Dual-chirp-based photonic THz-ISAC system with adaptive frequency synchronization.

Recent advancements have brought significant attention to photonic terahertz (THz)-integrated sensing and communication (ISAC) systems. In this work, we present an adaptive frequency offset (FO) compensation method for dual-chirp-based ISAC waveforms, using the fractional Fourier transform (FrFT) method. The proposed scheme can enable frequency synchronization without a need for training preambles and exhibit robustness against system noise. We validate this approach through an experimental demonstration in a 300 GHz photonic THz-ISAC system with 20 Gbps quadrature-phase shift keying (QPSK) data transmission and 1.5 cm range resolution. The experiment successfully compensates for frequency offsets ranging from -5 to 5 GHz, achieving an estimation error of less than 0.08% and a chirp-pilot power overhead of 0.5%.

High bitrate data transmission in the 8-14 µm atmospheric window using an external Stark-effect modulator with digital equalization.

High bitrate mid-infrared links using simple (NRZ) and multi-level (PAM-4) data coding schemes have been realized in the 8 µm to 14 µm atmospheric transparency window. The free space optics system is composed of unipolar quantum optoelectronic devices, namely a continuous wave quantum cascade laser, an external Stark-effect modulator and a quantum cascade detector, all operating at room-temperature. Pre- and post-processing are implemented to get enhanced bitrates, especially for PAM-4 where inter-symbol interference and noise are particularly detrimental to symbol demodulation. By exploiting these equalization procedures, our system, with a full frequency cutoff of 2 GHz, has reached transmission bitrates of 12 Gbit/s NRZ and 11 Gbit/s PAM-4 fulfilling the 6.25 % overhead hard-decision forward error correction threshold, limited only by the low signal-to-noise ratio of our detector.

Silica micro-rod resonator-based Kerr frequency comb for high-speed short-reach optical interconnects.

Conventional data center interconnects rely on power-hungry arrays of discrete wavelength laser sources. However, growing bandwidth demand severely challenges ensuring the power and spectral efficiency toward which data center interconnects tend to strive. Kerr frequency combs based on silica microresonators can replace multiple laser arrays, easing the pressure on data center interconnect infrastructure. Therefore, we experimentally demonstrate a bit rate of up to 100 Gbps/λ employing 4-level pulse amplitude modulated signal transmission over a 2 km long short-reach optical interconnect that can be considered a record using any Kerr frequency comb light source, specifically based on a silica micro-rod. In addition, data transmission using the non-return to zero on-off keying modulation format is demonstrated to achieve 60 Gbps/λ. The silica micro-rod resonator-based Kerr frequency comb light source generates an optical frequency comb in the optical C-band with 90 GHz spacing between optical carriers. Data transmission is supported by frequency domain pre-equalization techniques to compensate amplitude-frequency distortions and limited bandwidths of electrical system components. Additionally, achievable results are enhanced with offline digital signal processing, implementing post-equalization using feed-forward and feedback taps.

Optical amplification-free deep reservoir computing-assisted high-baudrate short-reach communication.

An optical amplification-free deep reservoir computing (RC)-assisted high-baudrate intensity modulation direct detection (IM/DD) system is experimentally demonstrated using a 100G externally modulated laser operated in C-band. We transmit 112 Gbaud 4-level pulse amplitude modulation (PAM4) and 100 Gbaud 6-level PAM (PAM6) signals over a 200-m single-mode fiber (SMF) link without any optical amplification. The decision feedback equalizer (DFE), shallow RC, and deep RC are adopted in the IM/DD system to mitigate impairment and improve transmission performance. Both PAM transmissions over a 200-m SMF with bit error rate (BER) performance below 6.25% overhead hard-decision forward error correction (HD-FEC) threshold are achieved. In addition, the BER of the PAM4 signal is below the KP4-FEC limit after 200-m SMF transmission enabled by the RC schemes. Thanks to the use of a multiple-layer structure, the number of weights in deep RC has been reduced by approximately 50% compared with the shallow RC, whereas the performance is comparable. We believe that the optical amplification-free deep RC-assisted high-baudrate link has a promising application in intra-data center communications.

