RESUMEN
The facile synthesis of chiral materials is of paramount importance for various applications. Supramolecular preorganization of monomers for thermal polymerization has been proven as an effective tool to synthesize carbon and carbon nitride-based (CN) materials with ordered morphology and controlled properties. However, the transfer of an intrinsic chemical property, such as chirality from supramolecular assemblies to the final material after thermal condensation, was not shown. Here, we report the large-scale synthesis of chiral CN materials capable of enantioselective recognition. To achieve this, we designed supramolecular assemblies with a chiral center that remains intact at elevated temperatures. The optimized chiral CN demonstrates an enantiomeric preference of ca. 14 %; CN electrodes were also prepared and show stereoselective interactions with enantiomeric probes in electrochemical measurements. By adding chirality to the properties transferrable from monomers to the final product of a thermal polymerization, this study confirms the potential of using supramolecular precursors to produce carbon and CN materials and electrodes with designed chemical properties.
RESUMEN
Possible routes for intra-cluster bond formation (ICBF) in protonated serine dimers have been studied. We found no evidence of ICBF following low energy collision-induced dissociation (in correspondence with previous works), however, we do observe clear evidence for ICBF following photon absorption in the 4.6-14â eV range. Moreover, the comparison of photon-induced dissociation measurements of the protonated serine dimer to those of a protonated serine dipeptide provides evidence that ICBF, in this case, involves peptide bond formation (PBF). The experimental results are supported by ab initio molecular dynamics and exploration of several excited state potential energy surfaces, unraveling a pathway for PBF following photon absorption. The combination of experiments and theory provides insight into the PBF mechanisms in clusters of amino acids, and reveals the importance of electronic excited states reached upon UV/VUV light excitation.
RESUMEN
This work investigates, for the first time, the application of sonochemically prepared bovine serum albumin (BSA) microspheres (BSAMS) as adsorbents of industrial organic pollutant dyes, such as rhodamine B (RhB), rhodamine 6G (Rh6G), and methylene blue (MB). These dyes also serve as model compounds for other organic pollutants such as bisphenol A and 2-nitrophenol. Adsorption kinetics of the dyes by the BSAMS was studied using pseudo-first-order (PFO) and pseudo-second-order (PSO) kinetic models. It was found that RhB follows PFO, with an adsorption capacity, qe,cal, of 7.9 mg/g, which was closer to the experimental adsorption capacity of qe,exp. of 7.6 mg/g. However, MB and Rh6G were controlled by PSO kinetics, with a qe,cal of 5.6 mg/g for MB and 6.6 mg/g for Rh6G, closer to the experimental adsorption capacity of 5.7 and 6.4 mg/g, respectively. The intraparticle diffusion (ID) model applied to the three dyes indicated multi-linearity with ID as the rate-limiting step in the adsorption process. Furthermore, the adsorption equilibria for each of the organic pollutants were studied through various isotherm models such as Langmuir, Freundlich, Temkin, and Halsey, which indicated physical interaction between the BSAMS and the dye pollutants, thus suggesting the applicability of the BSAMS as pollutant adsorbent materials. It was found that the BSAMS can effectively remove RhB, MB, and Rh6G from wastewater with efficiencies of 95.5, 83.3, and 97.9%, respectively.
RESUMEN
Many inorganic materials can form crystals, but little is known about their enantioselective crystallization. Herein, we report on the enantioselective crystallization of ϵ-Zn(OH)2 (Wulfingite) chiral crystals by using amino acids. Crystals of ϵ-Zn(OH)2 were crystallized from supersaturated sodium hydroxide and zinc nitrate aqueous solutions in the presence of l- or d-arginine. All of the chiral measurements, such as selective chiral adsorption by circular dichroism (CD), chiral chromatography, and polarimetry measurements, clearly show chiral discrimination during the crystallization of ϵ-Zn(OH)2 . In addition, a new method has been developed for identifying chirality in crystals by using electron paramagnetic resonance (EPR). Although the values of chiral induction of the ϵ-Zn(OH)2 crystals obtained are somewhat low, these values are still significant because they demonstrate that enantioselectivity during the crystallization of chiral inorganic crystals with chiral additives can be achieved. The method can be applied to many chiral inorganic systems. Understanding and controlling the crystallization of chiral inorganic crystals is important for gaining knowledge on the interaction of chiral molecules with inorganic surfaces. This knowledge can lead to an understanding of basic scientific questions such as the evolution of homochirality in biomolecules and the development of chiral inorganic crystals for a variety of purposes such as asymmetric catalysis and optical applications.
