Development of Phase-Separating Microfiber Network Hydrogels to Promote In Vitro Vascularization.

Engineered vascularized tissues in vitro exhibit the potential for transplantation therapy and disease modeling. Despite efforts to design hydrogels as cell culture platforms for in vitro vascularization, development of vascularized tissues recapitulating the natural structures and functions remains difficult due to a poor understanding of the relationships between the matrix microstructures and tube formation of endothelial cells. Herein, we developed microfiber network hydrogels with microporous structures by controlling the liquid-liquid phase separation (LLPS) of proteins and matrix structures in hydrogels. Extracellular matrix protein gelatin was modified with hydrogen-bonding moieties and mixed with hyaluronic acid sodium salt to form microfiber network structures. Gelatin gelation and hyaluronic acid sodium salt dissolution led to the formation of a microporous microfiber network hydrogel formation. Matrix structures of hydrogels were modified by controlling LLPS that affects endothelial cell tube formation. Vascularization was improved using laminin peptides and coculturing with mesenchymal stem cells. Overall, our approach exhibits the potential to induce in vitro vascularization for regenerative medicine and disease modeling applications.

Tissue-Adhesive Decellularized Extracellular Matrix Patches Reinforced by a Supramolecular Gelator to Repair Abdominal Wall Defects.

Implantation of surgical meshes composed of synthetic and biological materials has been applied for abdominal wall defect repair. Despite many efforts, there are no reliable meshes that fully satisfy clinical requirements because of their lack of biodegradability, mechanical strength, and tissue-adhesive properties. Here, we report biodegradable, decellularized extracellular matrix (dECM)-based biological patches to treat abdominal wall defects. By incorporating a water-insoluble supramolecular gelator that forms physical cross-linking networks through intermolecular hydrogen bonding, dECM patches were reinforced to improve mechanical strength. Reinforced dECM patches possessed higher tissue adhesion strength and underwater stability compared with the original dECM because of enhanced interfacial adhesion strength. In vivo experiments using an abdominal wall defect rat model showed that reinforced dECM patches induced collagen deposition and the formation of blood vessels during material degradation, and the accumulation of CD68-positive macrophages was suppressed compared to nonbiodegradable synthetic meshes. Tissue-adhesive and biodegradable dECM patches with improved mechanical strength by a supramolecular gelator have enormous potential for use in the repair of abdominal wall defects.

Effects of Sprayable, Highly Adhesive Hydrophobized Gelatin Microparticles on Endoscopic Submucosal Dissection: A Swine Model.

INTRODUCTION: Sprayable wound dressings containing hydrophobized microparticles (hMPs) are characterized by strong adhesiveness. We examined the effect of hMPs derived from Alaska pollock gelatin on endoscopic submucosal dissection (ESD) ulcers. METHODS: (1) In an in vivo model of miniature swine gastric ESD, gastric ulcers were created by ESD and then sprayed with hMPs or untreated followed by microscopic examination. (2) In an ex vivo ESD model of resected stomach, a pinhole-shaped perforation was created on the ESD ulcer of resected stomach; hMPs were then sprayed on the perforation; and air leakage and intragastric pressure were measured. (3) In an in vivo duodenal ESD model of miniature swine, duodenal artificial ESD ulcers with pinhole-shaped perforation were examined; ulcers were classified into hMPs-sprayed and nonsprayed groups, and inflammation in the intrinsic muscle layer and serosa were compared between the groups. RESULTS: (1) Histological observation of submucosal tissues showed a decreased number of invading inflammatory cells in hMP-sprayed tissues compared with the control in miniature swine gastric ESD (p < 0.05). In addition, the rates of anti-alpha smooth muscle actin and type I collagen positivity were significantly lower in the hMPs group than in the control group (p < 0.05). (2) Intragastric pressure could not be measured in the nonsprayed group, whereas no air leakage was observed in the sprayed group when pressurized up to 26 mm Hg in the resected stomach model. (3) The sprayed group showed suppressed inflammation of the intrinsic muscular layer and serosa in both cases compared with the nonsprayed group in miniature swine duodenal ESD (p < 0.05). CONCLUSIONS: Sprayable, tissue-adhesive hMPs are a promising medical material for intraoperative and postoperative treatment of ESD-induced wound via anti-inflammation and strong adhesiveness.

