Combining Step-Growth and Chain-Growth Polymerizations in One Pot: Light-Induced Fabrication of Conductive Nanoporous PEDOT-PCL Scaffold.

A novel method based on light-induced fabrication of a poly (3,4-ethylenedioxythiophene)-polycaprolactone (PEDOT-PCL) scaffold using phenacyl bromide (PAB) as a single-component photoinitiator is presented. HBr released from the step-growth polymerization of EDOT is utilized as an in situ catalyst for the chain-growth polymerization of ε-caprolactone. Detailed investigations disclose the formation of a self-assembled nanoporous electroconductive scaffold (1.2 mS cm-1 ). Fluorescence emission spectra of the fabricated scaffold exhibit a mixed solvatochromic behavior, indicating specific interactions between the self-assembled scaffold and solvents with varying polarities, as evidenced by transmission electron microscopy (TEM). Moreover, the same light-induced technique can also be applied for bulk photopolymerization showcasing the versatility and wide-ranging scope of the originated method. In brief, this study introduces a novel approach for light-induced polymerization reactions that is merging step-growth and chain-growth mechanisms. This innovative approach is promising to facilitate in situ polymerization of monomers possessing diverse functionalities.

Thienothiophene-based organic light-emitting diode: synthesis, photophysical properties and application.

A donor-π-acceptor (D-π-A)-type pull-push compound, DMB-TT-TPA (8), comprising triphenylamine as donor and dimesitylboron as acceptor linked through a thieno[3,2-b]thiophene (TT) π-conjugated linker bearing a 4-MeOPh group, was designed, synthesized, and fabricated as an emitter via a solution process for an organic light-emitting diode (OLED) application. DMB-TT-TPA (8) exhibited absorption and emission maxima of 411 and 520 nm, respectively, with a mega Stokes shift of 109 nm and fluorescence quantum yields both in the solid state (41%) and in solution (86%). The optical properties were supported by computational chemistry using density functional theory for optimized geometry and absorption. A solution-processed OLED was fabricated using low turn-on voltage, which had performances with maximum power, current, and external quantum efficiencies of 6.70 lm/W, 10.6 cd/A, and 4.61%, respectively.

Screening of Hallucinogenic Compounds and Genomic Characterisation of 40 Anatolian Salvia Species.

INTRODUCTION: Salvia, an important and widely available member of Lamiaceae family. Although comparative analysis on secondary metabolites in several Salvia species from Turkey has been reported, their hallucinogenic chemicals have not been screened thoroughly. OBJECTIVE: This study provides LC-MS/MS analysis of 40 Salvia species for screening their psychoactive constituents of salvinorin A and salvinorin B. 5S-rRNA gene non-coding region of Salvia plants was sequenced, aligned and compared with that sequence of Salvia divinorum plant. METHODOLOGY: Targeted molecules of salvinorin A and salvinorin B were quantified, using LC-MS/MS, from all aerial parts of 40 Salvia species, collected from different parts of Turkey. Regions of 5S-rRNA gene from different species were amplified by polymerase chain reaction and DNA sequences were aligned with Salvia divinorum DNA sequences. RESULTS: Very few of the Salvia species (S. recognita, S. cryptantha and S. glutinosa) contained relatively high levels of salvinorin A (212.86 ± 20.46 µg/g, 51.50 ± 4.95 µg/g and 38.92 ± 3.74 µg/g, respectively). Salvinorin B was also found in Salvia species of S. potentillifolia, S. adenocaulon and S. cryptantha as 2351.99 ± 232.22 µg/g, 768.78 ± 75.90 µg/g and 402.24 ± 39.71 µg/g, respectively. The sequences of 5S-rRNA gene of 40 different Salvia species were presented and it was found that none of the Salvia species in Turkey had similar DNA sequence to Salvia divinorum plant. CONCLUSION: This is the first report of screening 40 Salvia species in Turkey according to their psychoactive constituents, salvinorin A and salvinorin B and their genomic structures. It is possible that some of these Salvia species may exhibit some psycho activity. Thus, they need to be screened further. Copyright © 2017 John Wiley & Sons, Ltd.

Triarylborane-Based Materials for OLED Applications.

