Star-Like Glycosaminoglycans with Superior Bioactivity Assemble with Proteins into Microfibers.

Here it is shown that glycosaminoglycans (GAGs) with high molecular weight can be grafted via their reducing end on hyperbranched synthetic cores by oxime condensation without the need of any previous functionalisation of the polysaccharide. The versatility of this reaction is demonstrated by the use of hyaluronan, chondroitin sulfate and heparin with up to 60 sugar units. The isothermal calorimetry analysis demonstrated that the generated star-like glycopolymers have superior bioactivity. Moreover, when mixed with positively charged proteins (e.g., fibroblast growth factor-2, FGF-2) they form microfiber structures instead of the spherical nanocomplexes described for linear GAGs. The results suggest that the described star-like GAG are closer mimics of the proteoglycans at the structural and functional level and therefore have huge potential in the development of tissue engineering platforms and therapeutics by modulating the activity and presentation of various proteins such as growth factors.

Redox-Responsive Micellar Nanoparticles from Glycosaminoglycans for CD44 Targeted Drug Delivery.

Cancer progression is associated with overexpression of various receptors at the cell surface. Among these, CD44 is known to recognize and bind specifically hyaluronan (HA) and interact with less affinity to other glycosaminoglycans (GAGs), such as chondroitin sulfate (CS). In this study, we describe a simple method to obtain micellar nanoparticles with a GAG shell (HA or CS) as potential drug delivery systems that target cancer cells overexpressing CD44. Alkanethiol was conjugated at the reducing end of the respective GAG using highly efficient oxime chemistry. The alkane moiety confers amphiphilic behavior to the obtained conjugates and triggers their self-assembly into micellar nanoparticles, while the thiol group adds redox-responsiveness to the system. The properties of the particles depend on the used GAG: HA amphiphiles form more dense, smaller assemblies that are redox sensitive. Both systems allow encapsulation of either hydrophobic or hydrophilic cargos with high efficiency. We demonstrate that the GAGs exposed on the surface of the nanoparticles are with preserved bioactivity and recognized by the cellular receptors: the particles were internalized via CD44 dependent pathways.

Controlling cancer cell fate using localized biocatalytic self-assembly of an aromatic carbohydrate amphiphile.

We report on a simple carbohydrate amphiphile able to self-assemble into nanofibers upon enzymatic dephosphorylation. The self-assembly can be triggered by alkaline phosphatase (ALP) in solution or in situ by the ALP produced by osteosarcoma cell line, SaOs2. In the latter case, assembly and localized gelation occurs mainly on the cell surface. The gelation of the pericellular environment induces a reduction of the SaOs2 metabolic activity at an initial stage (≤7 h) that results in cell death at longer exposure periods (≥24 h). We show that this effect depends on the phosphatase concentration, and thus, it is cell-selective with prechondrocytes ATDC5 (that express ∼15-20 times lower ALP activity compared to SaOs2) not being affected at concentrations ≤1 mM. These results demonstrate that simple carbohydrate derivatives can be used in an antiosteosarcoma strategy with limited impact on the surrounding healthy cells/tissues.

Preparation, Properties, and Bioapplications of Block Copolymer Nanopatterns.

Block copolymer (BCP) self-assembly has emerged as a feasible method for large-scale fabrication with remarkable precision - features that are not common for most of the nanofabrication techniques. In this review, recent advancements in the molecular design of BCP along with state-of-the-art processing methodologies based on microphase separation alone or its combination with different lithography methods are presented. Furthermore, the bioapplications of the generated nanopatterns in the development of protein arrays, cell-selective surfaces, and antibacterial coatings are explored. Finally, the current challenges in the field are outlined and the potential breakthroughs that can be achieved by adopting BCP approaches already applied in the fabrication of electronic devices are discussed.

Hydrothermal extraction of ulvans from Ulva spp. in a biorefinery approach.