Simultaneous modulation format identification and OSNR monitoring based on optoelectronic reservoir computing.

An approach for simultaneous modulation format identification (MFI) and optical signal-to-noise ratio (OSNR) monitoring in digital coherent optical communications is proposed based on optoelectronic reservoir computing (RC) and the signal's amplitude histograms (AHs) obtained after the adaptive post-equalization. The optoelectronic RC is implemented using a Mach-Zehnder modulator and optoelectronic delay feedback loop. We investigate the performance of the proposed model with the number of symbols, bins of AHs and the hyperparameters of optoelectronic RC. The results show that 100% MFI accuracy can be achieved simultaneously with accurate OSNR estimation for different modulation formats under study. The lowest achievable OSNR estimation mean absolute errors for the dual-polarization (DP)-quadrature phase-shift keying signal, the DP-16-ary quadrature amplitude modulation (16QAM) signal, and the DP-64QAM signal are 0.2 dB, 0.32 dB and 0.53 dB, respectively. The robustness of the proposed scheme is also evaluated when the optoelectronic RC is in presence of additive white Gaussian noises. Then, a proof of concept experiment is demonstrated to further verify our proposed method. The proposed approach offers a potential solution for next-generation intelligent optical performance monitoring in the physical layer.

Hybrid fiber-THz fronthaul supporting up to 16384-QAM-OFDM with the delta-sigma modulation.

With the progress of high-capacity radio access networks, ultra-dense small cells are rapidly being deployed in urban areas. As a result, the deployment of a large number of optical fibers in urban areas becomes a severe issue. In this Letter, we propose a hybrid fiber-terahertz (THz) mobile fronthaul system supporting flexible and high-order wireless signal transmission with the delta-sigma modulation. The photonic THz transmission is used as the seamless extension of fiber-based fronthaul in small cells. A 20-Gbit/s digital fiber-THz fronthaul system is experimentally demonstrated to validate the proposed scheme, with 10-km optical fiber transmission and 300-GHz wireless relay. Carrier aggregation of up to 10 40-MHz and 60-MHz 5G-new radio (5G-NR) channels at the radio carrier frequency of 3.9 GHz is reported. The design of quantization noise suppressed delta-sigma modulation enables the system to transmit orthogonal frequency division multiplexing (OFDM) modulation up to  16384 order quadrate amplitude modulation (QAM) mapping with the error vector magnitude (EVM) below 0.5%.

Human recognition with the optoelectronic reservoir-computing-based micro-Doppler radar signal processing.

Current perception and monitoring systems, such as human recognition, are affected by several environmental factors, such as limited light intensity, weather changes, occlusion of targets, and public privacy. Human recognition using radar signals is a promising direction to overcome these defects; however, the low signal-to-noise ratio of radar signals still makes this task challenging. Therefore, it is necessary to use suitable tools that can efficiently deal with radar signals to identify targets. Reservoir computing (RC) is an efficient machine learning scheme that is easy to train and demonstrates excellent performance in processing complex time-series signals. The RC hardware implementation structure based on nonlinear nodes and delay feedback loops endows it with the potential for real-time fast signal processing. In this paper, we numerically study the performance of the optoelectronic RC composed of optical and electrical components in the task of human recognition with noisy micro-Doppler radar signals. A single-loop optoelectronic RC is employed to verify the application of RC in this field, and a parallel dual-loop optoelectronic RC scheme with a dual-polarization Mach-Zehnder modulator (DPol-MZM) is also used for performance comparison. The result is verified to be comparable with other machine learning tools, which demonstrates the ability of the optoelectronic RC in capturing gait information and dealing with noisy radar signals; it also indicates that optoelectronic RC is a powerful tool in the field of human target recognition based on micro-Doppler radar signals.