Multidisciplinary research on organic fluorescent molecules has been attracting great interest owing to their potential applications in biomedical and material sciences. In recent years, electron deficient systems have been increasingly incorporated into fluorescent materials. Triarylboranes with the empty p orbital of their boron centres are electron deficient and can be used as strong electron acceptors in conjugated organic fluorescent materials. Moreover, their applications in optoelectronic devices, energy harvesting materials and anion sensing, due to their natural Lewis acidity and remarkable solid-state fluorescence properties, have also been investigated. Furthermore, fluorescent triarylborane-based materials have been commonly utilized as emitters and electron transporters in organic light emitting diode (OLED) applications. In this review, triarylborane-based small molecules and polymers will be surveyed, covering their structure-property relationships, intramolecular charge transfer properties and solid-state fluorescence quantum yields as functional emissive materials in OLEDs. Also, the importance of the boron atom in triarylborane compounds is emphasized to address the key issues of both fluorescent emitters and their host materials for the construction of high-performance OLEDs.

A class of sulfonamides as carbonic anhydrase I and II inhibitors.

Four groups of novel sulfonamide derivatives: (i) acetoxybenzamide, (ii) triacetoxybenzamide, (iii) hydroxybenzamide and (iv) trihydroxybenzamide, all having thiazole, pyrimidine, pyridine, isoxazole and thiadiazole moieties were prepared and their inhibitory effects were studied on two metalloenzymes, i.e. carbonic anhydrase isozymes (hCA I and II), purified from human erythrocyte cells by Sepharose-4B-l-tyrosine-sulfanilamide affinity chromatography. These enzymes are present in almost all living organisms to catalyse the synthesis of bicarbonate ion (HCO3-) from carbon dioxide and water. The sulfonamide derivatives were found to be active against hCA I and II in the range of 2.62-136.54 and 5.74-210.58 nM, respectively.

Reversible Doping of a Dithienothiophene-Based Conjugated Microporous Polymer.

Dithienothiophene (DTT) based conjugated microporous polymers (CMPs) were synthesized by bulk and electrochemical oxidative polymerizations. Spectroelectrochemical measurements showed that DTT-CMP can be reversibly oxidized and reduced, accompanied by a significant change of the absorption properties making the material interesting for electrochromic devices. Reversible doping and dedoping of the bulk polymer network was also observed using iodine and ammonia, respectively. Nitrogen gas sorption measurements of the neutral, doped, and dedoped polymer networks indicated the presence of iodide species within the pores, and the conductivity of the networks is highly increased upon doping with iodine. The introduction of the strong electron donor DTT into a conjugated porous network, and the ability for redox switching, make DTT-CMPs interesting materials for organo(opto)electronic devices and sensors.

Bis(vinylenedithio)tetrathiafulvalene analogues of BEDT-TTF.

This review aims to give an overview of the current status of our research on the synthesis of π-electron donor bis(ethylenedithio)tetrathiafulvalene (BEDT-TTF, ET) analogues prepared from 1,8-diketones via a ring forming reaction. The new synthesized π-electron donors have vinyl moieties producing extended π-electron delocalization over the substituent phenyl rings at the peripheries.

A novel thienothiophene-based "dual-responsive" probe for rapid, selective and sensitive detection of hypochlorite.

BACKGROUND: Hypochlorite/hypochlorous acid (ClO-/HOCl) is a biologically crucial reactive oxygen species (ROS), produced in living organisms and has a critical role as an antimicrobial agent in the natural defense system. However, when ClO- is produced excessively, it can lead to the oxidative damage of biomolecules, resulting in organ damage and various diseases. Therefore, it is imperative to have a straightforward, quick and reliable method for over watching the minimum amount of ClO- in different environments. RESULTS: Herein, a new probe TTM, containing thienothiophene and malononitrile units, was developed for exceptionally selective and sensitive hypochlorite (ClO-) detection. TTM demonstrated a rapid "turn-on" fluorescence response (<30 s), naked-eye detection (colorimetric), voltammetric read-out with anodic scan, low detection limit (LOD = 0.58 µM and 1.43 µM for optical and electrochemical methods, respectively) and applicability in detecting ClO- in real water samples and living cells. SIGNIFICANCE AND NOVELTY: This study represents one of the rare examples of a small thienothiophene-based molecule for both optical and electrochemical detections of ClO- in an aqueous medium.

A multifunctional thienothiophene member: 4-thieno[3,2-b]thiophen-3-ylbenzonitrile (4-CNPhTT).

