RESUMEN
Lead halide perovskites are promising semiconducting materials for solar energy harvesting. However, the presence of heavy-metal lead ions is problematic when considering potential harmful leakage into the environment from broken cells and also from a public acceptance point of view. Moreover, strict legislation on the use of lead around the world has driven innovation in the development of strategies for recycling end-of-life products by means of environmentally friendly and cost-effective routes. Lead immobilization is a strategy to transform water-soluble lead ions into insoluble, nonbioavailable and nontransportable forms over large pH and temperature ranges and to suppress lead leakage if the devices are damaged. An ideal methodology should ensure sufficient lead-chelating capability without substantially influencing the device performance, production cost and recycling. Here we analyse chemical approaches to immobilize Pb2+ from perovskite solar cells, such as grain isolation, lead complexation, structure integration and adsorption of leaked lead, based on their feasibility to suppress lead leakage to a minimal level. We highlight the need for a standard lead-leakage test and related mathematical model to be established for the reliable evaluation of the potential environmental risk of perovskite optoelectronics.
RESUMEN
Tin is the frontrunner for substituting toxic lead in perovskite solar cells. However, tin suffers the detrimental oxidation of SnII to SnIV . Most of reported strategies employ SnF2 in the perovskite precursor solution to prevent SnIV formation. Nevertheless, the working mechanism of this additive remains debated. To further elucidate it, we investigate the fluoride chemistry in tin halide perovskites by complementary analytical tools. NMR analysis of the precursor solution discloses a strong preferential affinity of fluoride anions for SnIV over SnII , selectively complexing it as SnF4 . Hard X-ray photoelectron spectroscopy on films shows the lower tendency of SnF4 than SnI4 to get included in the perovskite structure, hence preventing the inclusion of SnIV in the film. Finally, small-angle X-ray scattering reveals the strong influence of fluoride on the colloidal chemistry of precursor dispersions, directly affecting perovskite crystallization.
RESUMEN
Electrophoresis (EP) and dielectrophoresis (DEP) are the two well-established methodologies to manipulate nanoparticles (NPs). Recently, DEP by a virtual electrode platform was demonstrated on ferroelectric substrates, where the driving force is due to the strong electric field generated by the pyroelectric effect, thus opening new scenarios for manipulating the matter. Such an innovative approach named pyroelectric-DEP has several advantages over traditional EP and DEP. However, a detailed study on this novel approach is required for understanding the complex pathways traced by NPs under the action of the pyroelectric-driven forces and thus for explaining the final patterns. Here, we investigate experimentally the dynamic behavior of CdSe NPs through time-lapse fluorescence microscopy imaging. Complete visualization and measurement of the directed-assembling process of NPs immersed in polydimethylsiloxane fluid is reported, which shows some unpredicted results with respect to the previous works, thus opening the route for designing in principle a reversible and switchable device allowing two different and reversible final NP-patterned states. The observed phenomena are fully analyzed by experimental and simulated analysis, and the movements of NPs is performed to elucidate in depth the involved processes. The investigation furnishes an interesting result that the complex behavior of the NPs can be fully comprehended and explained by considering the superposition of both EP and DEP forces.
RESUMEN
Daily temperature variations induce phase transitions and lattice strains in halide perovskites, challenging their stability in solar cells. We stabilized the perovskite black phase and improved solar cell performance using the ordered dipolar structure of ß-poly(1,1-difluoroethylene) to control perovskite film crystallization and energy alignment. We demonstrated p-i-n perovskite solar cells with a record power conversion efficiency of 24.6% over 18 square millimeters and 23.1% over 1 square centimeter, which retained 96 and 88% of the efficiency after 1000 hours of 1-sun maximum power point tracking at 25° and 75°C, respectively. Devices under rapid thermal cycling between -60° and +80°C showed no sign of fatigue, demonstrating the impact of the ordered dipolar structure on the operational stability of perovskite solar cells.
RESUMEN
Lead (Pb) is one of the most toxic elements in existence and has been used by humans for thousands of years. With only a few exceptions, each widespread application of lead has been banned systematically due to dramatic environmental and health consequences. However, we are now at the dawn of the perovskite era, potentially requiring yet again the widespread application of lead.