CXCL12 promotes CCR7 ligand-mediated breast cancer cell invasion and migration toward lymphatic vessels.

Chemokines are a family of cytokines that mediate leukocyte trafficking and are involved in tumor cell migration, growth, and progression. Although there is emerging evidence that multiple chemokines are expressed in tumor tissues and that each chemokine induces receptor-mediated signaling, their collaboration to regulate tumor invasion and lymph node metastasis has not been fully elucidated. In this study, we examined the effect of CXCL12 on the CCR7-dependent signaling in MDA-MB-231 human breast cancer cells to determine the role of CXCL12 and CCR7 ligand chemokines in breast cancer metastasis to lymph nodes. CXCL12 enhanced the CCR7-dependent in vitro chemotaxis and cell invasion into collagen gels at suboptimal concentrations of CCL21. CXCL12 promoted CCR7 homodimer formation, ligand binding, CCR7 accumulation into membrane ruffles, and cell response at lower concentrations of CCL19. Immunohistochemistry of MDA-MB-231-derived xenograft tumors revealed that CXCL12 is primarily located in the pericellular matrix surrounding tumor cells, whereas the CCR7 ligand, CCL21, mainly associates with LYVE-1+ intratumoral and peritumoral lymphatic vessels. In the three-dimensional tumor invasion model with lymph networks, CXCL12 stimulation facilitates breast cancer cell migration to CCL21-reconstituted lymphatic networks. These results indicate that CXCL12/CXCR4 signaling promotes breast cancer cell migration and invasion toward CCR7 ligand-expressing intratumoral lymphatic vessels and supports CCR7 signaling associated with lymph node metastasis.

Covering Post-Endoscopic Submucosal Dissection Ulcers in Miniature Swine with Hexanoyl (Hx:C6) Group-Modified Alkaline-Treated Gelatin Porous Film (HAG) Induces Proper Healing by Decreasing Inflammation and Fibrosis.

BACKGROUND AND AIMS: Hexanoyl (Hx:C6) group-modified alkaline-treated gelatin porous film (HAG) is a newly developed degradable hydrogel characterized by strong adhesiveness and high affinity for vascular endothelial growth factor (VEGF). The aim of this study was to clarify the effect of HAG sheets on the healing process of post-endoscopic submucosal dissection (ESD) porcine gastric artificial ulcers. METHODS: (1) To evaluate the adhesiveness of HAG sheets over time, we performed ESD to create 1 artificial ulcer and covered the lesion with 1 HAG sheet using 1 miniature swine. We observed 2 ulcers by endoscopic and microscopic examinations. (2) To examine the effect of HAG sheets on post-ESD ulcer healing, we performed ESD using 5 miniature swine. The artificial ulcers were covered with HAG sheets, or left uncovered after ESD (day 0), followed by macroscopic and microscopic examinations. On days 7 and 14, we observed 2 ulcers by endoscopic examinations. On day 14, the animals were sacrificed, and histological examination was performed on the 3 stomachs that could be extirpated. RESULTS: (1) On day 7, adhesion of HAG sheets was observed. (2) Gastric ulcer area on day 7 was significantly larger in the covered ulcers than in the non-covered ulcers (p = 0.046). On day 14, although there was no significant difference in ulcer area irrespective of covering (p = 0.357), the covered ulcers tended to repair less fold convergence than non-covered ulcers. The covered ulcer sheets significantly decreased inflammatory cell infiltration (p = 0.011), but significantly increased the abundance of macrophages (p = 0.033), in submucosal layers. Also, the abundance of alpha-smooth muscle actin-positive cells in submucosal layers of the covered ulcers was significantly reduced (p = 0.044), leading to a decrease in collagen accumulation. In addition, fibrosis and atrophy of the muscularis propria were significantly lower for covered ulcers than for non-covered ulcers. Furthermore, microvessels and VEGF-positive cells were significantly more abundant in the submucosal layers of the covered ulcers (p < 0.001 and p = 0.024, respectively). CONCLUSIONS: HAG sheets induced post-ESD ulcer healing with less submucosal inflammation and muscularis propria injury and have the potential to decrease excess scarring.