Thieno[3,2-b]thiophene (TT) has been attracting significant attention in the field of organic electronics and optoelectronics. In this study, a useful building block of TT derivative 4-thieno[3,2-b]thiophen-3-ylbenzonitrile (4-CNPhTT), developed by our group and possessing a strong electron-withdrawing 4-CNPh moiety, is reviewed as it has been the source of the development of various organic electronic materials. Some optic and electronic properties are discussed based on electrochemical polymerization of 4-CNPhTT performed using cyclic voltammetry, and spectroelectrochemical measurements are conducted to investigate the optical variations of the polymer film upon doping. Moreover, 4-CNPhTT is clarified by scanning electron microscopy at different magnitudes ranging from 100 to 500 µm, supported by the single X-ray crystal structure. The thermal properties of 4-CNPhTT are investigated by thermal gravimetric and differential thermal analyses. All of the observed properties demonstrate that 4-CNPhTT has the potential of shedding light on the development of new materials for electronic and optoelectronic applications within the TT family.

A unique triple-channel fluorescent probe for discriminative detection of cyanide, hydrazine, and hypochlorite.

Herein, the first triple-channel fluorescent probe, TTB, excited at the same wavelength (λex = 360 nm) in the same sensing medium for the detection and discrimination of cyanide, hydrazine, and hypochlorite, is disclosed. While a fluorescent white color appeared (λem = 470 nm) with the addition of cyanide ion into the probe solution, upon addition of hydrazine and hypochlorite, green (λem = 503 nm) and orange (λem = 585 nm) fluorescent colors, respectively, were observed. A naked-eye detection for the three ions was documented. With the appearance of orange color, a mega Stokes shift of 175 nm was observed. The probe exhibited excellent selectivity and lower detection limits of 0.24 µM, 4.1 nM and 0.27 µM, and dynamic ranges of 0.0-2.0 µM, 0.0-0.05 µM and 0.0-2.0 µM for cyanide, hydrazine and hypochlorite, respectively. The sensing mechanism was investigated through computational studies before and after the addition of cyanide, hypochlorite, and hydrazine, applying density functional theory (DFT), along with the calculation of optical properties by time-dependent DFT (TD-DFT) method. The results were found to be in good agreement with the experimental values. Remarkably, the probe, TTB, successfully detected cyanide, hydrazine, and hypochlorite in complex water samples. Moreover, the detection of cyanide was successfully performed in apricot kernels, as well as hypochlorite in fruits and vegetables.

Monitoring of Hypochlorite Level in Fruits, Vegetables, and Dairy Products: A BODIPY-Based Fluorescent Probe for the Rapid and Highly Selective Detection of Hypochlorite.

Hypochlorite/hypochlorous acid (ClO-/HOCl), among the diverse reactive oxygen species, plays a vital role in various biological processes. Besides, ClO- is widely known as a sanitizer for fruits, vegetables, and fresh-cut produce, killing bacteria and pathogens. However, excessive level of ClO- can lead to the oxidation of biomolecules such as DNA, RNA, and proteins, threatening vital organs. Therefore, reliable and effective methods are of utmost importance to monitor trace amounts of ClO-. In this work, a novel BODIPY-based fluorescent probe bearing thiophene and a malononitrile moiety (BOD-CN) was designed and constructed to efficiently detect ClO-, which exhibited distinct features such as excellent selectivity, sensitivity (LOD = 83.3 nM), and rapid response (<30 s). Importantly, the probe successfully detected ClO- in various spiked water, milk, vegetable, and fruit samples. In all, BOD-CN offers a clearly promising approach to describe the quality of ClO--added dairy products, water, fresh vegetables, and fruits.

Fluorescent small molecules with alternating triarylamine-substituted selenophenothiophene and triarylborane: synthesis, photophysical properties and anion sensing studies.

