Application of transition-edge sensors for micro-X-ray fluorescence measurements and micro-X-ray absorption near edge structure spectroscopy: a case study of uranium speciation in biotite obtained from a uranium mine.

In this study, we successfully applied a transition-edge sensor (TES) spectrometer as a detector for microbeam X-ray measurements from a synchrotron X-ray light source in the hard X-ray region to determine uranium (U) distribution at the micro-scale and its chemical species in biotite obtained from a U mine. It is difficult to separate the fluorescent X-ray of the U Lα1 line at 13.615 keV from that of the Rb Kα line at 13.395 keV in the X-ray fluorescence spectrum with an energy resolution of approximately 220 eV using a conventional silicon drift detector (SDD). Meanwhile, the fluorescent X-rays of U Lα1 and Rb Kα were fully separated by a TES with 50 eV energy resolution at an energy of around 13 keV. The successful peak separation by the TES led to an accurate mapping analysis of trace U in micro-X-ray fluorescence measurements and a decrease in the signal-to-background ratio in micro-X-ray absorption near edge structure spectroscopy. Thus, it could be a powerful tool for studying the U distribution and speciation in various environmental samples.

Oxidation and phase transfer of individual Cr-doped dendritic FeOx particles visualized by full-field nano-XAFS spectroimaging.

Iron oxides with various compositions and polymorphs have been widely used as compounds that require reversible redox properties, such as catalysts. However, partial decomposition during phase transitions often causes irreversible degradation of the redox properties of iron oxides. Cr doping into the crystalline framework of iron oxide dendrites improves the stability of the structural transformation of iron oxides. We spatially visualized the FeOx-dendrite phase distribution during oxidation in crystalline dendritic FeOx and Cr-FeOx particles by full-field nano-X-ray absorption fine structure spectroimaging. The spectroimaging visualized propagation in the phase transitions in the individual FeOx particles and changes in the phase transition behaviors of the Cr-FeOx particles. The statistical analysis of the spectroimaging data revealed the phase transition trends in parts of the FeOx and Cr-FeOx particles in three Fe density zones (particle thicknesses) and the probability densities of the phase proportions in the dendrites.

Thermal stability of crown-motif [Au9(PPh3)8]3+ and [MAu8(PPh3)8]2+ (M = Pd, Pt) clusters: Effects of gas composition, single-atom doping, and counter anions.

The thermal behaviors of ligand-protected metal clusters, [Au9(PPh3)8]3+ and [MAu8(PPh3)8]2+ (M = Pd, Pt) with a crown-motif structure, were investigated to determine the effects of the gas composition, single-atom doping, and counter anions on the thermal stability of these clusters. We successfully synthesized crown-motif [PdAu8(PPh3)8][HPMo12O40] (PdAu8-PMo12) and [PtAu8(PPh3)8][HPMo12O40] (PtAu8-PMo12) salts with a cesium-chloride-type structure, which is the same as the [Au9(PPh3)8][PMo12O40] (Au9-PMo12) structure. Thermogravimetry-differential thermal analysis/mass spectrometry analysis revealed that the crown-motif structure of Au9-PMo12 was decomposed at ∼475 K without weight loss to form Au nanoparticles. After structural decomposition, the ligands were desorbed from the sample. The ligand desorption temperature of Au9-PMo12 increased under 20% O2 conditions because of the formation of Au nanoparticles and stronger interaction of the formed O=PPh3 than PPh3. The Pd and Pt single-atom doping improved the thermal stability of the clusters. This improvement was due to the formation of a large bonding index of M-Au and a change in Au-PPh3 bonding energy by heteroatom doping. Moreover, we found that the ligand desorption temperatures were also affected by the type of counter anions, whose charge and size influence the localized Coulomb interaction and cluster packing between the cationic ligand-protected metal clusters and counter anions.

