RESUMEN
Surface enhanced Raman spectroscopy (SERS) is a powerful analytical technique that has found application in the trace detection of a wide range of contaminants. In this paper, we report on the fabrication of 2D silver nanodendrites, on silicon chips, synthesized by electrochemical reduction of AgNO3at microelectrodes. The formation of nanodendrites is tentatively explained in terms of electromigration and diffusion of silver ions. Electrochemical characterization suggests that the nanodendrites do not stay electrically connected to the microelectrode. The substrates show SERS activity with an enhancement factor on the order of 106. Density functional theory simulations were carried out to investigate the suitability of the fabricated substrate for pesticide monitoring. These substrates can be functionalized with cyclodextrin macro molecules to help with the detection of molecules with low affinity with silver surfaces. A proof of concept is demonstrated with the detection of the herbicide 2-methyl-4-chlorophenoxyacetic acid (MCPA).
RESUMEN
Immunosensors are promising alternatives as detection platforms for the current gold standards methods. Electrochemical immunosensors have already proven their capability for the sensitive, selective, detection of target biomarkers specific to COVID-19, varying cancers or Alzheimer's disease, etc. Among the electrochemical techniques, electrochemical impedance spectroscopy (EIS) is a highly sensitive technique which examines the impedance of an electrochemical cell over a range of frequencies. There are several important critical requirements for the construction of successful impedimetric immunosensor. The applied surface chemistry and immobilisation protocol have impact on the electroanalytical performance of the developed immunosensors. In this Review, we summarise the building blocks of immunosensors based on EIS, including self-assembly monolayers, nanomaterials, polymers, immobilisation protocols and antibody orientation.
RESUMEN
Escherichia coli are a group of bacteria that are a natural part of the intestinal flora of warm-blooded animals, including humans. Most E. coli are nonpathogenic and essential for the normal function of a healthy intestine. However, certain types, such as Shiga toxin-producing E. coli (STEC), which is a foodborne pathogen, can cause a life-threatening illness. The development of point-of-care devices for the rapid detection of E. coli is of significant interest with regard to ensuring food safety. The most suitable way to distinguish between generic E. coli and STEC is by using nucleic acid-based detection, focusing on the virulence factors. Electrochemical sensors based on nucleic acid recognition have attracted much attention in recent years for use in pathogenic bacteria detection. This review has summarized nucleic acid-based sensors for the detection of generic E. coli and STEC since 2015. First, the sequences of the genes used as recognition probes are discussed and compared to the most recent research regarding the specific detection of general E. coli and STEC. Subsequently, the collected literature regarding nucleic acid-based sensors is described and discussed. The traditional sensors were divided into four categories such as gold, indium tin oxide, carbon-based electrodes, and those using magnetic particles. Finally, we summarized the future trends in nucleic acid-based sensor development for E. coli and STEC including some examples of fully integrated devices.
Asunto(s)
Escherichia coli , Toxina Shiga , Animales , Humanos , Toxina Shiga/genética , Inocuidad de los Alimentos , Microbiología de AlimentosRESUMEN
Wearable sensors for sweat biomarkers can provide facile analyte capability and monitoring for several diseases. In this work, a green wearable sensor for sweat absorption and chloride sensing is presented. In order to produce a sustainable device, polylactic acid (PLA) was used for both the substrate and the sweat absorption pad fabrication. The sensor material for chloride detection consisted of silver-based reference, working, and counter electrodes obtained from upcycled compact discs. The PLA substrates were prepared by thermal bonding of PLA sheets obtained via a flat die extruder, prototyped in single functional layers via CO2 laser cutting, and bonded via hot-press. The effect of cold plasma treatment on the transparency and bonding strength of PLA sheets was investigated. The PLA membrane, to act as a sweat absorption pad, was directly deposited onto the membrane holder layer by means of an electrolyte-assisted electrospinning technique. The membrane adhesion capacity was investigated by indentation tests in both dry and wet modes. The integrated device made of PLA and silver-based electrodes was used to quantify chloride ions. The calibration tests revealed that the proposed sensor platform could quantify chloride ions in a sensitive and reproducible way. The chloride ions were also quantified in a real sweat sample collected from a healthy volunteer. Therefore, we demonstrated the feasibility of a green and integrated sweat sensor that can be applied directly on human skin to quantify chloride ions.
