RESUMEN
The electrocatalytic reduction of carbon dioxide, powered by renewable electricity, to produce valuable fuels and feedstocks provides a sustainable and carbon-neutral approach to the storage of energy produced by intermittent renewable sources1. However, the highly selective generation of economically desirable products such as ethylene from the carbon dioxide reduction reaction (CO2RR) remains a challenge2. Tuning the stabilities of intermediates to favour a desired reaction pathway can improve selectivity3-5, and this has recently been explored for the reaction on copper by controlling morphology6, grain boundaries7, facets8, oxidation state9 and dopants10. Unfortunately, the Faradaic efficiency for ethylene is still low in neutral media (60 per cent at a partial current density of 7 milliamperes per square centimetre in the best catalyst reported so far9), resulting in a low energy efficiency. Here we present a molecular tuning strategy-the functionalization of the surface of electrocatalysts with organic molecules-that stabilizes intermediates for more selective CO2RR to ethylene. Using electrochemical, operando/in situ spectroscopic and computational studies, we investigate the influence of a library of molecules, derived by electro-dimerization of arylpyridiniums11, adsorbed on copper. We find that the adhered molecules improve the stabilization of an 'atop-bound' CO intermediate (that is, an intermediate bound to a single copper atom), thereby favouring further reduction to ethylene. As a result of this strategy, we report the CO2RR to ethylene with a Faradaic efficiency of 72 per cent at a partial current density of 230 milliamperes per square centimetre in a liquid-electrolyte flow cell in a neutral medium. We report stable ethylene electrosynthesis for 190 hours in a system based on a membrane-electrode assembly that provides a full-cell energy efficiency of 20 per cent. We anticipate that this may be generalized to enable molecular strategies to complement heterogeneous catalysts by stabilizing intermediates through local molecular tuning.
RESUMEN
Fabricating nanoscale metal carbides is a great challenge due to them having higher Gibbs free energy of formation (ΔG°) values than other metal compounds; additionally, these carbides have harsh calcination conditions, in which metal oxidation is preferred in the atmosphere. Herein, we report oxocarbon-mediated calcination for the predictive synthesis of nanoscale metal carbides. The thermochemical oxocarbon equilibrium of CO-CO2 reactions was utilized to control the selective redox reactions in multiatomic systems of Mo-C-O, contributing to the phase-forming and structuring of Mo compounds. By harnessing the thermodynamically predicted processing window, we controlled a wide range of Mo phases (MoO2, α-MoC1-x, and ß-Mo2C) and nanostructures (nanoparticle, spike, stain, and core/shell) in the Mo compounds/C nanofibers. By inducing simultaneous reactions of C-O (selective C combustion) and Mo-C (Mo carbide formation) in the nanofibers, Mo diffusion was controlled in C nanofibers, acting as a template for the nucleation and growth of Mo carbides and resulting in precise control of the phases and structures of Mo compounds. The formation mechanism of nanostructured Mo carbides was elucidated according to the CO fractions of CO-CO2 calcination. Moreover, tungsten (W) and niobium (Nb) carbides/C nanofibers have been successfully synthesized by CO-CO2 calcination. We constructed the thermodynamic map for the predictive synthesis of transition metal carbides to provide universal guideline via thermochemical oxocarbon equilibrium. We revealed that our thermochemical oxocarbon-mediated gas-solid reaction enabled the structure and phase control of nanoscale transition metal compounds to optimize the material-property relationship accordingly.
RESUMEN
The electrocatalytic carbon dioxide reduction reaction (CO2RR) addresses the need for storage of renewable energy in valuable carbon-based fuels and feedstocks, yet challenges remain in the improvement of electrosynthesis pathways for highly selective hydrocarbon production. To improve catalysis further, it is of increasing interest to lever synergies between heterogeneous and homogeneous approaches. Organic molecules or metal complexes adjacent to heterogeneous active sites provide additional binding interactions that may tune the stability of intermediates, improving catalytic performance by increasing Faradaic efficiency (product selectivity), as well as decreasing overpotential. We offer a forward-looking perspective on molecularly enhanced heterogeneous catalysis for CO2RR. We discuss four categories of molecularly enhanced strategies: molecular-additive-modified heterogeneous catalysts, immobilized organometallic complex catalysts, reticular catalysts and metal-free polymer catalysts. We introduce present-day challenges in molecular strategies and describe a vision for CO2RR electrocatalysis towards multi-carbon products. These strategies provide potential avenues to address the challenges of catalyst activity, selectivity and stability in the further development of CO2RR.