Quantitative evaluation of the intratumoral distribution of platinum in oxaliplatin-treated rectal cancer: In situ visualization of platinum via synchrotron radiation X-ray fluorescence spectrometry.

Oxaliplatin (l-OHP), a platinum-based drug, is a key chemotherapeutic agent for colorectal cancer (CRC), but drug resistance and toxic effects have been major limitations of its use. Synchrotron radiation X-ray fluorescence spectrometry (SR-XRF) is a rapid, nondestructive technique for monitoring the distribution of metals and trace elements in cells or tissue samples. We applied SR-XRF to visualize the distribution of platinum and other elements in 30 rectal cancer specimens resected from patients who received l-OHP-based preoperative chemotherapy and quantified platinum concentration in the tumor epithelium and stroma, respectively, using calibration curves. The platinum concentration in rectal cancer tissue ranged 2.85-11.44 ppm, and the detection limit of platinum was 1.848 ppm. In the tumor epithelium, the platinum concentration was significantly higher in areas of degeneration caused by chemotherapy than in nondegenerated area (p < 0.001). Conversely, in the tumor stroma, the platinum concentration was significantly higher in patients with limited therapeutic responses than in those with strong therapeutic responses (p < 0.001). Furthermore, multivariate analysis illustrated that higher platinum concentration in the tumor stroma was an independent predictive factor of limited histologic response (odds ratio; 19.99, 95% confidence interval; 2.04-196.37, p = 0.013). This is the first study to visualize and quantify the distribution of platinum in human cancer tissues using SR-XRF. These results suggest that SR-XRF analysis may contribute to predicting the therapeutic effect of l-OHP-based chemotherapy by quantifying the distribution of platinum.

Surface Freezing of Cetyltrimethylammonium Chloride-Hexadecanol Mixed Adsorbed Film at Dodecane-Water Interface.

The surface freezing transition of a mixed adsorbed film containing cetyltrimethylammonium chloride (CTAC) and n-hexadecanol (C16OH) was utilized at the dodecane-water interface to control the stability of oil-in-water (O/W) emulsions. The corresponding surface frozen and surface liquid mixed adsorbed films were characterized using interfacial tensiometry and X-ray reflectometry. The emulsion samples prepared in the temperature range of the surface frozen and surface liquid phases showed a clear difference in their stability: the emulsion volume decreased continuously right after the emulsification in the surface liquid region, while it remained constant or decreased at a much slower rate in the surface frozen region. Compared to the previously examined CTAC-tetradecane mixed adsorbed film, the surface freezing temperature increased from 9.5 to 25.0 °C due to the better chain matching between CTAC and C16OH and higher surface activity of C16OH. This then renders such systems much more attractive for practical applications.

Formation of an Intermediate Valence Icosahedral Quasicrystal in the Au-Sn-Yb System.

We report on the formation of a new icosahedral quasicrystal (iQC) in the Au-Sn-Yb alloy system. This iQC has a primitive icosahedral lattice with a lattice constant aico of 0.5447(7) nm and a composition that was determined to be Au60.0Sn26.7Yb13.3. X-ray absorption spectroscopy measurement of the near Yb L3 edge demonstrates that the Yb valence in the iQC is an intermediate valence between divalent (4f14) and trivalent (4f13) at ambient pressure and was determined to be 2.18+. The results are compared to those for a corresponding 2/1 cubic approximant crystal. The formation of this new iQC is discussed in terms of the atomic size factor (δ) and the valence electron-to-atom ratio (e/a).

Dynamic Behavior of Rh Species in Rh/Al2O3 Model Catalyst during Three-Way Catalytic Reaction: An Operando X-ray Absorption Spectroscopy Study.

