Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 46
Filtrar
Más filtros

Banco de datos
Tipo del documento
Intervalo de año de publicación
1.
Int Microbiol ; 2024 Apr 03.
Artículo en Inglés | MEDLINE | ID: mdl-38568425

RESUMEN

Antimicrobial resistance (AMR) poses a serious threat to human, animal, and plant health on a global scale. Search and elimination techniques should be used to effectively counter the spread of methicillin-resistant Staphylococcus aureus (MRSA) infections. With only a few novel drugs in clinical development, the quest for plant-based alternatives to prevent the spread of antibiotic resistance among bacteria has accelerated. Treatment of MRSA infections is challenging owing to rapidly emerging resistance mechanisms coupled with their protective biofilms. In the present research, we examined the antibacterial properties of ten plant-derived ethanolic leaf extracts. The most effective ethanolic leaf extract against MRSA in decreasing order of zone of inhibition, Cannabis sativa L. > Syzygium cumini > Murraya koenigii > Eucalyptus sp. > while Aloe barbadensis, Azadirachta indica, had very little impact. Mangifera indica, Curcuma longa, Tinospora cordifolia, and Carica papaya did not exhibit inhibitory effects against MRSA; hence, Cannabis was selected for further experimental study. The minimal inhibitory concentration (MIC) of Cannabis sativa L. extract was 0.25 mg ml-1 with 86% mortality. At a sub-MIC dosage of 0.125 mg ml-1, the biofilm formation was reduced by 71%. The two major cannabinoids detected were cannabidiol and delta-9-tetrahydrocannabinol (Δ9-THC), which were majorly attributed to substantial inhibitory action against MRSA. The time-kill kinetics demonstrated a bactericidal action at 4 MIC over an 8-20-h time window with a 90% reduction in growth rate. The results from SEM, and light microscopy Giemsa staining revealed a reduction in cells in the treated group with increased AKP activity, indicating bacterial cell membrane breakdown. These findings suggested cannabinoids may be a promising alternative to antibiotic therapy for bovine biofilm-associated MRSA.

2.
J Sci Food Agric ; 103(2): 479-487, 2023 Jan 30.
Artículo en Inglés | MEDLINE | ID: mdl-35870139

RESUMEN

Currently, modern lifestyle diseases (LSD) such as cancer, diabetes, hypertension, cardiovascular and thyroid disease are commonly seen among people of different age groups. One of the root causes of this LSD is the type of food that we are eating. Staple crops like rice, sugarcane, vegetables and wheat are grown with the application of agrochemicals (e.g., glyphosate), traces of which are found in our food; after that, it gets ultra-processed in factories; e.g., chips and snacks are fried using saturated fats (trans fat); sugar and wheat (derivatives bread, buns, cookies) are processed using toxic chemicals (bleaching agents). As a result, the nutritional value of food is compromised due to low dietary fiber content and synthetic additives - e.g., sucralose (artificial sweetener) - which promotes inflammation and weakens our immune system, causing our body to become sensitive to microbial infection and many other LSDs. To strengthen the immune system, people start taking synthetically prepared supplements and drugs for a prolonged time, which further deteriorates the body organs and their normal function; e.g., prolonged medication for hypothyroidism poses a risk of heart attack and joint pain. Nanotechnology solves the above problems in the food, nutraceuticals and agriculture sectors. Nanotechnology-based naturally processed products such as nano-nutraceuticals, nanofood, nanofertilizers and nanopesticides will benefit our health. They possess desirable properties such as high bioavailability, targeted delivery, least processing and sustained release. With the help of nanotechnology, we can get nutritional and agrochemical-free food. © 2022 Society of Chemical Industry.


Asunto(s)
Nanotecnología , Humanos , Agroquímicos , Pan/análisis , Valor Nutritivo , Estilo de Vida
3.
J Environ Manage ; 317: 115294, 2022 Sep 01.
Artículo en Inglés | MEDLINE | ID: mdl-35751229

