Characterizing effects of fast melt deformation on entangled polymers in their glassy state.

Fast deformation of entangled melts is known to cause chain stretching due to affinelike straining of the entanglement network. Since the chain deformation may also result in perturbations of covalent bond angles and bond length, there are always possible enthalpic effects. In this study, we first subject polystyrene and PMMA of different molecular weights to either uniaxial melt extension or planar extension and subsequently impose rapid thermal quenching to preserve the chain deformation. Then, such pre-melt-deformed samples are annealed at various temperatures below the glass transition temperature Tg. During annealing, these samples can undergo appreciable contraction on a time scale much shorter than the alpha relaxation time. Significant retractive stress is observed when such contracting samples are held fixed during the annealing. The stress level can be nearly as high as the Cauchy stress produced during melt stretching. These observations not only allowed us to investigate glassy chain dynamics as well as the molecular nature of mechanical stress but may also suggest that pre-melt-stretched polymers can cause segmental mobilization in the glassy state. The available evidence indicates that the retractive stress is enthalpic in origin, associated with the conformational distortion at the bond level produced by melt stretching.

Metal/Ion Interactions Induced p-i-n Junction in Methylammonium Lead Triiodide Perovskite Single Crystals.

Hybrid perovskites, as emerging multifunctional semiconductors, have demonstrated dual electronic/ionic conduction properties. We report a metal/ion interaction induced p-i-n junction across slightly n-type doped MAPbI3 single crystals with Au/MAPbI3/Ag configuration based on interface dependent Seebeck effect, Hall effect and time-of-flight secondary ion mass spectrometry analysis. The organic cations (MA+) interact with Au atoms, forming positively charged coordination complexes at Au/MAPbI3 interface, whereas iodine anions (I-) can react with Ag contacts, leading to interfacial ionic polarization. Such metal/ion interactions establish a p-doped region near the Au/MAPbI3 interface due to the formation of MA+ vacancies, and an n-doped region near the Ag/MAPbI3 interface due to formation of I- vacancies, consequently forming a p-i-n junction across the crystal in Au/MAPbI3/Ag configuration. Therefore, the metal/ion interaction plays a role in determining the surface electronic structure and semiconducting properties of hybrid perovskites.

Improving mechanical properties of carbon nanotube fibers through simultaneous solid-state cycloaddition and crosslinking.

Individual carbon nanotubes (CNTs) exhibit exceptional mechanical properties. However, difficulties remain in fully realizing these properties in CNT macro-assemblies, because the weak inter-tube forces result in the CNTs sliding past one another. Herein, a simple solid-state reaction is presented that enhances the mechanical properties of carbon nanotube fibers (CNTFs) through simultaneous covalent functionalization and crosslinking. This is the first chemical crosslinking proposed without the involvement of a catalyst or byproducts. The specific tensile strength of CNTFs obtained from the treatment employing a benzocyclobutene-based polymer is improved by 40%. Such improvement can be attributed to a reduced number of voids, impregnation of the polymer, and the formation of covalent crosslinks. This methodology is confirmed using both multiwalled nanotube (MWNT) powders and CNTFs. Thermogravimetric analysis, differential scanning calorimetry, x-ray photoelectron spectroscopy, and transmission electron microscopy of the treated MWNT powders confirm the covalent functionalization and formation of inter-tube crosslinks. This simple one-step reaction can be applied to industrial-scale production of high-strength CNTFs.

Unexpected Molecular Weight Effect in Polymer Nanocomposites.

The properties of the interfacial layer between the polymer matrix and nanoparticles largely determine the macroscopic properties of polymer nanocomposites (PNCs). Although the static thickness of the interfacial layer was found to increase with the molecular weight (MW), the influence of MW on segmental relaxation and the glass transition in this layer remains to be explored. In this Letter, we show an unexpected MW dependence of the interfacial properties in PNC with attractive polymer-nanoparticle interactions: the thickness of the interfacial layer with hindered segmental relaxation decreases as MW increases, in sharp contrast to theoretical predictions. Further analyses reveal a reduction in mass density of the interfacial layer with increasing MW, which can elucidate these unexpected dynamic effects. Our observations call for a significant revision of the current understandings of PNCs and suggest interesting ways to tailor their properties.

Impact of chain microstructure on solution and thin film self-assembly of PCHD-based semi-flexible/flexible diblock copolymers.

