RESUMEN
BACKGROUND: Although various surgical methods are used to treat lumbosacral tuberculosis, no unified surgical approach exists. Thus, exploring an optimal operation method has substantial clinical importance. Evaluate the initial stability of a new surgical method, a one-stage anterior debridement and cage implantation combined with anterior-lateral fixation by a dual screw-rod construct, in the treatment of lumbosacral tuberculosis and provide biomechanical support for its further promotion in clinical applications. METHODS: Fifteen fresh human lumbosacral spine specimens without fractures, deformities or osteoporosis were randomly divided into intact (I), anterior fixation (AF) and posterior fixation (PF) groups. All AF and PF group specimens had subtotal resections of the L5 vertebra and adjacent discs, while the I group specimens were kept intact. Then, titanium cages were implanted in the surgical site and a dual screw-rod construct was fixed anterior-laterally in the AF group, while the PF group specimens were fixed posteriorly with only the dual screw-rod construct. Mechanical tests were conducted for initial stability evaluations. RESULTS: The load at the maximum displacement (5 mm) or rotation angle (5 °) was less for the I group specimens than for the AF and PF group specimens in all directions (P < 0.05). The load at the maximum displacement (5 mm) was greater for the AF group specimens than for the PF group specimens in flexion, lateral bending and axial compression (P < 0.05) and lower than in the PF group specimens in extension (P < 0.05). In torsion, there was no difference between the loads in the AF and PF groups at the maximum rotation angle (5 °) (P > 0.05). CONCLUSIONS: The proposed surgical approach can provide better immediate stability than anterior debridement with posterior dual screw-rod fixation in the treatment of lumbosacral tuberculosis in flexion, lateral bending and axial compression.
Asunto(s)
Desbridamiento/métodos , Vértebras Lumbares/cirugía , Sacro/cirugía , Fusión Vertebral/métodos , Tuberculosis de la Columna Vertebral/cirugía , Fenómenos Biomecánicos , Clavos Ortopédicos , Tornillos Óseos , Cadáver , Desbridamiento/instrumentación , Estudios de Factibilidad , Femenino , Humanos , Masculino , Persona de Mediana Edad , Fusión Vertebral/instrumentaciónRESUMEN
OBJECTIVE: To design a novel prosthesis, a movable artificial lumbar complex (MALC), for non-fusion reconstruction after lumbar subtotal corpectomy and to evaluate the stability, range of motion and load-bearing strength in the human cadaveric lumbar spine. METHODS: Biomechanical tests were performed on lumbar spine specimens from 15 healthy cadavers which were divided in three groups: non-fusion, fusion and intact group. The range of motion (ROM), stability and load-bearing strength were measured. RESULTS: The prosthesis was composed of three parts: the upper and lower artificial lumbar discs and the middle artificial vertebra. Both the MALC and titanium mesh cage re-established vertebral height, and no spinal cord compression or prosthesis dislocation was observed at the operative level. Regarding stability, there was no significant difference in all directions between the intact group and non-fusion group (P > 0.05). Segment movements of the specimens in the non-fusion group revealed significantly decreased T12-L1 ROM and significantly increased L1-2 and L2-3 ROM in flexion/extension and lateral bending compared with those in the fusion group (P < 0.05). Regarding load-bearing strength, when the lumbar vertebra was ruptured, there was no damage to the MALC and titanium mesh cage, but the maximum load in the non-fusion group was larger (P > 0.05). CONCLUSIONS: Compared with titanium cages, the MALC prosthesis not only restored the vertebral height and effectively preserved segment movements without any abnormal gain of mobility in adjacent inter-vertebral spaces but also bore the lumbar load and reduced the local stress load of adjacent vertebral endplates.
