RESUMEN
There are two categories of coordination polymers (CPs): inorganic CPs (i-CPs) and organic ligand bridged CPs (o-CPs). Based on the successful crystal engineering of CPs, we here propose noncrystalline states and functionalities as a new research direction for CPs. Control over the liquid or glassy states in materials is essential to obtain specific properties and functions. Several studies suggest the feasibility of obtaining liquid/glassy states in o-CPs by design principles. The combination of metal ions and organic bridging ligands, together with the liquid/glass phase transformation, offer the possibility to transform o-CPs into ionic liquids and other ionic soft materials. Synchrotron measurements and computational approaches contribute to elucidating the structures and dynamics of the liquid/glassy states of o-CPs. This offers the opportunity to tune the porosity, conductivity, transparency, and other material properties. The unique energy landscape of liquid/glass o-CPs offers opportunities for properties and functions that are complementary to those of the crystalline state.
RESUMEN
Single-ligand-based electronically conductive porous coordination polymers/metal-organic frameworks (EC-PCPs/MOFs) fail to meet the requirements of numerous electronic applications owing to their limited tunability in terms of both conductivity and topology. In this study, a new 2D π-conjugated EC-MOF containing copper units with mixed trigonal ligands was developed: Cu3 (HHTP)(THQ) (HHTP=2,3,6,7,10,11-hexahydrotriphenylene, THQ=tetrahydroxy-1,4-quinone). The modulated conductivity (σ≈2.53×10-5 â S cm-1 with an activation energy of 0.30â eV) and high porosity (ca. 441.2â m2 g-1 ) of the Cu3 (HHTP)(THQ) semiconductive nanowires provided an appropriate resistance baseline and highly accessible areas for the development of an excellent chemiresistive gas sensor.
RESUMEN
Oligodiacetylenes (ODAs) with alternating ene-yne conjugated structure are significant materials for optical and electronic properties. Due to the low solubility of ODAs in common solvents, the synthetic approaches are limited. Here we disclose a new synthetic approach of ODAs without a side alkyl chain using a porous coordination polymer (PCP) as a sacrificial template. 1,2-Bis(4-pyridyl)butadiyne, which works as a monomer, was embedded in the flexible framework of the PCP, and ODAs were synthesized via utilization of the anisotropic thermal expansion of the PCP crystal. The oligomeric state of ODAs depends on the metal ion and coligand of the precursor.
RESUMEN
The melting behavior of a coordination polymer (CP) crystal was utilized to achieve enhanced and optically switchable proton conductivity in the solid state. The strong acid molecules (triflic acid) were doped in one-dimensional (1D) CP, [Zn(HPO4 )(H2 PO4 )2 ](ImH2 )2 (ImH2 =monoprotonated imidazole) in the melt state, and overall enhancement in the proton conductivity was obtained. The enhanced proton conductivity is assigned to increased number of mobile protons and defects created by acid doping. Optical control over proton conductivity in the CP is achieved by doping of the photo acid molecule pyranine into the melted CP. The pyranine reversibly generates the mobile acidic protons and local defects in the glassy state of CP resulting in the bulk switchable conductivity mediated by light irradiation. Utilization of CP crystal in liquid state enables to be a novel route to incorporate functional molecules and defects, and it provides a tool to control the bulk properties of the CP material.
RESUMEN
We describe the encapsulation of mobile proton carriers into defect sites in nonporous coordination polymers (CPs). The proton carriers were encapsulated with high mobility and provided high proton conductivity at 150 °C under anhydrous conditions. The high proton conductivity and nonporous nature of the CP allowed its application as an electrolyte in a fuel cell. The defects and mobile proton carriers were investigated using solid-state NMR, XAFS, XRD, and ICP-AES/EA. On the basis of these analyses, we concluded that the defect sites provide space for mobile uncoordinated H3PO4, H2PO4(-), and H2O. These mobile carriers play a key role in expanding the proton-hopping path and promoting the mobility of protons in the coordination framework, leading to high proton conductivity and fuel cell power generation.