3D-Printing of Structure-Controlled Antigen Nanoparticles for Vaccine Delivery.

Targeted delivery of antigens to immune cells using micro/nanocarriers may serve as a therapeutic application for vaccination. However, synthetic carriers have potential drawbacks including cytotoxicity, low encapsulation efficiency of antigen, and lack of a morphological design, which limit the translation of the delivery system to clinical use. Here, we report a carrier-free and three-dimensional (3D)-shape-designed antigen nanoparticle by multiphoton lithography-based 3D-printing. This simple, versatile 3D-printing approach provides freedom for the precise design of particle shapes with a nanoscale resolution. Importantly, shape-designed antigen nanoparticles with distinct aspect ratios show shape-dependent immune responses. The 3D-printing approach for the rational design of nanomaterials with increasing safety, complexity, and efficacy offers an emerging platform to develop vaccine delivery systems and mechanistic understanding.

Multifunctional Hydrophobized Microparticles for Accelerated Wound Healing after Endoscopic Submucosal Dissection.

Endoscopic submucosal dissection (ESD) provides strong therapeutic benefits for early gastrointestinal cancer as a minimally invasive treatment. However, there is currently no reliable treatment to prevent scar contracture resulting from ESD which may lead to cicatricial stricture. Herein, a multifunctional colloidal wound dressing to promote tissue regeneration after ESD is demonstrated. This sprayable wound dressing, composed of hydrophobized microparticles, exhibits the multifunctionality necessary for wound healing including tissue adhesiveness, blood coagulation, re-epithelialization, angiogenesis, and controlled inflammation based on hydrophobic interaction with biological systems. An in vivo feasibility study using swine gastric ESD models reveals that this colloidal wound dressing suppresses fibrosis and accelerates wound healing. Multifunctional colloidal and sprayable wound dressings have an enormous therapeutic potential for use in a wide range of biomedical applications including accelerated wound healing after ESD, prevention of perforation, and the treatment of inflammatory diseases.

Osteoclast-Responsive, Injectable Bone of Bisphosphonated-Nanocellulose that Regulates Osteoclast/Osteoblast Activity for Bone Regeneration.

An injectable bone may serve as a minimally invasive therapy for large orthopedic defects and osteoporosis and an alternative to allografting and surgical treatment. However, conventional bone substitutes lack the desirable biodegradability, bioresponsibility, and functionality to regulate the bone regeneration process. Here, we report an injectable, bioresponsive bone composed of bisphosphonate-modified nanocellulose (pNC) as a bone substitute for bone regeneration. Composites composed of nanofibrillated cellulose and ß-tricalcium phosphate (ß-TCP) mimic bone structures in which apatite reinforces collagen fibrils. Bisphosphonate groups on nanocellulose provide reversible, physical cross-linking with ß-TCP, apatite formation, binding property to bone, and pH responsiveness. When the pH drops to ∼4.5, which corresponds to an osteoclast-induced pH decrease, pNC-ß-TCP composite degrades and releases pNC. pNC suppresses osteoclast formation and pit formation. This osteoclast-responsive property allows for controlling the degradation rate of the composite. Moreover, the composite of pNC, α-tricalcium phosphate (α-TCP), and ß-TCP enhances osteoblast differentiation. This injectable bone substitute of pNC that regulates osteoclast/osteoblast activity has enormous potential for the treatment of bone diseases and prevention of locomotive syndrome.

Basement Membrane Mimics of Biofunctionalized Nanofibers for a Bipolar-Cultured Human Primary Alveolar-Capillary Barrier Model.

