Enhanced computed tomography radiomics predicts solute carrier family 7, member 11 in head and neck squamous cell carcinoma.

Introduction: Traditional prognostic indicators for head and neck squamous cell carcinoma (HNSCC), such as clinicopathological features, human papillomavirus status, and imaging examinations, often lack precision in guiding medical therapy. Therefore, discovering novel tumor biomarkers that can accurately assess prognosis and aid in personalized medical treatment for HNSCC is critical. Solute carrier family 7, member 11 (SLC7A11), is implicated in ferroptosis, and various malignant tumor therapies regulate its expression. However, the mechanisms regulating SLC7A11 expression, the transporter activity, and its specific role in controlling ferroptosis in cancer cells remain unknown. Thus, in this study, we aimed to develop an improved computed tomography (CT) radiomics model that could predict SLC7A11 expression in patients with HNSCC. Methods: We used patient genomic data and corresponding augmented CT images for prognostic analysis and building models. Further, we investigated the potential molecular mechanisms underlying SLC7A11 expression in the immune microenvironment. Our radiomics model successfully predicted SLC7A11 mRNA expression in HNSCC tissues and elucidated its association with relevant genes and prognostic outcomes. Results: SLC7A11 expression level was high within tumor tissues and was connected to the infiltration of eosinophil, CD8+ T-cell, and macrophages, which was associated with poor overall survival. Our models demonstrated robust predictive power. The distribution of radiomics scores (RAD scores) within the training and validation sets was markedly different between the high- and low-expression groups of SLC7A11. Conclusion: SLC7A11 is likely an important factor in the prognosis of HNSCC. SLC7A11 expression can be predicted effectively and reliably by radiomics models based on enhanced CT.

Delivery of Yersinia pestis antigens via Escherichia coli outer membrane vesicles offered improved protection against plague.

Outer membrane vesicles (OMVs) from Gram-negative bacteria can be used as a vaccine platform to deliver heterologous antigens. Here, the major protective antigens of Yersinia pestis, F1 and LcrV, were fused either with the leader sequence or the transmembrane domain of the outer membrane protein A (OmpA), resulting in chimeric proteins OmpA-ls-F1V and OmpA46-159-F1V, respectively. We show that OmpA-ls-F1V and OmpA46-159-F1V can be successfully delivered into the lumen and membrane of the OMVs of Escherichia coli, respectively. Mutation of ompA but not tolR in E. coli enhanced the delivery efficiency of OmpA-ls-F1V into OMVs. The OmpA-ls-F1V protein comprises up to 20% of the total protein in OMVs derived from the ompA mutant (OMVdA-ALS-F1V), a proportion significantly higher than the 1% observed for OmpA46-159-F1V in OMVs produced by an ompA mutant that expresses OmpA46-159-F1V, referred to as OMVdA-LATM5-F1V. Intramuscular (i.m.) immunization of mice with OMVdA-ALS-F1V induced significantly higher levels of serum anti-LcrV and anti-F1 IgG, and provided higher efficacy in protection against subcutaneous (s.c.) Y. pestis infection compared to OMVdA-LATM5-F1V and the purified recombinant F1V (rF1V) protein adsorbed to aluminum hydroxide. The three-dose i.m. immunization with OMVdA-ALS-F1V, administered at 14-day intervals, provides complete protection to mice against s.c. infection with 130 LD50 of Y. pestis 201 and conferred 80% against intranasal (i.n.) challenge with 11.4 LD50 of Y. pestis 201. Taken together, our findings indicate that the engineered OMVs containing F1V fused with the leader sequence of OmpA provide significantly higher protection than rF1V against both s.c. and i.n. infection of Y. pestis and more balanced Th1/Th2 responses.IMPORTANCEThe two major protective antigens of Y. pestis, LcrV and F1, have demonstrated the ability to elicit systemic and local mucosal immune responses as subunit vaccines. However, these vaccines have failed to provide adequate protection against pneumonic plague in African green monkeys. Here, Y. pestis F1 and LcrV antigens were successfully incorporated into the lumen and the surface of the outer membrane vesicles (OMVs) of E. coli by fusion either with the leader sequence or the transmembrane domain of OmpA. We compared the humoral immune response elicited by these OMV formulations and their protective efficacy in mice against Y. pestis. Our results demonstrate that the plague OMV vaccine candidates can induce robust protective immunity against both s.c. and i.n. Y. pestis infections, surpassing the effectiveness of rF1V. In addition, immunization with OMVs generated a relatively balanced Th1/Th2 immune response compared to rF1V immunization. These findings underscore the potential of OMVs-based plague vaccines for further development.