RESUMEN
The toxic gas H2 S has recently emerged as one of the important signaling molecules in biological systems. Thus understanding the production, distribution, and mode of action of H2 S in biological system is important, but the fleeting and reactive nature of H2 S makes it a daunting task. Herein we report a biocompatible, nitro-functionalized metal-organic framework as reaction-based fluorescence turn-on probe for fast and selective H2 S detection. The selective turn-on performance of MOF remains unaffected even in presence of competing biomolecules.
Asunto(s)
Colorantes Fluorescentes/química , Sulfuro de Hidrógeno/química , Nitrocompuestos/química , Compuestos Organometálicos/química , FluorescenciaRESUMEN
The development of solid-state proton-conducting materials with high conductivity that operate under both anhydrous and humidified conditions is currently of great interest in fuel-cell technology. A 3Dâ metal-organic framework (MOF) with acid-base pairs in its coordination space that efficiently conducts protons under both anhydrous and humid conditions has now been developed. The anhydrous proton conductivity for this MOF is among the highest values that have been reported for MOF materials, whereas its water-assisted proton conductivity is comparable to that of the organic polymer Nafion, which is currently used for practical applications. Unlike other MOFs, which conduct protons either under anhydrous or humid conditions, this compound should represent a considerable advance in the development of efficient solid-state proton-conducting materials that work under both anhydrous and humid conditions.
RESUMEN
On the move: Two isostructural, homochiral Cu(II) coordination frameworks based on amino acids (D- and L-PGA) were synthesized. Dynamic behavior by solid-state structural transformation in single-crystal-to-single-crystal fashion was demonstrated. The extent of structural dynamism was shown by guest inclusion studies. Reversible sol-gel formation and anion-tuning morphology of the compounds is also discussed.
Asunto(s)
Aminoácidos/química , Compuestos Organometálicos/química , Adsorción , Cobre/química , Cristalización , Nanofibras/química , Polímeros/químicaRESUMEN
A three-dimensional biporous soft porous coordination polymer containing active coordination space, made of cadmium(II) and a tripodal carboxylate ligand bearing ether linkages, was synthesized and characterized. Guest-dependent dynamic activities in the active coordination space of the soft porous crystal have been explored. We have demonstrated controlled chemical blocking and unblocking of active pores of the dynamic framework along with guest-dependent contraction and expansion of the channels by single-crystal-to-single-crystal structural transformation studies. Detailed studies revealed up to 70% contraction of the void volume and almost a 100 times increase in gas sorption by controlled phases obtained by guest switching. These types of soft materials with porous scaffolds, also known as soft porous crystals, may have general implications in the preparation of intelligent host materials with zeolitic properties and enzyme-like specificity.
RESUMEN
A robust and water-stable porous coordination polymer [Cd(NDC)(0.5)(PCA)]·G(x) (1) (H(2)NDC = 2,6-napthalenedicarboxylic acid, HPCA = 4-pyridinecarboxylic acid, G = guest molecules) with new network topology has been synthesized solvothermally. The framework is 3D porous material and forms a 1D channel along the c-axis, with the channel dimensions ~9.48 × 7.83 Å(2). The compound has high selectivity in uptake of CO(2) over other gases (H(2), O(2), Ar, N(2), and CH(4)). The framework is highly stable in presence of water vapor even at 60 °C. The high CO(2) selectivity over other gases and water stability makes the compound promising candidate for industrial postcombustion gas separation application.
RESUMEN
A bistable dynamic coordination polymer [Ni(pca)(bdc)(0.5)(H(2)O)(2)] having a two-dimensional (2D) zigzag sheet structure is synthesized solvothermally. Topological analysis revealed that the frameworks have an hcb type of uninodal net. The compound exhibits guest specific reversible structural transformations accompanying reversible changes in physical properties driven by inherent flexibility and transformability.