FPGA-Implemented Fractal Decoder with Forward Error Correction in Short-Reach Optical Interconnects.

Forward error correction (FEC) codes combined with high-order modulator formats, i.e., coded modulation (CM), are essential in optical communication networks to achieve highly efficient and reliable communication. The task of providing additional error control in the design of CM systems with high-performance requirements remains urgent. As an additional control of CM systems, we propose to use indivisible error detection codes based on a positional number system. In this work, we evaluated the indivisible code using the average probability method (APM) for the binary symmetric channel (BSC), which has the simplicity, versatility and reliability of the estimate, which is close to reality. The APM allows for evaluation and compares indivisible codes according to parameters of correct transmission, and detectable and undetectable errors. Indivisible codes allow for the end-to-end (E2E) control of the transmission and processing of information in digital systems and design devices with a regular structure and high speed. This study researched a fractal decoder device for additional error control, implemented in field-programmable gate array (FPGA) software with FEC for short-reach optical interconnects with multilevel pulse amplitude (PAM-M) modulated with Gray code mapping. Indivisible codes with natural redundancy require far fewer hardware costs to develop and implement encoding and decoding devices with a sufficiently high error detection efficiency. We achieved a reduction in hardware costs for a fractal decoder by using the fractal property of the indivisible code from 10% to 30% for different n while receiving the reciprocal of the golden ratio.

Kernel mapping for mitigating nonlinear impairments in optical short-reach communications.

Nonlinear impairments induced by the opto-electronic components are one of the fundamental performance-limiting factors in high-speed optical short-reach communications, significantly hindering capacity improvement. This paper proposes to employ a kernel mapping function to map the signals in a Hilbert space to its inner product in a reproducing kernel Hilbert space, which has been successfully demonstrated to mitigate nonlinear impairments in optical short-reach communication systems. The operation principle is derived. An intensity modulation/direct detection system with 1.5-µm vertical cavity surface emitting laser and 10-km 7-core fiber achieving 540.68-Gbps (net-rate 505.31-Gbps) has been carried out. The experimental results reveal that the kernel mapping based schemes are able to realize comparable transmission performance as the Volterra filtering scheme even with a high order.

Reconfigurable frequency coding of triggered single photons in the telecom C-band.

In this work, we demonstrate reconfigurable frequency manipulation of quantum states of light in the telecom C-band. Triggered single photons are encoded in a superposition state of three channels using sidebands up to 53 GHz created by an off-the-shelf phase modulator. The single photons are emitted by an InAs/GaAs quantum dot grown by metal-organic vapor-phase epitaxy within the transparency window of the backbone fiber optical network. A cross-correlation measurement of the sidebands demonstrates the preservation of the single photon nature; an important prerequisite for future quantum technology applications using the existing telecommunication fiber network.

Multi-channel collision-free reception for optical interconnects.

A multi-channel reception scheme that allows each node to receive an arbitrary set of wavelengths simultaneously (i.e., collision-free) is proposed for optical interconnects. The proposed scheme only needs to use a few receivers and fixed-wavelength filters that are designed based on error-control coding theory. Experiments with up to four channel collision-free reception units are carried out to demonstrate the feasibility of the proposed scheme.

Real-time 100 Gbps/λ/core NRZ and EDB IM/DD transmission over multicore fiber for intra-datacenter communication networks.

A BiCMOS chip-based real-time intensity modulation/direct detection spatial division multiplexing system is experimentally demonstrated for both optical interconnects. 100 Gbps/λ/core electrical duobinary (EDB) transmission over 1 km 7-core multicore fiber (MCF) is carried out, achieving KP4 forward error correction (FEC) limit (BER < 2E-4). Using optical dispersion compensation, 7 × 100 Gbps/λ/core transmission of both non-return-to-zero (NRZ) and EDB signals over 10 km MCF transmission is achieved with BER lower than 7% overhead hard-decision FEC limit (BER < 3.8E-3). The integrated low complexity transceiver IC and analog signal processing approach make such a system highly attractive for the high-speed intra-datacenter interconnects.

