A capillary electrophoresis method for the determination of the linagliptin enantiomeric impurity.

Linagliptin is a highly specific, long-acting inhibitor that is used as an orally administrable agent for type-2 diabetes treatment. Because only the R-enantiomer is of clinical use, we developed a capillary electrophoresis method for the determination of the enantiomeric impurity of this compound. Carboxymethyl-ß-cyclodextrin was selected as the chiral selector for the separation of linagliptin enantiomers. Design of experiments and desirability functions were used for the analytical optimization, which was focused on understanding and improving the electrophoretic process. The effects of significant parameters (background electrolyte concentration and pH, cyclodextrin concentration, temperature, and voltage) were thoroughly investigated. The complete separation of linagliptin and its enantiomeric impurity with baseline resolution was achieved within 10 min on an uncoated fused-silica capillary (50 µm inner diameter, 365 µm outer diameter, 64.5/56 cm in total/ effective length) maintained at 25°C, under an applied voltage of 28.0 kV. The background electrolyte contained 70 mM sodium acetate and 4.7 mM carboxymethyl-ß-cyclodextrin, and the pH was adjusted to 6.10. The method was validated, and a limit of quantitation of 0.05% for the impurity was estimated.

Facile Preparation Method of TiO2/Activated Carbon for Photocatalytic Degradation of Methylene Blue.

The development of nanocomposite photocatalysts with high photocatalytic activity, cost-effectiveness, a simple preparation process, and scalability for practical applications is of great interest. In this study, nanocomposites of TiO2 Degussa P25 nanoparticles/activated carbon (TiO2/AC) were prepared at various mass ratios of (4:1), (3:2), (2:3), and (1:4) by a facile process involving manual mechanical pounding, ultrasonic-assisted mixing in an ethanol solution, paper filtration, and mild thermal annealing. The characterization methods included XRD, SEM-EDS, Raman, FTIR, XPS, and UV-Vis spectroscopies. The effects of TiO2/AC mass ratios on the structural, morphological, and photocatalytic properties were systematically studied in comparison with bare TiO2 and bare AC. TiO2 nanoparticles exhibited dominant anatase and minor rutile phases and a crystallite size of approximately 21 nm, while AC had XRD peaks of graphite and carbon and a crystallite size of 49 nm. The composites exhibited tight decoration of TiO2 nanoparticles on micron-/submicron AC particles, and uniform TiO2/AC composites were obtained, as evidenced by the uniform distribution of Ti, O, and C in an EDS mapping. Moreover, Raman spectra show the typical vibration modes of anatase TiO2 (e.g., E1g(1), B1g(1), Eg(3)) and carbon materials with D and G bands. The TiO2/AC with (4:1), (3:2), and (2:3) possessed higher reaction rate constants (k) in photocatalytic degradation of methylene blue (MB) than that of either TiO2 or AC. Among the investigated materials, TiO2/AC = 4:1 achieved the highest photocatalytic activity with a high k of 55.2 × 10-3 min-1 and an MB removal efficiency of 96.6% after 30 min of treatment under UV-Vis irradiation (120 mW/cm2). The enhanced photocatalytic activity for TiO2/AC is due to the synergistic effect of the high adsorption capability of AC and the high photocatalytic activity of TiO2. Furthermore, TiO2/AC promotes the separation of photoexcited electron/hole (e-/h+) pairs to reduce their recombination rate and thus enhance photocatalytic activity. The optimal TiO2/AC composite with a mass ratio of 4/1 is suggested for treating industrial or household wastewater with organic pollutants.

Chiral high-performance liquid chromatographic separation of evodiamine enantiomers and rutaecarpine, isolated from Evodiae fructus.

A rapid, simple and sensitive chiral HPLC method was developed and validated for quantification of biologically important alkaloids namely evodiamine enantiomers and rutaecarpine in Evodiae fructus using diphenhydramine as the internal standard (IS). Chromatographic separations were performed on a Chiralpak AD-H column (250 mm × 4.6 mm i.d., 5 µm) with elution of n-hexane-2-propanol-ethanol (70:20:10, v/v/v) in a flow rate of 0.7 ml/min and at λmax 225 nm. To identify the order of elution, small quantities of the each evodiamine enantiomer were isolated by semi preparative HPLC method. Extraction samples were prepared by a simple solid phase extraction (SPE) method. All calibration curves showed good linearity (r(2)≥0.999) within the test ranges. The LOD and LOQ were lower than 0.05 and 0.1 µg/ml, respectively. The RSDs of intra- and interday for relative peak areas of three analytes to IS were less than 3.2 and 2.5%, respectively, and the recoveries were 98.0-103.7%. The validated method was successfully applied to the quantitative analysis of three constituents in 13 batches of samples collected from market. The results showed that S-(+)-evodiamine was the main component while R-(-)-evodiamine was present in low concentration. This study provides a qualitative and quantitative method for analysis of evodiamine enantiomers and rutaecarpine, and should be extendable to pharmacological and toxicological studies of the individual evodiamine enantiomers.

Preparation of 2R, 3S, 2'R-nadolol enantiomer using S-(-)-menthyl chloroformate as a chiral derivatizing reagent.

Stereoisomers of nadolol were derivatized with S-(-)-menthyl chloroformate((-)-MCF) forming their diastereomers, RSR-nadolol-(-)-MCF, SRS-nadolol-(-)-MCF, RRS-nadolol-(-)-MCF and SSRnadolol-(-)-MCF. Diastereomeric mixture were then chromatographically resolved by preparative HPLC (JAIGEL-ODS-BP-L, 500 × 25 mm column) eluted with methanol-water (84:16, v/v) at flow rate 2.5 mL/min. RSR-nadolol-(-)-MCF diastereomer was hydrolyzed with 5% LiOH at 80°C for 48 h, and the decomposed mixture was further purified by semi-preparative HPLC. The purity and final yield of RSR-nadolol were 99.97% and 12.95%, respectively.