In vitro reconstruction of an alveolar barrier for modeling normal lung functions and pathological events serve as reproducible, high-throughput pharmaceutical platforms for drug discovery, diagnosis, and regenerative medicine. Despite much effort, the reconstruction of organ-level alveolar barrier functions has failed due to the lack of structural similarity to the natural basement membrane, functionalization with specific ligands for alveolar cell function, the use of primary cells and biodegradability. Here we report a bipolar cultured alveolar-capillary barrier model of human primary cells supported by a basement membrane mimics of fully synthetic bifunctional nanofibers. One-step electrospinning process using a bioresorbable polyester and multifunctional star-shaped polyethylene glycols (sPEG) enables the fabrication of an ultrathin nanofiber mesh with interconnected pores. The nanofiber mesh possessed mechanical stability against cyclic expansion as seen in the lung in vivo. The sPEGs as an additive provide biofunctionality to fibers through the conjugation of peptide to the nanofibers and hydrophilization to prevent unspecific protein adsorption. Biofunctionalized nanofiber meshes facilitated bipolar cultivation of endothelial and epithelial cells with fundamental alveolar functionality and showed higher permeability for molecules compared to microporous films. This nanofiber mesh for a bipolar cultured barrier have the potential to promote growth of an organ-level barrier model for modeling pathological conditions and evaluating drug efficacy, environmental pollutants, and nanotoxicology.

Construction and myogenic differentiation of 3D myoblast tissues fabricated by fibronectin-gelatin nanofilm coating.

In this study, we used a recently developed approach of coating the cells with fibronectin-gelatin nanofilms to build 3D skeletal muscle tissue models. We constructed the microtissues from C2C12 myoblasts and subsequently differentiated them to form muscle-like tissue. The thickness of the constructs could be successfully controlled by altering the number of seeded cells. We were able to build up to ∼76 µm thick 3D constructs that formed multinucleated myotubes. We also found that Rho-kinase inhibitor Y27632 improved myotube formation in thick constructs. Our approach makes it possible to rapidly form 3D muscle tissues and is promising for the in vitro construction of physiologically relevant human skeletal muscle tissue models.

3D-fibroblast tissues constructed by a cell-coat technology enhance tight-junction formation of human colon epithelial cells.

Caco-2, human colon carcinoma cell line, has been widely used as a model system for intestinal epithelial permeability because Caco-2 cells express tight-junctions, microvilli, and a number of enzymes and transporters characteristic of enterocytes. However, the functional differentiation and polarization of Caco-2 cells to express sufficient tight-junctions (a barrier) usually takes over 21 days in culture. This may be due to the cell culture environment, for example inflammation induced by plastic petri dishes. Three-dimensional (3D) sufficient cell microenvironments similar to in vivo natural conditions (proteins and cells), will promote rapid differentiation and higher functional expression of tight junctions. Herein we report for the first time an enhancement in tight-junction formation by 3D-cultures of Caco-2 cells on monolayered (1L) and eight layered (8L) normal human dermal fibroblasts (NHDF). Trans epithelial electric resistance (TEER) of Caco-2 cells was enhanced in the 3D-cultures, especially 8L-NHDF tissues, depending on culture times and only 10 days was enough to reach the same TEER value of Caco-2 monolayers after a 21 day incubation. Relative mRNA expression of tight-junction proteins of Caco-2 cells on 3D-cultures showed higher values than those in monolayer structures. Transporter gene expression patterns of Caco-2 cells on 3D-constructs were almost the same as those of Caco-2 monolayers, suggesting that there was no effect of 3D-cultures on transporter protein expression. The expression correlation between carboxylesterase 1 and 2 in 3D-cultures represented similar trends with human small intestines. The results of this study clearly represent a valuable application of 3D-Caco-2 tissues for pharmaceutical applications.

Enhanced ROS scavenging and tissue adhesive abilities in injectable hydrogels by protein modification with oligoethyleneimine.