Two novel D-π-A fluorophores based on selenopheno[3,2-b]thiophene, possessing triphenylamine and 4,4'-dimethoxytriphenylamine units as donors and dimesitylborane as an acceptor, linked through a π-conjugated thiophene spacer (BTPAST and BOMeTPAST, respectively) were synthesized. Their photophysical properties were investigated in both solution and the state of aggregation and compared to those of their corresponding donor parts, having no dimesitylborane units (TPAST and OMeTPAST). All the compounds displayed large Stokes shifts between 100 and 140 nm with positive solvatochromism in solvents having different polarities. While BTPAST displayed both aggregation induced emission (AIE) and twisted intramolecular charge transfer (TICT) characteristics, the others preponderated with TICT effects. The sensing abilities of BTPAST and BOMeTPAST towards different anions were studied. Both exhibited chromogenic and fluorogenic responses to small anions such as fluoride and cyanide, for which the detection limits were found to be 0.12 and 2.43 ppm with BTPAST and 0.59 and 0.92 ppm with BOMeTPAST, respectively. These results provide guidance for the development of novel fused selenophenothiophene sensors in the field of anion sensing.

A convenient green protocol for oxidative esterification of arylaldehydes over Pd NPs decorated polyplex encapsulated Fe3O4 microspheres.

A mild, competent and eco-friendly protocol has been developed for oxidative esterification of various aldehydes over a post-synthetically modified and Pd fabricated chitosan-starch dual functionalized Fe3O4 microspheres as a magnetically isolable heterogeneous and biocompatible nanocatalyst. Molecular O2 was used as an oxidant in the reaction. A series of aldehydes was directly esterified with MeOH in excellent yields without any pre-activation and involvement of harsh chemicals/conditions. Structural features of the catalyst were assessed through FT-IR, FE-SEM, TEM, EDX, molecular mapping, XRD, VSM and ICP-OES techniques. Due to magnetic core, the catalyst was easily isolated using an external magnet and reused for 8 times in succession, retaining its morphology and catalytic activity.

Non-covalent modification of single wall carbon nanotubes (SWCNTs) by thienothiophene derivatives.

Non-covalent functionalization of single wall carbon nanotubes (SWCNTs) has been conducted using several binding agents with surface π-interaction forces in recent studies. Herein, we present the first example of non-covalent functionalization of sidewalls of SWCNTs using thienothiophene (TT) derivatives without requiring any binding agents. Synthesized TT derivatives, TT-CN-TPA, TT-CN-TPA2 and TT-COOH-TPA, were attached directly to SWCNTs through non-covalent interactions to obtain new TT-based SWCNT hybrids, HYBRID 1-3. Taking advantage of the presence of sulfur atoms in the structure of TT, HYBRID 1, as a representative, was treated with Au nanoparticles for the adsorption of Au by sulfur atoms, which generated clear TEM images of the particles. The images indicated the attachment of TTs to the surface of SWCNTs. Thus, the presence of sulfur atoms in TT units made the binding of TTs to SWCNTs observable via TEM analysis through adsorption of Au nanoparticles by the sulfur atoms. Surface interactions between TTs and SWCNTs of the new hybrids were also clarified by classical molecular dynamic simulations, a quantum mechanical study, and SEM, TEM, AFM and contact angle (CA) analyses. The minimum distance between a TT and a SWCNT reached up to 3.5 Å, identified with strong peaks on a radial distribution function (RDF), while maximum interaction energies were raised to -316.89 kcal mol-1, which were determined using density functional theory (DFT).

Chitosan-starch biopolymer modified kaolin supported Pd nanoparticles for the oxidative esterification of aryl aldehydes.

A mild and efficient green protocol has been disclosed for selective oxidative esterification of various aldehydes over a novel Pd fabricated chitosan-starch polyplex encapsulated Kaolin (Kaolin@CS-starch-Pd) as a heterogeneous and reusable biocompatible nanocatalyst. Molecular oxygen was used as an oxidizing agent to generate water as the sole by-product. A wide variety of aldehydes was converted to their methyl esters in high yields. The process involved gentle reaction conditions to avoid any type of pre-activation. Structural features of the catalyst were determined through FT-IR, FE-SEM, TEM, EDX, elemental mapping, XRD and ICP-OES analyses. The material was found to be stable enough toward Pd leaching. Durability of Kaolin@CS-starch-Pd was further justified by retaining its catalytic activity through successful reusability for several times.

Triphenylamine/4,4'-Dimethoxytriphenylamine-Functionalized Thieno[3,2-b]thiophene Fluorophores with a High Quantum Efficiency: Synthesis and Photophysical Properties.