RESUMEN
The pharmaceutical industry is in need of new techniques to identify the chirality of solids due to regulatory and safety concerns regarding the biological activity of enantiomers. In this study, we present for the first time the application of low-frequency Raman spectroscopy as a new and sensitive method for analyzing the chiral purity of crystals. Using this method, we were able to identify small amounts, as low as 1 % w/w, of an enantiomer in racemic crystals. To demonstrate the capabilities of the method, we used a model system based on chiral crystals of enantiopure, racemic crystals and their mixtures in various ratios. We found that the low-frequency Raman spectra of racemic and enantiopure crystals are significantly different, reflecting the different hydrogen bond networks. Moreover, a comparison of the sensitivity of enantiomeric excess in chiral crystals to that of circular dichroism and X-ray diffraction measurements showed that low-frequency Raman attains high sensitivity comparable to chiral optical methods used for solutions. Overall, our proposed approach of using Raman spectroscopy for determining enantiomeric excess in crystals is simple, fast, and offers a high degree of chiral sensitivity.
RESUMEN
One of the most powerful techniques that are currently available to measure thermodynamic parameters such as enthalpy (ΔH), Gibbs free energy (ΔG), entropy changes (ΔS), and binding affinity in chemical reactions is isothermal titration calorimetry (ITC). Recent advances in instrumentation have facilitated the development of ITC as a very essential analytical tool in biology and chemistry. In this article, we will focus on a review of the literature on the application of ITC for the study of chiral systems and chiral interactions. We present studies in which the ITC technique is used to study chiral interactions, for instance in chiral solutions, chiral organometallic complexes, guest-host chiral binding interactions, and biological macromolecules. Finally, we put strong emphasis on the most recent application of ITC for the study of chirality in nanosystems and at the nanoscale.
RESUMEN
We present a new method for differentiating racemic crystals from enantiopure crystals. Recently, developments in optical filters have enabled the facile use of Raman spectroscopy to detect low-frequency vibrational (LFV) modes. Here, for the first time, we use Raman spectroscopy to characterize the LFV modes for crystalline organic materials composed of chiral molecules. The LF-Raman spectra of racemic and enantiopure crystals exhibit a significant variation, which we attribute to different hydrogen-bond networks in the chiral crystal structures. Across a representative set of amino acids, we observed that when comparing racemic versus enantiopure crystals, the available LFV modes and their relative scattering intensity are strong functions of side chain polarity. Thus, LF-Raman can be used as a method that is complementary to the currently used methods for characterizing crystal chirality due to simpler, faster, and more sensitive measurements, along with the small sample size required, which is limited by the laser-beam diameter in the focus.
RESUMEN
Ionic liquids have been intensively developed for the last few decades and are now used in a wide range of applications, from electrochemistry to catalysis and nanotechnology. Many of these applications involve ionic liquid interfaces with other liquids and solids, the subnanometric experimental study of which is highly demanding, and has been little studied to date. We present here a study of mercury-supported Langmuir films of imidazolium-based ionic liquids by surface tensiometry and X-ray reflectivity. The charge-delocalized ionic liquids studied here exhibit no 2D lateral order but show diffuse surface-normal electron density profiles exhibiting gradual mercury penetration into the ionic liquid film, and surface-normal structure evolution over a period of hours. The effect of increasing the nonpolar alkyl chain length was also investigated. The results obtained provide insights into the interactions between these ionic liquids and liquid mercury and about the time evolution of the structure and composition of their interface.
RESUMEN
Amino-acid-based chiral surfactants with polymerizable moieties are synthesized, and a versatile approach to prepare particles thereof with a chiral surface functionality is presented. As an example of an application, the synthesized particles are tested for their ability as nucleating agents in the enantioselective crystallization of amino acid conglomerate systems, taking rac-asparagine as a model system. Particles resulting from chiral surfactants with different tail groups are compared and the results demonstrate that only the chiral nanoparticles made of the polymerizable surfactant are able to act efficiently as nucleation agent in enantioselective crystallization.
