Synthesis of SiO2@Ag Nanocomposite for Investigating Metal-Enhanced Fluorescence and Surface-Enhanced Raman Spectroscopy.

SiO2@Ag nanocomposite (NC) has been synthesized by the chemical reduction and StÓ§ber method for Metal-enhanced fluorescence (MEF) of Rhodmine 6G (R6G) and Surface-enhanced Raman spectroscopy (SERS) of Malachite green (MG). As-synthesized SiO2@Ag NC indicated SiO2 nanosphere (NS) and Ag nanoparticle (NP) morphologies. The SiO2@Ag NC was high quality with a well-defined crystallite phase with average sizes of 24 nm and 132 nm for Ag NP and SiO2 NC, respectively. By using SiO2@Ag NC, the photoluminescence (PL) intensity of the R6G (at 59.17 ppm) was increased approximately 133 times. The SERS of the MG (at 1.0 ppm) with SiO2@Ag NC as substrate clearly observed vibrational modes in MG dye at 798, 916, 1172, 1394, and 1616 cm-1. As a result, the SERS enhancement factor (EFSERS) at 1172 cm-1 obtained 6.3 × 106. This initial study points to the potential of SiO2@Ag NC as a promising material for MEF and SERS substrates to detect dyes at low concentrations.

A practical approach to nutritional intervention for people with chronic kidney disease in Vietnam.

BACKGROUND AND OBJECTIVES: A comprehensive nutritional management is necessary for favourable outcomes in patients with chronic kidney disease (CKD). We aimed to assess the changes in nutritional status and disease progression with nutritional management where renal replacement therapy (RRT) was not in place. METHODS AND STUDY DESIGN: A quasi-experiment intervention was conducted on 70 CKD patients at stages 3-5 from July to December 2022. Participants were excluded if they underwent RRT, including dialy-sis (hemodialysis or peritoneal dialysis), or kidney transplantation. The nutritional regimen covered nutrition-al counseling, samples of the dietary menu, and supplement products. We evaluated nutritional status using Subjective Global Assessment (SGA) scale and sub-clinical blood test at T0 (hospital admission) and T1 (two weeks after the admission or 24 hours before the discharge). RESULTS: After the intervention, the number of patients classified as malnutrition or at risk of malnourished reduced significantly (65.7% to 54.3% and 25.7% and 5.7%, respectively). The serum concentration of urea, creatinine and parathyroid hormone decreased remarkably, especially in patients receiving nutritional management. In the intervention group, the dietary pattern provided increased intakes of calcium and iron at T1, while phosphorus, sodium and potassium decreased after follow-up. Nausea/vomiting, loss of appetite, tiredness and sleep disorders were improved in the intervention compared to the control group. CONCLUSIONS: Nutritional therapy enhanced the nutritional sta-tus, and quality of dietary and renal function in CKD patients without RRT. Applying nutrition education and treatment at an early stage can slow CKD progression, which should be applicable elsewhere in Vietnam.

Transforming Spirulina maxima Biomass into Ultrathin Bioactive Coatings Using an Atmospheric Plasma Jet: A New Approach to Healing of Infected Wounds.

The challenge of wound healing, particularly in patients with comorbidities such as diabetes, is intensified by wound infection and the accelerating problem of bacterial resistance to current remedies such as antibiotics and silver. One promising approach harnesses the bioactive and antibacterial compound C-phycocyanin from the microalga Spirulina maxima. However, the current processes of extracting this compound and developing coatings are unsustainable and difficult to achieve. To circumvent these obstacles, a novel, sustainable argon atmospheric plasma jet (Ar-APJ) technology that transforms S. maxima biomass into bioactive coatings is presented. This Ar-APJ can selectively disrupt the cell walls of S. maxima, converting them into bioactive ultrathin coatings, which are found to be durable under aqueous conditions. The findings demonstrate that Ar-APJ-transformed bioactive coatings show better antibacterial activity against Staphylococcus aureus and Pseudomonas aeruginosa. Moreover, these coatings exhibit compatibility with macrophages, induce an anti-inflammatory response by reducing interleukin 6 production, and promote cell migration in keratinocytes. This study offers an innovative, single-step, sustainable technology for transforming microalgae into bioactive coatings. The approach reported here has immense potential for the generation of bioactive coatings for combating wound infections and may offer a significant advance in wound care research and application.