The dynamic behavior of Rh species in 1 wt% Rh/Al2O3 catalyst during the three-way catalytic reaction was examined using a micro gas chromatograph, a NOx meter, a quadrupole mass spectrometer, and time-resolved quick X-ray absorption spectroscopy (XAS) measurements at a public beamline for XAS, BL01B1 at SPring-8, operando. The combined data suggest different surface rearrangement behavior, random reduction processes, and autocatalytic oxidation processes of Rh species when the gas is switched from a reductive to an oxidative atmosphere and vice versa. This study demonstrates an implementation of a powerful operando XAS system for heterogeneous catalytic reactions and its importance for understanding the dynamic behavior of active metal species of catalysts.

Disappearance of the Superionic Phase Transition in Sub-5 nm Silver Iodide Nanoparticles.

Bulk silver iodide (AgI) is known to show a phase transition from the poorly conducting ß/γ-phases into the superionic conducting α-phase at 147 °C. Its transition temperature decreases with decreasing the size of AgI, and the α-phase exists stably at 37 °C in AgI nanoparticles with a diameter of 6.3 nm. In this Letter, we investigated the atomic configuration, the phase transition behavior, and the ionic conductivity of AgI nanoparticles with a diameter of 3.0 nm. The combination of pair distribution function (PDF) analysis and reverse Monte Carlo (RMC) modeling based on high-energy X-ray diffraction (XRD) revealed for the first time that they formed the ß/γ-phases with atomic disorder. The results of extended X-ray absorption fine structure (EXAFS) analysis, differential scanning calorimetry (DSC), and AC impedance spectroscopy demonstrated that they did not exhibit the superionic phase transition and their ionic conductivity was lower than that of crystalline AgI. The disappearance of the superionic phase transition and low ionic conductivity in the very small AgI nanoparticles originates from their small size and disordered structure.

Local structure around In atoms in coherently grown m-plane InGaN film.

The local structure around In atoms in an m-plane In0.06Ga0.94N film coherently grown on a freestanding m-plane GaN substrate was investigated by polarization-dependent X-ray absorption fine-structure. A step-by-step fitting procedure was proposed for the m-plane wurtzite structure. The interatomic distance for the first nearest neighbour In-N atomic pairs was almost isotropic. For the second nearest In-Ga pairs, the interatomic distances along the m- and a-axes were longer and shorter, respectively, than that in strain-free virtual crystals as expected for the m-plane compressive strain. In contrast, the In-Ga interatomic distance in the c-direction was elongated in spite of the compressive strain, which was explained in terms of the anisotropic atomic structure on the m-plane. The local strain in the m-plane film was more relaxed than that in coherently grown c-plane single quantum wells. A few In atoms were atomically localized in all directions, and thus localized excitonic emission is expected as in the case of c-plane InGaN.

Suppressing Isomerization of Phosphine-Protected Au9 Cluster by Bond Stiffening Induced by a Single Pd Atom Substitution.

The fluxional nature of small gold clusters has been exemplified by reversible isomerization between [Au9(PPh3)8]3+ with a crown motif (Au9(C)) and that with a butterfly motif (Au9(B)) induced by association and dissociation with compact counteranions (NO3-, Cl-). However, structural isomerization was suppressed by substitution of the central Au atom of the Au9 core in [Au9(PPh3)8]3+ with a Pd atom: [PdAu8(PPh3)8]2+ with a crown motif (PdAu8(C)) did not isomerize to that with a butterfly motif (PdAu8(B)) upon association with the counteranions. Density functional theory calculation showed that the energy difference between PdAu8(C) and PdAu8(B) is comparable to that between Au9(C) and Au9(B), indicating that the relative stabilities of the isomers are not a direct cause for the suppression of isomerization. Temperature dependence of Debye-Waller factors obtained by X-ray absorption fine-structure analysis revealed that the intracluster bonds of PdAu8(C) were stiffer than the corresponding bonds in Au9(C). Natural bond orbital analysis suggested that the radial Pd-Au and lateral Au-Au bonds in PdAu8(C) are stiffened due to the increase in the ionic nature and decrease in electrostatic repulsion between the surface Au atoms, respectively. We conclude that the formation of stiffer metal-metal bonds by Pd atom doping inhibits the isomerization from PdAu8(C) to PdAu8(B).