Asunto(s)
Aminoácidos/química , Nanopartículas/química , Polimerizacion , Tensoactivos/síntesis química , Estructura Molecular , Polímeros/síntesis química , Polímeros/química , Estereoisomerismo , Tensoactivos/químicaRESUMEN
One of the greatest challenges in modern chemical processing is to achieve enantiospecific control in chemical reactions using chiral media such as chiral mesoporous materials. Herein, we describe a novel and effective synthetic pathway for the preparation of enantioselective nanoporous carbon, based on chiral ionic liquids (CILs). CILs of phenylalanine (CIL(Phe)) are used as precursors for the carbonization of chiral mesoporous carbon. We employ circular dichroism spectroscopy, isothermal titration calorimetry (ITC), and chronoamperometry in order to demonstrate the chiral nature of the mesoporous carbon. The approach presented in this paper is highly significant for the development of a new type of chiral porous materials for enantioselective chemistry. In addition, it contributes significantly to our understanding of the structure and nature of chiral nanoporous materials and surfaces.
RESUMEN
Coal power plants are producing huge amounts of coal ash that may be applied to a variety of secondary uses. Class F fly ash may act as an excellent scrubber and fixation reagent for highly acidic wastes, which might also contain several toxic trace elements. This paper evaluates the potential of using Class F fly ashes (<20% CaO), in combination with excessive fines from the limestone quarry industry as a fixation reagent. The analysis included leaching experiments (EN12457-2) and several analytical techniques (ICP, SEM, XRD, etc.), which were used in order to investigate the fixation procedure. The fine sludge is used as a partial substitute in concrete that can be used in civil engineering projects, as it an environmentally safe product.
Asunto(s)
Ceniza del Carbón , Residuos Peligrosos , Residuos , Carbonato de Calcio , Ceniza del Carbón/análisis , Humanos , Microscopía Electrónica de Rastreo , Centrales Eléctricas , Aguas del Alcantarillado , Administración de Residuos/métodos , Difracción de Rayos XRESUMEN
Chiral polymeric nanoparticles are of prime importance, mainly due to their enantioselective potential, for many applications such as catalysis and chiral separation in chromatography. In this article we report on the preparation of chiral polymeric nanoparticles by miniemulsion polymerization. In addition, we describe the use of isothermal titration calorimetry (ITC) to measure the chiral interactions and the energetics of the adsorption of enantiomers from aqueous solutions onto chiral polymeric nanoparticles. The characterization of chirality in nano-systems is a very challenging task; here, we demonstrate that ITC can be used to accurately determine the thermodynamic parameters associated with the chiral interactions of nanoparticles. The use of ITC to measure the energetics of chiral interactions and recognition at the surfaces of chiral nanoparticles can be applied to other nanoscale chiral systems and can provide further insight into the chiral discrimination processes of nanomaterials.
Asunto(s)
Calorimetría , Nanopartículas/química , Polímeros/química , Calor , Tamaño de la Partícula , EstereoisomerismoRESUMEN
In this era of advanced technology and innovation, infectious diseases still cause significant morbidity and mortality, which need to be addressed. Despite overwhelming success in the development of vaccines, transmittable diseases such as tuberculosis and AIDS remain unprotected, and the treatment is challenging due to frequent mutations of the pathogens. Formulations of new or existing drugs with polymeric materials have been explored as a promising new approach. Variations in shape, size, surface charge, internal morphology, and functionalization position polymer particles as a revolutionary material in healthcare. Here, an overview is provided of major diseases along with statistics on infection and death rates, focusing on polymer-based treatments and modes of action. Key issues are discussed in this review pertaining to current challenges and future perspectives.
