The Unexpected Helical Supramolecular Assembly of a Simple Achiral Acetamide Tecton Generates Selective Water Channels.

Invited for the cover of this issue is the collaborative research team coordinated by Arie van der Lee at the University of Montpellier. The image depicts chiral channels with highly mobile water molecules resulting from the robust self-organization of a simple achiral acetamide. Fully reversible release and re-uptake of water molecules takes place near ambient conditions, with efficient water transport and a good selectivity against NaCl suggesting it to be an efficient candidate for desalination processes. Read the full text of the article at 10.1002/chem.20200383.

The Unexpected Helical Supramolecular Assembly of a Simple Achiral Acetamide Tecton Generates Selective Water Channels.

Achiral 2-hydroxy-N-(diphenylmethyl)acetamide (HNDPA) crystallizes in the P61 chiral space group as a hydrate, building up permeable chiral crystalline helical water channels. The crystallization-driven chiral self-resolution process is highly robust, with the same air-stable crystalline form readily obtained under a variety of conditions. Interestingly, the HNDPA supramolecular helix inner pore is filled by a helical water wire. The whole edifice is mainly stabilized by robust hydrogen bonds involving the HNDPA amide bonds and CH… π interactions between the HNDPA phenyl groups. The crystalline structure shows breathing behavior, with completely reversible release and re-uptake of water inside the chiral channel under ambient conditions. Importantly, the HNDPA channel is able to transport water very efficiently and selectively under biomimetic conditions. With a permeability per channel of 3.3 million water molecules per second in large unilamellar vesicles (LUV) and total selectivity against NaCl, the HNDPA channel is a very promising functional nanomaterial for future applications.

Asymmetric Solvent-Annealed Triblock Terpolymer Thick Films Topped by a Hexagonal Perforated Lamellar Nanostructure.

Asymmetric and nanostructured polystyrene-block-poly(2-vinyl pyridine)-block-poly(ethylene oxide) (PS-b-P2VP-b-PEO or SVEO, S:V:EO ≈ 56:34:10, 79.5 kg mol-1 ) thick films blended with 20 wt% of a short PS homopolymer (hPS, 10.5 kg mol-1 ) are achieved by combining the non-solvent induced phase separation (NIPS) process with a solvent vapor annealing (SVA) treatment. Here, the NIPS step allows for the formation of a highly-permeable sponge-like substructure topped by a dense thin layer exhibiting poorly-ordered nanopores while the subsequent SVA treatment enables to reconstruct the material top surface into a porous monolayer of well-ordered hexagonal perforated lamellae (HPL). This optimized film architecture generated by NIPS-SVA shows a water permeability of 860 L h-1 m-2 bar-1 , which is roughly two times higher than the flux measured through NIPS made PS-b-P2VP-b-PEO/hPS materials having poorly-ordered nanopores. The post-SVA treatment is also revealed as a powerful tool to tailor the thickness of the nanostructure formed within the blended material because monoliths entirely composed of a HPL phase are produced by increasing the time of exposure to a chloroform stream. The water flux of such PS-b-P2VP-b-PEO/hPS monoliths is found to be an order of magnitude lower than that of their asymmetric film homologues.

Insights on the Electrocatalytic Seawater Splitting at Heterogeneous Nickel-Cobalt Based Electrocatalysts Engineered from Oxidative Aniline Polymerization and Calcination.

Given the limited access to freshwater compared to seawater, a growing interest surrounds the direct seawater electrolysis to produce hydrogen. However, we currently lack efficient electrocatalysts to selectively perform the oxygen evolution reaction (OER) over the oxidation of the chloride ions that are the main components of seawater. In this contribution, we report an engineering strategy to synthesize heterogeneous electrocatalysts by the simultaneous formation of separate chalcogenides of nickel (NiSx, x = 0, 2/3, 8/9, and 4/3) and cobalt (CoSx, x = 0 and 8/9) onto a carbon-nitrogen-sulfur nanostructured network. Specifically, the oxidative aniline polymerization in the presence of metallic cations was combined with the calcination to regulate the separate formation of various self-supported phases in order to target the multifunctional applicability as both hydrogen evolution reaction (HER) and OER in a simulated alkaline seawater. The OER's metric current densities of 10 and 100 mA cm-2 were achieved at the bimetallic for only 1.60 and 1.63 VRHE, respectively. This high-performance was maintained in the electrolysis with a starting voltage of 1.6 V and satisfactory stability at 100 mA over 17 h. Our findings validate a high selectivity for OER of ~100%, which outperforms the previously reported data of 87-95%.

Joint Experimental and Computational Investigation of the Flexibility of a Diacetylene-Based Mixed-Linker MOF: Revealing the Existence of Two Low-Temperature Phase Transitions and the Presence of Colossal Positive and Giant Negative Thermal Expansions.

Solvothermal reaction in N,N-dimethylformamide (DMF) between 1,6-bis(1-imidazolyl)-2,4-hexadiyne monohydrate (L1⋅H2 O), isophthalic acid (H2 L2), and Zn(NO3 )2 ⋅6 H2 O gives the diacetylene-based mixed-ligand coordination polymer {[Zn(L1)(L2)](DMF)2 }n (UMON-44) in 38 % yield. Combination of DSC with variable-temperature single-crystal X-ray diffraction revealed the occurrence of two phase transitions spanning the ranges 129-144 K and 158-188 K. Furthermore, the three structurally similar phases of UMON-44 show giant negative and/or colossal positive thermal expansions. These unusual phenomena exist without any change in the contents of the unit cell. DFT calculations using the PBE+D3 dispersion scheme were able to distinguish between these polymorphs by accurately reproducing their salient structural features, although corrections in the size of the unit cell turned out to be necessary for the high-temperature phase to account for its large thermal expansion. In addition, the infrared spectra (vibration frequencies and peak intensities) of these theoretical models were calculated, allowing for univocal identification of the corresponding polymorphs. Last, the limits of our computational method were tested by calculating the phase transition temperatures and their associated enthalpies, and the derived figures compare favorably with the values determined experimentally.