Asunto(s)
Compuestos de Calcio , Plomo , Compuestos de Calcio/toxicidad , Humanos , Óxidos/toxicidad , Titanio/toxicidadRESUMEN
Metal halide perovskites are set to revolutionise photovoltaic energy harvesting owing to an unmatched combination of high efficiency and low fabrication costs. However, to improve the sustainability of this technology, replacing lead with less toxic tin is highly desired. Tin halide perovskites are approaching 15% in power conversion efficiency (PCE), mainly employing PEDOT:PSS as a hole-selective layer. Unfortunately, PEDOT:PSS is processed from an aqueous solution, which is hardly compatible with the strict anoxic requirements for processing tin halide perovskites due to tin's instability to oxidation. Here, we present a water-free PEDOT formulation for developing tin-based lead-free perovskite solar cells. We show that the main difference between the PCE of devices made from aqueous and water-free PEDOT is due to the marked hydrophobicity of the latter, which complicates the perovskite deposition. By modifying the surface of water-free PEDOT with a thin Al2O3 interlayer, we could achieve good perovskite morphology that enabled perovskite solar cells with a PCE of 7.5%.
RESUMEN
The water-oil interface is an environment that is often found in many contexts of the natural sciences and technological arenas. This interface has always been considered a special environment as it is rich in different phenomena, thus stimulating numerous studies aimed at understanding the abundance of physico-chemical problems that occur there. The intense research activity and the intriguing results that emerged from these investigations have inspired scientists to consider the water-oil interface even as a suitable setting for bottom-up nanofabrication processes, such as molecular self-assembly, or fabrication of nanofilms or nano-devices. On the other hand, biphasic liquid separation is a key enabling technology in many applications, including water treatment for environmental problems. Here we show for the first time an instant nanofabrication strategy of a thin film of biopolymer at the water-oil interface. The polymer film is fabricated in situ, simply by injecting a drop of polymer solution at the interface. Furthermore, we demonstrate that with an appropriate multiple drop delivery it is also possible to quickly produce a large area film (up to 150 cm2). The film inherently separates the two liquids, thus forming a separation layer between them and remains stable at the interface for a long time. Furthermore, we demonstrate the fabrication with different oils, thus suggesting potential exploitation in different fields (e.g. food, pollution, biotechnology). We believe that the new strategy fabrication could inspire different uses and promote applications among the many scenarios already explored or to be studied in the future at this special interface environment.
RESUMEN
Controlling the crystallization of perovskite in a thin film is essential in making solar cells. Processing tin-based perovskite films from solution is challenging because of the uncontrollable faster crystallization of tin than the most used lead perovskite. The best performing devices are prepared by depositing perovskite from dimethyl sulfoxide because it slows down the assembly of the tin-iodine network that forms perovskite. However, while dimethyl sulfoxide seems the best solution to control the crystallization, it oxidizes tin during processing. This work demonstrates that 4-(tert-butyl) pyridine can replace dimethyl sulfoxide to control the crystallization without oxidizing tin. We show that tin perovskite films deposited from pyridine have a 1 order of magnitude lower defect density, which promotes charge mobility and photovoltaic performance.
RESUMEN
One of the most important substances on Earth is water. It is an essential medium for living microorganisms and for many technological and industrial processes. Confining water in an enclosed compartment without manipulating it or by using rigid containers can be very attractive, even more if the container is biocompatible and biodegradable. Here, we propose a water-based bottom-up approach for facile encasing of short-lived water silhouettes by a custom-made adaptive suit. A biocompatible polymer self-assembling with unprecedented degree of freedom over the water surface directly produces a thin membrane. The polymer film could be the external container of a liquid core or a free-standing layer with personalized design. The membranes produced have been characterized in terms of physical properties, morphology and proposed for various applications from nano- to macroscale. The process appears not to harm cells and microorganisms, opening the way to a breakthrough approach for organ-on-chip and lab-in-a-drop experiments.
RESUMEN
In this study, we report a direct writing method for the fabrication of microfluidic footpaths by pyro-electrohydrodynamic (EHD) jet printing. Here, we propose the use of a nozzle-free three-dimensional printing technique for the fabrication of printed structures that can be embedded in a variety of soft, transparent, flexible, and biocompatible polymers and thus easily integrated into lab-on-chip devices. We prove the advantage of the high resolution and flexibility of pyro-EHD printing for the realization of microfluidic channels well below the standard limit in dimension of conventional ink-jet printing technique and simply adaptable to the end-user desires in terms of geometry and materials. Starting from the description of the innovative approach proposed for the channel fabrication, we demonstrate the design, fabrication, and proof of a microfluidic matrix of interconnected channels. The method described here could be a breakthrough technology for the fabrication of in situ implantable, stretchable, and biocompatible devices, opening new routes in the field of biomedical engineering and wearable electronics.