Asunto(s)
Enfermedades Transmisibles , Tuberculosis , Vacunas , Humanos , Polímeros , Tuberculosis/diagnóstico , Tuberculosis/tratamiento farmacológico , Sistemas de Liberación de Medicamentos , Enfermedades Transmisibles/diagnóstico , Enfermedades Transmisibles/tratamiento farmacológicoRESUMEN
Traumatic injuries, neurodegenerative diseases and oxidative stress serve as the early biomarkers for neuronal damage and impede angiogenesis and subsequently neuronal growth. Considering this, the present work aimed to develop a poly(N-acryloylglycine)-co-(acrylamide)-co-(N-acryloylglutamate) hydrogel [p(NAG-Ac-NAE)] with angiogenesis/neurogenesis properties. As constituents of this polymer modulate their vital role in biological functions, inhibitory neurotransmitter glycine regulates neuronal homeostasis, and glutamatergic signalling regulates angiogenesis. The p(NAG-Ac-NAE) hydrogel is a highly branched, biodegradable and pH-responsive polymer with a very high swelling behavior of 6188%. The mechanical stability (G', 2.3-2.7 kPa) of this polymeric hydrogel is commendable in the differentiation of mature neurons. This hydrogel is biocompatible (as tested in HUVEC cells) and helps to proliferate PC12 cells (152.7 ± 13.7%), whereas it is cytotoxic towards aggressive cancers such as glioblastoma (LN229 cells) and triple negative breast cancer (TNBC; MDA-MB-231 cells) and helps to maintain the healthy cytoskeleton framework structure of primary cortical neurons by facilitating the elongation of the axonal pathway. Furthermore, FACS results revealed that the synthesized hydrogel potentiates neurogenesis by inducing the cell cycle (G0/G1) and arresting the sub-G1 phase by limiting apoptosis. Additionally, RT-PCR results revealed that this hydrogel induced an increased level of HIF-1α expression, providing preconditioning effects towards neuronal cells under oxidative stress by scavenging ROS and initiating neurogenic and angiogenic signalling. This hydrogel further exhibits more pro-angiogenic activities by increasing the expression of VEGF isoforms compared to previously reported hydrogels. In conclusion, the newly synthesized p(NAG-Ac-NAE) hydrogel can be one of the potential neuroregenerative materials for vasculogenesis-assisted neurogenic applications and paramount for the management of neurodegenerative diseases.
Asunto(s)
Hidrogeles , Estrés Oxidativo , Estrés Oxidativo/efectos de los fármacos , Hidrogeles/química , Hidrogeles/farmacología , Hidrogeles/síntesis química , Humanos , Animales , Ratas , Materiales Biocompatibles/química , Materiales Biocompatibles/farmacología , Materiales Biocompatibles/síntesis química , Neurogénesis/efectos de los fármacos , Células Endoteliales de la Vena Umbilical Humana/efectos de los fármacos , Células PC12 , Neovascularización Fisiológica/efectos de los fármacos , Proliferación Celular/efectos de los fármacos , Polímeros/química , Polímeros/farmacología , Antineoplásicos/farmacología , Antineoplásicos/química , Antineoplásicos/síntesis químicaRESUMEN
Biofilms are consortia of bacteria that are held together by an extracellular matrix. Cyanobacterial biofilms, which are highly ubiquitous and inhabit diverse niches, are often associated with biological fouling and cause severe economic loss. Information on the molecular mechanisms underlying biofilm formation in cyanobacteria is scarce. We identified a mutant of the cyanobacterium Synechococcus elongatus, which unlike the wild type, developed biofilms. This biofilm-forming phenotype is caused by inactivation of homologues of type II secretion /type IV pilus assembly systems and is associated with impairment of protein secretion. The conditioned medium from a wild-type culture represses biofilm formation by the secretion-mutants. This suggested that the planktonic nature of the wild-type strain is a result of a self-suppression mechanism, which depends on the deposition of a factor to the extracellular milieu. We also identified two genes that are essential for biofilm formation. Transcript levels of these genes are elevated in the mutant compared with the wild type, and are initially decreased in mutant cells cultured in conditioned medium of wild-type cells. The particular niche conditions will determine whether the inhibitor will accumulate to effective levels and thus the described mechanism allows switching to a sessile mode of existence.
