RESUMEN
Among symptomatic outpatients, subgenomic RNA of severe acute respiratory syndrome coronavirus 2 in nasal midturbinate swab specimens was concordant with antigen detection but remained detectable in 13 (82.1%) of 16 nasopharyngeal swab specimens from antigen-negative persons. Subgenomic RNA in midturbinate swab specimens might be useful for routine diagnostics to identify active virus replication.
Asunto(s)
COVID-19 , SARS-CoV-2 , Pruebas Diagnósticas de Rutina , Humanos , Nasofaringe , ARNRESUMEN
A correlated material in the vicinity of an insulator-metal transition (IMT) exhibits rich phenomenology and a variety of interesting phases. A common avenue to induce IMTs in Mott insulators is doping, which inevitably leads to disorder. While disorder is well known to create electronic inhomogeneity, recent theoretical studies have indicated that it may play an unexpected and much more profound role in controlling the properties of Mott systems. Theory predicts that disorder might play a role in driving a Mott insulator across an IMT, with the emergent metallic state hosting a power-law suppression of the density of states (with exponent close to 1; V-shaped gap) centered at the Fermi energy. Such V-shaped gaps have been observed in Mott systems, but their origins are as-yet unknown. To investigate this, we use scanning tunneling microscopy and spectroscopy to study isovalent Ru substitutions in Sr3(Ir1-xRux)2O7 (0 ≤ x ≤ 0.5) which drive the system into an antiferromagnetic, metallic state. Our experiments reveal that many core features of the IMT, such as power-law density of states, pinning of the Fermi energy with increasing disorder, and persistence of antiferromagnetism, can be understood as universal features of a disordered Mott system near an IMT and suggest that V-shaped gaps may be an inevitable consequence of disorder in doped Mott insulators.
RESUMEN
Limited data highlight the need to understand differences in SARS-CoV-2 omicron (B.1.1.529) variant viral load between the gold standard nasopharyngeal (NP) swab, mid-turbinate (MT)/anterior nasal swabs, oropharyngeal (OP) swabs, and saliva. MT, OP, and saliva samples from symptomatic individuals in Atlanta, GA, in January 2022 and longitudinal samples from a small familial cohort were tested by both RT-PCR and ultrasensitive antigen assays. Higher concentrations in the nares were observed in the familial cohort, but a dominant sample type was not found among 39 cases in the cross-sectional cohort. The composite of positive MT or OP assay for both RT-PCR and antigen assay trended toward higher diagnostic yield but did not achieve significant difference. Our data did not identify a singular preferred sample type for SARS-CoV-2 testing, but higher levels of saliva nucleocapsid, a trend toward higher yield of composite OP/MT result, and association of apparent MT or OP predominance with symptoms warrant further study.
RESUMEN
We describe a new technique to reduce tip and tilt vibrations via the design of adaptive optics controllers in a frequency framework. The method synthesizes controllers by minimizing an H2 norm of the tip and tilt residuals. In this approach, open loop slopes (pseudo-open-loop) are reconstructed from on-sky data and input into off-line simulations of the adaptive optics system. The proposed procedure executes a sequence of off-line closed-loop runs with increasing controller complexity and searches for the controller that minimizes the variance of residuals. Although the method avoids any identification of the vibration and turbulence models during the controller synthesis, the actual models are indirectly constructed as a by-product of the H2 norm minimization. The technique has been implemented on and tested with two operational instruments, namely Paranal's NACO and Gemini-South's GeMS, showing an effective rejection of the main vibrations in the loop and also improving the overall performance of the system over varying turbulence conditions. It is shown that a superior performance is obtained when compared to the standard integrator controller.
Asunto(s)
Algoritmos , Retroalimentación , Aumento de la Imagen/instrumentación , Procesamiento de Señales Asistido por Computador , Telescopios , VibraciónRESUMEN
BACKGROUND: Upper respiratory samples for SARS-CoV-2 detection include the gold standard nasopharyngeal (NP) swab, and mid-turbinate (MT) nasal swabs, oropharyngeal (OP) swabs, and saliva. Following the emergence of the omicron (B.1.1.529) variant, limited preliminary data suggest that OP swabs or saliva samples may be more sensitive than nasal swabs, highlighting the need to understand differences in viral load across different sites. METHODS: MT, OP, and saliva samples were collected from symptomatic individuals presenting for evaluation in Atlanta, GA, in January 2022. Longitudinal samples were collected from a family cohort following COVID-19 exposure to describe detection of viral targets over the course of infection. RESULTS: SARS-CoV-2 RNA and nucleocapsid antigen measurements demonstrated a nares-predominant phenotype in a familial cohort. A consistent dominant location for SARS-CoV-2 was not found among 54 individuals. Positive percent agreement for virus detection in MT, OP and saliva specimens were 66.7 [54.1-79.2], 82.2 [71.1-93.4], and 72.5 [60.3-84.8] by RT-PCR, respectively, and 46.2 [32.6-59.7], 51.2 [36.2-66.1], and 72.0 [59.6-84.4] by ultrasensitive antigen assay. The composite of positive MT or OP assay was not significantly different than either alone for both RT-PCR and antigen assay (PPA 86.7 [76.7-96.6] and 59.5 [44.7-74.4], respectively). CONCLUSIONS: Our data suggest that SARS-CoV-2 nucleocapsid and RNA exhibited similar kinetics and diagnostic yield in three upper respiratory sample types across the duration of symptomatic disease. Collection of OP or combined nasal and OP samples does not appear to increase sensitivity versus validated nasal sampling for rapid detection of viral antigen.