RESUMEN

The integration of polymers with biomaterials offers promising and effective nanomaterials with intrinsic and extrinsic properties that are utilized in several applications. The present work reported the development of Polyacrylonitrile (PAN) supported biosorbent (Moringa oleifera, (MO)) which was utilized for the removal of Congo red (CR) dye from aqueous solution. MO loaded polyacrylonitrile (PAN/MO) nanofibrous biosorbent was prepared by solvent homogenization method followed by electrospinning for the deposition of nanofibers. The developed nanofibrous biosorbent was investigated by several analytical techniques such as FESEM, TEM, XRD, FTIR, and XPS to study the material properties along with their control counterparts. The adsorption experiments such as the effect of contact time, effect of concentration, effect of pH, and reusability studies were performed. The adsorption capacity of the nanofibrous biosorbent is ∼52 mg g-1, which is significant as bulk sorbent when compared with other activated carbon in powder form. The adsorption capacities vary with an increase in the dye concentration and obtained ∼88% of dye removal. The adsorption data are validated using the empirical pseudo-first-order, pseudo-second-order kinetic models, and the mechanism involved in the adsorption phenomena was investigated by Langmuir and Freundlich isotherm models, respectively. The biosorbent follows the pseudo-second-order kinetics and Freundlich isotherm, which involves in multilayer adsorption phenomena. In a nutshell, the present work corroborated the importance of bio-based natural sorbent available in nature which can be effectively engineered with polymeric materials for obtaining novel hybrid materials to explore their inherent properties for various applications.


Asunto(s)
Moringa oleifera , Moringa , Nanofibras , Contaminantes Químicos del Agua , Purificación del Agua , Resinas Acrílicas , Adsorción , Rojo Congo , Concentración de Iones de Hidrógeno , Cinética , Contaminantes Químicos del Agua/química , Purificación del Agua/métodos
4.
Biomed Microdevices ; 23(1): 9, 2021 01 15.
Artículo en Inglés | MEDLINE | ID: mdl-33449205

RESUMEN

In this work, an optimized, non-invasive four electrode-based impedimetric sensors have been designed, fabricated, and characterized for measuring the impedance of a biological cell. The impedimetric sensors having four mono-polar electrodes were fabricated utilizing the photolithography technique with gold as the electrode material. Furthermore, the impedance of the electrolyte/electrode interface was simulated by optimizing different parameters, including applied voltage, PBS thickness, and diameter, using COMSOL Multiphysics software for a frequency range of 100 Hz to 1 MHz. Next, the impedance of the fabricated device was measured experimentally using the electrochemical impedance spectroscopy (EIS) technique. Then, the COMSOL data was equated with the impedance obtained from the fabricated devices to realize the feasibility and error percentage (RSE < 5%) of the sensor. The equivalent circuit model for the measured impedance data of PBS was obtained utilizing the ZsimpWin software. Besides, the mathematical relations between the impedance, phase angle and the area of the electrode were interpreted for the fabricated impedimetric sensors. Later on, a real blood sample was also characterized to demonstrate the feasibility and the validity of the proposed technique and the fabricated devices in cell diagnosis.


Asunto(s)
Espectroscopía Dieléctrica , Oro , Impedancia Eléctrica , Electrodos
5.
Mikrochim Acta ; 188(1): 13, 2021 01 03.
Artículo en Inglés | MEDLINE | ID: mdl-33389152

RESUMEN

A fluorescent nanoprobe based on copper nanoclusters (CuNCs) has been developed for ratiometric detection of hydroxyl radicals (•OH) and superoxide anion radicals (O2•-). Two differently luminescent CuNCs, namely cyan-emissive poly(methacrylic acid)-protected copper nanoclusters (PCuNCs) and orange-emissive bovine serum albumin-protected CuNCs (BCuNCs), were conjugated to obtain a hybrid, dual-emission nanoprobe (PCuNCs-BCuNCs) with the corresponding peaks at 445 nm and 652 nm at an excitation wavelength of 360 nm. In particular, the fluorescence peak at 445 nm gradually enhanced with the incremental addition of •OH and O2•-. However, the fluorescence emission at 652 nm was greatly quenched in the presence of •OH, while in case of O2•-, the fluorescence intensity remained constant. The differential response of the PCuNCs-BCuNCs towards •OH and O2•- formed the basis of ratiometric detection. Under optimal conditions, the PCuNCs-BCuNCs exhibited good sensitivity and linearity towards •OH and O2•- with limits of detection of 0.15 µM and 1.8 µM, respectively. Moreover, the nanoprobe exhibited high selectivity for •OH and O2•- over other potential ROS interferences. Besides, PCuNCs-BCuNCs were eventually applied for qualitative and quantitative ratiometric assessment of intracellular •OH and O2•- in L-132 cells. Therefore, this strategy unveils a new potential for copper nanocluster-based sensing of ROS.