Asunto(s)
Técnicas Biosensibles , Dispositivos Electrónicos Vestibles , Humanos , Sudor , Cloruros , Plata , Poliésteres , Técnicas Biosensibles/métodos , Técnicas Electroquímicas/métodosRESUMEN
Models of electrochemical sensors play a critical role for electronic engineers in designing electrochemical nanosensor-based integrated systems and are also widely used in analyzing chemical reactions to model the current, electrical potential, and impedance occurring at the surface of an electrode. However, the use of jargon and the different perspectives of scientists and electronic engineers often result in different viewpoints on principles of electrochemical models, which can impede the effective development of sensor technology. This paper is aimed to fill the knowledge gap between electronic engineers and scientists by providing a review and an analysis of electrochemical models. First, a brief review of the electrochemical sensor mechanism from a scientist's perspective is presented. Then a general model, which reflects a more realistic situation of nanosensors is proposed from an electronic engineer point of view and a comparison between the Randles Model is given with its application in electrochemical impedance spectroscopy and general sensor design. Finally, with the help of the proposed equivalent model, a cohesive explanation of the scan rate of cyclic voltammetry is discussed. The information of this paper can contribute to enriching the knowledge of electrochemical sensor models for scientists and is also able to guide the electronic engineer on designing next-generation sensor layouts.
RESUMEN
Water is a precious resource that is under threat from a number of pressures, including, for example, release of toxic compounds, that can have damaging effect on ecology and human health. The current methods of water quality monitoring are based on sample collection and analysis at dedicated laboratories. Recently, electrochemical-based methods have attracted a lot of attention for environmental sensing owing to their versatility, sensitivity and their ease of integration with cost effective, smart and portable readout systems. In the present work, we report on the fabrication and characterization of platinum-based interdigitated microband electrodes arrays, and their application for trace detection of copper. Using square wave voltammetry after acidification with mineral acids, a limit of detection of 0.8 µg/L was achieved. Copper detection was also undertaken on river water samples and compared with standard analytical techniques. The possibility of controlling the pH at the surface of the sensors-thereby avoiding the necessity to add mineral acids-was investigated. By applying potentials to drive the water splitting reaction at one comb of the sensor's electrode (the protonator), it was possible to lower the pH in the vicinity of the sensing electrode. Detection of standard copper solutions down to 5 µg/L (ppb) using this technique is reported. This reagent free method of detection opens the way for autonomous, in situ monitoring of pollutants in water bodies.
RESUMEN
Global food production needs to increase in order to meet the demands of an ever growing global population. As resources are finite, the most feasible way to meet this demand is to minimize losses and improve efficiency. Regular monitoring of factors like animal health, soil and water quality for example, can ensure that the resources are being used to their maximum efficiency. Existing monitoring techniques however have limitations, such as portability, turnaround time and requirement for additional reagents. In this work, we explore the use of micro- and nano-scale electrode devices, for the development of an electrochemical sensing platform to digitalize a wide range of applications within the agri-food sector. With this platform, we demonstrate the direct electrochemical detection of pesticides, specifically clothianidin and imidacloprid, with detection limits of 0.22 ng/mL and 2.14 ng/mL respectively, and nitrates with a detection limit of 0.2 µM. In addition, interdigitated electrode structures also enable an in-situ pH control technique to mitigate pH as an interference and modify analyte response. This technique is applied to the analysis of monochloramine, a common water disinfectant. Concerning biosensing, the sensors are modified with bio-molecular probes for the detection of both bovine viral diarrhea virus species and antibodies, over a range of 1 ng/mL to 10 µg/mL. Finally, a portable analogue front end electronic reader is developed to allow portable sensing, with control and readout undertaken using a smart phone application. Finally, the sensor chip platform is integrated with these electronics to provide a fully functional end-to-end smart sensor system compatible with emerging Agri-Food digital decision support tools.