Asunto(s)
Vértebras Lumbares , Procedimientos Ortopédicos , Enfermedades de la Columna Vertebral/cirugía , Fenómenos Biomecánicos , Humanos , Prótesis Articulares , Vértebras Lumbares/fisiología , Vértebras Lumbares/cirugía , Procedimientos Ortopédicos/instrumentación , Procedimientos Ortopédicos/métodos , Diseño de Prótesis , Rango del Movimiento ArticularRESUMEN
BACKGROUND The aim of this study was to compare renal function in children with congenital scoliosis and congenital anomalies of the kidney and urinary tract, with healthy children. MATERIAL AND METHODS Biochemical tests were performed before surgery (pre-therapy) and after surgery (post-therapy) in 16 children with congenital scoliosis and congenital anomalies of the kidney and urinary tract. Thirty-two healthy children were matched for age, sex, and weight (healthy controls). General renal function tests included serum electrolytes, creatinine, urea, cystatin C, and estimated glomerular filtration rate (eGFR). Tests for early renal changes included N-acetyl-beta-D-glucosaminidase (NAG), urine microalbumin, serum transferrin, immunoglobulin G (IgG), urinary alpha-1-microglobulin (A1M), and beta-2-microglobulin (B2M). RESULTS Sixteen patients with congenital anomalies of the kidney and urinary tract included eight boys (mean age, 11.38±2.00 years) and eight girls (mean age, 11.00±2.78 years). There were no significant differences in renal function between the pre-therapy and post-therapy groups (P>0.05), or between the three groups (pre-therapy, post-therapy, and healthy controls). In the pre-therapy group, there were significant differences in IgG, A1M, NAG, and serum phosphate levels between boys and girls, urine microalbumin was significantly increased in girls, but not boys (P<0.05). There were no significant differences between the pre-therapy group and post-therapy group (P>0.05). CONCLUSIONS Routine tests of renal function were normal in children with congenital scoliosis and congenital anomalies of the kidney and urinary tract, but early changes in renal function occurred before surgical treatment, indicating long-term follow-up of renal function is recommended.
Asunto(s)
Riñón/fisiopatología , Escoliosis/fisiopatología , Sistema Urinario/fisiopatología , Acetilglucosaminidasa/orina , Adolescente , Niño , China , Anomalías Congénitas/fisiopatología , Creatinina/sangre , Cistatina C/sangre , Femenino , Tasa de Filtración Glomerular , Humanos , Pruebas de Función Renal/métodos , Masculino , Escoliosis/complicaciones , Urea/sangreRESUMEN
Previous studies have indicated that the cognitive impairment or deficit is associated with GABAergic signaling in central nervous system. Inspired by the finding that receptor GABRR2 modulates concentration of GABA and phasic inhibitory GABAergic transmission in brain. This study investigated to what extent a genetic variant (c.1423C>T, rs282129) of GABRR2 gene modulates individuals' general cognitive ability in 987 Chinese Han people. Results showed a significant influence of GABRR2 gene polymorphism on individuals' Raven's Standard Progressive Matrices (RSPM) performance (F = 3.58, P = .028 by ANOVA and χ 2 = 9.35, P = .009 by K-W test, respectively), even if non-genetic factors were partialed out (gender, major, types of birthplace, and socioeconomic index) (B = -.67, SE = .26, t = 2.63, P = .009). The finding provided a strong evidence, to our knowledge, for the view that genetic variant of GABRR2 gene may contribute to the difference of individuals' general cognitive ability, independently.
Asunto(s)
Pueblo Asiatico/genética , Trastornos del Conocimiento/genética , Cognición/fisiología , Polimorfismo Genético/genética , Receptores de GABA-A/genética , Adolescente , Trastornos del Conocimiento/epidemiología , Femenino , Predisposición Genética a la Enfermedad/epidemiología , Predisposición Genética a la Enfermedad/genética , Variación Genética/genética , Humanos , Masculino , Adulto JovenRESUMEN
OBJECTIVE: In this study, we aimed to design a movable artificial lumbar complex (MALC) prosthesis for non-fusion reconstruction after lumbar subtotal corpectomy and to establish an in vitro anterolateral lumbar corpectomy non-fusion model for evaluating the biomechanical stability, preservation of segment movements and influence on adjacent inter-vertebral movements of this prosthesis. METHODS: Imaging was performed on a total of 26 fresh goat lumbar spine specimens to determine which of the specimens did not meet the requirements (free of deformity and fractures); the residual specimens were randomly divided into an intact group, a fusion group and a non-fusion group. Bone mineral density (BMD) was tested and compared among the three groups. Biomechanical testing was conducted to obtain the range of motion (ROM) in flexion-extension, lateral bending at L2-3, L3-4 and L4-5 and axial rotation at L2-5 in the three groups. RESULTS: Two specimens were excluded due to vertebral fractures. BMD showed no statistical significance among three groups (P > 0.05). The stability of the prosthesis did not differ significantly during flexion, extension, and lateral bending at L2-3, L3-4, and L4-5 and axial torsion at L2-5 between the intact group and the non-fusion group (P > 0.05). Segment movements of the specimens in the non-fusion group revealed significantly decreased L2-3 ROM and significantly increased L3-4 and L4-5 ROM in flexion and lateral bending compared with the fusion group (P < 0.05). CONCLUSIONS: Reconstruction with a MALC prosthesis after lumbar subtotal corpectomy not only produced instant stability but also effectively preserved segment movements, without any abnormal gain of mobility in adjacent inter-vertebral spaces. However, additional studies, including in vivo animal experiments as well as biocompatibility and biomechanical tests of human body specimens are needed.