A wide series of 10 new triphenylamine (TPA)/4,4'-dimethoxytriphenylamine (TPA(OMe)2)-functionalized thieno[3,2-b]thiophene (TT) fluorophores, 4a-e and 5a-e, bearing different electron-donating and electron-withdrawing substituents (-PhCN, -PhF, -PhOMe, -Ph, and -C6H13) at the terminal thienothiophene units were designed and synthesized by the Suzuki coupling reaction. Their optical and electrochemical properties were investigated by experimental and computational studies. Solid-state fluorescent quantum yields were recorded to be from 20 to 69%, and the maximum solution-state quantum efficiency reached 97%. Moreover, the photophysical characterization of the novel chromophores demonstrated a significant Stokes shift, reaching 179 nm with a bathochromic shift. They exhibited tuning color emission from orange to dark blue in solution and showed fluorescence lifetime reaching 4.70 ns. The relationship between triphenylamine (TPA)/4,4'-dimethoxytriphenylamine (TPA(OMe)2)-derived triarylamines and different functional groups on thieno[3,2-b] thiophene units was discussed.

Recent developments in the synthesis of regioregular thiophene-based conjugated polymers for electronic and optoelectronic applications using nickel and palladium-based catalytic systems.

Thiophene-based conjugated polymers hold an irreplaceable position among the continuously growing plethora of conjugated polymers due to their exceptional optical and conductive properties, which has made them a centre of attention for the past few decades and many researchers have contributed tremendously by designing novel strategies to reach more efficient materials for electronic applications. This review aims to highlight the recent (2012-2019) findings in design and synthesis of novel thiophene-based conjugated polymers for optical and electronic devices using organometallic polycondensation strategies. Nickel- and palladium-based protocols are the main focus of this account. Among them nickel-catalyzed Kumada catalyst-transfer polycondensation, nickel-catalyzed deprotonative cross-coupling polycondensation, palladium-catalyzed Suzuki-Miyaura and Migita-Kosugi-Stille couplings are the most popular strategies known so far for the synthesis of functionalized regioregular polythiophenes exhibiting fascinating properties such as electronic, optoelectronic, chemosensitivity, liquid crystallinity and high conductivity. This account also presents a brief overview of direct arylation polymerization (DArP) protocol that has shown a great potential to lessen the drawbacks of conventional polymerization techniques. DArP is a cost-effective and green method as it circumvents the need for the synthesis of arylene diboronic acid/diboronic ester and distannyl arylenes using toxic precursors. DArP also puts off the need to preactivate the C-H bonds, hence, presenting a facile route to synthesize polymers with controlled molecular weight, low polydispersity index, high regioregularity and tunable optoelectronic properties using palladium-based catalytic systems.

In situ decorated Pd NPs on chitosan-encapsulated Fe3O4/SiO2-NH2 as magnetic catalyst in Suzuki-Miyaura coupling and 4-nitrophenol reduction.

Chitosan is a linear polysaccharide and non-toxic bioactive polymer with a wide variety of applications due to its functional properties such as ease of modification, and biodegradability. In this study, a green protocol for in situ fabrication of ultrafine Pd nanoparticles on chitosan-encapsulated Fe3O4/SiO2-NH2 nanoparticles, without the use of any toxic reducing agents, is described. The catalytic activity of Fe3O4/SiO2-NH2@CS/Pd nanocomposite was investigated through Suzuki-Miyaura coupling to synthesize biaryl derivatives, and reduction of 4-nitrophenol to 4-aminophenol. The core-shell nanoparticle modified with chitosan highly stabilizes the exterior Pd NPs. Leaching test was performed to assure heterogeneity of the catalyst. The magnetically retrievable catalyst was recycled up to eight times in both reactions without significant loss in its activity.

Concise synthesis of 3-alkylthieno[3,2-b]thiophenes; building blocks for organic electronic and optoelectronic materials.

Four step synthesis of 3-alkylthieno[3,2-b]thiophenes in the literature was reduced to two steps in good yields, through the preparation of the mono ketone, i.e. 1-(thiophene-3-ylthio)alkan-2-one, from 3-bromothiophene and ring formation reaction. This convenient method provides an easy access with good yields to the preparation of 3-alkylthieno[3,2-b]thiophenes, which are important materials for organic electronic and optoelectronic applications. SEM, AFM and contact angle (CA) analyses of their electropolymers on indium tin oxide (ITO) indicated that as the alkyl chains became longer, the polymers provide a more hydrophobic layer with CA up to 107°.