RESUMEN
In the electrochemical CO2 reduction reaction (CO2RR), control over the binding of intermediates is key for tuning product selectivity and catalytic activity. Here we report the use of reticular chemistry to control the binding of CO2RR intermediates on metal catalysts encapsulated inside metal-organic frameworks (MOFs), thereby allowing us to improve CO2RR electrocatalysis. By varying systematically both the organic linker and the metal node in a face-centered cubic (fcu) MOF, we tune the adsorption of CO2, pore openness, and Lewis acidity of the MOFs. Using operando X-ray absorption spectroscopy (XAS) and in situ Raman spectroscopy, we reveal that the MOFs are stable under operating conditions and that this tuning plays the role of optimizing the *CO binding mode on the surface of Ag nanoparticles incorporated inside the MOFs with the increase of local CO2 concentration. As a result, we improve the CO selectivity from 74% for Ag/Zr-fcu-MOF-1,4-benzenedicarboxylic acid (BDC) to 94% for Ag/Zr-fcu-MOF-1,4-naphthalenedicarboxylic acid (NDC). The work offers a further avenue to utilize MOFs in the pursuit of materials design for CO2RR.
RESUMEN
The electroreduction of carbon dioxide (CO2RR) to valuable chemicals is a promising avenue for the storage of intermittent renewable electricity. Renewable methane, obtained via CO2RR using renewable electricity as energy input, has the potential to serve as a carbon-neutral fuel or chemical feedstock, and it is of particular interest in view of the well-established infrastructure for its storage, distribution, and utilization. However, CO2RR to methane still suffers from low selectivity at commercially relevant current densities (>100 mA cm-2). Density functional theory calculations herein reveal that lowering *CO2 coverage on the Cu surface decreases the coverage of the *CO intermediate, and then this favors the protonation of *CO to *CHO, a key intermediate for methane generation, compared to the competing step, C-C coupling. We therefore pursue an experimental strategy wherein we control local CO2 availability on a Cu catalyst by tuning the concentration of CO2 in the gas stream and regulate the reaction rate through the current density. We achieve as a result a methane Faradaic efficiency (FE) of (48 ± 2)% with a partial current density of (108 ± 5) mA cm-2 and a methane cathodic energy efficiency of 20% using a dilute CO2 gas stream. We report stable methane electrosynthesis for 22 h. These findings offer routes to produce methane with high FE and high conversion rate in CO2RR and also make direct use of dilute CO2 feedstocks.
RESUMEN
Electrochemical conversion of nitrate (NO3-) into ammonia (NH3) recycles nitrogen and offers a route to the production of NH3, which is more valuable than dinitrogen gas. However, today's development of NO3- electroreduction remains hindered by the lack of a mechanistic picture of how catalyst structure may be tuned to enhance catalytic activity. Here we demonstrate enhanced NO3- reduction reaction (NO3-RR) performance on Cu50Ni50 alloy catalysts, including a 0.12 V upshift in the half-wave potential and a 6-fold increase in activity compared to those obtained with pure Cu at 0 V vs reversible hydrogen electrode (RHE). Ni alloying enables tuning of the Cu d-band center and modulates the adsorption energies of intermediates such as *NO3-, *NO2, and *NH2. Using density functional theory calculations, we identify a NO3-RR-to-NH3 pathway and offer an adsorption energy-activity relationship for the CuNi alloy system. This correlation between catalyst electronic structure and NO3-RR activity offers a design platform for further development of NO3-RR catalysts.