Self-assembly of semi-flexible/flexible block copolymers in a selective solvent is examined using a set of diblock copolymers where the chain microstructure of the semi-flexible block is manipulated in order to tune chain stiffness. Conceptually, the reduced conformational space of the semi-flexible block is anticipated to alter the way the chains pack, potentially changing the structure of self-assembled aggregates in comparison to flexible diblock copolymer analogs. Semi-flexible/flexible diblock copolymers comprised of poly(styrene)-block-poly(1,3-cyclohexadiene) (PS-b-PCHD) having systematic changes in chain microstructure, as captured by the ratio of 1,4/1,2-linkages between cyclohexenyl repeat units, and molecular weight of the PCHD blocks were synthesized using anionic polymerization. These diblocks were dissolved in tetrahydrofuran (THF), which is a preferential solvent for PS, and the structures formed were examined using laser light scattering and complementary imaging techniques. Results show that PS-b-PCHD copolymers with a chain microstructure of 90% 1,4/10% 1,2 linkages between cyclohexenyl repeat units (referred to simply as 90/10) are able to micellize, forming spherical structures, while diblocks of 70/30 and 50/50 1,4-to-1,2 ratios remain as single chains and ill-defined aggregates, respectively, when dissolved in THF. With inferences drawn from simple structural models, we speculate that this self-assembly behavior arises due to the change in the chain configuration with increasing content of 1,2-links in the backbone. This renders the chain with higher 1,2 content incapable of swelling in response to solvent and unable to pack into well-defined self-assembled structures.

Morphologies of ABC triblock terpolymer melts containing poly(cyclohexadiene): effects of conformational asymmetry.

We have synthesized linear ABC triblock terpolymers containing poly(1,3-cyclohexadiene), PCHD, as an end block and characterized their morphologies in the melt. Specifically, we have studied terpolymers containing polystyrene (PS), polybutadiene (PB), and polyisoprene (PI) as the other blocks. Systematically varying the ratio of 1,2- /1,4-microstructures of poly(1,3-cyclohexadiene), we have studied the effects of conformational asymmetry among the three blocks on the morphologies using transmission electron microscopy (TEM), small-angle X-ray scattering (SAXS), and self-consistent field theory (SCFT) performed with PolySwift++. Our work reveals that the triblock terpolymer melts containing a high percentage of 1,2-microstructures in the PCHD block are disordered at 110 °C for all the samples, independent of sequence and volume fraction of the blocks. In contrast, the triblock terpolymer melts containing a high percentage of 1,4-microstructure form regular morphologies known from the literature. The accuracy of the SCFT calculations depends on calculating the χ parameters that quantify the repulsive interactions between different monomers. Simulations using χ values obtained from solubility parameters and group contribution methods are unable to reproduce the morphologies as seen in the experiments. However, SCFT calculations accounting for the enhancement of the χ parameter with an increase in the conformational asymmetry lead to an excellent agreement between theory and experiments. These results highlight the importance of conformational asymmetry in tuning the χ parameter and, in turn, morphologies in block copolymers.

Obesity and inflammation influence pharmacokinetic profiles of PEG-based nanoparticles.

Most patients that will be treated with soft nanoparticles (NPs) will be obese. Yet, NP testing, which begins with pharmacokinetic (PK) and toxicity studies, is carried out almost exclusively in lean rodents having healthy livers and low inflammation. To address this knowledge gap, we determined the PK and toxicity of tail-vein-injected, PEG-based cylindrical nanoparticles (CNPs) and PEGylated liposomes (PLs) as a function of obesity, liver health, and inflammation in leptin-deficient ob/ob and wild-type C57BL/6 J mice. CNPs localized faster to obese livers than to healthy livers within 24 h of injection. PLs localized faster to obese livers than to healthy livers but only 30 min post-injection. Afterwards PL localization to lean livers was higher than localization to obese livers. Overall, PL liver signal peaked ∼6 h post-injection in lean mice, ∼24 h post-injection in heavy mice, and âˆ¼ 48 h post-injection in obese mice. CNPs and PLs were non-toxic to mouse livers as assessed by histology; they reduced many cytokine and chemokine levels that were elevated by obesity. Liver macrophage depletion reduced CNP and PL liver localization as expected; liver sinusoidal endothelial cell (LSEC) depletion reduced PL liver localization but surprisingly increased CNP liver localization. The intensity of RAW264.7 macrophages was higher after CNP incubations than with PL incubations; conversely, the intensity of LSECs was higher after PL incubations than with CNP incubations. This shows the potential for key differences in NP-liver interactions. Triggering inflammation by administering lipopolysaccharide (LPS) to mice increased CNP liver localization but decreased PL liver localization. The results show that obesity and inflammation in a mouse model and in vitro affect soft PEG-based NP interaction with macrophages and LSECs, but also that these NPs can reduce pro-inflammatory pathways increased by obesity.