A simple cascade process based on the hydrothermal fractionation of Ulva spp. biomass was proposed. Considering the overall extraction yields (50 %), ulvan recovery (23 %), and ulvan composition, structural, mechanical and cytotoxic properties, the selected optimal final heating temperature was 160 °C. Ethanol precipitation provided the highest ulvan recovery yields but choline chloride precipitated ulvans showed stronger mechanical properties, G´ moduli 1.5·104 Pa and 3·104 Pa for ethanol and for choline chloride, respectively. Both products were safe on NCTC 929 mouse fibroblasts and after a cooling stage, formed films without requiring any additives. From the ulvan-free liquid fraction, one product with 43 % (wt, d.b.) phenolics and moderate antiradical properties and a byproduct containing nutrients and minerals were separated. The methane potential of the corresponding residual solids was influenced by the hydrothermal heating temperature and was doubled compared to than for the untreated seaweed biomass (60 mL/g VS). This scheme could be also applied to the wet algal biomass, in a chemical free alternative to provide ready to use ulvan biopolymers, bioactives, nutrients, salts and biogas, conforming a biorefinery approach.

Disclosing an NMR-invisible fraction in chitosan and PEGylated copolymers and its role on the determination of degrees of substitution.

An unexpected (1)H NMR invisible fraction (IF) for chitosan (CS) and CS-g-PEG is reported. The presence of this IF is remarkable considering that solution NMR is recognized as the method of choice for studying structural modifications in CS, including the degrees of acetylation (DA) and substitution (DS). In spite of IF figures as high as 50%, this IF does not interfere in the correct determination of the DA by (1)H NMR, pointing to a homogeneous distribution of acetyl groups along the visible and invisible fractions. Quite in contrast, the IF negatively biases the determination of the DS in CS-g-PEG, with relative errors as high as 150% in a broad range of temperatures, pH values, and concentrations. This fact raises concerns about the accuracy of previously reported DS data for CS-g-PEG and many other CS copolymers. Efficient user-friendly conditions have been developed for the correct determination of the DS of CS-g-PEG by depolymerization by nitrous acid.

End-on PEGylation of heparin: Effect on anticoagulant activity and complexation with protamine.

Heparin is the most common anticoagulant used in clinical practice but shows some downsides such as short half-life (for the high molecular weight heparin) and secondary effects. On the other hand, its low molecular weight analogue cannot be neutralized with protamine, and therefore cannot be used in some treatments. To address these issues, we conjugated polyethylene glycol (PEG) to heparin reducing end (end-on) via oxime ligation and studied the interactions of the conjugate (Hep-b-PEG) with antithrombin III (AT) and protamine. Isothermal titration calorimetry showed that Hep-b-PEG maintains the affinity to AT. Dynamic light scattering demonstrated that the Hep-b-PEG formed colloidal stable nanocomplexes with protamine instead of large multi-molecular aggregates, associated with heparin side effects. The in vitro (human plasma) and in vivo experiments (Sprague Dawley rats) evidenced an extended half-life and higher anticoagulant activity of the conjugate when compared to unmodified heparin.

Hyaluronan Brush-like Copolymers Promote CD44 Declustering in Breast Cancer Cells.

We report on the synthesis of hyaluronan (HA) brush-like copolymers and their application as antagonists of tumorigenic CD44-HA interactions. HA (4.8 kDa, ca. 24 saccharides) was grafted on 2-hydrohyethyl methacrylate (HEMA) by end-on oxime ligation. The obtained copolymers were compared with low and high molecular weight HA in terms of hydrolysis kinetics in the presence of hyaluronidase (isothermal titration calorimetry) and interactions with CD44 (surface plasmon resonance). The results evidenced that the high molecular weight HA and HA-g-HEMA have a much higher affinity to CD44 than low molecular weight HA. Additionally, slower enzymatic degradation was observed for the copolymer, making it an excellent candidate for active targeting of tumorigenic CD44-HA interactions. We, therefore, investigated the effect of the copolymer on cancer cell lines with different expression of CD44 and observed an efficient declustering of CD44 that is usually associated with reduction of metastasis and drug resistance.

Antibacterial nanopatterned coatings for dental implants.

Dental implants, usually made of titanium, are exposed to hostile oral microflora that facilitate bacterial infections and subsequent inflammation. To mitigate these processes, we coated titanium substrates with block copolymer nanopatterns and investigated the bactericidal effect of these coatings against Gram-positive and Gram-negative bacteria. We found that the bactericidal efficacy of the coatings depends on their morphology and surface chemistry as well as on the bacterial strain: an optimal combination can lead to significant bacterial death for a short time, i.e. 90% for 90 min. Human gingival fibroblasts in contact with the nanopatterned coatings showed similar cell attachment and morphology as on bare Ti. Immunostaining assays showed similar levels of CCR7 and CD206 in macrophages cultured over the nanopatterns and bare Ti, demonstrating adequate properties for tissue integration. The nanopatterns induced a small increase in macrophage aspect ratio, which might indicate early states of M2 polarization, given the absence of CD206.