Asunto(s)
Vértebras Lumbares , Modelos Biológicos , Procedimientos Ortopédicos/métodos , Prótesis e Implantes , Animales , Fenómenos Biomecánicos , Cabras , Vértebras Lumbares/diagnóstico por imagen , Vértebras Lumbares/cirugía , Movimiento , Diseño de Prótesis , Distribución Aleatoria , Rango del Movimiento ArticularRESUMEN
BACKGROUND: Clavicular hook plates are frequently used in clinical orthopedics to treat acromioclavicular joint dislocation. However, patients often exhibit acromial osteolysis and peri-implant fracture after hook plate fixation. To solve the above problems, we developed a novel double-hook clavicular plate and used finite element analysis (FEA) to investigate its biomechanical properties. METHODS: A finite element (FE) model was constructed and validated. Then, a double-hook clavicular plate, a single-hook clavicular plate, and an anatomical double-hook clavicular plate was implanted into the acromioclavicular joint and fixed with screws in groups 1, 2 and 3, respectively. Finally, a load was applied, and some indicators were recorded and analyzed. RESULTS: For both the proximal clavicular rotation angle and the distal clavicular displacement, the range of motion in groups 1 and 3 was more than 90% lower than that in group 2. The maximum von Mises stress of the clavicle in groups 1 and 3 was more than 45% lower than that in group 2. The maximum stress of the acromion in group 2 was significantly higher than that in groups 1 and 3, and that in group 3 was less than that in group 1, for both cortical and cancellous bone. CONCLUSIONS: The double-hook clavicular plate could immediately reconstruct the stability of the acromioclavicular joint, effectively reducing the stress of the bone around the clavicle and screws. Additionally, the double-hook clavicular plate could reduce the peak stress of the acromion and produce a more uniform stress distribution.
Asunto(s)
Articulación Acromioclavicular , Luxaciones Articulares , Articulación Acromioclavicular/diagnóstico por imagen , Articulación Acromioclavicular/cirugía , Placas Óseas , Análisis de Elementos Finitos , Fijación Interna de Fracturas , Humanos , Resultado del TratamientoRESUMEN
The aim of the study was to evaluate the biomechanical properties of a novel nonfused artificial vertebral body in treating lumbar diseases and to compare with those of the fusion artificial vertebral body. An intact finite element model of the L1-L5 lumbar spine was constructed and validated. Then, the finite element models of the fusion group and nonfusion group were constructed by replacing the L3 vertebral body and adjacent intervertebral discs with prostheses. For all finite element models, an axial preload of 500 N and another 10 N m imposed on the superior surface of L1. The range of motion and stress peaks in the adjacent discs, endplates, and facet joints were compared among the three groups. The ranges of motion of the L1-2 and L4-5 discs in flexion, extension, left lateral bending, right lateral bending, left rotation and right rotation were greater in the fusion group than those in the intact group and nonfusion group. The fusion group induced the greatest stress peaks in the adjacent discs and adjacent facet joints compared to the intact group and nonfusion group. The nonfused artificial vertebral body could better retain mobility of the surgical site after implantation (3.6°-8.7°), avoid increased mobility and stress of the adjacent discs and facet joints.