Asunto(s)
Colorantes Fluorescentes/química , Radical Hidroxilo/análisis , Nanopartículas del Metal/química , Superóxidos/análisis , Animales , Bovinos , Cobre/química , Colorantes Fluorescentes/síntesis química , Células HeLa , Humanos , Límite de Detección , Microscopía Fluorescente/métodos , Ácidos Polimetacrílicos/química , Albúmina Sérica Bovina/química , Espectrometría de Fluorescencia/métodos
6.
Nanomedicine ; 18: 54-65, 2019 06.
Artículo en Inglés | MEDLINE | ID: mdl-30851439

RESUMEN

Oxidative stress plays a major role in acute pancreatitis (AP), leading to massive macrophage infiltration. Nanoyttria (NY) possesses potent free radical scavenging activity. As reactive oxygen species and inflammation play major role in AP, we hypothesized that NY may alleviate cerulein induced AP. NY ameliorated LPS induced oxidative stress in vitro. It reduced ROS, superoxide radical generation and restored the mitochondrial membrane potential in macrophages. Interestingly, NY reduced plasma amylase and lipase levels and attenuated the mitochondrial stress and inflammatory markers. NY suppressed the recruitment of inflammatory cells around the damaged pancreatic acinar cells. Furthermore, NY intervention perturbed the course of AP via reduction of endoplasmic reticulum (ER) stress markers (BiP, IRE1 and Ero1-Lα), and molecular chaperones (Hsp27 and Hsp70). We, to the best of our knowledge, report for first time that NY can attenuate experimental AP by restoration of mitochondrial and ER homeostasis through Nrf2/NFκB pathway modulation.


Asunto(s)
Ceruletida/metabolismo , Nanopartículas/química , Pancreatitis/patología , Índice de Severidad de la Enfermedad , Itrio/química , Enfermedad Aguda , Animales , Antioxidantes/metabolismo , Biomarcadores/metabolismo , Estrés del Retículo Endoplásmico , Inflamación/patología , Peroxidación de Lípido/efectos de los fármacos , Lipopolisacáridos/farmacología , Macrófagos/efectos de los fármacos , Macrófagos/metabolismo , Macrófagos/patología , Masculino , Potencial de la Membrana Mitocondrial/efectos de los fármacos , Ratones , Nanopartículas/ultraestructura , Neutrófilos/efectos de los fármacos , Neutrófilos/metabolismo , Nitrosación , Oxidación-Reducción , Estrés Oxidativo , Páncreas/patología , Pancreatitis/sangre , Células RAW 264.7 , Especies Reactivas de Oxígeno/metabolismo , Factor de Transcripción ReIA/metabolismo
7.
ACS Appl Bio Mater ; 7(4): 2283-2298, 2024 04 15.
Artículo en Inglés | MEDLINE | ID: mdl-38467474

RESUMEN

Biotechnology and its allied sectors, such as tissue culture, regenerative medicine, and personalized medicine, primarily rely upon extensive studies on cellular behavior and their molecular pathways for generating essential knowledge and innovative strategies for human survival. Most such studies are performed on flat, adherent, plastic-based surfaces and use nanofiber and hydrogel-like soft matrices from the past few decades. However, such static culture conditions cannot mimic the immediate cellular microenvironment, where they perceive or generate a myriad of different mechanical forces that substantially affect their downstream molecular pathways. Including such mechanical forces, still limited to specialized laboratories, using a few commercially available or noncommercial technologies are gathering increasing attention worldwide. However, large-scale consideration and adaptation by developing nations have yet to be achieved due to the lack of a cost-effective, reliable, and accessible solution. Moreover, investigations on cellular response upon uniaxial mechanical stretch cycles under more in vivo mimetic conditions are yet to be studied comprehensively. In order to tackle these obstacles, we have prepared a compact, 3D-printed device using a microcontroller, batteries, sensors, and a stepper motor assembly that operates wirelessly and provides cyclic mechanical attrition to any thin substrate. We have fabricated water-stable and stretchable nanofiber substrates with different fiber orientations by using the electrospinning technique to investigate the impact of mechanical stretch cycles on the morphology and orientation of C2C12 myoblast-like cells. Additionally, we have examined the uptake and distribution properties of BSA-epirubicin nanoparticles within cells under mechanical stimulation, which could act as fluorescently active drug-delivery agents for future therapeutic applications. Consequently, our research offers a comprehensive analysis of cellular behavior when cells are subjected to uniaxial stretching on various nanofiber mat architectures. Furthermore, we present a cost-effective alternative solution that addresses the long-standing requirement for a compact, user-friendly, and tunable device, enabling more insightful outcomes in mechanobiology.