NMR methods for unravelling the spectra of complex mixtures.

The main methods for the simplification of the NMR of complex mixtures by selective attenuation/suppression of the signals of certain components are presented. The application of relaxation, diffusion and PSR filters and other techniques to biological samples, pharmaceuticals, foods, living organisms and natural products are illustrated with examples.

Unveiling an NMR-Invisible Fraction of Polymers in Solution by Saturation Transfer Difference.

The observation of signals in solution NMR requires nuclei with sufficiently large transverse relaxation times (T2). Otherwise, broad signals embedded in the baseline afford an invisible fraction of nuclei (IF). Based on the STD (saturation transfer difference) sequence, IF-STD is presented as a quick tool to unveil IF in the 1H NMR spectra of polymers. The saturation of a polymer in a region of the NMR spectrum with IF (very short 1H T2) results in an efficient propagation of the magnetization by spin diffusion through the network of protons to a visible-invisible interphase with larger 1H T2 (STDon). Subtracting this spectrum from one recorded without saturation (STDoff) produces a difference spectrum (STDoff-on), with the nuclei at the visible-invisible interphase, that confirms the presence of an IF. Analysis of a wide collection of polymers by IF-STD reveals IF more common than previously thought, with relevant IF figures when STD > 0.4% at 750 MHz. A fundamental property of the IF-STD experiment is that the signal is generated within a single state comprising polymer domains with different dynamics, as opposed to several states in exchange with different degrees of aggregation. Contrary to a reductionist visible-invisible dichotomy, our results confirm a continuous distribution of nuclei with diverse dynamics. Since nuclei observed (edited) by IF-STD at the visible-invisible interphase are in close spatial proximity to the IF (tunable with the saturation time), they emerge as a privileged platform from which gaining an insight into the IF itself.

Isolation and Characterization of Polysaccharides from the Ascidian Styela clava.

Styela clava is an edible sea squirt farmed in Korea that has gradually invaded other seas, negatively impacting the ecology and economy of coastal areas. Extracts from S. clava have shown wide bioactivities, and ascidians have the unique capability among animals of biosynthesizing cellulose. Thus, S. clava is a relevant candidate for valorization. Herein, we aimed at surveying and characterizing polysaccharides in both tunic and flesh of this ascidian. To this end, we enzymatically hydrolyzed both tissues, recovering crystalline cellulose from the tunic with high aspect ratios, based on results from microscopy, X-ray diffraction, and infrared spectroscopy analyses. Alkaline hydroalcoholic precipitation was applied to isolate the polysaccharide fraction that was characterized by gel permeation chromatography (with light scattering detection) and NMR. These techniques allowed the identification of glycogen in the flesh with an estimated Mw of 7 MDa. Tunic polysaccharides consisted of two fractions of different Mw. Application of Diffusion-Ordered NMR allowed spectroscopically separating the low-molecular-weight fraction to analyze the major component of an estimated Mw of 40-66 kDa. We identified six different sugar residues, although its complexity prevented the determination of the complete structure and connectivities of the residues. The two more abundant residues were N-acetylated and possibly components of the glycosaminoglycan-like (GAG-like) family, showing the remaining similarities to sulfated galactans. Therefore, Styela clava appears as a source of nanocrystalline cellulose and GAG-like polysaccharides.

Hyaluronic Acid Oligomer Immobilization as an Angiogenic Trigger for the Neovascularization of TE Constructs.