Research and Development Prospects for Sugarcane Industry in Vietnam.

Sugarcane is one of the most important industrial crops in Vietnam and covers a total of 127,000 hectares of plantation area. In the season 2020-2021, Vietnam has produced 0.763 million tons of sugar (accounting for 0.34% total world sugar production). A current sugarcane production of 7.498 million tons is being used mainly for sugar production for direct consumption, ethanol production, bio-electricity and fertilization. To ensure crop sustainability, various policies and plans have been implemented. Crop breeding and zoning improvement programme significantly influence sugarcane production and sugar yield. Over 25 years since the programme "one million ton of sugar" was promoted, Vietnam currently possesses 25 sugar mills with a total capacity of 110,000 tons of sugarcane per day. Major problems of sugarcane industry as well as research and development have been discussed in this review. Recent research and development work focused on the added values of co-products to ensure sustainability of the sugarcane industry. Molasses will be used for ethanol production, and bagasse is used as the biomass for the alternative energy. Sugarcane and sugar would be the main feedstocks for those bio-economy growths in Vietnam. To keep the sustainable development of the sugar industry, and to meet the demand of the food and non-food requirements, it is necessary to upgrade the sugar value chain through the adoption and the development of co-products of the sugar industry.

The relationship between hyperbilirubinemia and the promoter region and first exon of UGT1A1 gene polymorphisms in Vietnamese newborns.

BACKGROUND: To investigate the relationship between unexplained indirect hyperbilirubinemia of Vietnamese newborns and the polymorphism of the promoter TATA box and exon 1 of bilirubin uridine diphosphate glucuronosyltransferase (UGT1A1) gene. METHODS: A total of 149 neonates were divided into the hyperbilirubinemia group (n = 99) and control group (n = 50). The gene polymorphisms of UGT1A1 gene in the two groups were detected by PCR and direct sequencing, which revealed the relationship between UGT1A1 polymorphism with neonatal hyperbilirubinemia of neonates. The types of UGT1A1 polymorphism in the hyperbilirubinemia group and the peak total serum bilirubin (PSB) levels with different genotypes were observed. RESULTS: (1) (TA)7 insertion mutation, 211G>A, 189C>T, 190G>A, 378C>T and 686C>A were detected. (2) The allele frequency of 211G>A allele mutation was significantly different between the two groups (p < 0.05). (3) Logistic regression analysis showed that homozygosity and heterozygosity of 211G>A were both significantly associated with neonatal hyperbilirubinemia. (4) In the hyperbilirubinemia group, the peak total serum bilirubin level of 211G>A homozygous neonates was higher than that of the wild-type neonates (p < 0.05). CONCLUSIONS: We noted that there was an association between neonates with unexplained indirect hyperbilirubinemia in Vietnam and the polymorphism of UGT1A1c.211G>A. In addition, the homozygous 211G>A polymorphism was related to the degree of hyperbilirubinemia. IMPACT: Our article provided data on UGT1A1 polymorphism distribution in the Vietnamese population, which have not been reported yet. Our findings revealed that mutations in UGT1A1 gene are risk factors for unexplained hyperbilirubinemia in Vietnamese neonates. Our article will strengthen the cognition of neonatal jaundice at the genetic level in the pediatric field in Vietnam.

Heterologous expression of a recombinant lactobacillal ß-galactosidase in Lactobacillus plantarum: effect of different parameters on the sakacin P-based expression system.