RESUMEN
Controlled phase conversion in polymorphic transition metal dichalcogenides (TMDs) provides a new synthetic route for realizing tunable nanomaterials. Most conversion methods from the stable 2H to metastable 1T phase are limited to kinetically slow cation insertion into atomically thin layered TMDs for charge transfer from intercalated ions. Here, we report that anion extraction by the selective reaction between carbon monoxide (CO) and chalcogen atoms enables predictive and scalable TMD polymorph control. Sulfur vacancy, induced by anion extraction, is a key factor in molybdenum disulfide (MoS2) polymorph conversion without cation insertion. Thermodynamic MoS2-CO-CO2 ternary phase diagram offers a processing window for efficient sulfur vacancy formation with precisely controlled MoS2 structures from single layer to multilayer. To utilize our efficient phase conversion, we synthesize vertically stacked 1T-MoS2 layers in carbon nanofibers, which exhibit highly efficient hydrogen evolution reaction catalytic activity. Anion extraction induces the polymorph conversion of tungsten disulfide (WS2) from 2H to 1T. This reveals that our method can be utilized as a general polymorph control platform. The versatility of the gas-solid reaction-based polymorphic control will enable the engineering of metastable phases in 2D TMDs for further applications.
RESUMEN
The electrochemical reduction of CO2 has seen many record-setting advances in C2 productivity in recent years. However, the selectivity for ethanol, a globally significant commodity chemical, is still low compared to the selectivity for products such as ethylene. Here we introduce diverse binding sites to a Cu catalyst, an approach that destabilizes the ethylene reaction intermediates and thereby promotes ethanol production. We develop a bimetallic Ag/Cu catalyst that implements the proposed design toward an improved ethanol catalyst. It achieves a record Faradaic efficiency of 41% toward ethanol at 250 mA/cm2 and -0.67 V vs RHE, leading to a cathodic-side (half-cell) energy efficiency of 24.7%. The new catalysts exhibit an in situ Raman spectrum, in the region associated with CO stretching, that is much broader than that of pure Cu controls, a finding we account for via the diversity of binding configurations. This physical picture, involving multisite binding, accounts for the enhanced ethanol production for bimetallic catalysts, and presents a framework to design multimetallic catalysts to control reaction paths in CO2 reductions toward desired products.
RESUMEN
Colloidal quantum dots (CQDs) are promising solution-processed infrared-absorbing materials for optoelectronics. In these applications, it is crucial to replace the electrically insulating ligands used in synthesis to form strongly coupled quantum dot solids. Recently, solution-phase ligand-exchange strategies have been reported that minimize the density of defects and the polydispersity of CQDs; however, we find herein that the new ligands exhibit insufficient chemical reactivity to remove original oleic acid ligands completely. This leads to low CQD packing and correspondingly low electronic performance. Here we report an acid-assisted solution-phase ligand-exchange strategy that, by enabling efficient removal of the original ligands, enables the synthesis of densified CQD arrays. Our use of hydroiodic acid simultaneously facilitates high CQD packing via proton donation and CQD passivation through iodine. We demonstrate highly packed CQD films with a 2.5 times increased carrier mobility compared with prior exchanges. The resulting devices achieve the highest infrared photon-to-electron conversion efficiencies (>50%) reported in the spectral range of 0.8 to 1.1 eV.
RESUMEN
The electrochemical carbon dioxide reduction reaction (CO2RR) produces diverse chemical species. Cu clusters with a judiciously controlled surface coordination number (CN) provide active sites that simultaneously optimize selectivity, activity, and efficiency for CO2RR. Here we report a strategy involving metal-organic framework (MOF)-regulated Cu cluster formation that shifts CO2 electroreduction toward multiple-carbon product generation. Specifically, we promoted undercoordinated sites during the formation of Cu clusters by controlling the structure of the Cu dimer, the precursor for Cu clusters. We distorted the symmetric paddle-wheel Cu dimer secondary building block of HKUST-1 to an asymmetric motif by separating adjacent benzene tricarboxylate moieties using thermal treatment. By varying materials processing conditions, we modulated the asymmetric local atomic structure, oxidation state and bonding strain of Cu dimers. Using electron paramagnetic resonance (EPR) and in situ X-ray absorption spectroscopy (XAS) experiments, we observed the formation of Cu clusters with low CN from distorted Cu dimers in HKUST-1 during CO2 electroreduction. These exhibited 45% C2H4 faradaic efficiency (FE), a record for MOF-derived Cu cluster catalysts. A structure-activity relationship was established wherein the tuning of the Cu-Cu CN in Cu clusters determines the CO2RR selectivity.