Asunto(s)
Nanofibras , Humanos , Nanofibras/química , Biofisica , Medicina Regenerativa
8.
Biomed Mater ; 19(4)2024 Jun 27.
Artículo en Inglés | MEDLINE | ID: mdl-38871001

RESUMEN

Oral cancer accounts for 50%-70% of all cancer-related deaths in India and ranks sixth among the most frequent cancers globally. Roughly 90% of oral malignancies are histologically arise from squamous cells and are therefore called oral squamous cell carcinoma. Organic polycations known as biogenic polyamines, for example, putrescine (Put), spermidine (Spd), and spermine (Spm), are vital for cell proliferation, including gene expression control, regulation of endonuclease-mediated fragmentation of DNA, and DNA damage inhibition. Higher Spm and Spd levels have been identified as cancer biomarkers for detecting tumour development in various cancers. The current study utilises tannic acid, a polyphenolic compound, as a reducing and capping agent to fabricate AuNPs via a one-step microwave-assisted synthesis. The fabricated TA@AuNPs were utilised as a nanoprobe for colourimetric sensing of polyamines in PBS. When TA@AuNPs are added to the polyamine, the amine groups in polyamines interact with the phenolic groups of TA@AuNPs via hydrogen bonding or electrostatic interactions. These interactions cause the aggregation of TA@AuNPs, resulting in a red shift of the Surface Plasmon Resonance band of TA@AuNPs from 530 nm to 560 nm. The nanoprobe was found to be highly specific for Spm at low concentrations. TA@AuNPs were able to detect Spm successfully in artificial saliva samples. On recording the RGB values of the sensing process using a smartphone app, it was found that as the nanoparticles aggregated due to the presence of Spm, the intensity of theR-value decreased, indicating the aggregation of TA@AuNPs due to interaction with the polyamine.


Asunto(s)
Oro , Nanopartículas del Metal , Neoplasias de la Boca , Poliaminas , Teléfono Inteligente , Espermina , Neoplasias de la Boca/diagnóstico , Neoplasias de la Boca/metabolismo , Humanos , Nanopartículas del Metal/química , Poliaminas/química , Oro/química , Espermina/química , Putrescina/análisis , Espermidina/química , Taninos/química , Resonancia por Plasmón de Superficie , Colorimetría/métodos , Biomarcadores de Tumor/metabolismo , Carcinoma de Células Escamosas/diagnóstico , Carcinoma de Células Escamosas/metabolismo
9.
Anal Methods ; 2024 Jul 15.
Artículo en Inglés | MEDLINE | ID: mdl-39007760

RESUMEN

Nanohybrid based non-invasive biosensing platforms are emerging as promising alternatives to detect biomarkers in complex and diverse bio-fluids toward ultrasensitive point-of-care diagnostics. Herein, we report the development of a highly sensitive, facile, non-invasive, label free, affordable, and innovative electrochemical screen printed immunosensor for identifying CYFRA 21-1, an established and crucial biomarker for oral cancer. Until now, no work has been reported utilizing a titanium carbide Ti3C2 MXene nanosheet and L-cysteine (L-Cyst) functionalized magnetite nanoparticle (MNPs) nanohybrid based immunosensor for electrochemical detection of CYFRA 21-1. The L-Cyst@MNPs/Ti3C2-MXene nanohybrid was synthesized via the co-precipitation method and later deposited on a gold screen printed electrode (GSPE) offering enhanced surface area and electrochemical properties. The nanohybrid modified GSPE was then surface immobilized with monoclonal antibodies (anti-CYFRA-21-1) to fabricate an anti-CYFRA-21-1/L-Cyst@MNPs/Ti3C2-MXene/GSPE immunoelectrode and the non-specific locations of the immunoelectrode were covered with bovine serum albumin (BSA). The spectroscopic, morphological, and structural analyses of the synthesized nanohybrid and the fabricated electrodes were performed using different analytical techniques. The electrochemical studies of modified electrodes were evaluated using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and differential pulse voltammetry (DPV). The fabricated BSA/anti-CYFRA-21-1/L-Cyst@MNPs/Ti3C2-MXene/GSPE immunosensor has shown an excellent limit of detection of 0.023 ng mL-1, a linear detection range of (0.5-30) ng mL-1, a sensitivity of 277.28 µA (ng mL-1)-1 cm-2 and a lower limit of quantification of 0.618 ng mL-1 for electrochemical CYFRA 21-1 determination. Hence, this L-Cyst@MNPs/Ti3C2-MXene nanohybrid could also be explored as a potential candidate for determining other cancer biomarkers.