BACKGROUND: Two overlapping genes lacL and lacM (lacLM) encoding for heterodimeric ß-galactosidase from Lactobacillus reuteri were previously cloned and over-expressed in the food-grade host strain Lactobacillus plantarum WCFS1, using the inducible lactobacillal pSIP expression system. In this study, we analyzed different factors that affect the production of recombinant L. reuteri ß-galactosidase. RESULTS: Various factors related to the cultivation, i.e. culture pH, growth temperature, glucose concentration, as well as the induction conditions, including cell concentration at induction point and inducer concentration, were tested. Under optimal fermentation conditions, the maximum ß-galactosidase levels obtained were 130 U/mg protein and 35-40 U/ml of fermentation broth corresponding to the formation of approximately 200 mg of recombinant protein per litre of fermentation medium. As calculated from the specific activity of the purified enzyme (190 U/mg), ß-galactosidase yield amounted to roughly 70% of the total soluble intracellular protein of the host organism. It was observed that pH and substrate (glucose) concentration are the most prominent factors affecting the production of recombinant ß-galactosidase. CONCLUSIONS: The over-expression of recombinant L. reuteri ß-galactosidase in a food-grade host strain was optimized, which is of interest for applications of this enzyme in the food industry. The results provide more detailed insight into these lactobacillal expression systems and confirm the potential of the pSIP system for efficient, tightly controlled expression of enzymes and proteins in lactobacilli.

Ballistic parameters and trauma potential of carbon dioxide-actuated arrow pistols.

Medical literature abounds with reports of injuries and fatalities caused by arrows and crossbow bolts. Crossbows are of particular forensic and traumatological interest, because their mode of construction allows for temporary mechanical storage of energy. A newly developed type of pistol (Arcus Arrowstar), which belongs to the category of air and carbon dioxide weapons, discharges arrow-shaped bolts actuated by carbon dioxide cylinders. As, to the best of the authors' knowledge, literature contains no information on this uncommon subclass of weapons it is the aim of this work to provide the experimental data and to assess the trauma potential of these projectiles based on the ascertained physical parameters. Basic kinetic parameters of these carbon dioxide-actuated bolts (velocity v = 39 m/s, energy E = 7.2 J, energy density E' = 0.26 J/mm(2)) are similar to bolts discharged by pistol crossbows. Subsequent firing resulted in a continuous and fast decrease in kinetic energy of the arrows. Test shots into ballistic soap blocks reveal a high penetration capacity, especially when compared to conventional projectiles of equal kinetic energy values (like, e.g., airgun pellets). To conclude, these data demonstrate the high efficiency of arrow-shaped projectiles, which are also characterized by a high cross-sectional density (ratio of mass to cross-sectional area of a projectile).

Straightforward electrochemical synthesis of a Co3O4 nanopetal/ZnO nanoplate p-n junction for photoelectrochemical water splitting.

Hydrogen production through photoelectrochemical (PEC) reactions is an innovative and promising approach to producing clean energy. The PEC working electrode of a Co3O4/ZnO-based p-n heterojunction was prepared by a straightforward electrochemical deposition with different deposition times onto an FTO (Fluorine-doped Tin Oxide) glass substrate. The successful synthesis of the materials was confirmed through analysis using XRD, FTIR, SEM-EDX, DRS, and PL techniques. Mott-Schottky plots and some characterization studies also checked the determination of the formation of the p-n junction. Co3O4/ZnO/FTO with a Co3O4 deposition time of 2 minutes exhibited the lowest onset potential of 0.82 V and the lowest overpotential of 470 mV at a current density of 10 mA cm -2. Furthermore, the photo-conversion efficiency of the Co3O4/ZnO/FTO sample showed 1.4 times higher current density than the ZnO/FTO sample. A mechanism is also proposed to enhance the Co3O4/ZnO/FTO electrode photo-electrocatalytic activity involved in the water-splitting reaction. The Co3O4/ZnO/FTO electrode shows significant potential as a promising PEC electrode to produce hydrogen.

Biomimetic Bacterium-like Particles Loaded with Aggregation-Induced Emission Photosensitizers as Plasma Coatings for Implant-Associated Infections.