Atomic scattering factor of the ASTRO-H (Hitomi) SXT reflector around the gold's L edges.

The atomic scattering factor in the energy range of 11.2-15.4 keV for the ASTRO-H Soft X-ray Telescope (SXT) is reported. The large effective area of the SXT makes use of photon spectra above 10 keV viable, unlike most other X-ray satellites with total-reflection mirror optics. Presence of gold's L-edges in the energy band is a major issue, as it complicates the function of the effective area. In order to model the area, the reflectivity measurements in the 11.2-15.4 keV band with the energy pitch of 0.4 - 0.7 eV were made in the synchrotron beam-line Spring-8 BL01B1. We obtained atomic scattering factors f1 and f2 by the curve fitting to the reflectivities of our witness sample. The edges associated with the L-I, II, and III transitions are identified, of which the depths are found to be roughly 60% shallower than those expected from the Henke's atomic scattering factor.

Hofmeister Anion Effects on Protein Adsorption at an Air-Water Interface.

Hofmeister anion effects on adsorption kinetics of the positively charged lysozyme (pH < pI) at an air-water interface were studied by surface tension measurements and time-resolved X-ray reflectometry. In the salt-free solution, the protein adsorption rate increases with decreasing the net positive charge of lysozyme. When salt ions are dissolved in water, the protein adsorption rate drastically increases, and the rate is following an inverse Hoffmeister series (Br(-) > Cl(-) > F(-)). This is the result of the strongly polarized halide anion Br(-) being attracted to the adsorbed protein layer due to strong interaction with local electric field, while weakly polarized anion F(-) having no ability to penetrate the protein layer. In X-ray reflection studies, we observed that the lysozyme molecules initially adsorbed on the air-water interface have a flat unfolded structure as previously reported in the salt-free solution. In contrast, in the concentrated salt solutions, the lysozyme molecules begin to refold during adsorption. This protein refolding as a result of protein-protein rearrangements may be a precursor phenomenon of crystallization. The refolding is most significant for Cl(-), which is a good crystallization agent, whereas it is less observed for the strongly hydrated F(-). It is widely known in the bulk state that kosmotropic anions tend to precipitate proteins but at the same time stabilize proteins against denaturing. On the other hand, at the air-water interface where adsorbed proteins usually unfold, we observed chaotropic anions strongly bound to proteins that reduce electrostatic repulsion between protein molecules, and subsequently they induce protein refolding whereas the kosmotropic anions do not.

Network topology for the formation of solvated electrons in binary CaO-Al2O3 composition glasses.

Glass formation in the CaO-Al2O3 system represents an important phenomenon because it does not contain typical network-forming cations. We have produced structural models of CaO-Al2O3 glasses using combined density functional theory-reverse Monte Carlo simulations and obtained structures that reproduce experiments (X-ray and neutron diffraction, extended X-ray absorption fine structure) and result in cohesive energies close to the crystalline ground states. The O-Ca and O-Al coordination numbers are similar in the eutectic 64 mol % CaO (64CaO) glass [comparable to 12CaO·7Al2O3 (C12A7)], and the glass structure comprises a topologically disordered cage network with large-sized rings. This topologically disordered network is the signature of the high glass-forming ability of 64CaO glass and high viscosity in the melt. Analysis of the electronic structure reveals that the atomic charges for Al are comparable to those for Ca, and the bond strength of Al-O is stronger than that of Ca-O, indicating that oxygen is more weakly bound by cations in CaO-rich glass. The analysis shows that the lowest unoccupied molecular orbitals occurs in cavity sites, suggesting that the C12A7 electride glass [Kim SW, Shimoyama T, Hosono H (2011) Science 333(6038):71-74] synthesized from a strongly reduced high-temperature melt can host solvated electrons and bipolarons. Calculations of 64CaO glass structures with few subtracted oxygen atoms (additional electrons) confirm this observation. The comparable atomic charges and coordination of the cations promote more efficient elemental mixing, and this is the origin of the extended cage structure and hosted solvated (trapped) electrons in the C12A7 glass.