10.
Int J Biol Macromol ; 242(Pt 3): 124827, 2023 Jul 01.
Artículo en Inglés | MEDLINE | ID: mdl-37207758

RESUMEN

The development of 3D scaffold-based in vitro tumor models can help to address the limitations of cell culture and animal models for designing and screening of anticancer drugs. In this study, in vitro 3D tumor models using sodium alginate (SA) and sodium alginate/silk fibroin (SA/SF) porous beads were developed. The beads were non-toxic and A549 cells had a high tendency to adhere, proliferate, and form tumor-like aggregates within SA/SF beads. The 3D tumor model based on these beads had better efficacy for anti-cancer drug screening than the 2D cell culture model. Additionally, the SA/SF porous beads loaded with superparamagnetic iron oxide nanoparticles were used to explore their magneto-apoptosis ability. The cells exposed to a high magnetic field were more likely to undergo apoptosis than those exposed to a low magnetic field. These findings suggest that the SA/SF porous beads and SPIONs loaded SA/SF porous beads-based tumor models could be useful for drug screening, tissue engineering, and mechanobiology studies.


Asunto(s)
Antineoplásicos , Fibroínas , Animales , Fibroínas/farmacología , Andamios del Tejido , Porosidad , Alginatos/farmacología , Antineoplásicos/farmacología , Apoptosis
11.
Int J Biol Macromol ; 242(Pt 4): 125157, 2023 Jul 01.
Artículo en Inglés | MEDLINE | ID: mdl-37257543

RESUMEN

In the current scenario, the dominance of cancer is becoming a disastrous threat to mankind. Therefore, an advanced analytical approach is desired as the need of the hour for early diagnosis to curb the menace of cancer. In this context, the present work reports the development of nano surface energy transfer (NSET) based fluorescent immunosensor for carcinoembryonic antigen (CEA) detection utilizing protein functionalized graphene quantum dots (anti-CEA/amine-GQDs) and a nanocomposite of nanostructured gold and reduced graphene oxide (AuNPs@rGO) as energy donor-acceptor pair, respectively. The obtained AuNPs@rGO nanocomposite has been characterized by different advanced analytical techniques. The functionality of the biosensor depends on quenching the fluorescence of anti-CEA/amine-GQDs donor species by AuNPs@rGO acceptor species, followed by the gradual recovery of GQDs' fluorescence after CEA addition. The efficient energy transfer kinetics have been envisaged by utilizing the AuNPs@rGO nanocomposite as a dual-quencher nanoprobe that revealed improved energy transfer and quenching efficiency (∼62 %, 88 %) compared to AuNPs (∼43 %, 81 %) as a single quencher. Further, the developed biosensing platform successfully detected CEA biomarker with notable biosensing parameters, including a wider linear detection range (0.001-500 ng mL-1), fast response time (24 min), and a significantly low detection limit (0.35 pg mL-1).


Asunto(s)
Técnicas Biosensibles , Grafito , Nanopartículas del Metal , Oro , Antígeno Carcinoembrionario , Técnicas Biosensibles/métodos , Técnicas Electroquímicas/métodos , Límite de Detección , Inmunoensayo/métodos , Aminas
12.
Int J Biol Macromol ; 253(Pt 3): 126846, 2023 Dec 31.
Artículo en Inglés | MEDLINE | ID: mdl-37717866

RESUMEN

The worldwide prevalence of cancer and its significantly rising risks with age have garnered the attention of nanotechnology for prompt detection and effective therapy with minimal or no adverse effects. In the current study, heparin (HP) polymer derived heteroatom (N, S-) co-doped CDs were synthesized using hydrothermal synthesis method to efficiently deliver natural anticancer compound baicalin (BA). Heparin carbon dots (HCDs) were passivated with polyethylenimine (PEI) to improve its fluorescence quantum yield. The surface passivation of CDs by polycationic PEI polymer not only facilitated loading of BA, but also played a crucial role in the pH-responsive drug delivery. The sustained release of BA (up to 80 %) in mildly acidic pH (5.5 and 6.5) conditions endorsed its drug delivery potential for cancer-specific microenvironments. BA-loaded PHCDs exhibited enhanced anticancer activity as compared to BA/PHCDs indicating the effectiveness of the nanoformulation, Furthermore, the flow cytometry analysis confirmed that BA-PHCDs treated cells were arrested in the G2/M phase of cell cycle and had a higher potential for apoptosis. Bioimaging study demonstrated the excellent cell penetration efficiency of PHCDs with complete cytoplasmic localization. All this evidence comprehensively demonstrates the potency of BA-loaded PHCDs as a nanotheranostic agent for cancer.