RESUMEN
The use of surface enhanced Raman spectroscopy in the development of low cost, portable sensor devices that can be used in the field for nitroguanidine neonicotinoid insecticide detection is appealing. However, a key challenge to achieving this goal is the lack of detailed analysis and vibrational assignment for the most popular neonicotinoids. To make progress toward this goal, this paper presents an analysis of the bulk Raman and SERS spectra of two neonicotinoids, namely clothianidin and imidacloprid. Combined with first-principles simulations, this allowed assignment of all Raman spectral modes for both molecules. To our knowledge, this is the first report of SERS analysis and vibrational assignment of clothianidin, and a comprehensive assignment and analysis is provided for imidacloprid. Silver nanostructured surfaces were fabricated for qualitative SERS analysis, which provides the characteristic spectra of the target molecules and demonstrates the ability of SERS to sense these molecules at concentrations of 1 ng/mL. These concentrations are on par with high-end chromatographic-mass spectroscopy laboratory methods. These SERS sensors thus allow for the selective and sensitive detection of neonicotinoids and provide complementary qualitative data for the molecules. Furthermore, this technique can be adapted to portable devices for remote sensing applications. Further work focuses on integrating our device with an electronics platform for truly portable residue detection.
RESUMEN
Interfacial metal-oxide systems with ultra-thin oxide layers are of high interest for their use in catalysis. The chemical activity of ultra-thin metal-oxide layers can be substantially enhanced compared to interfacial models with thicker oxide. In this study, we present a Density Functional Theory (DFT) investigation of the structure of ultra-thin rutile layers (one and two TiO2 layers) supported on TiN and the stability of water on these interfacial structures. The rutile layers are stabilized on the TiN surface through the formation of interfacial Ti-O bonds. Charge transfer from the TiN substrate leads to the formation of reduced Ti3+ cations in TiO2. The concentration of Ti3+ is proportionally higher in the ultra-thin oxide, compared to interfacial models with thicker oxide layers. The structure of the one-layer oxide slab is strongly distorted at the interface while the thicker TiO2 layer preserves the rutile structure. The energy cost for the formation of a single O vacancy in the one-layer oxide slab is only 0.5 eV with respect to the ideal interface. For the two-layer oxide slab, the introduction of several vacancies in an already non-stoichiometric system becomes progressively more favourable, which indicates the stability of the highly defective interfaces. Isolated water molecules dissociate when adsorbed at the TiO2 layers. At higher coverages, the preference is for molecular water adsorption. Our ab initio thermodynamics calculations show the fully water covered stoichiometric models as the most stable structure at typical ambient conditions. This behaviour is similar to that observed on thicker oxide in TiO2-TiN interfaces or pure TiO2 surfaces. In contrast, interfacial models with multiple vacancies are most stable at low (reducing) oxygen chemical potential values. The high concentration on reduced Ti3+ introduces significant distortions in the O-defective slab. Whereas, a water monolayer adsorbs dissociatively on the highly distorted 2-layer TiO1.75-TiN interface, where the Ti3+ states lying above the top of the valence band contribute to a significant reduction of the energy gap compared to the stoichiometric TiO2-TiN model. Our results provide a guide for the design of novel interfacial systems containing ultra-thin TiO2 with potential application as photocatalytic water splitting devices.