Carbon nanofibers based carbon-carbon composite fibers.

Textile grade polyacrylonitrile (PAN) was used as a precursor material for carbon fiber preparation. E-beam irradiated polyacrylonitrile grafted carbon nanofibers were dispersed in polyacrylonitrile solution (dissolved in dimethyl formamide). Carbon nanofibers (CNF) infused polyacrylonitrile solution was wet spun on a lab-scale wet-spinning setup to form 50 to 70 µm diameter fibers with 3.2 wt.% CNF-PAN, 6.4 wt.% CNF-PAN, and neat PAN. Precursor fibers were characterized for thermal, mechanical and morphological properties using various techniques. Drawing the precursor fibers further enhanced polymer chain orientation and coalesced the voids, enhancing tensile strength and modulus by more than 150% compared to those of the undrawn fibers. Precursor composite fibers on carbonization showed enhanced strength, compared to that of pristine PAN fibers, by four times and stiffness by 14 times. The carbon-carbon composite fibers were further characterized with SEM/FIB, XRD and tensile strength. The property improvements were dependent on the uniform distribution of carbon nanofibers, and surface modification of carbon nanofibers further enabled their dispersion in the composite fibers. Furthermore, 3.2 wt.% CNFs in PAN fibers showed maximum improvement in properties compared to 6.4 wt.% CNF in PAN fibers, indicating that the property enhancements go through a maximum and then drop off due to challenge in getting uniform distribution of nanofibers.

Decoupling of ionic transport from segmental relaxation in polymer electrolytes.

We present detailed studies of the relationship between ionic conductivity and segmental relaxation in polymer electrolytes. The analysis shows that the ionic conductivity can be decoupled from segmental dynamics and the strength of the decoupling correlates with the fragility but not with the glass transition temperature. These results call for a revision of the current picture of ionic transport in polymer electrolytes. We relate the observed decoupling phenomenon to frustration in packing of rigid polymers, where the loose local structure is also responsible for the increase in their fragility.

Architecture- and Composition-Controlled Self-Assembly of Block Copolymers and Binary Mixtures With Crosslinkable Components: Chain Exchange Between Block Copolymer Nanoparticles.

Chain exchange behaviors in self-assembled block copolymer (BCP) nanoparticles (NPs) at room temperature are investigated through observations of structural differences between parent and binary systems of BCP NPs with and without crosslinked domains. Pairs of linear diblock or triblock, and branched star-like polystyrene-poly(2-vinylpyridine) (PS-PVP) copolymers that self-assemble in a PVP-selective mixed solvent into BCP NPs with definite differences in size and self-assembled morphology are combined by diverse mixing protocols and at different crosslinking densities to reveal the impact of chain exchange between BCP NPs. Clear structural evolution is observed by dynamic light scattering and AFM and TEM imaging, especially in a blend of triblock + star copolymer BCP NPs. The changes are ascribed to the chain motion inherent in the dynamic equilibrium, which drives the system to a new structure, even at room temperature. Chemical crosslinking of PVP corona blocks suppresses chain exchange between the BCP NPs and freezes the nanostructures at a copolymer crosslinking density (CLD) of ∼9%. This investigation of chain exchange behaviors in BCP NPs having architectural and compositional complexity and the ability to moderate chain motion through tailoring the CLD is expected to be valuable for understanding the dynamic nature of BCP self-assemblies and diversifying the self-assembled structures adopted by these systems. These efforts may guide the rational construction of novel polymer NPs for potential use, for example, as drug delivery platforms and nanoreactors.

Polypeptide grafted hyaluronan: A self-assembling comb-branched polymer constructed from biological components.

Rheological evidence is provided demonstrating that covalent grafting of monodisperse isotactic poly(L-leucine) branches onto linear hyaluronan (HA) polysaccharide chains yields comb-branched HA chains that self-assemble into long-lived physical networks in aqueous solutions driven by hydrophobic interactions between poly(L-leucine) chains. This is in stark contrast to native (unmodified) HA solutions which exhibit no tendency to form long-lived physical networks.