Asunto(s)
Fijación Interna de Fracturas , Disco Intervertebral , Vértebras Lumbares/fisiopatología , Rango del Movimiento Articular/fisiología , Fenómenos Biomecánicos/fisiología , Análisis de Elementos Finitos , Humanos , Modelos Teóricos , Prótesis e Implantes , Rotación , Fusión Vertebral/rehabilitación , Cuerpo Vertebral/fisiopatología , Articulación Cigapofisaria/fisiopatologíaRESUMEN
MicroRNAs (miRNAs) function as gene expression switches, and participate in diverse pathophysiological processes of spinal cord injury (SCI). Olfactory ensheathing cells (OECs) can alleviate pathological injury and facilitate functional recovery after SCI. However, the mechanisms by which OECs restore function are not well understood. This study aims to determine whether silencing miR-199a-5p would enhance the beneficial effects of the OECs. In this study, we measured miR-199a-5p levels in rat spinal cords with and without injury, with and without OEC transplants. Then, we transfected OECs with the sh-miR-199a-5p lentiviral vector to reduce miR-199a-5p expression and determined the effects of these OECs in SCI rats by Basso-Beattie-Bresnahan (BBB) locomotor scores, diffusion tensor imaging (DTI), and histological methods. We used western blotting to measure protein levels of Slit1, Robo2, and srGAP2. Finally, we used the dual-luciferase reporter assay to assess the relationship between miR-199-5p and Slit1, Robo2, and srGAP2 expression. We found that SCI significantly increased miR-199a-5p levels (P < 0.05), and OEC transplants significantly reduced miR-199a-5p expression (P < 0.05). Knockdown of miR-199a-5p in OECs had a better therapeutic effect on SCI rats, indicated by higher BBB scores and fractional anisotropy values on DTI, as well as histological findings. Reducing miR-199a-5p levels in transplanted OECs markedly increased spinal cord protein levels of Slit1, Robo2, and srGAP2. Our results demonstrated that transplantation of sh-miR-199a-5p-modified OECs promoted functional recovery in SCI rats, suggesting that miR-199a-5p knockdown was more beneficial to the therapeutic effects of OEC transplants. These findings provided new insights into miRNAs-mediated therapeutic mechanisms of OECs, which helps us to develop therapeutic strategies based on miRNAs and optimize cell therapy for SCI.
Asunto(s)
MicroARNs/farmacología , Bulbo Olfatorio/trasplante , Recuperación de la Función/efectos de los fármacos , Traumatismos de la Médula Espinal/terapia , Médula Espinal/cirugía , Animales , Trasplante de Células/métodos , Tratamiento Basado en Trasplante de Células y Tejidos/métodos , Células Cultivadas , Modelos Animales de Enfermedad , Masculino , MicroARNs/genética , Bulbo Olfatorio/efectos de los fármacos , Ratas Sprague-Dawley , Receptores Inmunológicos/metabolismo , Recuperación de la Función/fisiología , Médula Espinal/patologíaRESUMEN
OBJECTIVE: To explore the feasibility and the attention of perioperative management of goat lumbar fusion model for individualized 3D printing technology. METHODS: According to preoperative X-ray and CT three dimensional reconstruction data of 10 males Boer goat's lumbar(1-2 years old, weight 35-45 kg), the preoperative open height were determined, meanwhile, according to the theoretical entry point of nails, the length of steel plate, arc, and setting position, screw length for reference were determined, the lumbar lateral anterior plate was designed and 3D-printed. Goats lied on the right side, under the general anesthesia, the lumbar vertebrae of the goats and the adjacent intervertebral disc were resected, and the titanium cage after the bone graft was implanted into the goat, the 3D-print lateral bone plate was fixed. After operation, feeding, fluid infusion, anti infection, postoperative complications management, respiratory digestion perioperative management were performed. RESULTS: The 10 models for goats were successful in results. Postoperative X-ray film and three-dimensional reconstruction of CT showed that titanium cage and bone plate were in good position and reliable. Three months after the operation, CT 3D reconstruction and micro-CT of the goat were observed, and the fusion of the spine was observed. Imaging studies showed that the fusion of the lateral bone plate fixation titanium cage was both at the end of the titanium cage and the dense bone trabecular formation between the vertebral bodies. CONCLUSIONS: The 3D printing technology sets up the goat lumbar spinal fusion model successfully, which is a kind of effective, more successful, reliable and stable method, perioperative management. The method is scientific, practical, and more humanized, to ensure that lumbar lateral successfully implanted the nail plate of lateralanterior internal fixation system, with reduction of occurrence of surgical complications.