RESUMEN
The impact of repeated sample collection on COVID-19 test performance is unknown. The FDA and CDC currently recommend the primary collection of diagnostic samples to minimize the perceived risk of false-negative findings. We therefore evaluated the association between repeated sample collection and test performance among 325 symptomatic patients undergoing COVID-19 testing in Atlanta, GA. High concordance was found between consecutively collected mid-turbinate samples with both molecular (n = 74, 100% concordance) and antigen-based (n = 147, 97% concordance, kappa = 0.95, CI = 0.88-1.00) diagnostic assays. Repeated sample collection does not decrease COVID-19 test performance, demonstrating that multiple samples can be collected for assay validation and clinical diagnosis.
Asunto(s)
Prueba de COVID-19/métodos , COVID-19/diagnóstico , COVID-19/virología , SARS-CoV-2/aislamiento & purificación , Manejo de Especímenes/métodos , Adolescente , Adulto , Anciano , Anciano de 80 o más Años , Niño , Preescolar , Femenino , Humanos , Lactante , Masculino , Persona de Mediana Edad , Reproducibilidad de los Resultados , Sensibilidad y Especificidad , Cornetes Nasales/virologíaRESUMEN
The National Institutes of Health (NIH) launched the Rapid Acceleration of Diagnostics (RADxSM) Tech initiative to support the development and commercialization of novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) point-of-care test devices. The primary objective of the Clinical Studies Core (CSC) was to perform SARS-CoV-2 device studies involving diverse populations and settings. Within a few months, the infrastructure for clinical studies was developed, including a master protocol, digital study platform, data management system, single IRB, and multi-site partnerships. Data from some studies are being used to support Emergency Use Authorization of novel SARS-CoV-2 test devices. The CSC reduced the typical time and cost of developing medical devices and highlighted the impactful role of academic and NIH partnership in addressing public health needs at a rapid pace during a global pandemic. The structure, deployment, and lessons learned from this experience are widely applicable to future in vitro diagnostic device clinical studies.
RESUMEN
While there has been significant progress in the development of rapid COVID-19 diagnostics, as the pandemic unfolds, new challenges have emerged, including whether these technologies can reliably detect the more infectious variants of concern and be viably deployed in non-clinical settings as "self-tests". Multidisciplinary evaluation of the Abbott BinaxNOW COVID-19 Ag Card (BinaxNOW, a widely used rapid antigen test, included limit of detection, variant detection, test performance across different age-groups, and usability with self/caregiver-administration. While BinaxNOW detected the highly infectious variants, B.1.1.7 (Alpha) first identified in the UK, B.1.351 (Beta) first identified in South Africa, P.1 (Gamma) first identified in Brazil, B.1.617.2 (Delta) first identified in India and B.1.2, a non-VOC, test sensitivity decreased with decreasing viral loads. Moreover, BinaxNOW sensitivity trended lower when devices were performed by patients/caregivers themselves compared to trained clinical staff, despite universally high usability assessments following self/caregiver-administration among different age groups. Overall, these data indicate that while BinaxNOW accurately detects the new viral variants, as rapid COVID-19 tests enter the home, their already lower sensitivities compared to RT-PCR may decrease even more due to user error.
Asunto(s)
Prueba Serológica para COVID-19 , COVID-19/diagnóstico , Sistemas de Atención de Punto , Autoevaluación , Humanos , Límite de Detección , SARS-CoV-2 , Sensibilidad y EspecificidadRESUMEN
BaFe2As2 exhibits properties that are characteristic of the parent compounds of the newly discovered iron (Fe)-based high-T(C) superconductors. By combining real-space imaging of scanning tunneling microscopy and spectroscopy (STM+STS) with momentum-space quantitative low-energy electron diffraction (LEED), we have identified the surface plane of cleaved BaFe2As2 crystals as the As terminated Fe-As layer-the plane where superconductivity occurs. LEED and STM+STS data on the BaFe2As2(001) surface indicate an ordered arsenic (As) terminated metallic surface without reconstruction or lattice distortion. It is surprising that STM images the different Fe-As orbitals associated with the orthorhombic structure, but not the As atoms in the surface plane.