Elongated PEO-based nanoparticles bind the high-density lipoprotein (HDL) receptor scavenger receptor class B I (SR-BI).

Targeting cell-surface receptors with nanoparticles (NPs) is a crucial aspect of nanomedicine. Here, we show that soft, flexible, elongated NPs with poly-ethylene-oxide (PEO) exteriors and poly-butadiene (PBD) interiors - PEO-PBD filomicelles - interact directly with the major high-density lipoprotein (HDL) receptor and SARS-CoV-2 uptake factor, SR-BI. Filomicelles have a ~ 6-fold stronger interaction with reconstituted SR-BI than PEO-PBD spheres. HDL, and the lipid transport inhibitor, BLT-1, both block the uptake of filomicelles by macrophages and Idla7 cells, the latter are constitutively expressing SR-BI (Idla7-SR-BI). Co-injections of HDL and filomicelles into wild-type mice reduced filomicelle signal in the liver and increased filomicelle plasma levels. The same was true with SCARB1-/- mice. SR-BI binding is followed by phagocytosis for filomicelle macrophage entry, but only SR-BI is needed for entry into Idla7-SR-BI cells. PEO-PBD spheres did not interact strongly with SR-BI in the above experiments. The results show elongated PEO-based NPs can bind cells via cooperativity among SR-BI receptors on cell surfaces.

Polymer loop formation on a functionalized hard surface: quantitative insight by comparison of experimental and Monte Carlo simulation results.

Polystyrene terminated with carboxylic acid end groups (telechelic polymer) was grafted from the melt onto a silicon wafer that contained a monolayer of epoxy groups. Ellipsometry and fluorimetry were employed to monitor the kinetics of the grafting and loop formation, respectively. These results are quantitatively correlated with bond fluctuation Monte Carlo (BFMC) simulations that model the grafting and loop formation process. The quantitative correlation found between experiment and simulation provides unique insight into the process of polymer loop formation. Specifically, this correlation provides a calibration of the fluorescence intensity to the amount of singly bound chains present on the surface, revealing that about 80% of the bound chains form loops on the surface at the longest reaction time studied, and provides the time evolution of singly and doubly bound chains during the reaction. Moreover, this correlation is broadly applicable and can be used to readily monitor the impact of a broad range of reaction conditions (e.g., temperature, telechelic concentration, surface density of functional groups) on the loop formation process. This correlation, therefore, provides a method to access fundamental information that is not accessible by experiment alone and yet is required to tailor surface properties through adjusting the coverage and fraction of loops in the grafted layer and to correlate surface-sensitive properties to specific grafted layer structure.

Polypeptide grafted hyaluronan: synthesis and characterization.

Poly(l-leucine) grafted hyaluronan (HA-g-PLeu) has been synthesized via a Michael addition reaction between primary amine terminated poly(l-leucine) and acrylate-functionalized HA (TBAHA-acrylate). The precursor hyaluronan was first functionalized with acrylate groups by reaction with acryloyl chloride in the presence of triethylamine in N,N-dimethylformamide. (1)H NMR analysis of the resulting product indicated that an increase in the concentration of acryloylchoride with respect to hydroxyl groups on HA has only a moderate effect on functionalization efficiency, f. A precise control of stoichiometry was not achieved, which could be attributed to partial solubility of intermolecular aggregates and the hygroscopic nature of HA. Michael addition at high [PLeu-NH(2)]/[acrylate](TBAHA) ratios gave a molar grafting ratio of only 0.20 with respect to the repeat unit of HA, indicating grafting limitation due to insolubility of the grafted HA-g-PLeu. Soluble HA-g-PLeu graft copolymers were obtained for low grafting ratios (<0.039) with <8.6% by mass of PLeu and were characterized thoroughly using light scattering, (1)H NMR, FT-IR, and AFM techniques. Light scattering experiments showed a strong hydrophobic interaction between PLeu chains, resulting in aggregates with segregated nongrafted HA segments. This yields local networks of aggregates, as demonstrated by atomic force microscopy. Circular dichroism spectroscopy showed a ß-sheet conformation for aggregates of poly(l-leucine).

Micellization coupled with facilitation of J-aggregation for poly(1,3-cyclohexadiene)-based amphiphilic block copolymers.

Amphiphilic PS-b-sPCHD copolymers can associate to form micelles with PS blocks as the core surrounded by sPHCD blocks in aqueous media. J-Aggregation of the chromophores in sPCHD blocks is significantly facilitated by the micellization, resulting in a remarkable change in the photophysical properties of PS-b-sPCHD.