RESUMEN
BaTiO3/Cu2O and BaTiO3/Cu2O/Au complexes were prepared from CuCl2, HAuCl4 solution, and BaTiO3 by the solution method. BaTiO3 particles were dispersed in a CuCl2 solution, and the BaTiO3/CuO complex was produced through crystallization of CuO onto the BaTiO3 surface by hydrolysis of CuCl2 in the first stage. After the reaction, CuO was reduced to Cu2O by treatment with glucose, thereby yielding the BaTiO3/Cu2O complex. The BaTiO3/Cu2O/Au complex was prepared by treating the BaTiO3/Cu2O particles with HAuCl4. Under visible light, the obtained BaTiO3/Cu2O0/Au complex showed higher photocatalytic activity than the Degussa P-25sample. In addition, the BaTiO3/Cu2O complex showed excellent antipathogenic effect.
Asunto(s)
Aspergillus nidulans/efectos de los fármacos , Nanopartículas del Metal/administración & dosificación , Nanopartículas del Metal/química , Fotoquímica/métodos , Antifúngicos/administración & dosificación , Antifúngicos/síntesis química , Aspergillus nidulans/crecimiento & desarrollo , Compuestos de Bario/administración & dosificación , Compuestos de Bario/química , Compuestos de Bario/efectos de la radiación , Catálisis/efectos de la radiación , Supervivencia Celular/efectos de los fármacos , Cobre/administración & dosificación , Cobre/química , Cobre/efectos de la radiación , Relación Dosis-Respuesta a Droga , Oro/administración & dosificación , Oro/química , Oro/efectos de la radiación , Luz , Ensayo de Materiales , Nanopartículas del Metal/efectos de la radiación , Titanio/administración & dosificación , Titanio/química , Titanio/efectos de la radiaciónRESUMEN
The development of highly conductive metallic electrodes with long-term reliability is in great demand for real industrialization of flexible electronics, which undergo repeated mechanical deformation during service. In the case of vacuum-deposited metallic electrodes, adequate conductivity is provided, but it degrades gradually during cyclic mechanical deformation. Here, we demonstrate a long-term reliable Ag electrode by inkjet printing. The electrical conductivity and the mechanical reliability during cyclic bending are investigated with respect to the nanoporous microstructure caused by post heat treatment, and are compared to those of evaporated Ag films of the same thickness. It is shown that there is an optimized nanoporous microstructure for inkjet-printed Ag films, which provides a high conductivity and improved reliability. It is argued that the nanoporous microstructure ensures connectivity within the particle network and at the same time reduces plastic deformation and the formation of fatigue damage. This concept provides a new guideline to develop an efficient method for highly conductive and reliable metallic electrodes for flexible electronics.
RESUMEN
The electrochemical carbon dioxide (CO2) reduction reaction (CO2RR) is considered a promising technology for converting atmospheric CO2 into value-added compounds by utilizing renewable energy. The CO2RR has developed in various ways over the past few decades, including product selectivity, current density, and catalytic stability. However, its commercialization is still unsuitable in terms of economic feasibility. One of the major challenges in its commercialization is the low single-pass conversion efficiency (SPCE) of CO2, which is primarily caused by the formation of carbonate (CO32-) in neutral and alkaline electrolytes. Notably, the majority of CO2RRs take place in such media, necessitating significant energy input for CO2 regeneration. Therefore, performing the CO2RR under conditions that minimize CO32- formation to suppress reactant and electrolyte ion loss is regarded an optimal strategy for practical applications. Here, we introduce the recent progress and perspectives in the electrochemical CO2RR in acidic electrolytes, which receives great attention because of the inhibition of CO32- formation. This includes the categories of nanoscale catalytic design, microscale microenvironmental effects, and bulk scale applications in electrolyzers for zero carbon loss reactions. Additionally, we offer insights into the issue of limited catalytic durability, a notable drawback under acidic conditions and propose guidelines for further development of the acidic CO2RR.