Developing novel antibacterial strategies has become an urgent requisite to overcome the increasing pervasiveness of antimicrobial-resistant bacteria and the advent of biofilms. Aggregation-induced emission-based photosensitizers (AIE PSs) are promising candidates due to their unique photodynamic and photothermal properties. Bioengineering structure-inherent AIE PSs for developing thin film coatings is still an unexplored area in the field of nanoscience. We have adopted a synergistic approach combining plasma technology and AIE PS-based photodynamic therapy to develop coatings that can eradicate bacterial infections. Here, we loaded AIE PSs within biomimetic bacterium-like particles derived from a probiotic strain, Lactobacillus fermentum. These hybrid conjugates are then immobilized on polyoxazoline-coated substrates to develop a bioinspired coating to fight against implant-associated infections. These coatings could selectively kill Gram-positive and Gram-negative bacteria, but not damage mammalian cells. The mechanistic studies revealed that the coatings can generate reactive oxygen species that can rupture the bacterial cell membranes. The mRNA gene expression of proinflammatory cytokines confirmed that they can modulate infection-related immune responses. Thus, this nature-inspired design has opened a new avenue for the fabrication of a next-generation antibacterial coating to reduce infections and associated burdens.

Surface-Displayed Mannanolytic and Chitinolytic Enzymes Using Peptidoglycan Binding LysM Domains.

Using Lactiplantibacillus plantarum as a food-grade carrier to create non-GMO whole-cell biocatalysts is gaining popularity. This work evaluates the immobilization yield of a chitosanase (CsnA, 30 kDa) from Bacillus subtilis and a mannanase (ManB, 40 kDa) from B. licheniformis on the surface of L. plantarum WCFS1 using either a single LysM domain derived from the extracellular transglycosylase Lp_3014 or a double LysM domain derived from the muropeptidase Lp_2162. ManB and CsnA were fused with the LysM domains of Lp_3014 or Lp_2162, produced in Escherichia coli and anchored to the cell surface of L. plantarum. The localization of the recombinant proteins on the bacterial cell surface was successfully confirmed by Western blot and flow cytometry analysis. The highest immobilization yields (44-48%) and activities of mannanase and chitosanase on the displaying cell surface (812 and 508 U/g of dry cell weight, respectively) were obtained when using the double LysM domain of Lp_2162 as an anchor. The presence of manno-oligosaccharides or chito-oligosaccharides in the reaction mixtures containing appropriate substrates and ManB or CsnA-displaying cells was determined by high-performance anion exchange chromatography. This study indicated that non-GMO Lactiplantibacillus chitosanase- and mannanase-displaying cells could be used to produce potentially prebiotic oligosaccharides.

A Systematic Study of the Temperature Dependence of the Dielectric Function of GaSe Uniaxial Crystals from 27 to 300 K.

We report the temperature dependences of the dielectric function ε = ε1 + iε2 and critical point (CP) energies of the uniaxial crystal GaSe in the spectral energy region from 0.74 to 6.42 eV and at temperatures from 27 to 300 K using spectroscopic ellipsometry. The fundamental bandgap and strong exciton effect near 2.1 eV are detected only in the c-direction, which is perpendicular to the cleavage plane of the crystal. The temperature dependences of the CP energies were determined by fitting the data to the phenomenological expression that incorporates the Bose-Einstein statistical factor and the temperature coefficient to describe the electron-phonon interaction. To determine the origin of this anisotropy, we perform first-principles calculations using the mBJ method for bandgap correction. The results clearly demonstrate that the anisotropic dielectric characteristics can be directly attributed to the inherent anisotropy of p orbitals. More specifically, this prominent excitonic feature and fundamental bandgap are derived from the band-to-band transition between s and pz orbitals at the Γ-point.

Antibacterial Electrospun Membrane with Hierarchical Bead-on-String Structured Fibres for Wound Infections.

Chronic wounds often result in multiple infections with various kinds of bacteria and uncontrolled wound exudate, resulting in several healthcare issues. Advanced medicated nanofibres prepared by electrospinning have gained much attention for their topical application on infected chronic wounds. The objective of this work is to enhance the critical variables of ciprofloxacin-loaded polycaprolactone-silk sericin (PCL/SS-PVA-CIP) nanofibre production via the process of electrospinning. To examine the antibacterial effectiveness of PCL/SS-PVA-CIP nanocomposites, the material was tested against P. aeruginosa and S. aureus. The combination of PCL/SS-PVA-CIP exhibited potent inhibitory properties, with the most effective concentrations of ciprofloxacin (CIP) being 3 µg/g and 7.0 µg/g for each bacterium, respectively. The biocompatibility was evaluated by conducting cell reduction and proliferation studies using the human epidermal keratinocyte (HaCaT) cells and human gingival fibroblasts (HGFs) in vitro cell lines. The PCL/SS-PVA-CIP showed good cell compatibility with HaCaT and HGF cells, with effective proliferation even at antibiotic doses of up to 7.0 µg/g. The drug release effectiveness of the nanocomposites was assessed at various concentrations of CIP, resulting in a maximum cumulative release of 76.5% and 74.4% after 72 h for CIP concentrations of 3 µg/g and 7 µg/g, respectively. In summary, our study emphasizes the possibility of combining silk sericin (SS) and polycaprolactone (PCL) loading with CIP nanocomposite for wound management.

Quantitative characterization of agglomerate abrasion in a tumbling blender by using the Stokes number approach.

Removal of microcrystalline cellulose agglomerates in a dry-mixing system (lactose, 100 M) predominantly occurs via abrasion. The agglomerate abrasion rate potential is estimated by the Stokes abrasion (StAbr) number of the system. The StAbr number equals the ratio between the kinetic energy density of the moving powder bed and the work of fracture of the agglomerate. Basically, the StAbr number concept describes the blending condition of the dry-mixing system. The concept has been applied to investigate the relevance of process parameters on agglomerate abrasion in tumbling blenders. Here, process parameters such as blender rotational speed and relative fill volumes were investigated. In this study, the StAbr approach revealed a transition point between abrasion rate behaviors. Below this transition point, a blending condition exists where agglomerate abrasion is dominated by the kinetic energy density of the powder blend. Above this transition point, a blending condition exists where agglomerates show (undesirable) slow abrasion rates. In this situation, the blending condition is mainly determined by the high fill volume of the filler.

Periplaneta Americana Extract Ameliorates LPS-induced Acute Lung Injury Via Reducing Inflammation and Oxidative Stress.

OBJECTIVE: Acute lung injury (ALI) is an acute clinical syndrome characterized by uncontrolled inflammation response, which causes high mortality and poor prognosis. The present study determined the protective effect and underlying mechanism of Periplaneta americana extract (PAE) against lipopolysaccharide (LPS)-induced ALI. METHODS: The viability of MH-S cells was measured by MTT. ALI was induced in BALB/c mice by intranasal administration of LPS (5 mg/kg), and the pathological changes, oxidative stress, myeloperoxidase activity, lactate dehydrogenase activity, inflammatory cytokine expression, edema formation, and signal pathway activation in lung tissues and bronchoalveolar lavage fluid (BALF) were examined by H&E staining, MDA, SOD and CAT assays, MPO assay, ELISA, wet/dry analysis, immunofluorescence staining and Western blotting, respectively. RESULTS: The results revealed that PAE obviously inhibited the release of proinflammatory TNF-α, IL-6 and IL-1ß by suppressing the activation of MAPK/Akt/NF-κB signaling pathways in LPS-treated MH-S cells. Furthermore, PAE suppressed the neutrophil infiltration, permeability increase, pathological changes, cellular damage and death, pro-inflammatory cytokines expression, and oxidative stress upregulation, which was associated with its blockage of the MAPK/Akt/NF-κB pathway in lung tissues of ALI mice. CONCLUSION: PAE may serve as a potential agent for ALI treatment due to its anti-inflammatory and anti-oxidative properties, which correlate to the blockage of the MAPK/NF-κB and AKT signaling pathways.

Modified Coprecipitation Synthesis of Nickel-Rich NMC (Li1.0Ni0.6Mn0.2Co0.2O2) for Lithium-Ion Batteries: A Simple, Cost-Effective, Environmentally Friendly Method.

Lithium-ion batteries lay the foundation for satisfying the fast-growing demand of portable electronics and electric vehicles. However, due to the complexity of material syntheses, high fabrication temperature condition, and toxic gas emission, high volume manufacturing of lithium-ion batteries is still challenging. Here, we propose a modified coprecipitation method to synthesize Li1.0Ni0.6Mn0.2Co0.2O2 (NMC622-MCP) as a cathode material in a simple, cost-effective, and environmentally friendly approach. We demonstrate that the proposed method can be operated in a lower temperature environment, with respect to the requirement of conventional synthesis methods. Furthermore, only CO2 gas is emitted during synthesis. We also employed first-principles simulations to evaluate the crystallinity of the synthesized materials via X-ray diffractometer patterns. During charge/discharge processes, the obtained cathode materials induce outstanding electrochemical performance with a maximum specific capacity of up to 206.9 mAh g-1 at 0.05 C and a retention capacity of 83.22% after 100 cycles. Thus, the simple, cost-effective, environmentally friendly, and highly electrochemical performance of the newly acquired material envisages the modified coprecipitation method as a promising tool to manufacture cathode materials for lithium-ion batteries.

The role of nutritional risk evaluation in predicting adverse outcomes among patients with severe COVID-19 in Vietnam.

Introduction: As sufficient nutrition helps alleviate catabolic stress and modulate the systemic inflammatory response of the body, it plays an indispensable role in the good prognosis of critically ill patients. Thus, this study aimed to investigate the malnutrition of patients with severe COVID-19 and its association with adverse treatment outcomes. Methods: We conducted a retrospective cross-sectional study in two provincial hospitals in Hanoi from February to April 2022. Participants were patients with severe COVID-19 admitted to the Intensive Care Unit (ICU). Malnutrition risk were evaluated by Nutritional Risk Screening-2002 (NRS), Global Leadership Initiative on Malnutrition (GLIM), Prognostic Nutritional Index (PNI), and the adverse prognosis was assessed by Acute Physiology and Chronic Health Evaluation II (APACHE II). The multivariate receiver-operating characteristic (ROC) curve was applied to estimate the predictive ability of those criteria regarding worse treatment results. Results: The percentages of malnutrition measured by NRS, GLIM, PNI, and BMI were 62.6, 51.5, 42.9, and 16.6%, respectively. Patients with more severe malnutrition assessed by GLIM, PNI, and having above target fasting blood glucose (FBG) (≥10.0 mmol/L) were more likely to have higher APACHE scores. PNI had a better diagnostic performance than NRS and BMI (AUC = 0.84, 0.81, and 0.82, respectively). In addition, FBG revealed a good prognostic implication (AUC = 0.84). Conclusion: A relatively high percentage of patients experienced moderate and severe malnutrition regardless of screening tools. Individuals at higher risk of malnutrition and high FBG were predicted to have more adverse treatment outcomes. It is recommended that nutritional screening should be conducted regularly, and personalizing nutritional care strategies is necessary to meet patients' nutrient demands and prevent other nutrition-related complications.

Histamine-degrading halophilic bacteria from traditional fish sauce: Characterization of Virgibacillus campisalis TT8.5 for histamine reduction.

Traditionally produced fish sauce can contain significant amounts of histamine. In some instances, the histamine concentration may be well above the limit recommended by the Codex Alimentarius Commission. The aim of this study was to discover new bacterial strains capable of growing under the stressful environmental conditions of fish sauce fermentation and metabolizing histamine. In this study, 28 bacterial strains were isolated from Vietnamese fish sauce products based on their ability to grow at high salt concentrations (23% NaCl) and tested for their ability to degrade histamine. Strain TT8.5 showed the highest histamine-degradation (45.1 ± 0.2% of initially 5 mM histamine within 7 days) and was identified as Virgibacillus campisalis TT8.5. Its histamine-degrading activity was shown to be localized intracellularly and the enzyme is a putative histamine dehydrogenase. The strain exhibited optimal growth and histamine-degrading activity at 37°C, pH 7%, and 5% NaCl in halophilic archaea (HA) histamine broth. It also showed pronounced histamine-degrading activity in HA histamine broth when cultivated at temperatures of up to 40 °C as well as in the presence of up to 23% NaCl. After treatment with immobilized cells, 17.6-26.9% of the initial histamine in various fish sauce products were reduced within 24 h of incubation, while no significant changes in other parameters of fish sauce quality were observed after this treatment. Our results indicate that V. campisalis TT8.5 is of potential interest to be applied in histamine degradation of traditional fish sauce.

Chitinase from Bacillus licheniformis DSM13: expression in Lactobacillus plantarum WCFS1 and biochemical characterisation.

The gene chi, coding for a GH18 chitinase from the Gram-positive bacterium Bacillus licheniformis DSM13 (ATCC 14580), was cloned into the inducible lactobacillal expression vectors pSIP403 and pSIP409, derived from the sakacin-P operon of Lactobacillus sakei, and expressed in the host strain Lactobacillus plantarum WCFS1. Both the complete chi gene including the original bacillal signal sequence as well as the mature chi gene were compared, however, no extracellular chitinase activity was detected with any of the constructs. The chitinase gene was expressed intracellularly as an active enzyme with these different systems, at levels of approximately 5mg of recombinant protein per litre of cultivation medium. Results obtained for the two different expression vectors that only differ in the promoter sequence were well comparable. To further verify the suitability of this expression system, recombinant, His-tagged chitinase Chi was purified from cell extracts of L. plantarum and characterised. The monomeric 65-kDa enzyme can degrade both chitin and chitosan, and shows properties that are very similar to those reported for the native chitinase purified from other B. licheniformis isolates. It shows good thermostability (half lives of stability of 20 and 8.4 days at 37 and 50°C, respectively), and good stability in the pH range of 5-10. The results presented lead the way to overproduction of chitinase in a food-grade system, which is of interest for the food and feed industry.

Cellulose from the banana stem: optimization of extraction by response surface methodology (RSM) and charaterization.

Cellulose was extracted from the banana stem by chemical method and the factors affecting the extraction process such as concentration of NaOH and H2O2, as well as the assisted microwave time were investigated. Design-Expert software with Response Surface Methodology was used in the modeling and optimization of the cellulose extraction process. The results of XRD, FT-IR, SEM were also used to determine the physicochemical properties of cellulose obtained from the banana stem. The results of the modeling and optimization process of cellulose extraction showed the efficiency of the process and the high applicability of cellulose from the banana stem to create valuable industrial products.

Curcuminoid Co-Loading Platinum Heparin-Poloxamer P403 Nanogel Increasing Effectiveness in Antitumor Activity.

Nanosized multi-drug delivery systems provide synergistic effects between drugs and bioactive compounds, resulting in increased overall efficiency and restricted side effects compared to conventional single-drug chemotherapy. In this study, we develop an amphiphilic heparin-poloxamer P403 (HP403) nanogel that could effectively co-load curcuminoid (Cur) and cisplatin hydrate (CisOH) (HP403@CisOH@Cur) via two loading mechanisms. The HP403 nanogels and HP403@CisOH@Cur nanogels were closely analyzed with 1H-NMR spectroscopy, FT-IR spectroscopy, TEM, and DLS, exhibiting high stability in spherical forms. In drug release profiles, accelerated behavior of Cur and CisOH at pH 5.5 compared with neutral pH was observed, suggesting effective delivery of the compounds in tumor sites. In vitro studies showed high antitumor activity of HP403@CisOH@Cur nanogels, while in vivo assays showed that the dual-drug platform prolonged the survival time of mice and prevented tail necrosis. In summary, HP403@CisOH@Cur offers an intriguing strategy to achieve the cisplatin and curcumin synergistic effect in a well-designed delivery platform that increases antitumor effectiveness and overcomes undesired consequences caused by cisplatin in breast cancer treatment.