL +10% αCD that surprisingly released terbinafine faster. The RH40:GEL +10% αCD formulation delivered twice more amount of terbinafine to deeper regions of nail plate compared to other formulations. The results evidenced the potential of PPR formed by small pegylated surfactants as a water-based formulation for nail drug delivery.

Three-dimensional printed personalized drug devices with anatomical fit: a review.

OBJECTIVES: Three-dimensional printing (3DP) has opened the era of drug personalization, promising to revolutionize the pharmaceutical field with improvements in efficacy, safety and compliance of the treatments. As a result of these investigations, a vast therapeutic field has opened for 3DP-loaded drug devices with an anatomical fit. Along these lines, innovative dosage forms, unimaginable until recently, can be obtained. This review explores 3DP-engineered drug devices described in recent research articles, as well as in patented inventions, and even devices already produced by 3DP with drug-loading potential. KEY FINDINGS: 3D drug-loaded stents, implants and prostheses are reviewed, along with devices produced to fit hard-to-attach body parts such as nasal masks, vaginal rings or mouthguards. The most promising 3DP techniques for such devices and the complementary technologies surrounding these inventions are also discussed, particularly the scanners useful for mapping body parts. Health regulatory concerns regarding the new use of such technology are also analysed. SUMMARY: The scenario discussed in this review shows that for wearable 3DP drug devices to become a tangible reality to users, it will be necessary to overcome the existing regulatory barriers, create new interfaces with electronic systems and improve the mapping mechanisms of body surfaces.

Combination of lipid nanoparticles and iontophoresis for enhanced lopinavir skin permeation: Impact of electric current on lipid dynamics.

Nanostructured lipid carriers (NLC)-loaded with lopinavir (LPV) were developed for its iontophoretic transdermal delivery. Electronic paramagnetic resonance (EPR) spectroscopy of fatty acid spin labels and differential scanning calorimetry (DSC) were applied to investigate the lipid dynamic behavior of NLC before and after the electrical current. In vitro release and permeation studies, with and without anodic and cathodic iontophoresis were also performed. NLC-LPV had nanometric size (179.0 ± 2.5 nm), high drug load (∼x223C 4.14%) and entrapment efficiency (EE) (∼x223C 80%). NLC-LPV was chemically and physically stable after applying an electric current. The electrical current reduced EE after 3 h (67.21 ± 2.64%), resulting in faster LPV in vitro release. EPR demonstrated that iontophoresis decreased NLC lipid dynamics, which is a long-lasting effect. DSC studies demonstrated that electrical current could trigger the polymorphic transition of NLC and drug solubilization in the lipid matrix. NLC-LPV, combined with iontophoresis, allowed drug quantification in the receptor medium, unlike unloaded drugs. Cathodic iontophoresis enabled the quantification of about 7.9 µg/cm2 of LPV in the receptor medium. Passive NLC-LPV studies had to be done for an additional 42 h to achieve similar concentrations. Besides, anodic iontophoresis increased by 1.8-fold the amount of LPV in the receptor medium, demonstrating a promising antiviral therapy strategy.