Postsurgical treatment comprehensively benefits from the application of tissue-adhesive injectable hydrogels, which reduce postoperative complications by promoting wound closure and tissue regeneration. Although various hydrogels have been employed as clinical tissue adhesives, many exhibit deficiencies in adhesive strength under wet conditions or in immunomodulatory functions. Herein, we report the development of reactive oxygen species (ROS) scavenging and tissue-adhesive injectable hydrogels composed of polyamine-modified gelatin crosslinked with the 4-arm poly (ethylene glycol) crosslinker. Polyamine-modified gelatin was particularly potent in suppressing the secretion of proinflammatory cytokines from stimulated primary macrophages. This effect is attributed to its ability to scavenge ROS and inhibit the nuclear translocation of nuclear factor kappa-B. Polyamine-modified gelatin-based hydrogels exhibited ROS scavenging abilities and enhanced tissue adhesive strength on collagen casing. Notably, the hydrogel demonstrated exceptional tissue adhesive properties in a wet environment, as evidenced by its performance using porcine small intestine tissue. This approach holds significant promise for designing immunomodulatory hydrogels with superior tissue adhesion strength compared to conventional medical materials, thereby contributing to advancements in minimally invasive surgical techniques.

Improved hydration property of tissue adhesive/hemostatic microparticle based on hydrophobically-modified Alaska pollock gelatin.

The management of bleeding is an important aspect of endoscopic surgery to avoid excessive blood loss and minimize pain. In clinical settings, sprayable hemostatic particles are used for their easy delivery, adaptability to irregular shapes, and rapid hydration. However, conventional hemostatic particles present challenges associated with tissue adhesion. In a previous study, we reported tissue adhesive microparticles (C10-sa-MPs) derived from Alaska pollock gelatin modified with decyl groups (C10-sa-ApGltn) using secondary amines as linkages. The C10-sa-MPs adhere to soft tissues through a hydration mechanism. However, their application as a hemostatic agent was limited by their long hydration times, attributed to their high hydrophobicity. In this study, we present a new type microparticle, C10-am-MPs, synthesized by incorporating decanoyl group modifications into ApGltn (C10-am-ApGltn), using amide bonds as linkages. C10-am-MPs exhibited enhanced hydration characteristics compared to C10-sa-MPs, attributed to superior water absorption facilitated by amide bonds rather than secondary amines. Furthermore, C10-am-MPs demonstrated comparable tissue adhesion properties and underwater adhesion stability to C10-sa-MPs. Notably, C10-am-MPs exhibited accelerated blood coagulation in vitro compared to C10-sa-MPs. The application of C10-am-MPs in an in vivo rat liver hemorrhage model resulted in a hemostatic effect comparable to a commercially available hemostatic particle. These findings highlight the potential utility of C10-am-MPs as an effective hemostatic agent for endoscopic procedures and surgical interventions.

Injectable microcapillary network hydrogels engineered by liquid-liquid phase separation for stem cell transplantation.

Injectable hydrogels are promising carriers for cell delivery in regenerative medicine. However, injectable hydrogels composed of crosslinked polymer networks are often non-microporous and prevent biological communication with host tissues through signals, nutrients, oxygen, and cells, thereby limiting graft survival and tissue integration. Here we report injectable hydrogels with liquid-liquid phase separation-induced microcapillary networks (µCN) as stem cell-delivering scaffolds. The molecular modification of gelatin with hydrogen bonding moieties induced liquid-liquid phase separation when mixed with unmodified gelatin to form µCN structures in the hydrogels. Through spatiotemporally controlled covalent crosslinking and dissolution processes, porous µCN structures were formed in the hydrogels, which can enhance mass transport and cellular activity. The encapsulation of cells with injectable µCN hydrogels improved cellular spreading, migration, and proliferation. Transplantation of mesenchymal stem cells with injectable µCN hydrogels enhanced graft survival and recovered hindlimb ischemia by enhancing material-tissue communication with biological signals and cells through µCN. This facile approach may serve as an advanced scaffold for improving stem cell transplantation therapies in regenerative medicine.

Elucidation of prognostic factors in the acute phase of feline severe fever with thrombocytopenia syndrome virus infection.