Asunto(s)
Fusión Vertebral , Animales , Placas Óseas , Cabras , Vértebras Lumbares , Masculino , Impresión TridimensionalRESUMEN
OBJECTIVE: To study and measure the anatomic structure of lumbar vertebral endplate structure in healthy adults by computed tomography(CT) technique in order to provide a useful guidance for the optimal design and clinical application of lumbar prostheses. METHODS: Sixty healthy adults (male and female equals) were recruited for full-waist CT scan after signing the informed consent form in the imaging department of the Second Affiliated Hospital of Xi'an Jiaotong University. The scanning data was imported into the computer aided software Mimics 16.0 for 3D reconstruction and measurement. The acquisition indexes included median sagittal diameter, maximum coronal diameter, concavity depth, median sagittal depression angle, coronal depression angle and so on. Finally, the collected data were statistically analyzed by the statistical software. RESULTS: The median sagittal diameter and the maximum coronal diameter of the upper and lower endplates were not only different between the different sexes(P<0.05), but also were increased with the increase of the lumbar spine sequence. The concavity depth of upper and lower endplates had no gender differences(P>0.05), but had a little change from L1 to L5, fluctuating from 1.5 to 2.0 mm and from 2.2 to 3.9 mm, respectively. In the same sequence, the concavity depth of lower endplate in males was greater than that of upper endplate, and the difference was statistically significant(P<0.05), but there was no significant difference in the concavity depth of upper and lower endplate in females(P>0.05). Sagittal concavity angle and coronal concavity angle of upper and lower endplates changed slightly with the increase of vertebral order, and there was no gender difference in sagittal and coronal concavity angle of most vertebral sequences (P>0.05). Statistics showed that the largest concavity near the caudal lumbar endplate was located on the dorsal side of the endplate plane. CONCLUSIONS: The anatomical structure of the lumbar endplate is very complicated. It is important to master the anatomical parameters of the endplate and make full use of CT before operation for the development and clinical application of the lumbar prosthesis.
Asunto(s)
Vértebras Lumbares , Región Lumbosacra , Femenino , Humanos , Masculino , Prótesis e Implantes , Tomografía Computarizada por Rayos XRESUMEN
OBJECTIVE: To systematically evaluate the clinical effect of high frequency repeated transcranial magnetic stimulation(HF rTMS)therapy on dyskinesia in patients with incomplete spinal cord injury. METHODS: Randomized controlled trials(RCTs) about HF rTMS therapy on patients with motor incomplete spinal cord injury were searched electronically in PubMed, Google scholar, Cochrane library, Clinical trial, Medline, Web of science, CNKI, VIP, and Wanfang database before October 2016. Two reviewers independently screened the literatures according to the inclusion and exclusion criteria, as well as extracted the data and assessed the methodological quality. The observed outcomes included ASIA motor score, ASIA lower extremities motor score(LEMS), Modified Ashworth score (MAS), Ten-meter walking test (10MWT) and Walking index for SCI II(WISCI II), and the outcomes were analyzed using RevMan5.2 software provided by the Cochrane information management system. RESULTS: Five RCTs involved 103 patients were included, and 61 patients(experimental group) accepted real rTMS and physical rehabilitation care for SCI, 51 patients(control group) accepted only physical rehabilitation care. There were significant differences in ASIA motor score, LEMS and 10MWT between two groups after HF rTMS therapy (statistics were Z=2.96, P=0.003; Z=3.04, P=0.002; Z=2.16, P=0.03; respectively). When stimulating the leg motor cortex, there was significant difference in MAS between two groups(Z=2.79, P=0.005), and when stimulating the vertex, there was no significant difference(Z=0.09, P=0.93). There was no significant difference in WISCI IIscore after HF rTMS therapy between two groups(Z=0.90, P=0.37). CONCLUSIONS: HF rTMS can raise motor score in patients with incomplete spinal cord injury, improve the spasticity of the lower extremities, and increase the motor ability.