RESUMEN
OBJECTIVES: The BASHH guidelines recommend molecular tests to aid diagnosis of Trichomonas vaginalis (TV) infection; however many clinics continue to use relatively insensitive techniques (pH, wet-prep microscopy (WPM) and culture). Our objectives were to establish a laboratory pathway for TV testing with the Becton-Dickinson Qx (BDQx) molecular assay, to determine TV prevalence and to identify variables associated with TV detection. METHODS: A prospective study of 901 women attending two urban sexual health services for STI testing was conducted. Women were offered TV BDQx testing in addition to standard of care. Data collected were demographics, symptoms, results of near-patient tests and BDQx results for TV, Chlamydia trachomatis (CT) and Neisseria gonorrhoeae (GC). Women with any positive TV result were treated and followed up for test of cure (TOC). RESULTS: 901 women had a TV BDQx test. 472 (53%) were white, 143 (16%) black and 499 (55%) were symptomatic. Infections detected by BDQx were: 11 TV (1.2%), three GC (0.3%) and 44 CT (4.9%). Of the 11 BDQx-detected TV infections, 8 (73%) were in patients of black ethnicity. Of these, four of seven cases (57%) were WPM-positive. All patients received treatment and nine of nine (100%) were BDQx-negative at TOC. In univariate analysis, only black ethnicity was associated with likelihood of a positive TV BDQx result (relative risk (RR) 10.2 (95% CI 2.15 to 48.4)). CONCLUSIONS: The use of the BDQ enhanced detection of TV in asymptomatic and symptomatic populations. Cost-effective implementation of the test will rely on further work to reliably detect demographic and clinical variables that predict positivity.
Asunto(s)
Técnicas de Diagnóstico Molecular/métodos , Tricomoniasis/diagnóstico , Trichomonas vaginalis/genética , Adolescente , Adulto , Anciano , Femenino , Gonorrea/diagnóstico , Gonorrea/epidemiología , Gonorrea/microbiología , Humanos , Concentración de Iones de Hidrógeno , Londres/epidemiología , Persona de Mediana Edad , Neisseria gonorrhoeae/genética , Neisseria gonorrhoeae/aislamiento & purificación , Técnicas de Amplificación de Ácido Nucleico/métodos , Prevalencia , Estudios Prospectivos , Tricomoniasis/epidemiología , Tricomoniasis/etnología , Trichomonas vaginalis/aislamiento & purificación , Servicios Urbanos de Salud , Vagina/química , Vagina/parasitología , Adulto JovenRESUMEN
A sub-wavelength grating-based photonic crystal sensor is designed to excite two spectrally and spatially different guided mode resonances that have distinctive electric field distributions. We present and validate the uni-polarized dual resonance approach to separating bulk index perturbations from surface-binding events in a single measurement by monitoring the resonance wavelength shifts. This self-referencing method will reduce errors in the measurement of biomolecule binding events on sensor surfaces in a perturbed environmental background.
Asunto(s)
Técnicas Biosensibles/métodos , Fenómenos Ópticos , Fotones , Propiedades de SuperficieRESUMEN
In this paper, we describe the fabrication, simulation and characterization of dense arrays of freestanding silver capped polystyrene nanotubes, and demonstrate their suitability for surface enhanced Raman scattering (SERS) applications. Substrates are fabricated in a rapid, low-cost and scalable way by melt wetting of polystyrene (PS) in an anodized alumina (AAO) template, followed by silver evaporation. Scanning electron microscopy reveals that substrates are composed of a dense array of freestanding polystyrene nanotubes topped by silver nanocaps. SERS characterization of the substrates, employing a monolayer of 4-aminothiophenol (4-ABT) as a model molecule, exhibits an enhancement factor of â¼1.6 × 10(6), in agreement with 3D finite difference time domain simulations. Contact angle measurements of the substrates revealed super-hydrophobic properties, allowing pre-concentration of target analyte into a small volume. These super-hydrophobic properties of the samples are taken advantage of for sensitive detection of the organic pollutant crystal violet, with detection down to â¼400 ppt in a 2 µl aliquot demonstrated.
RESUMEN
Wafer-scale nano-fabrication of silicon nitride (Si x N y ) photonic crystal (PhC) structures on glass (quartz) substrates is demonstrated using a thin (30 nm) chromium (Cr) layer as the hard mask for transferring the electron beam lithography (EBL) defined resist patterns. The use of the thin Cr layer not only solves the charging effect during the EBL on the insulating substrate, but also facilitates high aspect ratio PhCs by acting as a hard mask while deep etching into the Si x N y . A very high aspect ratio of 10:1 on a 60 nm wide grating structure has been achieved while preserving the quality of the flat top of the narrow lines. The presented nano-fabrication method provides PhC structures necessary for a high quality optical response. Finally, we fabricated a refractive index based PhC sensor which shows a sensitivity of 185 nm per RIU.