RESUMEN
High proton conducting electrolytes with mechanical moldability are a key material for energy devices. We propose an approach for creating a coordination polymer (CP) glass from a protic ionic liquid for a solid-state anhydrous proton conductor. A protic ionic liquid (dema)(H2PO4), with components which also act as bridging ligands, was applied to construct a CP glass (dema)0.35[Zn(H2PO4)2.35(H3PO4)0.65]. The structural analysis revealed that large Zn-H2PO4 -/H3PO4 coordination networks formed in the CP glass. The network formation results in enhancement of the properties of proton conductivity and viscoelasticity. High anhydrous proton conductivity (σ = 13.3 mS cm-1 at 120 °C) and a high transport number of the proton (0.94) were achieved by the coordination networks. A fuel cell with this CP glass membrane exhibits a high open-circuit voltage and power density (0.15 W cm-2) under dry conditions at 120 °C due to the conducting properties and mechanical properties of the CP glass.
RESUMEN
Crystal melting and glass formation of coordination polymers (CPs) and metal-organic frameworks (MOFs) are rare thermal events. To expand the library of melting CP/MOFs, we utilized anti-crystal engineering in ionic liquids to construct CPs. A combination of Cu+ and 4,4'-bipyridin-1-ium derivatives afforded four melting CPs showing stable liquid and glassy states.
RESUMEN
A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has been fixed in the paper.
RESUMEN
We design the Janus-like interlayer with two different functional faces for suppressing the shuttle of soluble lithium polysulfides (LPSs) in lithium-sulfur batteries (LSBs). At the front face, the conductive functionalized carbon fiber paper (f-CFP) having oxygen-containing groups i.e., -OH and -COOH on its surface was placed face to face with the sulfur cathode serving as the first barrier accommodating the volume expansion during cycling process and the oxygen-containing groups can also adsorb the soluble LPSs via lithium bonds. At the back face, a crystalline coordination network of [Zn(H2PO4)2(TzH)2]n (ZnPTz) was coated on the back side of f-CFP serving as the second barrier retarding the left LPSs passing through the front face via both physical confinement and chemical adsorption (i.e. Li bonding). The LSB using the Janus-like interlayer exhibits a high reversible discharge capacity of 1,416 mAh g-1 at 0.1C with a low capacity fading of 0.05% per cycle, 92% capacity retention after 200 cycles and ca. 100% coulombic efficiency. The fully charged LSB cell can practically supply electricity to a spinning motor with a nominal voltage of 3.0 V for 28 min demonstrating many potential applications.
RESUMEN
A proton-conducting coordination polymer of anionic one-dimensional (1D) chains of Zn2+ phosphate and protonated imidazole with the formula of [Zn(HPO4)(H2PO4)2](ImH2)2 has been used as a novel supercapacitor material in aqueous electrolytes. This material stores charges via a proton-hopping mechanism.
RESUMEN
A chemically stable cationic MOF encapsulating an in situ formed water-hydroxide supramolecular anionic chain is realized for high hydroxide (OH(-)) ion conductivity in the solid-state (Type A). High OH(-) ion conductivity and low activation energy of the MOF demonstrate the advantage of the in situ incorporation of OH(-) ions to achieve efficient OH(-) ion conduction in the solid-state.
RESUMEN
Redox-active pyrrole (Py) monomers were intercalated into 1D nanochannels of [Cd(NDC)0.5(PCA)]·Gx (H2NDC = 2,6-napthalenedicarboxylic acid, HPCA = 4-pyridinecarboxylic acid, G = guest molecules) (1) - a fluorescent 3D MOF (λem = 385 nm). Subsequent activation of 1âPy upon immersing into iodine (I2) solution resulted in an increment of the bulk electrical conductivity by â¼9 orders of magnitude. The unusual increase in conductivity was attributed to the formation of highly oriented and conducting polypyrrole (PPy) chains inside 1D nanochannels and specific host-guest interaction in 1âPPy thereof. The Hall-effect measurements suggested 1âPPy to be an n-type semiconductor material with remarkably high-carrier density (η) of â¼1.5 × 10(17) cm(-3) and mobility (µ) of â¼8.15 cm(2) V(-1) s(-1). The fluorescence property of 1 was almost retained in 1âPPy with concomitant exciplex-type emission at higher wavelength (λem = 520 nm). The here-presented results on [MOFâConducting Polymer] systems in general will serve as a prototype experiment toward rational design for the development of highly conductive yet fluorescent MOF-based materials for various optoelectronic applications.