Severe fever with thrombocytopenia syndrome (SFTS) is a potentially fatal tick-borne zoonotic disease, endemic to Asian regions, including western Japan. Cats appear to suffer a particularly severe form of the disease; however, feline SFTS is not clinically well characterized. Accordingly, in this study, we investigated the associations of, demographic, hematological and biochemical, immunological, and virological parameters with clinical outcome (fatal cases vs. survivors) in SFTSV-positive cats. Viral genomic analysis was also performed. Viral load in blood, total bilirubin, creatine phosphokinase, serum amyloid A, interleukin-6, tumor necrotic factor-α, and virus-specific IgM and IgG differed significantly between survivors and fatal cases, and thus may have utility as prognosticators. Furthermore, survivor profiling revealed high-level of viremia with multiple parameters (white blood cells, platelet, total bilirubin, glucose, and serum amyloid A) beyond the reference range in the 7-day acute phase, and signs of clinical recovery in the post-acute phase (parameters returning to, or tending toward, the reference range). However, SFTSV was still detectable from some survived cats even 14 days after onset of disease, indicating the risk of infection posed by close-contact exposure may persist through the post-acute phase. This study provides useful information for prognostic assessments of acute feline SFTS, and may contribute to early treatment plans for cats with SFTS. Our findings also alert pet owners and animal health professionals to the need for prolonged vigilance against animal-to-human transmission when handling cats that have been diagnosed with SFTS.

Sprayable tissue adhesive microparticle-magnetic nanoparticle composites for local cancer hyperthermia.

Incomplete removal of early-stage gastrointestinal cancers by endoscopic treatments often leads to recurrence induced by residual cancer cells. To completely remove or kill cancer tissues and cells and prevent recurrence, chemotherapy, radiotherapy, and hyperthermia using biomaterials with drugs or nanomaterials are usually administered following endoscopic treatments. However, there are few biomaterials that can be applied using endoscopic devices to locally kill cancer tissues and cells. We previously reported that decyl group-modified Alaska pollock gelatin-based microparticles (denoted C10MPs) can adhere to gastrointestinal tissues under wet conditions through the formation of a colloidal gel driven by hydrophobic interactions. In this study, we combined C10MPs with superparamagnetic iron oxide nanoparticles (SPIONs) to develop a sprayable heat-generating nanomaterial (denoted SP/C10MP) for local hyperthermia of gastrointestinal cancers. The rheological property, tissue adhesion strength, burst strength, and underwater stability of SP/C10MP were improved through decyl group modification and SPION addition. Moreover, SP/C10MP that adhered to gastrointestinal tissues formed a colloidal gel, which locally generated heat in response to an alternating magnetic field. SP/C10MP successfully killed cancer tissues and cells in colon cancer-bearing mouse models in vitro and in vivo. Therefore, SP/C10MP has the potential to locally kill residual cancer tissues and cells after endoscopic treatments.

Inflammation-targeting polyamine nanomedicines for the treatment of ulcerative colitis.

Inflammatory bowel disease (IBD) is a chronic inflammatory disorder characterized by immune system dysfunction. Despite the availability of various anti-inflammatory drugs, they exhibit low therapeutic efficacy with systemic side effects. In this study, we developed oral anti-inflammatory polyamine-based nanomedicines for the treatment of ulcerative colitis. Polyamine-bearing nanoparticles were prepared by the self-assembly of hyaluronic acid in organic solvents and crosslinking with branched oligoethyleneimine. Polyamine nanoparticles were found to suppress excessive inflammatory responses by scavenging the reactive oxygen species (ROS). Moreover, these nanoparticles inhibited enzymatic degradation and targeting of inflamed intestinal tissues. Additionally, they suppressed the inflammatory responses and recovered the pathological disorders in the colon of an ulcerative colitis mouse model. Therefore, polyamine-based nanomedicines exhibit great potential as biocompatible ROS-scavenging drugs for the treatment of IBD.

Effect of particle size on the tissue adhesion and particle floatation of a colloidal wound dressing for endoscopic treatments.