Asunto(s)
Neoplasias , Puntos Cuánticos , Humanos , Puntos Cuánticos/química , Polietileneimina/química , Medicina de Precisión , Carbono/química , Heparina/farmacología , Neoplasias/tratamiento farmacológico , Microambiente Tumoral
13.
Int J Biol Macromol ; 253(Pt 6): 127260, 2023 Dec 31.
Artículo en Inglés | MEDLINE | ID: mdl-37802449

RESUMEN

Cancer is a significant health hazard worldwide and poses a greater threat to the quality of human life. Quantifying cancer biomarkers with high sensitivity has demonstrated considerable potential for compelling, quick, cost-effective, and minimally invasive early-stage cancer detection. In line with this, efforts have been made towards developing an f-graphene@Ti3C2-MXene nanohybrid thin-film-based electrochemical biosensing platform for efficient carcinoembryonic antigen (CEA) detection. The air-brush spray coating technique has been utilized for depositing the uniform thin films of amine functionalized graphene (f-graphene) and Ti3C2-MXene nanohybrid on ITO-coated glass substrate. The chemical bonding and morphological studies of the deposited nanohybrid thin films are characterized by advanced analytical tools, including XRD, XPS, and FESEM. The EDC-NHS chemistry is employed to immobilize the deposited thin films with monoclonal anti-CEA antibodies, followed by blocking the non-specific binding sites with BSA. The electrochemical response and optimization of biosensing parameters have been conducted using CV and DPV techniques. The optimized BSA/anti-CEA/f-graphene@Ti3C2-MXene immunoelectrode showed the ability to detect CEA biomarker from 0.01 pg mL-1 to 2000 ng mL-1 having a considerably lower detection limit of 0.30 pg mL-1.


Asunto(s)
Técnicas Biosensibles , Grafito , Neoplasias , Humanos , Biomarcadores de Tumor , Antígeno Carcinoembrionario/química , Grafito/química , Titanio/química , Técnicas Biosensibles/métodos , Técnicas Electroquímicas , Límite de Detección
14.
Food Chem (Oxf) ; 4: 100085, 2022 Jul 30.
Artículo en Inglés | MEDLINE | ID: mdl-35415673

RESUMEN

As per the report of the United Nations, half of the fruits and vegetables loses annually. Industries are trying to reduce the postharvest loss by using coatings. Wax coating is the most preferred way to preserve fruits and veggies. Sometimes wax is mixed with some chemical compounds that are known to be carcinogenic. Recently many edible films have been developed using natural polymers to enhance the shelf life of food. The edible films act as a barrier between the food and the external environment to prevent the direct interaction of food with atmospheric gases and microbes, which reduce the rate of respiration, keeping the food fresh for an extended period. But, the cost of edible biofilms is high and restricted at the industrial level; the local fruits and vegetable vendors are not able to buy such costly biofilms. We have developed the solution for dip-coating and nanofiber coating using a blend of silk fibroin, PVA, honey and curcumin, which is a cost-effective method for fruits and vegetable vendors. The material used for coating is FDA approved. The techniques utilized for synthesizing the biofilm are electrospinning and dip-coating. Coating found to increase the shelf-life of fruits and vegetables.

15.
ACS Appl Bio Mater ; 5(6): 2726-2740, 2022 06 20.
Artículo en Inglés | MEDLINE | ID: mdl-35594572

RESUMEN

Chronic wound healing is a major threat all over the world. There are currently a plethora of biomaterials-based wound dressings available for wound healing applications. In this study, a dual protein-based (silk fibroin and sericin) nanofibrous scaffold from a natural source (B.mori silkworm cocoons) with antibacterial and antioxidative properties for wound healing was investigated. An electrospun layer-by-layer silk protein-based nanofibrous scaffold was fabricated with a top layer of hydrophobic silk fibroin protein blended with polyvinyl alcohol (PVA), a middle layer of waste protein silk sericin loaded with silver(I) sulfadiazine as an antibacterial agent, and a bottom layer using silk fibroin blended with polycaprolactone (PCL). The trilayered nanofibrous scaffold with a smooth and bead-free morphology demonstrated excellent wettability, slow in vitro degradation, controlled drug release, and potent antibacterial and antioxidant properties. In vitro, the scaffold also demonstrated excellent hemocompatibility and biocompatibility. Furthermore, in vivo wound contraction, histological, and micro-CT investigations show complete wound healing and the formation of new skin tissue in a male Balb/c mouse model treated with the scaffold. The antioxidant properties of the sericin protein and SSD-based triple-layered nanofibrous scaffold protect the wound from bacterial infection and improve wound healing in a mouse model. The current study develops a dual protein-based nanofibrous scaffold with antibacterial and antioxidant properties as a promising wound dressing material.