Highly Strong Interface Adhesion of Polyester Fiber Rubber Composite via Fiber Surface Modification by Meta-Cresol/Formaldehyde Latex Dipping Emulsion.

As a skeleton material, polyester (PET) fiber can significantly improve the strength and durability of rubber composites, but the interfacial adhesion between polyester fiber and rubber is poor due to the chemical inertia of PET fiber surface. Resorcinol-formaldehyde-latex (RFL) impregnating solution is usually used to treat PET fibers, but RFL contains toxic components such as resorcinol, which is harmful to the human body. A simple and less toxic resin-impregnating system cresol-formaldehyde-latex (CFL) was obtained by alternating resorcinol with low-toxicity cresol and m-cresol formaldehyde resin was synthesized from m-cresol and formaldehyde. CFL (m-cresol formaldehyde resin latex) systems with different C/F mole ratios and CF resin/latex ratios were adopted to modify the surface of PET fibers. The strip peeling adhesive and the H pull-out test results indicated that the PET fiber/rubber adhesion strength increased with the increase in the formaldehyde dosage and the CF resin content, and the peeling force value and the H-pull-out force of treated PET/rubber composites reached 7.3 N/piece and 56.8 N, respectively. The optimal choice of CFL adhesive system was obtained, when the C/F mole ratio was 1/2 and the CF resin/latex weight ratio was 0.23. This environment-friendly CFL dipping emulsion can be used as a new surface modification strategy as it can remarkably enhance the interfacial adhesion of PET/rubber composites.

The complexes of soybean protein isolate and procyanidin B2 have synergistic hypolipidemic activity at the cellular level by activating the AMPKα pathway.

The alkali method was used to prepare soybean protein isolate (SPI) and procyanidin B2 (PCB2) complexes, and the interaction between SPI and PCB2 was studied using multi-spectroscopic methods. The human hepatoma (HepG2) cell hyperlipidemia model was used to explore whether SPI-PCB2 has the potential for synergistic hypolipidemia. According to the findings, PCB2 was primarily linked to SPI via C-S and C-N bonds, and the addition of PCB2 reduced the α-helix structure content of SPI by 4.1%. At the cellular level, the optimal SPI-PCB2 ratio for lowering blood lipids was 1:1. Compared with the model group, the TG content and TC content in the 1:1 group were reduced by 28.7% and 26.3%, respectively. Western blot analysis revealed that SPI-PCB2 = 1:1 exerted synergistic hypolipidemic activity mainly by activating adenosine monophosphate-activated protein kinase α (AMPKα) phosphorylation, inhibiting 3-hydroxy-3-methylglutaryl CoA reductase (HMGCR) and fatty acid synthetase (FAS) protein expression, and upregulating carnitine palmitoyl transferase 1A (CPT1A) protein activity.

The Protein Composition Changed the Quality Characteristics of Plant-Based Meat Analogues Produced by a Single-Screw Extruder: Four Main Soybean Varieties in China as Representatives.

Plant-based meat analogues (PBMs) are increasingly interesting to customers because of their meat-like quality and contribution to a healthy diet. The single-screw extruder is an important method for processing PBMs, and the characteristics of the product are directly affected by the composition of the raw materials; however, little research focuses on this issue. To explore the effect of protein composition on the quality characteristics of PBMs produced by a single-screw extruder, four soybean varieties used in China (Heihe 43 (HH 43), Jiyu 86 (JY 86), Suinong 52 (SN 52), and Shengfeng 5 (SF 5)) were selected. The 11S/7S ratios for these varieties ranged from 1.0: 1 to 2.5: 1 in order to produce PBMs with different protein compositions. The structure, processing, nutrition, and flavor characteristics were explored to analyze their differences. The results showed that protein composition affected the structure of PBMs, but the correlation was not significant. Meanwhile, a lower 11S/7S ratio (HH 43) did not prove to be a favorable characteristic for the processing of PBMs. From the perspective of nutrition and flavor, it seems acceptable to use a moderate 11S/7S ratio (JY 86 and SN 43) to produce PBMs. This study proved that the protein composition of raw materials affects the characteristics of PBM products produced by a single-screw extruder. To produce PBMs of higher quality, soybeans with a markedly different 11S/7S ratio should not be selected.