RESUMEN
Various electrocatalysts are extensively examined for their ability to selectively produce desired products by electrochemical CO2 reduction reaction (CO2RR). However, an efficient CO2RR electrocatalyst doesn't ensure an effective co-catalyst on the semiconductor surface for photoelectrochemical CO2RR. Herein, Bi2S3 nanorods are synthesized and electrochemically reduced to Bi nanoplates that adhere to the substrates for application in the electrochemical and photoelectrochemical CO2RR. Compared with commercial-Bi, the Bi2S3-derived Bi (S-Bi) nanoplates on carbon paper exhibit superior electrocatalytic activity and selectivity for formate (HCOO-) in the electrochemical CO2RR, achieving a Faradaic efficiency exceeding 93%, with minimal H2 production over a wide potential range. This highly selective S-Bi catalyst is being employed on the Si photocathode to investigate the behavior of electrocatalysts during photoelectrochemical CO2RR. The strong adhesion of the S-Bi nanoplates to the Si nanowire substrate and their unique catalytic properties afford exceptional activity and selectivity for HCOO- under simulated solar irradiation. The selectivity observed in electrochemical CO2RR using the S-Bi catalyst correlates with that seen in the photoelectrochemical CO2RR system. Combined pulsed potential methods and theoretical analyses reveal stabilization of the OCHO* intermediate on the S-Bi catalyst under specific conditions, which is critical for developing efficient catalysts for CO2-to-HCOO- conversion.
RESUMEN
High-rate production of multicarbon chemicals via the electrochemical CO2 reduction can be achieved by efficient CO2 mass transport. A key challenge for C-C coupling in high-current-density CO2 reduction is how to promote *CO formation and dimerization. Here, we report molecularly enhanced CO2-to-*CO conversion and *CO dimerization for high-rate ethylene production. Nanoconfinement of ascorbic acid by graphene quantum dots enables immobilization and redox reversibility of ascorbic acid in heterogeneous electrocatalysts. Cu nanowire with ascorbic acid nanoconfined by graphene quantum dots (cAA-CuNW) demonstrates high-rate ethylene production with a Faradaic efficiency of 60.7% and a partial current density of 539 mA/cm2, a 2.9-fold improvement over that of pristine CuNW. Furthermore, under low CO2 ratio of 33%, cAA-CuNW still exhibits efficient ethylene production with a Faradaic efficiency of 41.8%. We find that cAA-CuNW increases *CO coverage and optimizes the *CO binding mode ensemble between atop and bridge for efficient C-C coupling. A mechanistic study reveals that ascorbic acid can facilitate *CO formation and dimerization by favorable electron and proton transfer with strong hydrogen bonding.
RESUMEN
Upgrading carbon dioxide/monoxide to multi-carbon C2+ products using renewable electricity offers one route to more sustainable fuel and chemical production. One of the most appealing products is acetate, the profitable electrosynthesis of which demands a catalyst with higher efficiency. Here, a coordination polymer (CP) catalyst is reported that consists of Cu(I) and benzimidazole units linked via Cu(I)-imidazole coordination bonds, which enables selective reduction of CO to acetate with a 61% Faradaic efficiency at -0.59 volts versus the reversible hydrogen electrode at a current density of 400 mA cm-2 in flow cells. The catalyst is integrated in a cation exchange membrane-based membrane electrode assembly that enables stable acetate electrosynthesis for 190 h, while achieving direct collection of concentrated acetate (3.3 molar) from the cathodic liquid stream, an average single-pass utilization of 50% toward CO-to-acetate conversion, and an average acetate full-cell energy efficiency of 15% at a current density of 250 mA cm-2 .