Design of three-dimensional electrocatalytic all-in-one electrodes by leveraging electrospinning and calcination approaches.

We report the combination of electrospinning and calcination to synthesize many free-standing electrocatalytic electrodes made of nanostructured nickel particles (active sites) and three-dimensional carbon microfibers (support). Precisely, we have used five different nickel precursors to elucidate the nitrogen origin (polyacrylonitrile or metal salts) and the impact on the electrocatalytic properties.

3D printing of cellulose nanocrystals based composites to build robust biomimetic scaffolds for bone tissue engineering.

Cellulose nanocrystals (CNC) are drawing increasing attention in the fields of biomedicine and healthcare owing to their durability, biocompatibility, biodegradability and excellent mechanical properties. Herein, we fabricated using fused deposition modelling technology 3D composite scaffolds from polylactic acid (PLA) and CNC extracted from Ficus thonningii. Scanning electron microscopy revealed that the printed scaffolds exhibit interconnected pores with an estimated average pore size of approximately 400 µm. Incorporating 3% (w/w) of CNC into the composite improved PLA mechanical properties (Young's modulus increased by ~ 30%) and wettability (water contact angle decreased by ~ 17%). The mineralization process of printed scaffolds using simulated body fluid was validated and nucleation of hydroxyapatite confirmed. Additionally, cytocompatibility tests revealed that PLA and CNC-based PLA scaffolds are non-toxic and compatible with bone cells. Our design, based on rapid 3D printing of PLA/CNC composites, combines the ability to control the architecture and provide improved mechanical and biological properties of the scaffolds, which opens perspectives for applications in bone tissue engineering and in regenerative medicine.

Nanostructured Carbon-Nitrogen-Sulfur-Nickel Networks Derived From Polyaniline as Bifunctional Catalysts for Water Splitting.

The development of reliable production routes for sustainable hydrogen (H2), which is an essential feedstock for industrial processes and energy carrier for fuel cells, is needed. It appears to be an unavoidable alternative to significantly reduce the dependence on conventional energy sources based on fossil fuels without increasing the atmospheric CO2 levels. Among the different power-to-X scenarios to access high purity H2, the electrochemical approach based on electrolysis looks to be a promising sustainable solution at both the small and large industrial scales. However, the practical realization of this important opportunity faces several challenges, including the efficient design of cost-effective catalytic materials to be used as a cathode with improved intrinsic and durable activity. In this contribution, we report the design and development of efficient nanostructured catalysts for the electrocatalytic hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in aqueous media, whereby noble metal-free elements are embedded in a matrix of a conducting polymer, polyaniline (PANI). To increase the electrical conductivity and further the electrocatalytic ability toward HER of the chemically polymerized PANI in the presence of nickel (II) salt (nitrate), the PANI-based materials have first been stabilized at a mild temperature of 250-350°C in air and then carbonized at 800-1,000°C under nitrogen gas to convert the chemical species into nitrogen, sulfur, nickel, and carbon nanostructured networks (CNNs). Different physicochemical (TGA-DSC, Raman spectroscopy, XRD, SEM, EDX, ICP, CHNS, BET, and XPS) and electrochemical (voltammetry and electrochemical impedance spectrometry) methods have been integrated to characterize the as-synthesized CNNs materials and interrogate the relationship of material-to-performance. It has been found that those synthesis conditions allow for the substantial increase of the electrocatalytic performance toward HER and OER in alkaline media in terms of the onset potential and charge transfer resistance and overpotential at the specific activity of 10 milliamps per square centimeter, thus ranking the present materials among the most efficient noble metal-free catalysts and making them possible candidates for integration in practical low-energy consumption alkaline electrolyzers.

Temperature induced single-crystal-to-single-crystal transformations and structure directed effects on magnetic properties.

The binding of CoII, NiII, and CuII cations to the lithium 3-pyridinesulfonate ligand in an aqueous solution leads to single crystals of coordination polymers 1-3. The solid-state architectures of 1-3 which resulted from the combination of ligand-water heterocomplexation processes are linear coordination polymers packed into parallel alternatively stratified layers. These layers are interconnected through intermolecular hydrogen-bonding interactions occurring between the coordinated water molecules and the noncoordinating oxygen atoms of the sulfonate groups. Consequently, this leads to the formation of the cross-linked 3D (1, 2) or layered 2D (3) networks exhibiting 12-point or four-point hydrogen bond contacts between each unit with eight or four adjacent neighbors, respectively. The reversible structural rearrangement of these frameworks proceeds from the "relaxed" room-temperature phase to the "contracted" low-temperature phase in response to an external thermal stimulus. The reversibility of the contraction/relaxation process has been tested and confirmed by X-ray analysis. Motions toward shortening intermolecular distances have the consequence of increasing the degree of magnetic interaction between the metal ions. The magnetic measurements carried out in the range 1.8-400 K on the three compounds show an unusual change from antiferromagnetic to ferromagnetic behavior related to the structural variations recorded at low temperatures and to the loss of water above 350 K.