Asunto(s)
Biopelículas , Synechococcus/fisiología , Perfilación de la Expresión Génica , Regulación Bacteriana de la Expresión Génica , Mutación , Synechococcus/genética , Synechococcus/metabolismoRESUMEN
In this paper, we describe for the first time the synthesis of new chiral nanosized metal oxide surfaces based on chiral self-assembled monolayers (SAMs) coated with metal oxide (TiO2) nanolayers. In this new type of nanosize chiral surface, the metal oxide nanolayers enable the protection of the chiral self-assembled monolayers while preserving their enantioselective nature. The chiral nature of the SAM/TiO2 films was characterized by variety of unique techniques, such as second-harmonic generation circular dichroism (SHG-CD), quartz crystal microbalance, and chiral adsorption measurements with circular dichroism spectroscopy. The chiral resolution abilities of the SAMs coated with metal oxide (TiO2) nanolayers were investigated in the crystallization of a racemic mixture of threonine and glutamic acid. Our proposed methodology for the preparation of nanoscale chiral surfaces described in this article could open up opportunities in other fields of chemistry, such as chiral catalysis.
RESUMEN
Chiral polymeric particles (CPPs) were studied extensively in recent years due to their importance in pharmaceutical applications. Here, nanosized CPPs were synthesized and applied as catalysts for direct asymmetric aldol reaction. The CPPs were prepared by miniemulsion or inverse miniemulsion based on various chiral amino acid derivatives and characterized by dynamic light scattering and scanning electron microscopy. The nanoparticles with spherical structure between 250 and 400 nm and high chiral surface area were used as catalysts in the aldol reaction at room temperature without additional solvent. l-tryptophan gave the highest enantiomeric excess, >86% with similar catalytic performance four times.
RESUMEN
Micro- and nano-particles are elemental for many current and developing technologies. Specifically, these particles are being used extensively in biological studies and applications, which include imaging, drug delivery and therapeutics. Recent advances have led to the development of multifunctional particles, which have the potential to further enhance their effectiveness, enabling novel applications. Therefore, many efforts have been devoted to producing well-defined particles for specific needs. However, the conventional fabrication methodologies used to develop particles are time consuming, making it extremely challenging to fine-tune the properties of the particles for multifunctional applications. Herein, we present a simple and facile method to fabricate dome-shaped micron- and nano-sized particles via a robust physical route. The presented method enables particles to be designed using a vast range of materials, with different sizes and compositions. The versatility of this method enables the engineering of multifunctional particles with pre-defined properties that can be adjusted to a specific biological application. We demonstrate the fabrication of dome-shaped particles using physical vapor deposition (PVD) and a polystyrene-bead-monolayer-based mechanical mask. We show domes from several materials and coatings; in particular, we demonstrate the development process for biocompatible magnetic iron oxide domes. We find that our magnetic domes exhibit an Fe3O4 structure with a high magnetization saturation. In addition, we examine the biocompatibility of the magnetic domes by performing viability tests and morphological analysis. The ability to design and fabricate micro- and nano-particles upon request in a simple and relatively high-throughput manner opens possibilities for the development of new smart multifunctional particles for both therapeutic and diagnostic applications.
Asunto(s)
Sistemas de Liberación de Medicamentos , Compuestos Férricos , Compuestos Férricos/químicaRESUMEN
Chiral surfaces, developed in the last decade, serve as media for enantioselective chemical reactions. Until today, they have been based mostly on developments in silica templating, and are made mainly from imprints of silicate materials developed a long time ago. Here, a chiral porous activated carbon surface was developed based on a chiral ionic liquid, and the surface chemistry and pore structure were studied to lay a new course of action in the field. The enantioselectivities of surfaces are examined by using variety of methods such as circular dichroism, linear sweep voltammetry and catalysis. These techniques revealed a 28.1% preference for the D enantiomer of the amino acid proline, and linear sweep voltammetry confirmed chirality recognition by another probe. An aldol surface chiral catalytic reaction was devised and allowed to determine the root of the enantiomeric excess. These results affirm the path toward a new type of chiral surface.
RESUMEN
In this communication, we present a novel method to measure local optical dichroism (OD) in opaque crystal powder suspensions using photoacoustic (PA) effect. Our method is based upon the novel laser speckle contrast technique, in combination with a simple statistical approach, we were able to measure the OD of chiral crystals suspensions under completely random orientation.