Asunto(s)
Discinesias/rehabilitación , Traumatismos de la Médula Espinal/rehabilitación , Estimulación Magnética Transcraneal , Humanos , Ensayos Clínicos Controlados Aleatorios como AsuntoRESUMEN
OBJECTIVE: To study the anatomical measurement of goat lumbar vertebrae and to compare with human lumbar vertebrae, so as to build the foundation for establishing animal models of lumbar prosthesis. METHODS: The anatomical parameters of the vertebral body, pedicle and intervertebral disc in the fresh lumbar vertebrae of Boer goat and the lumbar vertebrae of healthy adults were collected by computer aided software Mimics16.0, and the anatomical characteristics of the two lumbar vertebrae were compared with the statistical software. RESULTS: The anterior vertebral body height(VBHa) of goat lumbar was less than the middle vertebral body height(VBHm), which was less than the posterior vertebral body height(VBHp), and the maximum values were (38.7±2.9), (40.1±2.6) and (40.7±2.7) mm respectively. Its endplate width was greater than its depth, with the whole shaped like a heart or a kidney. The cranial endplate of goats was convex while the caudal endplate was depressed and the depression was small, with a maximum value of (1.6±0.6) mm. The pedicle height of goats increased from L11 to LÌ with the maximum of (30.5±1.9) mm; its pedicle width and angle increased firstly and then decreased with the increase of vertebra level and the minimum values were (6.7±0.4) mm and(45.9±2.6)° respectively. The anterior intervertebral disc height was larger than the middle which was larger than the posterior and all varied slightly with the changes of intervertebral spaces; the height and width of intervertebral foramen separately waved at (12.9±0.3) to (14.3±1.0) mm and (5.7±1.0) to (6.7±0.9) mm. The comparative results showed that the vertebral body height, pedicle height and angle of goats were greater than those of humans (P<0.05) while the width and depth of the endplate, the intervertebral disc height, and etc. were significantly smaller than those of humans (P<0.05). In addition, some structures, such as the height of pedicle and intervertebral disc, also showed different changing laws with the increase of vertebra level. CONCLUSIONS: Although there are similarities in goat lumbar spine in some aspects, such as endplate and foramen foramen, there are still many differences in many aspects. Understanding the anatomical characteristics of goat lumbar vertebrae and the difference between goat and human is of great guiding significance for the research of goat prosthesis and related technology.
Asunto(s)
Disco Intervertebral , Vértebras Lumbares , Animales , Cabras , Cráneo , Tomografía Computarizada por Rayos XRESUMEN
Artificial vertebral body has achieved good results in treating spinal tumors, tuberculosis, fracture and other diseases. Currently, artificial vertebral body with variety of kinds and pros and cons, is generally divided into two types: fusion type and movable type. The former according to whether the height could be adjusted and strength of self-stability is divided into three types: support-fixed type, adjust-fixed type and self-fixed type. Whether the height of self-fixed type could be adjusted is dependent on structure of collar thread rotation. The latter is due to mobile device of ball-and-socket joints or hollow structures instead of the disc which retains the activity of the spine to some extent. Materials of artificial vertebral body include metals, ceramics, biomaterials, polymer composites and other materials. Titanium with a dominant role in the metal has developed to the third generation, but there are still defects such as poor surface bioactivity; ceramics with the representative of hydroxyapatite composite, magnetic bioceramics, polycrystalline alumina ceramics and so on, which have the defects of processing complex and uneven mechanical properties; biological material is mainly dominated by xenogeneic bone, which is closest to human bone in structure and properties, but has defects of low toughness and complex production; polymer composites according to biological characteristics in general consists of biodegradable type and non-biodegradable type which are respectively represented by poly-lactide and polyethylene, each with advantages and disadvantages. Although the design and materials of prosthesis have made great progress, it is difficult to fully meet requirements of spinal implants and they need be further optimized. 3D printing technology makes process of the complex structure of prosthesis and individual customization possible and has broad development prospects. However, long production cycles and high cost of defect should be overcome. Although artificial vertebral body has achieved curative effect in treating spinal disease, there were reports of implant loosening or displacement. Combining with evaluation standards not unified, short follow-up time, its exact effect needs further observation.