Single-step process to improve the mechanical properties of carbon nanotube yarn.

Carbon nanotube (CNT) yarns exhibit low tensile strength compared to conventional high-performance carbon fibers due to the facile sliding of CNTs past one another. Electron beam (e-beam) irradiation was employed for in a single-step surface modification of CNTs to improve the mechanical properties of this material. To this end, CNT yarns were simultaneously functionalized and crosslinked using acrylic acid (AA) and acrylonitrile (AN) in an e-beam irradiation process. The chemical modification of CNT yarns was confirmed by X-ray photoelectron spectroscopy (XPS), Raman spectroscopy and scanning electron microscopy (SEM). The best improvement in mechanical properties was achieved on a sample treated with an aqueous solution of AA and subsequent irradiation. CNT yarn treatment with AA enhanced the strength (444.5 ± 68.4 MPa) by more than 75% and the modulus (21.5 ± 0.6 GPa) by more than 144% as compared to untreated CNT yarn (strength 251 ± 26.5 MPa and modulus 8.8 ± 1.2 GPa).

Design, synthesis, and characterization of lightly sulfonated multigraft acrylate-based copolymer superelastomers.

Multigraft copolymer superelastomers consisting of a poly(n-butyl acrylate) backbone and polystyrene side chains were synthesized and the viscoelastic properties of the non-sulfonated and sulfonated final materials were investigated using extensional rheology (SER3). The non-linear viscoelastic experiments revealed significantly increased true stresses (up to 10 times higher) after sulfonating only 2-3% of the copolymer while the materials maintained high elongation (<700%). The linear viscoelastic experiments showed that the storage and loss modulus are increased by sulfonation and that the copolymers can be readily tuned and further improved by increasing the number of branching points and the molecular weight of the backbone. In this way, we show that by tuning not only the molecular characteristics of the multigraft copolymers but also their architecture and chemical interaction, we can acquire thermoplastic superelastomer materials with desired viscoelastic properties.

Grafting reactions of living macroanions with multi-walled carbon nanotubes.

Grafting reactions of living polystyryllithium (PSLi) with acid chloride containing multi-walled carbon nanotubes (MWNTs-COCI) were performed under vacuum in benzene at room temperature. Covalent grafting of polystyrene (PS) was characterized using spectroscopic, microscopic, and thermogravimetric analyses. Grafting at different ratios of macroanion to acylchloride of the carbon nanotubes showed that the grafting efficiency was not dependent on the concentration of the macroanions. The mole percent of PS present in the MWNTs-g-PS samples was inversely proportional to the precursor molecular weight of PSLi. Direct reactions of PSLi, polybutadienyllithium and n-butyllithium with pristine MWNTs without any functional groups were also performed in the presence and in the absence of tetrahydrofuran in benzene. The grafting reactions of living macroanions either with MWNTs-COCl or with pristine MWNTs indicated a partial grafting of polymer on the carbon nanotubes in benzene at room temperature.

Block Copolymers: Synthesis, Self-Assembly, and Applications.

Research on block copolymers (BCPs) has played a critical role in the development of polymer chemistry, with numerous pivotal contributions that have advanced our ability to prepare, characterize, theoretically model, and technologically exploit this class of materials in a myriad of ways in the fields of chemistry, physics, material sciences, and biological and medical sciences. The breathtaking progress has been driven by the advancement in experimental techniques enabling the synthesis and characterization of a wide range of block copolymers with tailored composition, architectures, and properties. In this review, we briefly discussed the recent progress in BCP synthesis, followed by a discussion of the fundamentals of self-assembly of BCPs along with their applications.

Influence of Chain Rigidity and Dielectric Constant on the Glass Transition Temperature in Polymerized Ionic Liquids.

Polymerized ionic liquids (PolyILs) are promising candidates for a wide range of technological applications due to their single ion conductivity and good mechanical properties. Tuning the glass transition temperature (Tg) in these materials constitutes a major strategy to improve room temperature conductivity while controlling their mechanical properties. In this work, we show experimental and simulation results demonstrating that in these materials Tg does not follow a universal scaling behavior with the volume of the structural units Vm (including monomer and counterion). Instead, Tg is significantly influenced by the chain flexibility and polymer dielectric constant. We propose a simplified empirical model that includes the electrostatic interactions and chain flexibility to describe Tg in PolyILs. Our model enables design of new functional PolyILs with the desired Tg.