RESUMEN
Novel poly(9,9-dioctlylfluorene) (PFO) nanofibers were fabricated by solution template wetting of anodic aluminum oxide (AAO) templates with a pore diameter of 25 nm. Individual nanofibers displayed a pronounced axially polarized luminescence with a typical emission dichroic ratio of 15 and low spread of the emissive species angular distribution. The strong optical characteristics were ascribed to intrachain reorientation of amorphous PFO to a more planar and elongated ß-phase conformation induced by mechanical strain during polymer template pore infiltration. Absorption optical spectroscopy on nanofiber mats confirmed formation of 24% ß-phase emissive segments, which dominated the nanofiber luminescence characteristics. X-ray diffraction measurements were used to confirm and quantify the extent of nanofiber internal molecular alignment.
RESUMEN
Miniaturization is the trend to manufacture ever smaller devices and this process requires knowledge, experience, understanding of materials, manufacturing techniques and scaling laws. The fabrication techniques used in semiconductor industry deliver an exceptionally high yield of devices and provide a well-established platform. Today, these miniaturized devices are manufactured with high reproducibility, design flexibility, scalability and multiplexed features to be used in several applications including micro-, nano-fluidics, implantable chips, diagnostics/biosensors and neural probes. We here provide a review on the microfabricated devices used for biology driven science. We will describe the ubiquity of the use of micro-nanofabrication techniques in biology and biotechnology through the fabrication of high-aspect-ratio devices for cell sensing applications, intracellular devices, probes developed for neuroscience-neurotechnology and biosensing of the certain biomarkers. Recently, the research on micro and nanodevices for biology has been progressing rapidly. While the understanding of the unknown biological fields -such as human brain- has been requiring more research with advanced materials and devices, the development protocols of desired devices has been advancing in parallel, which finally meets with some of the requirements of biological sciences. This is a very exciting field and we aim to highlight the impact of micro-nanotechnologies that can shed light on complex biological questions and needs.
Asunto(s)
Técnicas Biosensibles , Microtecnología , Humanos , Silicio , Reproducibilidad de los Resultados , BiologíaRESUMEN
Modern bioengineering utilises biomimetic cell culture approaches to control cell fate during in vitro expansion. In this spirit, herein we assessed the influence of bidirectional surface topography, substrate rigidity, collagen type I coating and macromolecular crowding (MMC) in human bone marrow stem cell cultures. In the absence of MMC, surface topography was a strong modulator of cell morphology. MMC significantly increased extracellular matrix deposition, albeit in a globular manner, independently of the surface topography, substrate rigidity and collagen type I coating. Collagen type I coating significantly increased cell metabolic activity and none of the assessed parameters affected cell viability. At day 14, in the absence of MMC, none of the assessed genes was affected by surface topography, substrate rigidity and collagen type I coating, whilst in the presence of MMC, in general, collagen type I α1 chain, tenascin C, osteonectin, bone sialoprotein, aggrecan, cartilage oligomeric protein and runt-related transcription factor were downregulated. Interestingly, in the presence of the MMC, the 1000 kPa grooved substrate without collagen type I coating upregulated aggrecan, cartilage oligomeric protein, scleraxis homolog A, tenomodulin and thrombospondin 4, indicative of tenogenic differentiation. This study further supports the notion for multifactorial bioengineering to control cell fate in culture.