Asunto(s)
Órganos Artificiales , Prótesis e Implantes , Columna Vertebral , Materiales Biocompatibles , Durapatita , Humanos , TitanioRESUMEN
OBJECTIVE: To evaluate curative effects of intramedullary nail and volar plate internal fixation for distal radius fractures. METHODS: The studies concerning about randomized controlled trial of intramedullary nail and volar plate internal fixation for distal radius fractures from create database to May, 2016 were searched from PubMed, Cochrane Library, Web of Science, CNKI, Wan Fang data and VIP. Information was screen and taken out according to inclusion and exclusion criteria, quality of literature was evaluated according to Cochrane Handbook evaluating system. Meta analysis was performed by RevMan 5.2 software. Postoperative grip strength, clinical effects(results of flexion and extension, pronation, supination, deflection of ulnar and radialis) , imaging evaluation (ulnar variance, radial height, volar tilting angle and radial inclination) and the incidence of postoperative complications were analyzed. RESULTS: Totally 6 RCT including 370 patients were chosen. According to the Meta analysis, there were no statistical differences in extension[MD=5.63, 95%CI(-7.01, 18.27), P=0.38], flexion[MD=3.10, 95%CI(-0.67, 6.86), P=0.11], pronation[MD=2.58, 95%CI(-0.49, 5.65), P=0.10], supination[MD=0.82, 95%CI(-1.89, 3.54), P=0.55], radial deviation[MD=-5.16, 95%CI(-14.42, 4.11), P=0.28], ulnar deviation[MD=0.19, 95%CI(-2.39, 2.77), P=0.88], ulnar variance[MD=-0.01, 95%CI(-0.43, 0.42), P=0.97], ulnar inclination[MD=-0.31, 95%CI(-1.37, 0.73), P=0.56], radial height[MD=-0.27, 95%CI(-0.98, 0.44), P=0.45], radial inclination[MD=0.29, 95%CI(-0.41, 0.99), P=0.42] and the incidence of postoperative complications[RR=0.71, 95%CI(0.46, 1.09), P=0.12] between intramedullary nail and volar plate internal fixation. CONCLUSIONS: Compared with volar plate internal fixation, intramedullary nail has the same effect in grip strength, clinical effect, but could not reduce the occurrence of postoperative complications. However, a large number of prospective randomized controlled study should be carried out to prove clinical effect of intramedullary nail for distal radius fractures.
Asunto(s)
Fijación Interna de Fracturas/métodos , Fracturas del Radio/cirugía , Fuerza de la Mano , Humanos , Estudios Prospectivos , Ensayos Clínicos Controlados Aleatorios como Asunto , Rango del Movimiento Articular , Resultado del TratamientoRESUMEN
The choline O-acetyltransferase (CHAT) gene has been associated with various human disorders that involve cognitive impairment or deficiency. However, the influence of disease-associated variants of CHAT on normal individuals remains dubious. Here we demonstrated the impact of CHAT sequence variants (G-120A) on general human cognitive ability in a cohort of 750 Chinese undergraduate students. A multiple choice questionnaire was used to obtain basic demographic information, such as parents' occupations and education levels. We also administered and scored the Raven's Standard Progressive Matrices (RSPM). A one-way analysis of variance (ANOVA) and Kruskal-Wallis test (K-W) revealed a significant association between sequence polymorphisms of G-120A and individuals' Raven score (p=0.031 for ANOVA and p=0.026 for K-W tests). Moreover, further hierarchical analysis showed a similar trend in the association between G-120A variants and Raven scores only in the female subjects (p=0.008 for ANOVA and p=0.024 for K-W tests) but not in the male subjects. The results of a multiple linear regression confirmed that after we controlled gender, age, birthplace and other non-genetic factors, CHAT G-120A polymorphisms still significantly influenced individual Raven scores (B=-0.70, SE=0.28, t=-2.50, p=0.013). Our results demonstrated that sequence variants of CHAT were associated with human cognitive ability in not only patients with psychiatric disorders but also normal healthy individuals. However, some issues remained indeterminable, such as gender differences and the extent of the influence on individuals' general cognitive abilities; thus, the further research using an independent random sample was required.