Asunto(s)
Fibroínas , Nanofibras , Sericinas , Animales , Antibacterianos/farmacología , Antioxidantes/farmacología , Fibroínas/farmacología , Masculino , Ratones , Nanofibras/química , Sericinas/farmacología , Seda/química , Cicatrización de Heridas
16.
Biosens Bioelectron ; 195: 113620, 2022 Jan 01.
Artículo en Inglés | MEDLINE | ID: mdl-34560349

RESUMEN

Nanohybrids of two-dimensional (2D) layered materials have shown fascinating prospects towards the fabrication of highly efficient fluorescent immunosensor. In this context, a nanohybrid of ultrathin Ti3C2-MXene nanosheets and silver nanoparticles (Ag@Ti3C2-MXene) has been reported as a dual-energy acceptor for ultrahigh fluorescence quenching of protein-functionalized graphene quantum dots (anti-NSE/amino-GQDs). The Ti3C2-MXene nanosheets are decorated with silver nanoparticles (AgNPs) to obsolete the agglomeration and restacking through a one-pot direct reduction method wherein the 2D Ti3C2-MXene nanosheets acted both as a reducing agent and support matrix for AgNPs. The as-prepared nanohybrid is characterized by various techniques to analyze the optical, structural, compositional, and morphological parameters. The quenching efficiency and energy transfer capability between the anti-NSE/amino-GQDs (donor) and Ag@Ti3C2-MXene (acceptor) have been explored through steady state and time-resolved spectroscopic studies. Interestingly, the Ag@Ti3C2-MXene nanohybrid exhibits better quenching and energy transfer efficiencies in contrast to bare Ti3C2-MXene, AgNPs and previously reported AuNPs. Based on optimized donor-acceptor pair, a fluorescent turn-on biosensing system is constructed that revealed improved biosensing characteristics compared to Ti3C2-MXene, graphene and AuNPs for the detection of neuron-specific enolase (NSE), including higher sensitivity (∼771 mL ng-1), broader linear detection range (0.0001-1500 ng mL-1), better LOD (0.05 pg mL-1), and faster response time (12 min). Besides, remarkable biosensing capability has been observed in serum samples, with fluorescence recovery of ∼98%.


Asunto(s)
Técnicas Biosensibles , Nanopartículas del Metal , Oro , Inmunoensayo , Fosfopiruvato Hidratasa , Plata , Titanio
17.
Front Cell Dev Biol ; 10: 846175, 2022.
Artículo en Inglés | MEDLINE | ID: mdl-36035986

RESUMEN

Human serum albumin (HSA) nanoparticles are promising biocompatible, nontoxic, and non-immunogenic platforms for biomedical applications such as bioimaging and drug and gene delivery. The development of nonviral gene delivery vectors is a great challenge for efficient and safe gene therapy. Sulforaphane (SF) can stimulate the expression of antioxidant genes via activation of a nuclear transcription factor, the erythroid-2 related factor 2 (Nrf-2). Here, we use polyethyleneimine (PEI)-stabilized HSA nanoparticles to stimulate endogenous antioxidant defense mechanisms in lung epithelial cells L-132 through the combinatorial effect of SF drug and antioxidant superoxide dismutase 1 gene (pSOD1 plasmid) delivered by HSA-PEI-SF-pSOD1 nanocomposites (NCs). The developed NCs demonstrated high biocompatibility (L-132 viability, >95%, MTT assay) and high antioxidant activity because of efficient entry of the SOD1 gene and SF-loaded NCs at a very low (3 µg) dose in L-132 cells. A high transfection efficiency of L-132 cells (∼66%, fluorescent microscopy) was obtained with the GFP-tagged transgene SOD1-GFP. We speculate that the antioxidant activity of HSA-PEI-SF-pSOD1 NCs in L-132 cells is due to the initial release of SF followed by subsequent SOD1 gene expression after three to four days of incubation. Hence, the developed HSA-based NCs can be efficient biocompatible nanocarriers for safe and effective drug and gene delivery applications to treat diseases with high oxidative stress due to combinatorial SF and SOD1 gene mechanisms.