Tissue engineered (TE) substitutes of clinically relevant sizes need an adequate vascular system to ensure function and proper tissue integration after implantation. However, the predictable vascularization of TE substitutes is yet to be achieved. Molecular weight variations in hyaluronic acid (HA) have been pointed to trigger angiogenesis. Thus, this study investigates HA oligomer immobilization as a promoter for TE construct vascularization. As a proof-of-concept, the surface of methacrylated gelatin (GelMA) hydrogels were functionalized with high molecular weight (HMW; 1.5 to 1.8 MDa) and low molecular weight (LMW; < 10 kDa) HA, previously modified with aldehyde groups to enable the immobilization through Schiff's base formation. The ability of A-HA to bind amine-presenting surfaces was confirmed by Surface Plasmon Resonance (SPR). Human Umbilical Vein Endothelial Cells (HUVECs) seeded over hydrogels functionalized with LMW HA showed higher proliferation and expression of angiogenic markers (KDR and CD31), than those grown in HMW HA conjugated- or plain surfaces, in line with the activation of HA ERK1/2 mediated downstream signaling. Moreover, when cocultured with human dental pulp cells (hDPCs) encapsulated into the GelMA, an increase in endothelial cell migration was observed for the LMW HA functionalized formulations. Overall LMW HA functionalization enhanced endothelial cell response showing potential as an angiogenesis inducer for TE applications.

A nanomedicine transports a peptide caspase-3 inhibitor across the blood-brain barrier and provides neuroprotection.

Caspases play an important role as mediators of cell death in acute and chronic neurological disorders. Although peptide inhibitors of caspases provide neuroprotection, they have to be administered intracerebroventricularly because they cannot cross the blood-brain barrier (BBB). Herein, we present a nanocarrier system that can transfer chitosan nanospheres loaded with N-benzyloxycarbonyl-Asp(OMe)-Glu(OMe)-Val-Asp(OMe)-fluoromethyl ketone (Z-DEVD-FMK), a relatively specific caspase-3 inhibitor, across BBB. Caspase-3 was chosen as a pharmacological target because of its central role in cell death. Polyethylene glycol-coated nanospheres were conjugated to an anti-mouse transferrin receptor monoclonal antibody (TfRMAb) that selectively recognizes the TfR type 1 on the cerebral vasculature. We demonstrate with intravital microscopy that this nanomedicine is rapidly transported across the BBB without being measurably taken up by liver and spleen. Pre- or post-treatment (2 h) with intravenously injected Z-DEVD-FMK-loaded nanospheres dose dependently decreased the infarct volume, neurological deficit, and ischemia-induced caspase-3 activity in mice subjected to 2 h of MCA occlusion and 24 h of reperfusion, suggesting that they released an amount of peptide sufficient to inhibit caspase activity. Similarly, nanospheres inhibited physiological caspase-3 activity during development in the neonatal mouse cerebellum on postnatal day 17 after closure of the BBB. Neither nanospheres functionalized with TfRMAb but not loaded with Z-DEVD-FMK nor nanospheres lacking TfRMAb but loaded with Z-DEVD-FMK had any effect on either paradigm, suggesting that inhibition of caspase activity and subsequent neuroprotection were due to efficient penetration of the peptide into brain. Thus, chitosan nanospheres open new and exciting opportunities for brain delivery of biologically active peptides that are useful for the treatment of CNS disorders.

Dynamics of chitosan by (1)h NMR relaxation.

The dynamics of chitosan (CS) in solution have been studied by (1)H NMR relaxation [longitudinal (T(1)) and transverse (T(2)) relaxation times and NOE] as a function of the degrees of acetylation (DA, 1-70) and polymerization (DP, 10-1200), temperature (278-343 K), concentration (0.1-30 g/L), and ionic strength (50-400 mM). This analysis points to CS as a semirigid polymer with increased flexibility at higher DA in agreement with reduced electrostatic repulsions between protonated amino groups.

Hyaluronic acid/chitosan-g-poly(ethylene glycol) nanoparticles for gene therapy: an application for pDNA and siRNA delivery.