Visualization of the heterogeneity of cerium oxidation states in single Pt/Ce2Zr2O(x) catalyst particles by nano-XAFS.

The cerium oxidation states in single catalyst particles of Pt/Ce2Zr2O(x) (x=7 to 8) were investigated by spatially resolved nano X-ray absorption fine structure (nano-XAFS) using an X-ray nanobeam. Differences in the distribution of the Ce oxidation states between Pt/Ce2Zr2O(x) single particles of different oxygen compositions x were visualized in the obtained two-dimensional X-ray fluorescent (XRF) mapping images and the Ce L(III)-edge nano X-ray absorption near-edge structure (nano-XANES) spectra.

Enhancement of mineral density and mechanical properties in root caries treated with silver diammine fluoride and glass ionomer cement, with emphasis on silver ion distribution.

OBJECTIVES: This study aimed to measure the distribution of silver ion (Ag+), mineral recovery, and nanohardness in carious lesions and comprehensively evaluate the degree of dentin restoration. METHODS: Sixty human teeth with root caries were randomly assigned to the control, silver diammine fluoride (SDF) [Safo], and SDF+Glass ionomer cement (GIC) treatment [Safo+Fuji] groups. Micro-computed tomography (micro-CT) was performed at five time points for each sample before/after treatment to evaluate mineral density within and around carious lesions. Three months following treatment, 12 samples were selected for synchrotron radiation X-ray fluorescence analysis to evaluate Ag+ distribution, while 15 samples were selected for nanoindentation. Data were analyzed using Dunnett's T3 test for micro-CT and Wilcoxon rank sum test with Bonferroni correction (p = 0.017) for nanoindentation. The correlation between hardness and mineral change was analyzed using the Spearman rank correlation coefficient. RESULTS: The Safo and Safo+Fuji groups showed significantly higher mineral recovery rates than did the control group (p < 0.001). In the Safo group, Ag+ accumulated in the deeper layers rather than the superficial layer of caries. In the Safo+Fuji group, Ag+ was found evenly distributed throughout caries, with only a few Ag+ detected in the GIC layer. Hardness in the Safo+Fuji group was significantly higher compared with the Safo group at depths in the range of 10-50 µm. CONCLUSION: In the presence of GICs, SDF exhibited high remineralization capacity when diffusing throughout carious lesions over time. Combined treatment with SDF and GIC could strengthen root dentin even in the presence of caries. CLINICAL SIGNIFICANCE: We found that combination treatment with SDF and GIC could increase mineral density in caries and improve the hardness of the tooth structure compared with fluoride-based agents alone. These findings might pave the way for future clinical trials to determine the therapeutic potential of nanotechnology-based restorative materials.

Structural kinetics of a Pt/C cathode catalyst with practical catalyst loading in an MEA for PEFC operating conditions studied by in situ time-resolved XAFS.

The structural kinetics of surface events on a Pt/C cathode catalyst in a membrane electrode assembly (MEA) with a practical catalyst loading (0.5 mgPt cm(-2)) for a polymer electrolyte fuel cell were investigated by in situ time-resolved X-ray absorption fine structure analysis (XAFS; time resolution: 100 ms) for the first time. The rate constants of structural changes in the Pt/C cathode catalyst in the MEA during voltage cycling were successfully estimated. For voltage-cycling processes, all reactions (electrochemical reactions and structural changes in the Pt catalyst) in the MEA were found to be much faster than those in an MEA with a thick cathode catalyst layer, but the in situ time-resolved XAFS analysis revealed that significant time lags similarly existed between the electrochemical reactions and the structural changes in the Pt cathode catalyst. The time-resolved XAFS also revealed differences in the structural kinetics of the Pt/C cathode catalyst for the voltage-cycling processes under N2 and air flows at the cathode.