18.
Sens Int ; 3: 100180, 2022.
Artículo en Inglés | MEDLINE | ID: mdl-35601184

RESUMEN

A major threat that has surrounded human civilization since the beginning of the year 2020 is the outbreak of coronavirus disease 2019 (COVID-19). It has been declared a pandemic by the World Health Organization and significantly affected populations globally, causing medical and economic despair. Healthcare chains across the globe have been under grave stress owing to shortages of medical equipments necessary to address a pandemic. Furthermore, personal protective equipment supplies, mandatory for healthcare staff for treating severely ill patients, have been in short supply. To address the necessary requisites during the pandemic, several researchers, hospitals, and industries collaborated to meet the demand for these medical equipments in an economically viable manner. In this context, 3D printing technologies have provided enormous potential in creating personalized healthcare equipment, including face masks, face shields, rapid detection kits, testing swabs, biosensors, and various ventilator components. This has been made possible by capitalizing on centralized large-scale manufacturing using 3D printing and local distribution of verified and tested computer-aided design files. The primary focus of this study is, "How 3D printing is helpful in developing these equipments, and how it can be helpful in the development and deployment of various sensing and point-of-care-testing (POCTs) devices for the commercialization?" Further, the present study also takes care of patient safety by implementing novel 3D printed health equipment used for COVID-19 patients. Moreover, the study helps identify and highlight the efforts made by various organizations toward the usage of 3D printing technologies, which are helpful in combating the ongoing pandemic.

19.
ACS Biomater Sci Eng ; 8(8): 3220-3241, 2022 08 08.
Artículo en Inglés | MEDLINE | ID: mdl-35861577

RESUMEN

Over the last decades, three-dimensional (3D) organotypic skin models have received enormous attention as alternative models to in vivo animal models and in vitro two-dimensional assays. To date, most organotypic skin models have an epidermal layer of keratinocytes and a dermal layer of fibroblasts embedded in an extracellular matrix (ECM)-based biomaterial. The ECM provides mechanical support and biochemical signals to the cells. Without advancements in ECM-based biomaterials and biofabrication technologies, it would have been impossible to create organotypic skin models that mimic native human skin. In this review, the use of ECM-based biomaterials in the reconstruction of skin models, as well as the study of complete ECM-based biomaterials, such as fibroblasts-derived ECM and decellularized ECM as a better biomaterial, will be highlighted. We also discuss the benefits and drawbacks of several biofabrication processes used in the fabrication of ECM-based biomaterials, such as conventional static culture, electrospinning, 3D bioprinting, and skin-on-a-chip. Advancements and future possibilities in modifying ECM-based biomaterials to recreate disease-like skin models will also be highlighted, given the importance of organotypic skin models in disease modeling. Overall, this review provides an overview of the present variety of ECM-based biomaterials and biofabrication technologies available. An enhanced organotypic skin model is expected to be produced in the near future by combining knowledge from previous experiences and current research.


Asunto(s)
Materiales Biocompatibles , Bioimpresión , Animales , Materiales Biocompatibles/farmacología , Bioimpresión/métodos , Matriz Extracelular , Humanos , Ingeniería de Tejidos/métodos
20.
ACS Omega ; 6(11): 7605-7614, 2021 Mar 23.
Artículo en Inglés | MEDLINE | ID: mdl-33778271

RESUMEN

Hanging cell culture inserts are most widely used in vitro cell culture devices, which provide a freestanding multichamber setup for various co-culture and triculture systems. Apart from being costly, the commercial inserts do not provide enough choices regarding polymer types and pore sizes. Most importantly, commercially available inserts are two-dimensional multiporous membrane-based devices. Herein, we report a one-step fabrication process of the multifunctional nanofiber-based permeable hanging cell culture insert using electrospinning. These fabricated nanofibrous membranes' attached inserts have advantages such as low cost, ready availability, easy fabrication, tunable porosity, autoclavability, and biomaterial-based nanofibrous membranes. The inserts without nanofibrous membrane can also be reused by autoclaving them and electrospun nanofibrous membrane on it according to the application. We have also confirmed its suitability for extensive use in the field of in vitro cell culture by analyzing its adherence and toxicity results on breast cancer cell line (MCF-7). These hanging cell culture inserts are thus a potent product for various cell culture assays such as cell migration for wound healing, cancer metastasis, and other tissue engineering applications.

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA