Predicting the dynamic impact behaviour of spray droplets on flat plant surfaces.

The dynamic impact behaviour of water droplets on plant surfaces was investigated based on a multiphase computational fluid dynamics (CFD) model. The study was conducted using the Volume Of Fluid (VOF) approach. The static contact angle of water droplets on leaf surfaces of different plants (apple, pear, leek and cabbage) was measured and found to vary between 54.9 and 138.2°. Impact experiments were conducted by monitoring the flow and impact characteristics of water droplets on leaves in still air with a high speed camera. Droplets were generated by an agricultural flat fan spray nozzle moving across the leaf at constant speed. The nozzle produced droplets with diameters ranging from 20.6 up to 550.8 µm, and droplet velocity values near the impact between 0.03 and 13.2 m s(-1). The CFD model was capable of predicting the observed dynamic impact behaviour of droplets on the plant surfaces. The fate of the droplets after the impact process for adhesion, bouncing or splashing was accurately predicted for Weber numbers (We) in the range of 0.007 to 1096 and droplet Reynolds numbers (Re) between 5 to 8000. The process was highly dependent on the surface and droplet flow characteristics during the impact. Combinations of We, Re and Ohnesorge (Oh) numbers defined the droplet maximum spread factor, the number of secondary droplets generated as a result of the splashing process and the transition between the different impact outcomes. These criteria can then be used in field scale spray deposition and drift models to better understand agricultural spray operations.

Wheat gluten structure and (non-)covalent network formation during deep-fat frying.

The aim of this work was to investigate wheat gluten protein network structure throughout the deep-frying process and evaluate its contribution to frying-induced micro- and macrostructure development. Gluten polymerization, gluten-water interactions, and molecular mobility were assessed as a function of the deep-frying time (0 - 180 s) for gluten-water model systems of differing hydration levels (40 - 60 % moisture content). Results showed that gluten protein extractability decreased considerably upon deep frying (5 s) mainly due to glutenin polymerization by disulfide covalent cross-linking. Stronger gliadin and glutenin protein-protein interactions were attributed to the formation of covalent linkages and evaporation of water interacting with protein chains. Longer deep-frying (> 60 s) resulted in progressively lower protein extractabilities, mainly due to the loss in gliadin protein extractability, which was associated with gliadin co-polymerization with glutenin by thiol-disulfide exchange reactions. The mobility of gluten polymers was substantially reduced during deep-frying (based on the lower T2 relaxation time of the proton fraction representing the non-exchanging protons of gluten) and gluten proteins gradually transitioned from the rubbery to the glassy state (based on the increased area of said protons). The sample volume during deep-frying was strongly correlated to the reduced protein extractability (r = -0.792, p < 0.001) and T2 relaxation time of non-exchanging protons of gluten proteins (r = -0.866, p < 0.001) thus demonstrating that the extent of gluten structural expansion as a result of deep-frying is dictated both by the polymerization of proteins and the reduction in their molecular mobility.

Microscale mechanisms of gas exchange in fruit tissue.

* Gas-filled intercellular spaces are considered the predominant pathways for gas transport through bulky plant organs such as fruit. Here, we introduce a methodology that combines a geometrical model of the tissue microstructure with mathematical equations to describe gas exchange mechanisms involved in fruit respiration. * Pear (Pyrus communis) was chosen as a model system. The two-dimensional microstructure of cortex tissue was modelled based on light microscopy images. The transport of O(2) and CO(2) in the intercellular space, cell wall network and cytoplasm was modelled using diffusion laws, irreversible thermodynamics and enzyme kinetics. * In silico analysis showed that O(2) transport mainly occurred through intercellular spaces and less through the intracellular liquid, while CO(2) was transported at equal rates in both phases. Simulations indicated that biological variation of the apparent diffusivity appears to be caused by the random distribution of cells and intercellular spaces in tissue. Temperature does not affect modelled gas exchange properties; it rather acts on the respiration metabolism. * This modelling approach provides, for the first time, detailed information about gas exchange mechanisms at the microscopic scale in bulky plant organs, such as fruit, and can be used to study conditions of anoxia.

High-throughput microplate enzymatic assays for fast sugar and acid quantification in apple and tomato.

In this article, we report on the use of miniaturized and automated enzymatic assays as an alternative technology for fast sugar and acid quantification in apples and tomatoes. Enzymatic assays for d-glucose, d-fructose, sucrose, D-sorbitol/xylitol, L-malic acid, citric acid, succinic acid, and L-glutamic acid were miniaturized from the standard 3 mL assays in cuvettes into assays of 200 microL or lower in 96 or 384 well microplates. The miniaturization and the automation were achieved with a four channel automatic liquid handling system in order to reduce the dispensing errors and to obtain an increased sample throughput. Performance factors (limit of detection, linearity of calibration curve, and repeatability) of the assays with standard solutions were proven to be satisfactory. The automated and miniaturized assays were validated with high-pressure liquid chromatography (HPLC) analyses for the quantification of sugars and acids in tomato and apple extracts. The high correlation between the two techniques for the different components indicates that the high-throughput microplate enzymatic assays can serve as a fast, reliable, and inexpensive alternative for HPLC as the standard analysis technique in the taste characterization of fruit and vegetables. In addition to the analysis of extracts, the high-throughput microplate enzymatic assays were used for the direct analysis of centrifuged and filtered tomato juice with an additional advantage that the sample preparation time and analysis costs are reduced significantly.

Validation of predictive growth models describing superatmospheric oxygen effects on Pseudomonas fluorescens and Listeria innocua on fresh-cut lettuce.

Two microbial growth models predicting the growth of Pseudomonas fluorescens and Listeria innocua at superatmospheric oxygen and carbon dioxide concentrations at 7 degrees C were validated on fresh-cut butterhead lettuce. Cut lettuce was inoculated with the same strain of L. innocua as the in vitro experiments. The P. fluorescens strain was tagged with a gene encoding green fluorescent protein (GFP) in order to distinguish the inoculated strain from contaminating Pseudomonaceae. Also growth of aerobic mesophilic and lactic acid bacteria was monitored during the experiments. The suggested P. fluorescens model was appropriate to predict growth on cut lettuce. L. innocua on the other hand, grew considerably slower under in vivo circumstances than predicted. CO(2) had a growth promoting effect on L. innocua growing on cut lettuce, whereas in vitro an inhibiting effect was observed. Validation parameters are calculated and hypotheses to explain the discrepancy between predicted and observed growth of L. innocua are provided.

Analysis of a novel class of predictive microbial growth models and application to coculture growth.

In this paper, a novel class of microbial growth models is analysed. In contrast with the currently used logistic type models (e.g., the model of Baranyi and Roberts [Baranyi, J., Roberts, T.A., 1994. A dynamic approach to predicting bacterial growth in food. International Journal of Food Microbiology 23, 277-294]), the novel model class, presented in Van Impe et al. (Van Impe, J.F., Poschet, F., Geeraerd, A.H., Vereecken, K.M., 2004. Towards a novel class of predictive microbial growth models. International Journal of Food Microbiology, this issue), explicitly incorporates nutrient exhaustion and/or metabolic waste product effects inducing stationary phase behaviour. As such, these novel model types can be extended in a natural way towards microbial interactions in cocultures and microbial growth in structured foods. Two illustrative case studies of the novel model types are thoroughly analysed and compared to the widely used model of Baranyi and Roberts. In a first case study, the stationary phase is assumed to be solely resulting from toxic product inhibition and is described as a function of the pH-evolution. In the second case study, substrate exhaustion is the sole cause of the stationary phase. Finally, a more complex case study of a so-called P-model is presented, dealing with a coculture inhibition of Listeria innocua mediated by lactic acid production of Lactococcus lactis.

Predictive modelling and validation of Listeria innocua growth at superatmospheric oxygen and carbon dioxide concentrations.

The effect of superatmospheric oxygen and carbon dioxide concentrations on the growth of Listeria innocua, which was used as a model organism for the pathogen Listeria monocytogenes, was evaluated. The bacteria were grown on a nutrient agar surface at 7 degrees C. Three carbon dioxide levels (0%, 12.5% and 25%) were combined with different levels of high oxygen concentrations (above 20%) based on a mixture design. The applied oxygen concentrations did not significantly influence the growth. High CO2 concentrations, on the contrary, reduced the maximum specific growth rate and prolonged the lag time. An overall model to describe the growth of L. innocua under high carbon dioxide conditions was constructed based on nine growth experiments, using a weighted one-step regression procedure. The influence of carbon dioxide on lag time and maximum specific growth rate was described using Ratkowsky-type models and inserted in the Baranyi equation. The model described the growth very well. To assess the validity of the model, 14 additional experiments were carried out. There was a good correlation of the model predictions and observed validation data.

Spectroscopic evaluation of the surface quality of apple.

Different spectroscopic techniques based on infrared and Raman were used to evaluate the natural wax and related surface quality of apple fruit. Transmission near-infrared (NIR) spectroscopy was applied to solutions of single wax components and extracted apple wax. Fourier transform infrared (FTIR) spectroscopy was used for transmission measurements of wax films on NaCl crystals, diffuse reflectance spectroscopy (DRIFTS) was used to analyze wax powders, and FT-Raman spectroscopy was explored to examine intact wax layers on whole fruit. The natural wax layers of apple fruit from a maximum of three different cultivars (Jonagold, Jonagored, and Elshof) from three picking dates (early, commercial, and late), three controlled atmosphere storage durations (0, 4, and 8 months), and three shelf life periods (0, 1, and 2 weeks) within each storage duration were examined. Canonical discriminant analysis was carried out on the first derivative NIR and FTIR spectra to describe the information contained in the spectra. Discrimination between cultivars and between storage duration based on wax layer properties was achieved with reasonable accuracy from both of the techniques. Information contained in the spectra of apples from different picking dates and shelf life periods was not significant. Differences between cultivars and storage periods in this analysis mostly related to differences in the number of aliphatic chains (e.g., alkanes and esters) and the presence of alpha-farnesene. No satisfactory results were obtained by means of Raman spectroscopy and DRIFTS.

Predictive microbiology in a dynamic environment: a system theory approach.

The main factors influencing the microbial stability of chilled prepared food products for which there is an increased consumer interest-are temperature, pH, and water activity. Unlike the pH and the water activity, the temperature may vary extensively throughout the complete production and distribution chain. The shelf life of this kind of foods is usually limited due to spoilage by common microorganisms, and the increased risk for food pathogens. In predicting the shelf life, mathematical models are a powerful tool to increase the insight in the different subprocesses and their interactions. However, the predictive value of the sigmoidal functions reported in the literature to describe a bacterial growth curve as an explicit function of time is only guaranteed at a constant temperature within the temperature range of microbial growth. As a result, they are less appropriate in optimization studies of a whole production and distribution chain. In this paper a more general modeling approach, inspired by system theory concepts, is presented if for instance time varying temperature profiles are to be taken into account. As a case study, we discuss a recently proposed dynamic model to predict microbial growth and inactivation under time varying temperature conditions from a system theory point of view. Further, the validity of this methodology is illustrated with experimental data of Brochothrix thermosphacta and Lactobacillus plantarum. Finally, we propose some possible refinements of this model inspired by experimental results.

Computer aided microbial safety design of food processes.

To reduce the time required for product development, to avoid expensive experimental tests, and to quantify safety risks for fresh products and the consequence of processing there is a growing interest in computer aided food process design. This paper discusses the application of hybrid object-oriented and rule-based expert system technology to represent the data and knowledge of microbial experts and food engineers. Finite element models for heat transfer calculation routines, microbial growth and inactivation models and texture kinetics are combined with food composition data, thermophysical properties, process steps and expert knowledge on type and quantity of microbial contamination. A prototype system has been developed to evaluate changes in food composition, process steps and process parameters on microbiological safety and textual quality of foods.

Inactivation of conidia of Botrytis cinerea and Monilinia fructigena using UV-C and heat treatment.

The effect of UV-C (lambda = 254 nm) and heat treatment was investigated on the inactivation of conidia of Botrytis cinerea and Monilinia fructigena, two major postharvest spoilage fungi of strawberries and cherries, respectively. Both fungi were grown at 21 degrees C in the dark and conidia were isolated after 1 week by washing the mycelium with a mild detergent solution. After filtration and resuspension in phosphate buffer to a titer of 10(5) to 10(6) cfu/ml, the conidia were subjected to different treatments. The applied UV-C doses varied from 0.01 to 1.50 J/cm2, and the conditions for the thermal treatment were 3, 5, 10, 15 and 20 min at temperatures ranging from 35 to 48 degrees C. Both techniques were applied individually and in combination. Spore inactivation increased with increasing intensity of single treatments. No surviving spores of B. cinerea were observed after 15 min at 45 degrees C or an UV-C treatment of 1.00 J/cm2. M. fructigena was more sensitive and a thermal treatment of 3 min at 45 degrees C or an UV-C treatment of 0.50 J/cm2 resulted in complete spore inactivation. Combination of both techniques reduced the required intensity of the treatment for inactivation of both fungi. The order of the applications had a significant effect on the degree of inactivation. The inactivation of B. cinerea conidia was greater when the heat treatment came first, and for M. fructigena, most inactivation was achieved when the heat treatment was preceded with an UV-C irradiation.

Using survival analysis to investigate the effect of UV-C and heat treatment on storage rot of strawberry and sweet cherry.

Ultraviolet light and heat treatment are proposed as alternative techniques for the use of chemicals to reduce the development of the spoilage fungi Botrytis cinerea and Monilinia fructigena on strawberry and sweet cherry, respectively, during storage. In order to investigate the effect of both physical techniques on microbial inactivation and on fruit quality, inoculated berries were subjected to different temperatures (40-48 degrees C) and UV-C doses (0.05-1.50 J/cm2). For each condition, 20 berries were used. After the treatment, fungal growth, visual damage (holes, stains) and fruit firmness were evaluated during a period of 10 days. The experimental data were analysed statistically using survival analysis techniques. Fungal growth on strawberries was significantly retarded using UV-C doses of 0.05 J/cm2 and higher. The same treatment had no significant effect when applied to cherries. The highest doses (1.00 and 1.50 J/cm2) had a negative effect on the calyx of the strawberry, causing browning and drying of the leaves. No beneficial effect of a low temperature treatment (40-48 degrees C) on the shelf life of strawberries was observed, but fungal development on cherries was retarded at temperatures of 45 and 48 degrees C. These temperatures caused severe damage on strawberries (soft stains, holes, decreased firmness), but had no influence on the quality of sweet cherries.

Combinations of pulsed white light and UV-C or mild heat treatment to inactivate conidia of Botrytis cinerea and Monilia fructigena.

The use of pulses of intense white light to inactivate conidia of the fungi Botrytis cinerea and Monilia fructigena, responsible for important economical losses during postharvest storage and transport of strawberries and sweet cherries, was investigated in this study. In the first stage, a light treatment applying pulses of 30 micros at a frequency of 15 Hz was investigated, resulting in a treatment duration varying from 1 to 250 s. The conidia of both fungi showed similar behaviour to pulsed light, with a maximal inactivation of 3 and 4 log units for B. cinerea and M. fructigena, respectively. The inactivation of the conidia increased with increasing treatment intensity, but no complete inactivation was achieved. The sigmoidal inactivation pattern obtained by the pulsed light treatment was described using a modification of the model of Geeraerd et al. [Int. J. Food Microbiol. 59 (2000) 185]. Hereto, the shoulder length was incorporated explicitly and relative values for the microbial populations were used. In the second stage, combinations of light pulses and ultraviolet-C or heat were applied. The UV light used in the experiments is the short-wave band or UV-C, running from 180 to 280 nm with a peak at 254 nm (UV-B runs from 280 to 320 nm and UV-A from 320 to 380 nm). The UV-C doses were 0.025, 0.05 and 0.10 J/cm(2), and the temperatures for the thermal treatment ranged from 35 to 45 degrees C during 3-15 min. When combining UV-C and light pulses, there was an increase in inactivation for both B. cinerea and M. fructigena, and synergism was observed. There was no effect of the order of the treatments. For the heat-light pulses combination, there was a difference between both fungi. The order of the treatments was highly significant for B. cinerea, but not for M. fructigena. Combining heat and light treatments improved the inactivation, and synergism between both methods was again observed. Complete inactivation of M. fructigena conidia was obtained after, e.g., a 40-s pulsed light treatment and 15 min at 41 degrees C, or after an 80-s light treatment and 10 min at 41 degrees C.

MRI and x-ray CT study of spatial distribution of core breakdown in 'Conference' pears.

Two non-destructive tomographic techniques, X-ray CT imaging and magnetic resonance imaging (MRI), were applied to study the development of core breakdown disorder in 'Conference' pears (Pyrus communis cv. Conference). This disorder, which is characterized by brown discoloration of the tissue and development of cavities, is induced by elevated CO(2) and decreased O(2) levels during controlled atmosphere storage. Tomographic images of pears stored for 10 months under disorder inducing conditions, were acquired with both techniques and compared to the actual slices. Both X-ray and MRI were able to differentiate between unaffected tissue, brown tissue and cavities. A simple image-processing program, based on threshold values, was developed to determine the area percentage of affected and unaffected tissue as well as the cavity and core area per slice. For all three imaging techniques the area percentage brown tissue per slice increased with the diameter of the pear, but was systematically underestimated by 12% and 6% for, respectively, X-ray and MRI, compared to the actual slices. The area percentage cavity corresponded very well for all techniques. It was also found that the contours of the brown tissue were parallel to the fruit boundaries, suggesting a relation between the disorder symptoms and gas diffusion properties of the fruit. It was concluded that MRI is the most appropriate technique to study the development of core breakdown disorder during postharvest storage in future experiments.

The metabolic response of cultured tomato cells to low oxygen stress.

The storage of fruits and vegetables under a controlled atmosphere can induce low oxygen stress, which can lead to post-harvest losses through the induction of disorders such as core breakdown and browning. To gain better understanding of the metabolic response of plant organs to low oxygen, cultured tomato cells (Lycopersicum esculentum) were used as a model system to study the metabolic stress response to low oxygen (0 and 1 kPa O2). By adding 13C labelled glucose, changes in the levels of polar metabolites and their 13C label accumulation were quantified. Low oxygen stress altered the metabolite profile of tomato cells, with the accumulation of the intermediates of glycolysis in addition to increases in lactate and sugar alcohols. 13C label data showed reduced label accumulation in almost all metabolites except lactate and some sugar alcohols. The results showed that low oxygen stress in tomato cell culture activated fermentative metabolism and sugar alcohol synthesis while inhibiting the activity of the TCA cycle and the biosynthesis of metabolites whose precursors are derived from central metabolism, including fluxes to most organic acids, amino acids and sugars.