PURPOSE: To design hyaluronic acid (HA) and chitosan-g-poly(ethylene glycol) (CS-g-PEG) nanoparticles intended for a broad range of gene delivery applications. METHODS: Nanoparticles formulated at different HA/CS-g-PEG mass ratios were developed to associate either pDNA or siRNA. The physico-chemical characteristics, morphology, association efficiency and nuclease protection ability of the nanocarriers were compared for these two molecules. Their biological performance, including transfection effciency, nanoparticle cellular uptake and citotoxicity, was assesed. RESULTS: The resulting nanoparticles showed an adequate size (between 130 and 180 nm), and their surface charge could be modulated according to the nanoparticle composition (from +30 mV to -20 mV). All prototypes exhibited a greater association efficiency and nuclease protection for pDNA than for siRNA. However, cell culture experiments evidenced that HA/CS-g-PEG nanoparticles were effective carriers for the delivery of both, siRNA and pDNA, eliciting a biological response with minimal cytotoxicity. Moreover, experiments performed in the HEK-EGFP-Snail1 cell line showed the potential of the HA/CS-g-PEG nanoparticles to silence the expression of the Snail1 transcription factor, an important mediator in tumor progression. CONCLUSIONS: HA/CS-g-PEG nanoparticles can be easily modulated for the delivery of different types of gene molecules, offering great potential for gene therapy applications, as evidenced by their biological performance.

The dynamics of GATG glycodendrimers by NMR diffusion and quantitative (13)C relaxation.

The dynamics of GATG glycodendrimers have been investigated by NMR translational diffusion and quantitative (13)C relaxation studies (Lipari-Szabo model-free), allowing the determination of the correlation times describing the dendrimer segmental orientational mobility.

Novel amphiphilic chitosan micelles as carriers for hydrophobic anticancer drugs.

Chitosan was grafted with O-methyl-O'-succinylpolyethylene glycol and oleic acid after a two-step carbodiimide coupling. The structural and physicochemical characterization of the compounds confirmed the successful conjugation of the hydrophilic and hydrophobic moieties to the chitosan backbone. The amphiphilic chitosan derivative obtained allowed the formation of polymeric micelles with an average size of 140 nm, a polydispersity index <0.234, and a positive superficial charge. Camptothecin, used as a model hydrophobic drug, was successfully carried into the polymeric micelles with an encapsulation efficiency of 78%. The in vitro drug release was evaluated in simulated gastrointestinal fluids, exhibiting a low release of camptothecin in gastric media and a controlled release in intestinal fluids. Furthermore, it was demonstrated that chitosan micelles were able to stabilize camptothecin, protecting up to 75% of the drug from hydrolysis, preserving its active lactone form. This new chitosan amphiphilic system exhibits great potential to load hydrophobic drugs, acting as a promising delivery system.

Optimal isolation and characterisation of chondroitin sulfate from rabbit fish (Chimaera monstrosa).

Chondroitin sulfate (CS) is a glycosaminoglycan widely explored for cartilage regeneration. Its bioactivity is influenced by sulfation degree and pattern, and distinct sulfation in marine CS may open new therapeutic possibilities. In this context, we studied for the first time the isolation and characterisation of CS from Rabbit Fish (Chimaera monstrosa). We propose an efficient process starting with enzymatic hydrolysis, followed by chemical treatments and ending in membrane purification. All steps were optimised by response surface methodology. Chemical treatment by alkaline-hydroalcoholic precipitation led to 99% purity CS suitable for biomedical and pharmaceutical applications, and treatment by alkaline hydrolysis yielded CS adequate for nutraceutical formulations (89% purity). Molecular weight and sulfation profiles were similar for both materials. Gel permeation chromatography analyses resulted in molecular weights (Mn) of 51-55 kDa. NMR and SAX-HPLC revealed dominant 6S-GalNAc sulfation (4S/6S ratio of 0.4), 17% of GlcA 2S-GalNAc 6S and minor quantities of other disaccharides.

Minimalistic supramolecular proteoglycan mimics by co-assembly of aromatic peptide and carbohydrate amphiphiles.

We report the co-assembly of aromatic carbohydrate and dipeptide amphiphiles under physiological conditions as a strategy to generate minimalistic proteoglycan mimics. The resulting nanofibers present a structural, fluorenylmethoxycarbonyl-diphenylalanine (Fmoc-FF) core and a functional carbohydrate (Fmoc-glucosamine-6-sulfate or -phosphate) shell. The size, degree of bundling and mechanical properties of the assembled structures depend on the chemical nature of the carbohydrate amphiphile used. In cell culture medium, these nanofibers can further organize into supramolecular hydrogels. We demonstrate that, similar to proteoglycans, the assembled gels prolong the stability of growth factors and preserve the viability of cultured cells. Our results demonstrate that this approach can be applied to the design of extracellular matrix (ECM) substitutes for future regenerative therapies.