Asunto(s)
Médula Ósea , Colágeno Tipo I , Humanos , Colágeno Tipo I/metabolismo , Agrecanos , Médula Ósea/metabolismo , Células Cultivadas , Técnicas de Cultivo de CélulaRESUMEN
Due to their inherent plasticity, dermal fibroblasts hold great promise in regenerative medicine. Although biological signals have been well-established as potent regulators of dermal fibroblast function, it is still unclear whether physiochemical cues can induce dermal fibroblast trans-differentiation. Herein, we evaluated the combined effect of surface topography, substrate rigidity, collagen type I coating and macromolecular crowding in human dermal fibroblast cultures. Our data indicate that tissue culture plastic and collagen type I coating increased cell proliferation and metabolic activity. None of the assessed in vitro microenvironment modulators affected cell viability. Anisotropic surface topography induced bidirectional cell morphology, especially on more rigid (1,000 kPa and 130 kPa) substrates. Macromolecular crowding increased various collagen types, but not fibronectin, deposition. Macromolecular crowding induced globular extracellular matrix deposition, independently of the properties of the substrate. At day 14 (longest time point assessed), macromolecular crowding downregulated tenascin C (in 9 out of the 14 groups), aggrecan (in 13 out of the 14 groups), osteonectin (in 13 out of the 14 groups), and collagen type I (in all groups). Overall, our data suggest that physicochemical cues (such surface topography, substrate rigidity, collagen coating and macromolecular crowding) are not as potent as biological signals in inducing dermal fibroblast trans-differentiation.
RESUMEN
Polarization dependent transmission through thin gold films bearing arrays of elliptical nanopores and assembled at transparent substrates is explored. Far field transmission spectra with incident light polarized along the short and long axis of the ellipses show asymmetric peaks. Near-field finite difference time domain simulated electric field profiles suggest these features are related to Fano resonances between the (± 1, 0) Surface Plasmon Polariton mode and the ( ± 1, 0) Rayleigh Anomaly. The unique spectral signature of these samples makes them attractive for visible and near infrared tags for anti-counterfeiting applications.
Asunto(s)
Óptica y Fotónica , Resonancia por Plasmón de Superficie/métodos , Anisotropía , Electricidad , Diseño de Equipo , Vidrio/química , Oro/química , Iones , Luz , Microscopía de Fuerza Atómica/métodos , Microscopía Electrónica de Rastreo/métodos , Nanoporos , Refractometría , Dispersión de RadiaciónRESUMEN
In this work electrochemical sensors fabricated from compact disc material (waste or new) are used to quantify chloride ions in different types of samples. All three electrodes, working, counter, and pseudo-reference electrodes, were fabricated from the compact disc and directly used. Different parameters were studied in order to demonstrate the possibility of using this waste material for efficient and low-cost electrochemical sensors. Chloride sensing performance was evaluated using linear scan voltammetry as the detection technique. A sensitivity of 0.174 mA mM-1 cm-2 with a limit of detection of 20 µM and excellent selectivity against many interferents was observed. Selectivity and reproducibility tests were also carried out, showing excellent results. Sensors were also validated with real samples (drinking and sea water, milk, sweat and physiological solutions) with results comparable to conventional techniques. Our results show the applicability and suitability of these low-cost sensors, for detection of those analytes for which, silver, has high sensitivity and selectivity.
Asunto(s)
Cloruros , Técnicas Electroquímicas , Discos Compactos , Electrodos , Reproducibilidad de los ResultadosRESUMEN
Immunoglobulin G (IgG), a type of antibody, represents approximately 75% of serum antibodies in humans, and is the most common type of antibody found in blood circulation. Consequently, the development of simple, fast and reliable systems for IgG detection, which can be achieved using electrochemical sandwich-type immunosensors, is of considerable interest. In this study we have developed an immunosensor for human (H)-IgG using an inexpensive and very simple fabrication method based on ZnO nanorods (NRs) obtained through the electrodeposition of ZnO. The ZnO NRs were treated by electrodepositing a layer of reduced graphene oxide (rGO) to ensure an easy immobilization of the antibodies. On Indium Tin Oxide supported on Polyethylene Terephthalate/ZnO NRs/rGO substrate, the sandwich configuration of the immunosensor was built through different incubation steps, which were all optimized. The immunosensor is electrochemically active thanks to the presence of gold nanoparticles tagging the secondary antibody. The immunosensor was used to measure the current density of the hydrogen development reaction which is indirectly linked to the concentration of H-IgG. In this way the calibration curve was constructed obtaining a logarithmic linear range of 10-1000 ng/mL with a detection limit of few ng/mL and good sensitivity.