Spectrally efficient digitized radio-over-fiber system with k-means clustering-based multidimensional quantization.

We propose a spectrally efficient digitized radio-over-fiber (D-RoF) system by grouping highly correlated neighboring samples of the analog signals into multidimensional vectors, where the k-means clustering algorithm is adopted for adaptive quantization. A 30 Gbit/s D-RoF system is experimentally demonstrated to validate the proposed scheme, reporting a carrier aggregation of up to 40 100 MHz orthogonal frequency division multiplexing (OFDM) channels with quadrate amplitude modulation (QAM) order of 4 and an aggregation of 10 100 MHz OFDM channels with a QAM order of 16384. The equivalent common public radio interface rates from 37 to 150 Gbit/s are supported. Besides, the error vector magnitude (EVM) of 8% is achieved with the number of quantization bits of 4, and the EVM can be further reduced to 1% by increasing the number of quantization bits to 7. Compared with conventional pulse coding modulation-based D-RoF systems, the proposed D-RoF system improves the signal-to-noise-ratio up to ∼9 dB and greatly reduces the EVM, given the same number of quantization bits.

Nonlinearity-aware 200 Gbit/s DMT transmission for C-band short-reach optical interconnects with a single packaged electro-absorption modulated laser.

We experimentally demonstrate the transmission of a 200 Gbit/s discrete multitone (DMT) at the soft forward error correction limit in an intensity-modulation direct-detection system with a single C-band packaged distributed feedback laser and traveling-wave electro absorption modulator (DFB-TWEAM), digital-to-analog converter and photodiode. The bit-power loaded DMT signal is transmitted over 1.6 km standard single-mode fiber with a net rate of 166.7 Gbit/s, achieving an effective electrical spectrum efficiency of 4.93 bit/s/Hz. Meanwhile, net rates of 174.2 Gbit/s and 179.5 Gbit/s are also demonstrated over 0.8 km SSMF and in an optical back-to-back case, respectively. The feature of the packaged DFB-TWEAM is presented. The nonlinearity-aware digital signal processing algorithm for channel equalization is mathematically described, which improves the signal-to-noise ratio up to 3.5 dB.

Digital mobile fronthaul employing differential pulse code modulation with suppressed quantization noise.

A differential pulse code modulation (DPCM) based digital mobile fronthaul architecture is proposed and experimentally demonstrated. By using a linear predictor in the DPCM encoding process, the quantization noise can be effectively suppressed and a prediction gain of 7~8 dB can be obtained. Experimental validation is carried out with a 20 km 15-Gbaud/λ 4-level pulse amplitude modulation (PAM4) intensity modulation and direct detection system. The results verify the feasibility of supporting 163, 122, 98, 81 20-MHz 4, 16, 64, 256 QAM based antenna-carrier (AxC) containers with only 3, 4, 5, 6 quantization bits at a sampling rate of 30.72MSa/s in LTE-A environment. Further increasing the number of quantization bits to 8 and 9, 1024 quadrature amplitude modulation (1024 QAM) and 4096 QAM transmission can be realized with error vector magnitude (EVM) lower than 1% and 0.5%, respectively. The supported number of AxCs in the proposed DPCM-based fronthaul is increased and the EVM is greatly reduced compared to the common public radio interface (CPRI) based fronthaul that uses pulse code modulation. Besides, the DPCM-based fronthaul is also experimentally demonstrated to support universal filtered multicarrier signal that is one candidate waveform for the 5th generation mobile systems.

Gigabit free-space multi-level signal transmission with a mid-infrared quantum cascade laser operating at room temperature.