RESUMEN
High-rate conversion of carbon dioxide (CO2 ) to ethylene (C2 H4 ) in the CO2 reduction reaction (CO2 RR) requires fine control over the phase boundary of the gas diffusion electrode (GDE) to overcome the limit of CO2 solubility in aqueous electrolytes. Here, a metal-organic framework (MOF)-functionalized GDE design is presented, based on a catalysts:MOFs:hydrophobic substrate materials layered architecture, that leads to high-rate and selective C2 H4 production in flow cells and membrane electrode assembly (MEA) electrolyzers. It is found that using electroanalysis and operando X-ray absorption spectroscopy (XAS), MOF-induced organic layers in GDEs augment the local CO2 concentration near the active sites of the Cu catalysts. MOFs with different CO2 adsorption abilities are used, and the stacking ordering of MOFs in the GDE is varied. While sputtering Cu on poly(tetrafluoroethylene) (PTFE) (Cu/PTFE) exhibits 43% C2 H4 Faradaic efficiency (FE) at a current density of 200 mA cm- 2 in a flow cell, 49% C2 H4 FE at 1 A cm- 2 is achieved on MOF-augmented GDEs in CO2 RR. MOF-augmented GDEs are further evaluated in an MEA electrolyzer, achieving a C2 H4 partial current density of 220 mA cm-2 for CO2 RR and 121 mA cm-2 for the carbon monoxide reduction reaction (CORR), representing 2.7-fold and 15-fold improvement in C2 H4 production rate, compared to those obtained on bare Cu/PTFE.
RESUMEN
Electrocatalysis, whose reaction venue locates at the catalyst-electrolyte interface, is controlled by the electron transfer across the electric double layer, envisaging a mechanistic link between the electron transfer rate and the electric double layer structure. A fine example is in the CO2 reduction reaction, of which rate shows a strong dependence on the alkali metal cation (M+) identity, but there is yet to be a unified molecular picture for that. Using quantum-mechanics-based atom-scale simulation, we herein scrutinize the M+-coupling capability to possible intermediates, and establish H+- and M+-associated ET mechanisms for CH4 and CO/C2H4 formations, respectively. These theoretical scenarios are successfully underpinned by Nernstian shifts of polarization curves with the H+ or M+ concentrations and the first-order kinetics of CO/C2H4 formation on the electrode surface charge density. Our finding further rationalizes the merit of using Nafion-coated electrode for enhanced C2 production in terms of enhanced surface charge density.
RESUMEN
Nitrogen-doped graphene-supported single atoms convert CO2 to CO, but fail to provide further hydrogenation to methane - a finding attributable to the weak adsorption of CO intermediates. To regulate the adsorption energy, here we investigate the metal-supported single atoms to enable CO2 hydrogenation. We find a copper-supported iron-single-atom catalyst producing a high-rate methane. Density functional theory calculations and in-situ Raman spectroscopy show that the iron atoms attract surrounding intermediates and carry out hydrogenation to generate methane. The catalyst is realized by assembling iron phthalocyanine on the copper surface, followed by in-situ formation of single iron atoms during electrocatalysis, identified using operando X-ray absorption spectroscopy. The copper-supported iron-single-atom catalyst exhibits a CO2-to-methane Faradaic efficiency of 64% and a partial current density of 128 mA cm-2, while the nitrogen-doped graphene-supported one produces only CO. The activity is 32 times higher than a pristine copper under the same conditions of electrolyte and bias.
RESUMEN
Polymorph conversion of transition metal dichalcogenides (TMDs) offers intriguing material phenomena that can be applied for tuning the intrinsic properties of 2D materials. In general, group VIB TMDs can have thermodynamically stable 2H phases and metastable 1T/T' phases. Herein, we report key principles to apply carbon monoxide (CO)-based gas-solid reactions for a universal polymorph conversion of group VIB TMDs without forming undesirable compounds. We found that the process conditions are strongly dependent on the reaction chemical potential of cations in the TMDs, which can be predicted by thermodynamic calculations, and that polymorphic conversion is triggered by S vacancy (VS) formation. Furthermore, we conducted DFT calculations for the reaction barriers of VS formation and S diffusion to reveal the polymorph conversion mechanism of WS2 and compared it with that of MoS2. We believe that phase engineering 2D materials via thermodynamically designed gas-solid reactions could be functionally used to achieve defect-related nanomaterials.