Counteranion-induced structural isomerization of phosphine-protected PdAu8 and PtAu8 clusters.

Controlling the geometric structures of metal clusters through structural isomerization allows for tuning of their electronic state. In this study, we successfully synthesized butterfly-motif [PdAu8(PPh3)8]2+ (PdAu8-B, B means butterfly-motif) and [PtAu8(PPh3)8]2+ (PtAu8-B) by the structural isomerization from crown-motif [PdAu8(PPh3)8]2+ (PdAu8-C, C means crown-motif) and [PtAu8(PPh3)8]2+ (PtAu8-C), induced by association with anionic polyoxometalate, [Mo6O19]2- (Mo6) respectively, whereas their structural isomerization was suppressed by the use of [NO3]- and [PMo12O40]3- as counter anions. DR-UV-vis-NIR and XAFS analyses and density functional theory calculations revealed that the synthesized [PdAu8(PPh3)8][Mo6O19] (PdAu8-Mo6) and [PtAu8(PPh3)8][Mo6O19] (PtAu8-Mo6) had PdAu8-B and PtAu8-B respectively because PdAu8-Mo6 and PtAu8-Mo6 had bands in optical absorption at the longer wavelength region and different structural parameters characteristic of the butterfly-motif structure obtained by XAFS analysis. Single-crystal and powder X-ray diffraction analyses revealed that PdAu8-B and PtAu8-B were surrounded by six Mo6 with rock salt-type packing, which stabilizes the semi-stable butterfly-motif structure to overcome high activation energy for structural isomerization.

5D Analysis of Capacity Degradation in Battery Electrodes Enabled by Operando CT-XANES.

For devices encountering long-term stability challenges, a precise evaluation of degradation is of paramount importance. However, methods for comprehensively elucidating the degradation mechanisms in devices, particularly those undergoing dynamic chemical and mechanical changes during operation, such as batteries, are limited. Here, a method is presented using operando computed tomography combined with X-ray absorption near-edge structure spectroscopy (CT-XANES) that can directly track the evolution of the 3D distribution of the local capacity loss in battery electrodes during (dis)charge cycles, thereby enabling a five-dimensional (the 3D spatial coordinates, time, and chemical state) analysis of the degradation. This paper demonstrates that the method can quantify the spatiotemporal dynamics of the local capacity degradation within an electrode during cycling, which has been truncated by existing bulk techniques, and correlate it with the overall electrode performance degradation. Furthermore, the method demonstrates its capability to uncover the correlation among observed local capacity degradation within electrodes, reaction history during past (dis)charge cycles, and electrode microstructure. The method thus provides critical insights into the identification of degradation factors that are not available through existing methods, and therefore, will contribute to the development of batteries with long-term stability.

Emergence of Dynamically-Disordered Phases During Fast Oxygen Deintercalation Reaction of Layered Perovskite.

Determination of a reaction pathway is an important issue for the optimization of reactions. However, reactions in solid-state compounds have remained poorly understood because of their complexity and technical limitations. Here, using state-of-the-art high-speed time-resolved synchrotron X-ray techniques, the topochemical solid-gas reduction mechanisms in layered perovskite Sr3 Fe2 O7- δ (from δ ∼ 0.4 to δ = 1.0), which is promising for an environmental catalyst material is revealed. Pristine Sr3 Fe2 O7- δ shows a gradual single-phase structural evolution during reduction, indicating that the reaction continuously proceeds through thermodynamically stable phases. In contrast, a nonequilibrium dynamically-disordered phase emerges a few seconds before a first-order transition during the reduction of a Pd-loaded sample. This drastic change in the reaction pathway can be explained by a change in the rate-determining step. The synchrotron X-ray technique can be applied to various solid-gas reactions and provides an opportunity for gaining a better understanding and optimizing reactions in solid-state compounds.