Gigabit free-space transmissions are experimentally demonstrated with a quantum cascaded laser (QCL) emitting at mid-wavelength infrared of 4.65 µm, and a commercial infrared photovoltaic detector. The QCL operating at room temperature is directly modulated using on-off keying and, for the first time, to the best of our knowledge, four- and eight-level pulse amplitude modulations (PAM-4, PAM-8). By applying pre- and post-digital equalizations, we achieve up to 3 Gbit/s line data rate in all three modulation configurations with a bit error rate performance of below the 7% overhead hard decision forward error correction limit of 3.8×10-3. The proposed transmission link also shows a stable operational performance in the lab environment.

Impact of local oscillator frequency noise on coherent optical systems with electronic dispersion compensation.

A theoretical investigation of the equalization-enhanced phase noise (EEPN) and its mitigation is presented. We show with a frequency domain analysis that the EEPN results from the non-linear inter-mixing between the sidebands of the dispersed signal and the noise sidebands of the local oscillator. It is further shown and validated with system simulations that the transmission penalty is mainly due to the slow optical frequency fluctuations of the local oscillator. Hence, elimination of the frequency noise below a certain cut-off frequency significantly reduces the transmission penalty, even when frequency noise would otherwise cause an error floor. The required cut-off frequency increases linearly with the white frequency noise level and hence the linewidth of the local oscillator laser, but is virtually independent of the symbol rate and the accumulated dispersion.

Unipolar quantum optoelectronics for high speed direct modulation and transmission in 8-14 µm atmospheric window.

The large mid-infrared (MIR) spectral region, ranging from 2.5 µm to 25 µm, has remained under-exploited in the electromagnetic spectrum, primarily due to the absence of viable transceiver technologies. Notably, the 8-14 µm long-wave infrared (LWIR) atmospheric transmission window is particularly suitable for free-space optical (FSO) communication, owing to its combination of low atmospheric propagation loss and relatively high resilience to turbulence and other atmospheric disturbances. Here, we demonstrate a direct modulation and direct detection LWIR FSO communication system at 9.1 µm wavelength based on unipolar quantum optoelectronic devices with a unprecedented net bitrate exceeding 55 Gbit s-1. A directly modulated distributed feedback quantum cascade laser (DFB-QCL) with high modulation efficiency and improved RF-design was used as a transmitter while two high speed detectors utilizing meta-materials to enhance their responsivity are employed as receivers; a quantum cascade detector (QCD) and a quantum-well infrared photodetector (QWIP). We investigate system tradeoffs and constraints, and indicate pathways forward for this technology beyond 100 Gbit s-1 communication.

Simultaneous RZ-OOK to NRZ-OOK and RZ-DPSK to NRZ-DPSK format conversion in a silicon microring resonator.

Simultaneous RZ-OOK to NRZ-OOK and RZ-DPSK to NRZ-DPSK modulation format conversion in a single silicon microring resonator with free spectral range equal to twice the signal bit rate is experimentally demonstrated for the first time at 41.6 Gb/s. By utilizing an optimized custom-made microring resonator with high coupling coefficient followed by an optical bandpass filter with appropriate bandwidth, good conversion performances for both modulation formats are achieved according to the converted signals eye diagrams and bit-error-rate measurements.

Integrated dual-laser photonic chip for high-purity carrier generation enabling ultrafast terahertz wireless communications.

Photonic generation of Terahertz (THz) carriers displays high potential for THz communications with a large tunable range and high modulation bandwidth. While many photonics-based THz generations have recently been demonstrated with discrete bulky components, their practical applications are significantly hindered by the large footprint and high energy consumption. Herein, we present an injection-locked heterodyne source based on generic foundry-fabricated photonic integrated circuits (PIC) attached to a uni-traveling carrier photodiode generating high-purity THz carriers. The generated THz carrier is tunable within the range of 0-1.4 THz, determined by the wavelength spacing between the two monolithically integrated distributed feedback (DFB) lasers. This scheme generates and transmits a 131 Gbits-1 net rate signal over a 10.7-m distance with -24 dBm emitted power at 0.4 THz. This monolithic dual-DFB PIC-based THz generation approach is a significant step towards fully integrated, cost-effective, and energy-efficient THz transmitters.