Endoscopic submucosal dissection (ESD) is a minimally invasive technique that is widely used to remove gastrointestinal tumors. However, because the walls of the duodenum and large intestine are thin, perforation can easily occur after ESD. We have previously reported that alkyl group-modified Alaska pollock gelatin-based microparticles (C10Ps) formed a colloidal gel that could adhere to defects and close perforations, driven by hydrophobic interactions. The present study focused on the effect of particle size on the colloidal gel properties and the floatation of C10Ps in the air in the delivery of C10Ps. We prepared C10Ps with different particle sizes from 0.1 to 100 µm. The storage modulus and adhesion strength of the C10P colloidal gel increased with decreasing particle size. All the C10Ps formed a colloidal gel layer on duodenum tissue after being sprayed from an endoscopic device. The underwater stability and burst strength of C10Ps with a particle size of 0.1 and 1 µm were higher than for larger C10Ps. Floating of the small-sized C10Ps in the air was observed. The results indicated that C10Ps with a size of 1 µm had suitable properties for use in endoscopic treatments. STATEMENT OF SIGNIFICANCE: We previously reported tissue adhesive microparticles as a spray-deliverable wound dressing in gastrointestinal tissues. However, their functions depending on particle size have not yet been clarified. In the present study, we prepared decyl group-modified Alaska pollock gelatin nano and microparticles (C10Ps) with different particle sizes from 0.1 to 100 µm and evaluated the effect of particle size on the colloidal gel properties (rheological property, underwater stability and perforation-closing ability) and the floatation of C10Ps in the air in the delivery of C10Ps.

Improved Swelling Property of Tissue Adhesive Hydrogels Based on α-Cyclodextrin/Decyl Group-Modified Alaska Pollock Gelatin Inclusion Complexes.

Adhesives/sealants are used after suturing to prevent leakage of cerebrospinal fluid from an anastomotic site. Commercial adhesives/sealants have been used to close the cerebral dura. However, swelling of the cured adhesives/sealants induces increased intracranial pressure and decreases the strength of the seal. In the present study, tissue adhesive hydrogels with improved swelling property using inclusion complex composed of α-cyclodextrin (αCD) and decyl group (C10)-modified Alaska pollock-derived gelatin (C10-ApGltn) with a high degree of substitution (DS) (>20 mol%) are developed. Viscosity of C10-ApGltn with a high DS solution remarkably decreased by the addition of αCD. The resulting αCD/C10-ApGltn adhesive hydrogel composed of αCD/C10-ApGltn inclusion complexes and poly(ethylene glycol) (PEG)-based crosslinker showed improved swelling property after immersion in saline. Also, the resulting adhesive has a significantly higher burst strength than fibrin-based adhesives and is as strong as a PEG-based adhesive. Quantitative analysis of αCD revealed that the improved swelling property of the resulting adhesive hydrogels is induced by the release of αCD from cured adhesive, and the subsequent assembly of decyl groups in the saline. These results suggest that adhesives developed using the αCD/C10-ApGltn inclusion complex can be useful for closing the cerebral dura mater.

Engineering thixotropic supramolecular gelatin-based hydrogel as an injectable scaffold for cell transplantation.

Despite many efforts focusing on regenerative medicine, there are few clinically-available cell-delivery carriers to improve the efficacy of cell transplantation due to the lack of adequate scaffolds. Herein, we report an injectable scaffold composed of functionalized gelatin for application in cell transplantation. Injectable functionalized gelatin-based hydrogels crosslinked with reversible hydrogen bonding based on supramolecular chemistry were designed. The hydrogel exhibited thixotropy, enabling single syringe injection of cell-encapsulating hydrogels. Highly biocompatible and cell-adhesive hydrogels provide cellular scaffolds that promote cellular adhesion, spreading, and migration. Thein vivodegradation study revealed that the hydrogel gradually degraded for seven days, which may lead to prolonged retention of transplanted cells and efficient integration into host tissues. In volumetric muscle loss models of mice, cells were transplanted using hydrogels and proliferated in injured muscle tissues. Thixotropic and injectable hydrogels may serve as cell delivery scaffolds to improve graft survival in regenerative medicine.